Replacing hard drive Seagate

Similar Questions

• Replace hard drive Seagate ST32500641AS

  I have a 9150 Deminsion and crashed the SATA hard drive ST3160828AS.  I am installing a Seagate ST3500641AS in replacement.  I left the rider in place to run 1.5 instead of 3.0.  When I check the BIOS configuration, it shows that I have a ST3500320AS SATA-0.  I'm trying to reinstall Windows XP.  On installation it tells me I have to press F6.  When I do, and then click the 's', he wants a diskette with the top driver.  First of all, I have no disk on this machine and the second, Seagate shows that the pilot must come from the manufacturing of the motherboard.  I entered my Service tag to get a list of what's on the 9150 and there is nothing on the motherboard.  The only thing I see on the motherboard is cRUus.

  If I install without hitting the F6 key and let it continue, when the time comes to START the machine, it shows no. BOOT DEVICE AVAILABLE.  If I use a bootable CD, and once it has started, remove it, Windows XP will come and will work perfectly.  Only problem is, there are several deivces which are not identifiable and therefore do not have drivers associated with them.

  Suggestions as to what to try next would be greatly appreciated.  I tried everything I know to do.

  
  

• HP Notebook P1A99UA #ABL: the replacement hard drive

  Hello

  I need to replace the hard drive of my laptop HP Notebook P1A99UA # ABL

  What size and characteristics of the hard drive should I buy?

  Thank you very much.

  Hello

  Your computer is a HP 15-af148ca:

  http://support.HP.com/HR-en/document/c04791384

  You want to use the same as the original HARD disk, which is a 1 TB hard drive 5400 RPM?

  You can use any standard 2.5 "HDD for notebook computers on the market today. Please buy a faster HARD drive which has 7200 RPM and large cache such as

  http://cplonline.com.au/hard-drives/laptop-hard-drives/Seagate-st1000lx001-1TB-laptop-sshd-w-32GB-NAND-2-5inch-SATA.html

  or more small cache:

  http://cplonline.com.au/hard-drives/laptop-hard-drives/Hitachi-2-5-1TB-SATA3-7200rpm-laptop-hard-drive.html

  Kind regards.

• Cannot complete the recovery process after replacing HARD drive

  Hello

  I changed my hard drive it for 15 days because he showed abnormalities, so I bought a new hard drive Seagate Western brand with the same technical characteristics as the existing hard drive (product for the product).

  I was then on TOSHIBA HDD RECOVERY to burn to CD system recovery disks, then I went to replace the hard drive.

  After the change, I raised my PC with system restore CD.
  The procedure is successfully completed and orders of comments asking me to remove the disk and restart the PC.

  I raise the PC, everything goes well, launch windows, installation of perfect records system then comes the stage of installation and settings of the system here after the error message:

  "Windows Setup could not configure Windows to run on the hardware in the computer."

  Then it asks me to restart, then it comes back every time on this message, I'm stuck on this step.
  I tried to change the mode of the disc source hard 'compatibility' instead of 'AHCI' but it's even worse, it completely without error buggy.

  Please give me an explanation of this phenomenon.

  Sincerely.

  Guillaume

  Have you tried to repeat the whole recovery procedure?
  If this is not the case, do.

  I recommend to format the whole HARD drive and create an NTFS partition.
  Then start the laptop using the Toshiba Recovery disk and start the recovery procedure.

  I read about the problem of disk HARD similar in the past and especially NFS partition creation has helped to solve these problems.

• Quad edition of Envy 17 t-j100: replacement hard drive

  need to replace the disk hard drive serial # [personal information deleted] in my touchsmart Envy 17 t-j100.   Cannot afford to sata now.  Any suggestion where I can buy a compatible to the original.  This is a 1 to 5400 RPM.

  terfig wrote:
  

  ..... Cannot afford to sata now. ...

  Hello

  You MUST use SATA, no choice. You're probably talking about SSD. There are several standard HDD around. I bought one week last disk HARD next to test things-much cheaper elsewhere

  http://cplonline.com.au/hard-drives/laptop-hard-drives/2-5-Seagate-1TB-with-8g-MLC-Seagate-Momentus-XT-laptop-HDD-st1000lm014.html

  http://cplonline.com.au/hard-drives/laptop-hard-drives/Seagate-st1000lx001-1TB-laptop-sshd-w-32GB-NAND-2-5inch-SATA.html

  You can buy WD, Toshiba, Hitachi...

  Kind regards.

