Replacing the power supply on a HP Pavilion P6000

Similar Questions

• Replace the power supply on my m9340f

  Hello

  I own a Pavilion Elite m9340f and I need to replace the power supply (it has the original), because the power on button failure, which I did research on forums and the solution replaces the power supply (psu led always on, for example).

  But I need to know exactly what kind of food I buy (amp, voltage, PIN number, dimensions, etc.) because I need help on the specifications.

  I'm not planning to upgrade the motherboard the case, original hp. I read in another post something on the power restriction and benicia supporting more than 450 watts power supply motherboard. I find this absurd information, because components draw necessary power from the PSU without worrying if it's 350 or 700 watts. So is one of the things that I need to be confirmed if there is restriction of power.

  Thanks in advance,

  Prince of Jeronimo Ramos

  Jeronimo, welcome to the forum.

  I believe that any standard ATX PSU must be inserted into the case.  I like Corsair and OCZ.  They are excellent manufacturers.  I suggest to measure the PSU existing and comparing measures to whichever you choose.  As far as I know, there is no restriction on the power.  I did this for a long time.  More than 550W to 600W in your computer is not necessary, however.

  If your problem is solved, please click "accept as a Solution.

• CPU constantly tries to reboot - just replaced the power supply - and can't get into Windows at all the

  I replaced the power supply 2 weeks ago and left the computer.  Follow me up one morning, the computer froze and when I tried to reboot, it whirs and stops... 5 seconds later same thing.  The power button lights up orange... someone can give me an idea of the problem?  Defective power supply replacement?

  Hi Cathy,.

  This seems to be a hardware failure. You must get in touch with the manufacturer of the system or the local Techshop for better assistance.

• Can I replace the power supply on my desktop dell?

  I have the dell Inspiron 3847-3850BK and it's an inspiron with i3 processor. And my question is, can I replace the power supply on this desktop computer... The PSU is a l300nm-01. And also the PSU, I own the ATX form? NOTE: NOT THE MINI TOWER.

  Skrullknight

  I have the dell Inspiron 3847-3850BK and it's an inspiron with i3 processor. And my question is, can I replace the power supply on this desktop computer... The PSU is a l300nm-01. And also the PSU, I own the ATX form?

  Skrullknight

  Yes, the Dell Inspiron 3847 Mini-Tower can use generic power supplies ATX, with either a power connector 24 pin or 20 + 4 pin card mother main, with or without the on/off switch.

  You should be able to buy a compatible power supply either a local computer or online store.

  Note: You need a diet with four SATA power connectors.

  Bev.

• Replace the power supply for a Pavilion a140n

  How to install a new power supply in a HP Pavilion a140n? Is there a step by step guide?

  Zz30fg, welcome to the forum.

  Is the model you list correct?  I can't find anywhere.

  Before you start, I suggest that you measure existing power supply unit (PSU) to make sure that the one you choose to insert in the space provided.

  The first thing you will do is turn off the computer.  Disconnect all devices that are connected, for example, keyboard, mouse, printer, etc.  Once done, remove the side cover of the case.  There are two or more screws on the back of the computer that you have to remove.  Then slide the side gently to the rear.  Put it somewhere safe.   Be sure to touch the metal inside of the case before touching any components.  This will eliminate static electricity (ESD).  Now you can disconnect the cables from the PSU.  This is where it gets a little tricky.  I normally take a picture of the connections and mark them as clearly as possible on the motherboard.  Believe me, you'll be much happier if you do.  Once this operation is complete, it is time to remove the (4) screws that hold the power supply in place.  Hold it with care.  If it falls it can damage other components.

  The new power supply will be marked with the appropriate connector cables.  At this point, it's just the opposite of what you were doing to uninstall the existing PSU.  Install the power supply into the case.  Do not overtighten the screws.  Make sure that the cables are inside the case.  Once in place, carefully connect all cables to the appropriate connectors.

  If you have any other questions, I will watch this thread for you help.

  If your problem is solved, please click "accept as a Solution.

• Replace the power supply, computer does not turn on

  I had a Seasonic SS 560 KM power supply for my HP Pav e9280t.  I removed the old power supply while keeping the power cable is plugged in.  Then replaced each power cables one at a time in the new power supply and finally he attached to the tower.

  Now when I try to turn on your computer, it just boots barely upward.  I can hear the fans kick on for a second or two, then everything just stops.

  Since I replaced the cables one at a time I don't think I missed anything; MoBo, Fan of MoBo, 1 optical drive, disk HARD 2 and 1GPU.  The tower is open and I can see the fan, the fan GPU MoBo and PSU fan all hang on one second so that they get the right power?

