Replica transitions during my background generator

Similar Questions

• Keynote: delays of 14 seconds before the transitions during playback

  Hello

  I am putting together a Keynote presentation for an event. During the test/read the file, I get a huge 14 second delay before the slide transitions occur. The timer stops and then continues, as well as playback of the presentation, 14 seconds later. I saw the same presentation on iMac a colleague and the presentation is seamless - no delay (unless specified by me of course!). I use Keynote a lot, so I am confident that these delays are not of my own making.

  I use an iMac (retina 5K, 27 inches, end of 2015), with a processor 3.2 GHz Intel Core i5 and DDR3 8 GB 1867 MHz memory.

  Version of Keynote is 6.6.2

  The speech and the software system is completely up-to-date (I've updated everything in the hope that it could solve the problem).

  All proposals/solutions would be appreciated as I am quite confused.

  Thank you

  Gareth

  I'll answer my own question, just in case someone else has the same question; I forgot to mention that I use a dual display configuration - my second monitor is a Benq 24 "HD. I noticed that when I have the browser on the Benq and reading on the screen of the iMac, I'm late, but when I swap them so that the browser or on the iMac and playback of the presentation on the Benq, I don't get the problem.

  This seems to be a bug. Someone else this experience?

• First bug Pro: cannot apply default transition during the sequence with keyboard navigation

  Hey everybody, it seems that I stumbled upon a very strange bug/problem in first Pro CC 2015.0.2 on OS X 10.10.5.

  Please check the 2 screenshots below and then please read my description of this problem down below the screenshots.

  

  

  In TWO screenshots, my head is in the EXACT SAME PLACE on the timeline of the sequence.

  But the 1st screenshot, I am UNABLE TO SELECT "apply video Transition ' or 'Apply Audio Transition', I am able to use their keyboard shortcuts. This is the bug/problem. I expected to be able to select the items and I expected to be able to use their keyboard shortcuts. But as you can see, they are completely gray.

  In the 2nd screenshot, everything works normally... everything as it should. The "apply video Transition ' AND 'Apply Audio Transition' are available to me, just like usual.

  So, what is the difference between the 2 screenshots?

  Screenshot #1, I started to play the sequence by pressing the space bar, I went through the edit point, and then I stopped the sequence by pressing the space bar again. Then, I pressed up arrow on my keyboard to replace the playhead in the edit point that I was coming. But when I use the keyboard to navigate in the sequence of this way, 2 menu options "apply video Transition ' and 'Apply Audio Transition' are not available! For some reason when you use your keyboard to navigate in your sequence in this way, it doesn't allow you to apply default video or audio default transitions (from the menu or their keyboard shortcuts). First Pro NEED that MANUALLY drag you these transitions of the Panel "Effects".

  Capture screen #2, all I did to fix this was CLICK ONCE with my my mouse ANYWHERE IN THE SEQUENCE itself. By clicking in the sequence, suddenly these 2 menu options becomes available to me. All we needed was a little tiny mouse click to fix this bug/problem. But of course, it is the problem... I'm sailing in Adobe Premiere Pro with my keyboard instead of my mouse, so it defeats the purpose of navigate the application with the keyboard if I constantly have to click in order for every single edit point.

  PLEASE NOTE that my sequence was ALWAYS 'the active Committee', you can tell by the blue outline around the sequence itself. If this problem is not caused by the sequence is not not the 'active' Panel before attempting to apply these default transitions.

  Any thoughts on this topic?

  Thank you

  Scott

  Hi Scott,.

  Hey everybody, it seems that I stumbled upon a very strange bug/problem in first Pro CC 2015.0.2 on OS X 10.10.5.

  Please check the 2 screenshots below and then please read my description of this problem down below the screenshots.

  Any thoughts on this topic?

  There are some overall unexpected behavior going on here, but I also see some of the things in OS X 10.10.5. Please file bugs here. He does not behave reliably if editing is enabled, however.

  One thing you might try puts in place a shortcut to "select the closest point edition like Roll. This should you configured to add a default transition with the keyboard.

  However, I found that on Mac OS X, I have to press the command twice to

  1. Place the head of the edition and
  2. to select the edition

  This also seems to be a bug. It should move both the playback head and select the edit at the same time. At least it's what I expected. I'm going to give this one as well.

  Sorry for all the trouble.

  Kevin

• Creating points hot header during image background

  I have created this site www.cassiels.com and want to add hot spots to the header on the Dove and the words.

