Replacing the CPU fan

Similar Questions

• Satellite L500 is not start after replacing the CPU fan

  Hi guys, I just replaced my cpu fan because the former was noisy and only working at half speed, I also had a couple of farm of downs due to overheating. The day that I removed the old fan the laptop was working fine and I stopped via the Start button and disconnected power and all the other wires.

  I installed the new fan today, put everything, plugged in the power cable, power led ok, ok... hold the power button led charge, led came to start on, turning on the fan, no hard drive does not display goes out again in 20 seconds, only power led and led load display.

  Unplugged all, disasembled and checked all my connections were ok, tried, always the same problem, checked the fleas memory sharp and even cleaned for hard drive always the same problem...
  Anyone out there who can help me please...?

  Best regards, Hans

  Did you remove the CPU or have you checked if its places correctly?
  Have you added the cooling grease after removing the cooling module?
  Hmm, but it looks like a little you damaged the Council why disassemble unit.

• Pavilion 423.teleglobe uk replacing the cpu fan

  Hi, first post so hope gives enough information.

  The CPU fan above radiator has a missing Blade (no idea what happened and not in the case!).  The computer has been used very slow for a few months and this may have a role to play.  I formatted and replaced Windows XP a few times and always very slow.

  I tried to get a replacement without success and I was wondering if anyone can help on where to get a new?

  Thanks in advance

  livingstonc wrote: thanks for the quick reply, almost there now with replacement and without your help would always look. Can get one of US not UK, but before I do, like that of the UK and you want thoughts so well?

  http://www.eBay.co.UK/ITM/Coolermaster-silent-led-80mm-fan-SAF-S83-E1-GP-/170750498007?PT=Computing_ComputerComponents_Fans_Heatsinks_SR&hash=item27c185d4d7

  Thanks again.

  Hello livingstonc, I'd be a bit wary of this model, because it has only 2 000 rpm and speed to other Coolermaster is 2 500 rpm. This may not provide enough air cooling of the CPU under load.

• Pavilion Dv6: Replace the cooling fan

  I need to replace the cooling fan. Please provide the manufacturer for notebook described below.

  Pavilion Dv6-6135TX

  Product # QC328PA #ABG

  Processor: Intel Core i7-2630QM CPU @ 2.00 Hz

  Installed memory (RAM live): 8.00 GB

  Thank you in advance!

  Dear customer,

  Please try the steps below to determine the size.

  1. Open the control panel.
  2. Select display.
  3. Select the screen resolution.
  4. Select Advanced settings.
  5. Select the map tab. Here, you'll see how much of total graphic memory available with dedicated video memory is available on your system.

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Doesn't let me change the Cpu fan!

  Hey guys,.

  My cpu hp craped out fan and I tried to buy another fan I removed the old an and replace now the new fan will only work 830 RPM compared to the former which took place in 1800 as soon as the computer I tired about three different fans, it seems that he wants only foxxcon fan to work right so my question is How can I change the cpu fan with a one outside the foxxcon aftermartket because I can not find the same! model is a P6000 P6741f series!

  really want your help, I won't heat my cpu!

  Thank you!!!

  Ryan. D

  Therefore, replace the fan with a new and new thermal interface materials.

  Check the time against the maximum allowed for your CPU. Temperatures 10 degrees cooler (in degrees C) thean max when you run a game requiring high graphics so stop worrying.

• E153sa Pavilion 17: replace the cpu

  My laptop does not start. No fan, nothing.
  Only flashes on the SHIFT key, which I understand as a code of non-functional CPU.
  Only 18 months but old warranty.
  From the manual, it looks like I can replace the CPU. If Yes, approximately what is the approximate cost of UC and what options for a compatible CPU are there?
  Also, where is the best place to buy one?

  Thanks for the reply.
  
  Not really what I want to hear, because it is not conclusive. I agree with you, however, so try a motherboard first. I cross my fingers.
  
  Thanks for the links.
  
  Steve

• «the cpu fan works not.» Check the fan connections and call for service. »

  I was wondering if a failure of different from 'CPU fan has failed... system in a few seconds will stop. " I have an office of DX - 2000 P4 under XP SP3 that I just changed the motherboard and CPU fan on. All the fans are running at about the same speed. (P/S, chassis and CPU). Not very fast but cannot see the fins. Computer sat for several years. I was wondering what is the real test and how the fan speed is controlled. I suppose that temperature sensors built into the cpu, somehow, there must be a variable voltage applied to the fans to change their speed and/or a measuring device to see what is their RPM. This must be controlled by the BIOS as is any pass/fail test. My next step is to replace the old fan and see what happens. I have a new p/s to install should be here today. Actually used, but cleaned up and tested. Economy of cleanup. Not sure if my older diet could be the cause of the issue with low Volt.

  If the fan is slower than the factory fan, you will have this problem.

• The CPU fan surge

  I have a Dell Studio XPS 8100 running Windows 7 that is about 5 years old.
  The CPU is a Core i7 processor 870 2.93 GHz.

  The CPU fan has recently begun to speed in full progress. After starting, it may take up to two hours for this outbreak taking place.

  Here's what I've tried so far:
  1. diagnostics Ran Dell hardware illustrated trouble-free.
  2. open the computer and look for the dust problem. Current minimum dust. I cleaned up what was there. Also, I removed the CPU cooler-fan and sitting with the new thermal paste.
  3. I checked the BIOS. It has the latest update.
  4. I have recently started using safe and noted it was more all this CPU fan after a few days of operation in full progress. After you restart normally, fan surging stood again after an hour.

  Any ideas on fixing this problem would be greatly appreciated. Should I try re-flashing the bios? I've got a new CPU cooler fan. Is it useful to replace the old unit.