  I must have missed something or possibly faulty PSU?  Any help will be appreciated.

  Hello Chadow86, it is possible to the new power supply may be faulty. I would check double all the connectors again.

  Since you mentioned the fan to the motherboard, it would not be necessary to unplug the CPU fan when you changed the power supply. The CPU fan power source comes from the motherboard and not directly from the power supply. I don't know what fan on the motherboard you are talking about.

  I watched the specifications and photos of the new power supply. It is a modular design. I would check the cables connected to the power supply to make sure that they are in the correct connectors.

  If the system still does not start, the cause could be a new power supply faulty.

  I hope this helps.

• Replace the power supply in a Studio Slim s 540

  Hi, I bought a 540 s Slim of Studio in November 2009 and now I've decided I want to make games a bit. However, it runs a little hot, and there is not enough energy for a new card. I think I have a power supply that is 300w.

  I was watching a GTX 460 or ATI 5850. The 5850 is probably too much for the case. So I thought to replace the case by something simple but effective. I like this:

  http://www.Newegg.com/product/product.aspx?item=N82E16811119137&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-_-RSSDailyDeals-_-na-_-na&aid=10521304&PID=3136390&SID=

  This case should be quite good, with the addition of a fan or two perhaps.

  Now to my next problem. I keep everything in the Studio Slim to the stock, the Quad Core, 6 GB of ram, etc. The only thing that changes is the power supply and graphics card. However, I've heard Dell Mobos/PSU are owners and making it difficult to replace PSU. I have need around a block power 400w-500w. What is compatible with the dell motherboard chipset? Help would be appreciated, thanks.

  Some of my features, if it helps:

  Motherboard: Dell 0M017G A00 P45/P43 chipset
  CPU: Intel Core 2 Quad Q8300
  RAM: Twin 400 mhz (DRAM frequency) 6 GB DDR2 memory
  HARD drive: Western Digital 7200 RPM 32 MB Caviar Black

  PSU: bed 10A 125v so I think that its to 300w?

  deuce985

  The Studio 540 Slim has a 250w power supply.

  The power supply is a standard ATX format, but due to the constraints of the 540 Slimline case, it is a unit of owner of Dell, due to its shape, size, and the wiring harness.

  If the motherboard has been installed in a box ATX Mini/Mid Tower standard, more generic standard ATX power supplies can be associated, either a 24-pin or 20 + 4 pin main card mother power connector, with or without the on/off switch.

  You should be able to buy a compatible power supply either a local computer or online store.

  Note: You need a diet with four SATA power connectors.

  Bev.

• I want to replace the power supply and graphics card in my p6550z

  Hello

  I'm looking to replace my power supply (BESTEC 300 watts) and the graphics card (ati radeon hd 5450). Here is a link to the HP page with my pc: http://h10025.www1.hp.com/ewfrf/wc/product?product=4242359&lc=en&cc=us&dlc=en&lang=en&cc=us

  The card I want to put is an Amd Radeon HD 6870. And I also want to put in a block of power SUPPLY Corsair 550 Watt.

  They will work when I install them? (I'm actually a little nervous about the upgrade my power supply and graphics card since it is the first time I'm doing this) (I'm also nervous because I've heard many horror stories about upgrading an HP computer)

  Hello

  There is a small metal tab inside (guts) on some models of PC HP adds stability to food. You'll have to push the tab down to get food out.  The link below will show this tab.

  How to replace a power supply.

  How to replace a video card.

  Corsair power supply (psu) I used can be mounted with the fan facing upwards or downwards depending on where fresh air is available from. Some PC cabinets have mesh ventilation where the PSU Monte so the fan should face the ventilation mesh so that fresh air can be brought into the power supply and then exhausted at the rear. Some HP computers have slots to air ventilation through the upper edges of the flanks and in this case, the PSU is mounted to the top fan. Otherwise, the Assembly of the fan should be such that the PSU will draw air from inside the Cabinet.

• How to replace the power supply VAIO VGN-CS115J?

  Hello

  The power cord on my VAIO VGN-CS115J computer works correctly, but the power supply on my is broken.

  How can I get my fixed Power Jack?

  Friendly greetings,

  Jussi Yrjänä

  Zealious,

  It seems you need to remove the bottom case at least to get access to the DC Jack.  You may need to remove more pieces to remove it.  The p/n DC Jack is A-1609-073-A and can be ordered through Sony parts @ 800-488-7669 (US models).

• Inspiron 531 does not completely start upward after replacing the power supply?