  How can I do this? My image in the header is as background because when I insert it as an image, it doesn't line up.

  OR how do my image smooth line up and rinse to the header so I simply insert an image?

  Thank you.

  I have created this site www.cassiels.com and want to add hot spots to the header on the Dove and the words.

  How can I do this? My image in the header is as background because when I insert it as an image, it doesn't line up.

  OR how do my image smooth line up and rinse to the header so I simply insert an image?

  Think about it - your page has no content to this topic.  It is one of the most valuable pages throughout the site, and you have no content there.  Usually, this would be considered a serious mistake in terms of usability and SEO.

  Anyway, you can not put a point of interest on a background image.  At worst, you could put just a picture PNG or transparent GIF with the correct size so that it is higher up that spot and put the hotspot on the image transparent.  A better solution would be to redesign the page so that you can accommodate a keyword rich content, and you may like this image directly instead of using a hotspot.

• Hourglass during the background process happens

  Hello

  We took a few jsp custom in R12.1.3.

  When the end user runs a process using jsp custom and if it connects to the database for further processing we want to show end users with an image instead of empty picture hour glass

  We have the written code for it but it not in R12 but works in 11i.

  Could you please let us know if anyone has a similar requirement?

  Thanks for your help

  Hello

  We have weite personalization of the OPS for this page, and we were able to get the hourglass works as expected

  Please check

  I close this issue now.

• Mixture of title/generator problem

  When you apply a transition wipe to a generator in fcp x (the generator was pressed to the bottom of full screen via "Transform - scale, Y axis"). For some reason any wipe transition effect 'hard light' only for the duration of the wipe. Once the transition is made the image looks normal again.

  I made a recording of what it looks like on the screen: https://youtu.be/rke1htjjK4Y

  Thank you!

  The problem is with the generator and which apply a wipe and the way in which the wipe works with the alpha channel of generators.

  Take the generator, remove the wipes, place it at the end of your calendar and export just the video for generator use pro res 444 so that you keep the alpha channel, make this new in FCPX and place it on your timeline, apply the wipes to this clip 'video' and you won't have the issue.

  Thanks for the youtube enabled to see the question and to reproduce.

  Tony

• EqualLogic SRM 5 automatic failover test creates instant reserve 100% on replica cloned

  Is anyway to stop the 5 MRS. creating reserve snapshot of 100% on a replica cloned during a test failover. It seems was completely ignore the default group settings.

  Thank you

  Ian

  Hi Don,

  I talked to some of the guys at Dell. Its a bug in the RSA for vSPhere 5 which will be corrected by a patch. Thanks for the suggestion though.

  Ian

• How do you turn text CSS Transition to black?

  I use CSS transition to add background color to the overview. How can I keep the black text when the cursor is not on the link?

  a: link, a: visited {background: #DDD; color: black}

  a: hover,

  a: active,

  a: focus {background: yellow; color: black}

  Nancy O.

• New feature of Transitions not working do not at all.

  The new Transitions feature does not work.

  Bomb hairstyle: #1 Salon in Sarasota, Florida for cuts hair, color, dye, hairdresser and other beauty needs.

  I still use a fixed provision the base and I apply a 0.5 second delay "Buttons of State" and it does nothing in internet explore.

  This feature is not compatible with IE11?

  This only works for the buttons of the State?

  I know that IE the ball & chain to the internet, but it is still a popular browser.

  Although IE11 and Firefox claims to facilitate CSS Transitions, background images don't transition very well or at all. We are looking at alternative methods of transitional support for background images for these browsers.

• Generate PDFS using Managed Bean with custom HTTP headers

  Background
  Generate a report in various formats (PDF, delimited, Excel, HTML, etc.) using JDeveloper 11 g Release 2 (11.1.2.3.0) when you click on an af:commandButton. See also the version StackOverflow about this issue:
  
  http://StackOverflow.com/q/13654625/59087
  
  Problem
  The HTTP headers are sent twice: once by the framework and once by a bean.
  
  Source code
  The source code includes:
  
  -Action button
  -Managed Bean
  -Task flow
  
  Action button
  The action of the button:
  
  < af:commandButton text = 'Report' id = 'submitReport' action = "Execute" / >
  
  Managed bean
  The managed Bean is relatively complex. The code "responseComplete" get called, however, it does not seem to be called early enough to avoid the framework application writes the HTTP headers.
  