  This is probably caused by recent updates of Dell Data Vault and SupportAssist. Many other users have exactly the same problem on various models of PC.

  Dell is working on a fix. In the meantime...

  1. Press Windows + R and run "msconfig" (without the quotes)
  2. Click on the Services tab
  3. Find "Dell Data Vault.
  4. Clear the check box
  5. Click on the Startup tab
  6. Find Dell 'SupportAssist' and uncheck the box
  7. Reset
  8. You can get advice on "Selective startup", but simply to cancel the notice.

  Stay tuned for a solution that will allow you to check these boxes again and re-use Data Vault and SupportAssist (if you want or need them).

• How to disassemble the Qosmio E10 to replace the cooling fan - need manual

  Does anyone have instructions on how to disassemble the E10 to replace the cooling fan. a G25 irisvista.com all the other models, but the design is not the same.

  Now stuck at removal of keyboard connector.
  No idea what fan model numbers so I can order before the band down.

  Hello

  Unfortunately, it seems that there is no information on fan replacing on the laptop of the G10. These documentations are not for public use, but only for the Toshiba authorized service providers :(

  Apart from this fact it s not advisable to disassemble this laptop if you have no experience! During the disassembly process, you could damage the motherboard or something else

  So I think that he of better go to a technician because he has more experience.
  In addition, the taken cooling module supported and compatible can be ordered from the Asp in your country

  have a nice we

• HP a1250n, radeon xpress 200 question after replacing the CPU, Standard VGA Graphics goes not down

  Recently, I messed up my CPU and bought a replacement (exact same kind). I am running windows 7 ultimate and for about 6 months prerequisites with no problems. After replacing the CPU I get intermittent lock ups, sometimes with a small portion of the screen flashes. I say intermittent but at least every 15-20 minutes. Different programs, different habits, but still the screen freezes.

  I went in and deleted the driver under graphics cards, pick a 'completely remove the option' - it after restarting the system on its own charged for a Standard VGA Graphics Adapter and since there is then no more accidents. Of course the functionality is not as complete, large icons and such, but it works.

  If it certainly seems to point to a driver conflict I think. But for this machine, is there ever any single Vista Windows 7 driver. My skills are not so, but I'm moving.

  Any guidance?

  Hello

  Yes, your PC has integrated graphics controller: ATI Radeon XPress 200, we don't find drivers compatible Windows 7 ATI.

  The BEST OPTION: Buy a video card, then insert it into slot PCI Express 16 on the motherboard to better display and multimedia performance with Windows 7 to a value using else, it looks just like Windows XP

• Satellite A10 S203: the CPU fan does not work properly?

  I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

  Hi SACRIFICE them.

  Here are some possible solutions to this problem of fan.

  1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

  2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

  If please check this and an answer then follow the next step!

  CAMPino

• After replacing the CPU, I can't start my Satellite S1400-553 s

  Hello

  I opened my Toshiba laptop to replace the CPU a newer version, among other items recovered another satellite, when I replaced the and closed it up that I do not have to be initialized now.

  When I press on the power button the floppy drive makes a noise for a second slot and turns off again and the yellow power LED cable lights.

  I put back the original parts in the machine, but I still have the problem.

  Any idea of what s upward?

  Thank you
  Rob

  Hello Rob

  I agree with Johnny. You have probably damaged the mainboard. Replacement of the CPU part of the very sensitive laptop and most people make mistake and CPU burn out. You are a technician or is the replacement of material your hobby?

• Satellite C670d - 11 k - can I replace the CPU?

  Can I replace the CPU on my 11K satellite C670D help please

  Hello

  The chipset is AMD A50M, so you can ONLY use AMD processors that are supported by the chipset.
  But it is still open question whether the BIOS would support the new processor.

  Since updates are not official supported by any laptop manufacturer, you will not find this info anywhere...
  If these updates are at your own risk, and no one would be able to tell if the laptop would be stable after this upgrade the CPU.

• Replace the CPU in Satellite M70

  Hello

  I would like to ask if it is possible to improve and replace my old laptop Satellite M70 with a new CPU dual core.
  And if it is possible, it is recommended to witch one?
  I would be glad of any help. ^ THX ^.

  + My Satellite M70 technical data: +.

  + OS: + Windows XP Home Edition (5.1, Build 2600) Service Pack 2
  + The system manufacturer: + TOSHIBA (who else)
  + System model: + Satellite M70
  + BIOS: + Ver 1.00PARTTBL
  + Processor: processor Intel (r) Pentium (r) M 1.73GHz +.
  + Memory: + 2046 MB RAM
  + Motherboard: + TOSHIBA HTW00

  + Peripheral screen +.

  + Card name: ATI MOBILITY RADEON X 700 (Omega 3.8.360) +
  + Memory display: + 256,0 MB

  + Sound: Realtek AC97 Audio +.

  Post edited by: Lutzi

  Hello

  Unfortunately you can not replace the CPU existing with a "new dual core CPU" because your system is not designed for dual-core cpu´s.
  There are many arguments why not replace the cpu, the most important argument is that the dual core cpu mechanically and electrically fit on the motherboard.

  So, if you want a faster machine then buy a new one because you won´t have additional options to update your computer.

  Sorry, but that's all :/

  See you soon

• What can replace the cpu T7200 to the Mac Mini 2.1 end of 2007?

  What can replace the cpu T7200 to the Mac Mini 2.1 end of 2007?

  http://www.iFixit.com/Guide/installing-Mac-mini-model-A1176-core-2-Duo-processor/1178/1

  Expandable up to an Intel Core 2 Duo 2.33 GHz T7600.