• 20-d113w want to: replacement hard drive

  Hi, I looked around the Board for instructions on replacing hard drive. I intend to replace the original sata drive 1 TB with a seagate 1 TB sata3 drive. I know this is probably a stupid question, but just installing the new drive and run the recovery software, or something must be done again disc before I run the software. Thanks for any help you can give

  If you reinstall from the recovery discs set, it will not make a difference.  If you use a cloning software, it may depend on the package.  If you need to reinstall using a Windows disk, it should be able to themselves deploy by asking the user questions.

• Cannot install XP Pro on the replacement hard drive.

  I had to replace the hard drive in my desktop pc and now when trying to install XP Pro on the new drive, Windows Installer States he is not hard drives are.

  I suspect it's maybe because I couldn't install the HDD no operating system drivers.  The hdrive installation instructions say to boot from the Windows installation CD.  Then, when you are prompted for the SCSI or RAID driver to press F6 (which I did) then press S to specify additional devices (which I did).  At that time there installing Windows asks me to insert the "floppy" third-party driver in drive A:.  I have no floppy or the car drive.  I tried to load the CD of drivers in two of my two cd/dvd drives, but it has never recognized the cd.

  I contacted Seagate hdrive manufacturer and they said that my motherboard drivers need be updated so that windows would allow the hard disk drivers be installed from Cd.

  They said either communicate with the provider of the motherboard and ask drivers to a floppy, then buy and install a floppy drive on my pc all them in order to get Windows Installer on this new hard drive.  Another option was to buy a new operating system!

  Hoping someone here knows a reasonable solution to this.  My Win XP Pro version is 2002.  I create a copy of it and integrated SP3 with it and tried to start one, but still, it does not recognize the hard drive.  The hard disk appears in the BIOS.

  Thank you!

  Don

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD)
  and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• A100 replacement hard drive

  I saw the other posts on this but no definitive answer.
  My HARD drive is dying and needs to be replaced. I see the posotion from the LHS is under the Palm drive and there seems to be one removable flap - other posts say there is only one screw to remove, but there is no visible screws under the machine.

  I've changed hard disks on other Toshibas with absolutetly no problem - someone at - it ideas?

  Hello

  Replace HARD drive on this laptop is not simply the procedure. I'm not 100% sure, but the entire Palm rest/Touchpad should be removed first. HARD drive cover is fixed with a screw, but you'll see him only if the Palm is deleted.

  When this screw is removed, hold the HARD drive tab and pull the HARD drive bracket. Next step is to detach the HARD drive from the HARD drive support.
  The device is quite new and first of all, check if the warranty is still valid.

• Toshiba 40L3453DB does not recognize the hard drive Seagate Wireless Plus

  Hello

  I recently bought a hard drive Seagate Wireless Plus. When I connect the hard drive to my computer, it recognizes it's ok and I downloaded movies, music, etc. on him. However when I connect said HDD on my TV and select the media browser, it comes up with the message "no removable disk is connected.

  I looked online but I could not find an answer for my problem, but I noticed a lot of people talking about the format of the hard drive. The hard drive is underway in the Windows NT file system format.

  Any help is greatly appreciated.

  Gary

  Originally posted by Y44KCM
  

  Hello

  I recently bought a hard drive Seagate Wireless Plus. When I connect the hard drive to my computer, it recognizes it's ok and I downloaded movies, music, etc. on him. However when I connect said HDD on my TV and select the media browser, it comes up with the message "no removable disk is connected.

  I looked online but I could not find an answer for my problem, but I noticed a lot of people talking about the format of the hard drive. The hard drive is underway in the Windows NT file system format.

  Any help is greatly appreciated.

  Gary

  There are known limitations when connecting TVs USB hard drives:
  -HDD format is one of them: FAT/FAT32 should work, NFTS (depending on model) probably not
  -in the manual for this model, only the USB keys are hard disks mentioned, none (which require an external power supply).
  USB drives are USB - bus-powered and therefore does not usually cause trouble, while external power supply used by hard drives can lead to problems, this device is not recognized.

  In short: there is not that you can do, in addition to changing the USB device. You can try with the FAT32 format first, but with some probability that also won't work, except for the fact that FAT32 is supported only up to a certain size of drive.

• NB100 - replacing hard drive

  How to replace hard drive Toshiba NB100

  Can someone help me?

  TY

  Sergio

  Post edited by: faggiano

  It is not so easy to change the HARD drive on this model.
  You have to remove many parts like keyboard, screen, cover and screw a lot.
  It's a little tricky, so you should have experience with this.