  Substitution of HTTP response header
  
  /**
  * Defines the HTTP headers must indicate to the browser that the
  * the report must be downloaded (not displayed in the current
  * window).
  */
  protected void setDownloadHeaders() {}
  HttpServletResponse response = getServletResponse();
  response.setHeader ("Content-Description", getContentDescription());
  response.setHeader ("Content-Disposition", 'attachment filename ='
  (+ getFilename());
  response.setHeader ("Content-Type", getContentType());
  response.setHeader ("Content-Transfer-Encoding',
  getContentTransferEncoding());
  }
  
  Question answer full
  The bean indirectly says infrastructure that the answer is managed (by the bean):
  
  getFacesContext () .responseComplete ();
  
  Bean, run and configure
  
  public void run() {}
  try {}
  Report = getReport();
  Configures (Report.GetParameters ());
  Report.Run ();
  } catch (Exception e) {}
  e.printStackTrace ();
  }
  }
  
  private void configuration (parameters p) {}
  p.put (ReportImpl.SYSTEM_REPORT_PROTOCOL, "http");
  p.put (ReportImpl.SYSTEM_REPORT_HOST, "localhost");
  p.put (ReportImpl.SYSTEM_REPORT_PORT, "7002");
  p.put (ReportImpl.SYSTEM_REPORT_PATH, "/ reports/rwservlet" "");
  p.put (Parameters.PARAM_REPORT_FORMAT, 'pdf');
  
  p.put ("report_cmdkey", getReportName());
  p.put ("report_ORACLE_1", getReportDestinationType());
  p.put ("report_ORACLE_2", getReportDestinationFormat());
  }
  
  Workflow
  The workflow calls Execute, which refers to the 'run()' of the bean method:
  
  entry-> Home-> run-> ReportBeanRun
  
  Where:
  
  <-l' call the method id = "ReportBeanRun" >
  < description > running a report < / description >
  Report to run < display name > < / display-name >
  < method > #{reportBean.run} < / method >
  < result >
  success of < fixed-result > < / fixed-results >
  < / results >
  < / method >
  
  The bean is assigned to the scope of the "demand", with a few managed properties:
  
  < rule of flow control = "__3" id >
  hand < of-activity-id > < /-activity-id >
  < control-flow-case id = "ExecuteReport" >
  run < from outcome > < / de-results >
  ReportBeanRun < to-activity-id > < / to-activity-id >
  < / control-flow-case >
  < / control-flow-rule >
  
  < managed-bean id = "ReportBean" >
  < description > running a report < / description >
  < display name > ReportBean < / display-name >
  application of < managed-bean-scope > < / managed-bean-scope >
  ...
  < / managed-bean >
  
  The "success < fixed-result > < / fixed-result > ' strikes me as wrong - I don't want to not the method call to return to another task."
  
  Restrictions
  The report server receives requests from the web server only. The URL of the report server cannot use browsers to download directly, for security reasons.
  
  Error messages
  The error message is generated:
  

  Duplicate received headers from the server
  

  
  349 (net::ERR_RESPONSE_HEADERS_MULTIPLE_CONTENT_DISPOSITION) error: multiple headers received separate Content-Disposition. It is not allowed to protect themselves against HTTP response splitting attacks. Nevertheless, the report is generated. Prevents the framework to write headers HTTP would solve this problem.
  
  Question
  How can define you HTTP headers in ADF using a workflow to generate a PDF file by calling a managed bean?
  
  Ideas
  
  Some additional ideas:
  
  -Substitute the listener of the Phase of the lifecycle of Page ("ADFPhaseListener" + "PageLifecycle")
  -Develop a customized web server Servlet
  
  Related links
  -http://www.oracle.com/technetwork/middleware/bi-publisher/adf-bip-ucm-integration-179699.pdf
  -http://www.slideshare.net/lucbors/reports-no-notes#btnNext
  -http://www.techartifact.com/blogs/2012/03/calling-oracle-report-from-adf-applications.html?goback=%2Egde_4212375_member_102062735
  -http://docs.oracle.com/cd/E29049_01/web.1112/e16182/adf_lifecycle.htm#CIABEJFB
  
  Thank you!

  The problem was that the HTTP headers have been actually written twice:

  1. the report server returns the HTTP response headers.
  2. the bean was his own (as mentioned in the question) HTTP response headers.
  3. the bean was copy all the contents of the report server response, including headers, to the output stream.