  Hey people. This Inspiron 531 since 2007 and he has been a champion for me. In the past months, the power supply fan start getting real loud (intermittently) so I finally looked around and found the same feed Integrator Delta on ebay. Put him in this afternoon very carefully, but while doing the 'blue' cable hard drive that connects to the motherboard is out the motherboard. There are two connections on the motherboard, SATA 0 and SATA 3. I have no idea who it was so I tried it reconnection to SATA 0 (which was blue too) and all turned on. There, I sat on the DELL screen and no full boot. Shut down and tried the SATA 3 connector and basically the same thing has happened although there was some funky boss on the lower part of the screen and still no full boot.

  Any ideas or suggestions?

  Updated - I should also mention this power connectors P4 and P7 were not used until I swapped out.

  And also when I try and start I get the DELL screen that shows the F2 and F12 Boot Menu on the top right of the screen.

  jodeluxe

  The primary C: / SATA HDD, is connected to SATA 0 connector motherboard.

  Are the P1 24 pins and power connectors 4 pin P2, connected to the motherboard?

  Have you tried to remove and reinstall all the memory modules and the power data cables in front and all the readers and motherboard, to see if that makes a difference.

  Check the power LED button reading, is stable blue, flashing blue, Orange fixed, blinking Amber?

  Are there any 'beep', if there is, please publish the sequence of them?

  The Inspiron 531 Manual of use and troubleshooting is here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-531_owner%27s%20manual_en-us.PDF

  Bev.

• Replace the power supply for Tecra 8100

  Hi supports,

  I have Tecra 8100 where his original power supply is dead. I need to buy a new one, but I found that Toshiba has replaced the model of PA2444U adapter with a new model. What model adaptor which is now compatible with Tecra 8100?

  Thank you. I really need an answer because I need to work with the laptop.

  Hello

  You need universal adapter with PA2444U part number. Google around and you'll find it.

• Xw4400: I replaced the power supply in my xw4400, always beep

  Hello

  My power supply died a week ago.  I know because she gave me a code 4 sound.  I followed the troubleshooting instructions, and when it is connected with all the cables disconnected, the fan does not turn.  Thus confirmed dead.

  I got the new power supply today, and I plugged it in with no cable attached.  The fan spun.  Power has confirmed the good.

  However, when I put back in place and turned on, I got the code of four beeps again.  Does this mean that my motherboard is fried?  And if so, where the Board of Directors is the id so I can order another?  I have the dual core intel cpu if that helps at all.  Not the extreme, just the duo.

  Thanks in advance for your help.

  After I plugged in a monitor, I doscovered that the computer was in the way of the message and then affected by the thermal shutdown.  Replacement of the entire radiator and fan made me a work computer.

  The problem was a bad video card.  For some reason, nor Council picked up the problem.

• The upgrade of the power supply for a HP Pavilion 500-054

  Hey people,

  I'm changing the 500-054 flag so that it can play a few games, not a hardcore gamer, just want to be able to play the occasional game. I want to get a lower end external video card, but this requires a power supply greater than 300. I am looking for a new power supply for my computer, but I couldn't find one for the 500-074. Are the ones that will work for my computer or I am a hopeless case?

  Thank you

  A standard ATX power supply will work. Please look at the Corsair CX430, CX500, CX600, or their variations of modular cables for your needs.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Satellite Pro 480cdt: how to replace the power supply and memory?

  I broke the tip of the power where it goes to the back of the computer. The two pins came away from the cable. What is the size of the plug round I am looking for as a replacement? Assume that there is a standard fitting of Toshiba.

  The right size to upgrade as the memory is 128 MB. He got 64 MB it's 2 x 32 MB. I guess we're soldered in, but I can remove the other 32 MB and put the 128.

  Are these modules memory square-shaped?
  Finally, a link to the service manual would be very helpful.

  Thanks in advance.

  Hello

  It's really an old unit and it is not easy to find a lot of information. I found the info that this device can use 160MO max. Module of RAM compatible RAM are:
  16 MB PA2039U
  PA2040U 32 MB
  48 MB PA2041U
  128 MB PA2042U
  I don t really know where is placed expansion slot memory but check the underside first. Otherwise, that it may also be placed under the keyboard.

  Replacement of plug power is a bit complicated, and in this case I can't help you at all.

  In any case good luck with your oldie!

• How big a video card I can install without replacing the power supply?

  I have a Pavilion Elite m9280.sc - has.

  Also have a Creative Audigy Gamer card installed in the PCI slot.

  Can also be upgraded hard drives, one for the SSD and the other for more storage. Don't know if that will eat more power.

  So, how many Watts is maximum for a replacement of the Geforce 8800 GT, where the system remains stable and fans can handle the heat?

  I discovered that I can easily put in a 110 Watt GFX card. Ty for the reply.