  As Akuma, go to a local ASP (authorized service provider) has said. They can help you replace the HARD drive.

• Satellite L300D-10 q recovery DVD Can be used on the replacement hard drive?

  Hello

  I was wondering if the DVD Recovery allows to install Vista on a replacement hard drive? The original hard drive is too small at 160 GB contain all the files that I use the virtual operating system image. The disk hard 500 GB of replacement must be large enough for that.

  The reason why I need to Vista, it's that the 32-bit and 64-bit versions of Ubuntu 8.04.1 and 8.10, cause the fan to run at full speed all the time which is very annoying. So for the moment I can only use Linux in a virtual machine.

  I intend to stay with Toshiba, though, as my two latest portable Toshiba Satellite a PII and a PIII still work today, and both have had Linux on them.

  Now, back to my story, I intend to remove the existing laptop, hard drive use DVD recovery to install to external USB 500 GB disk, replace the existing hard drive in starting up the laptop from the USB and copy my data overall. Before you reformat the old drive as external storage, I will replace in the laptop with 500 GB drive and the test so I can boot from the new drive.

  Key question will be the change of equipment, i.e. the new hard disk of 500 GB prevent Vista to install or activate?

  Thank you very much

  Vista itself can handle huge HARD drive sizes, but the question is: the recovery disc will be happy with 500 GB? The laptop will recognize 500 GB?

  I think it will work very well, because the new laptops are released with 320 HARD drive. 500 GB is not far.

  Its a few trial and error unless anyone here has tested a disc 500 GB HARD themselves.

• HP ENVY 14 2020NR: need a recommendation for a replacement hard drive

  Greetings,

  I have an a HP ENVY 14 2020NR with a hard drive died. Blue several screens before the new year, did a complete system restore, which seemed to have fixed things. Unfortunately, after 10 days the blue screens are back. The unit is several years old, and my next step is to replace the hard drive. I have all the data backed up elsewhere and ready DVD restore disc.

  Here are the specs of the drive:

  Hitachi disc HARD 7 K 750-750. P/N H2T7501672S.

  I am trying to identify the right replacement hard drive. Looks like it was 750 GB at 7200 RPM. Some choice out there. Can anyone recommend the correct replacement hard drive?

  Thanks in advance!

  DaniBoy

  Based on the laptop HP ENVY 14 - Maintenance Service Guide, it seems that your computer supports the following readers and more.

  6.35 cm (2.5 in) hard drives (HD) and the SSDS (SSD), 9.5 mm (. 37-in) and thicknesses of 7.0 mm (. 28 - in)
  Customer-accessible
  Serial ATA
  Supports the following hard disk configurations:
  ● 750 GB (7200 RPM)
  ● 640 GB (7200 RPM)
  ● 500 GB (7200 RPM)
  ● 320 GB (7200 RPM)

  Supports the following simple SSD drive configurations:
  ● 128 GB mSATA,
  ● 80 GB, mSATA
  ● 160 GB, SATA

  According to the above information, any hard disk 2.5 "SATA or SSD of 9.5 mm and 7.0 mm profile should work fine. This includes the newer readers who are more capacious.

  Please see Newegg - internal laptop hard drivesfor a few recommendations of HDD and Newegg - internal SSD for a certain number of decent SSD.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

• Replacement hard drive for Portege P2010 - part number required

  Can someone tell me what is the part number for a replacement hard drive for Portege P2010 is? It has the latest version of the BIOS installed, if the capacity of the HARD disk can be greater than the original 30gig?

  Thank you

  Martin

  Hello Martin

  Unfortunately I was found no specific information. If I'm right, this unit needs 1.9 HDD and I think it can be much more expensive as 2.5 standard.

  Check it please this page http://www.laptopbits.co.uk/Database_files/Toshiba_Portege_2000_and_2010_series_spares.htm
  You will find a few pieces of upgrade for your device.

  Good bye

• Satellite C870 - 1 K 1 and replacing hard drive

  Hello

  I would like to replace the hard drive of wonderful this notebook with a hard disk of 500 GB 750.
  How should I proceed with the Windows installed on the original hard drive, the migration to the new.
  I do not have a CD ROM of Windows 8, was not included when I bought the laptop

  Thanks for your help and suggestions...
  Greetings

  Lambert (Belgium)

  If you use your laptop with an original operating system preinstalled, you can create recovery media using pre-installed recovery media creator tool. After replacing HARD drive, you can use this media and reinstall the original recovery image.

  After that your laptop will again have to factory settings.