  Firefox has ignored the header in double, but not Google Chrome errors.

• Zoom in a title.

  Hi guys, just wonderd how can I Zoom in a title without the background after the transition too. Say I do a title, it has a black background by default and I want just text to zoom by using the zoom transition, how to stop the black background is also. Ive tried to put a layer of black to a parralell on another video track point, but it does not work. Any ideas?

  Thank you

  Ed

  Say I do a title, it has a default black background

  In fact, a title has NO default background. They seem to have black, according to the location of the ICT in the timeline panel. You can toggle the visibility of the background and select the visible image using the following commands in the Titler:

  

  If you indeed have a black background, you must draw a filled rectangle of black - select and delete that so that the title 'floats' on what substance put you on.

  How stop the black background is also, I just text to zoom by using the zoom transition.

  Do not use a transition during this manoeuvre; animate the scale properties, instead:

  

  Given that the title has an alpha (for example a transparent background) channel, when you animate the scale, only it moves.

• 90W AC adapter for T510

  I got my daughter a Thinkpad T510 for College and also bought the duplicator 3 so she can use it as a cradle to College. I bought separately (p/n 42T 4425) 90W Adapter for use with its port replicator. During the fall semester, she told me that the 90W Adapter stopped working, so I called service and they sent a replacement. However, they sent only the adapter, not the three-phase power cable.

  The replacement adapter does not work, but I wonder now if the problem is the power supply cord. I have a multimeter, but I don't know how to check the power supply cord. Any suggestions?

  Disconnect the power cord of the adpter & wall take the pos counter. & neg. each end of the rope on all (1 at a time) 3-pin to see if it can read from one end to the other if you have another cord are trying with the adpter & WELCOME to the forum

• Child table of graphic Parent inheriting from filters

  Hi all

  I created a graph that represents the timeline to move transactions for the entire year. I also created graphics for each month and then activated the navigation from the parent graph for posting a link to each month chart. When you click on a month, it redirects to this table of the month.

  The graph for that specific month is displayed, but all the graphics in navigation appear with the same data, because they inhereited the same filters as the parent chart. Filters months do not observe their originally designed filters.

  Is there a way I can isolate the filters of each chart specific month to every month instead of in line with the filters of the motherboard?

  
  

  
  

  (See the screenshots below for a better explanation)
  

  

  Displays the parent chart spend information all year with months shown on the axis X. When clicked, navigation redirects the graphical dashboard for a specific month.

  
  

  
  

  

  The titles for each month and the format for graphics are correct. The only problem is that the original for this months table filter was not implemented.

  Instead of show dates for the month, the dates are given for the entire year.

  

  Instead, I need my card appear as I have designed in the Oracle answers (as in the screenshot above). The dates are listed on the x-axis of the chart, and it is limited to a specified period of time.

  I have a limitation of the function of navigation on the cards?

  I found the answer to my own question... in the responses, on the 'criteria' tab the filter must be protected:

  To protect a filter to change during navigation and generate

  • In the filter area in the criteria in Oracle BI answers tab, click the menu button for the filter that you want to protect, and then select the option Protect filter. A check mark appears next to the option when it is selected.

• Slideshow-wash

  I would put a wash in the background of a slide show and want to match a color in one of the photos. Is it possible to do it with the color picker? When I move the eyedropper out of the shade of color in a picture box, it changes to a normal cursor.

  Thank you

  Jim Hodder

  Hi Jim Hodder.

  You can select any color on the color of window by dragging the pipette by the window and if you know the HEX color value, you can type it on the bottom left of the box and the search for the particular color.

  

  How to set the wash:

  • In the Panel of the slideshow module background, select color Wash.

  • Click on the color on the right box and select a color from the color pop-up window.

  • Specify the appearance of the color:

    OpacitySets opacity or transparency of the color wash overlay.

    The AngleSets the direction of transition degraded the background color or the background image to the color wash. Turn the dial to Angle, drag the slider or enter a value in degrees.

    Please let us know if it helps.

    ~ Sarika

• How do I re-Lr window size?

  I'm new to Lightroom - transition during opening. I am running Yosemite on an older iMac 24 "(début 2008)."

  How do I re-Lr window size? At the present time, it appears to be locked to the original format. Note that this is NOT full screen, which I can always enable/disable using < F >.

  SHIFT + F will switch between the different screen modes.