REPLICAT ERROR(The procedure entry point long jmp could not be located)

Similar Questions

• The procedure entry point ucrtbase.terminate could not be found in the api-ms-win-crt-runtime-l1-1-0.dll dynamic link library

  Running Windows 7 Home premium

  Hi I get this error when I try to add or remove windows features. Before I even tried to change anything, I get this error when I try to access point to add or remove windows features. I just reinstall windows then perhaps it's to do with it?

  ERROR

  The procedure entry point ucrtbase.terminate could not be found in the api-ms-win-crt-runtime-l1-1-0.dll dynamic link library

  If anyone knows what this means or what I have to do to get rid of the error, any help would be accepted with gratitude.

  Best regards Steve

  Hi, I have now discovered what the problem was. It wasn't Office exactly. Rather have just reinstalled windows 7, windows update did not work properly. Virtually no updates had been installed. I had to run the "windows update diagnostic" program from Microsoft support. Once that had solved the problem of update on 180 updates have been installed. Once they have been installed the problem with the error has been resolved. I do not know what update fixed but one of them did.

  Best regards Steve

• What the devil? Error: The procedure entry point? detac3@ListData@@QAEPAUData@1@XZ couldnot be found in QtCore4.dll dynamic link library.

  I hope I'm in the good topic section. My computer feezes. I restart or turn off & that is what happens.                                                                                       Error: The procedure entry point?  detac3@listData@@QAEPAUData@1@XZ not found in the QtCore4.dll dynamic link library.                                      He also does this whenever I turn on my computer, even if it does not freeze. I was told that I have to use my CD to get into windows XP, but I have no idea where I put it. What now? Oh, I'm computer illiterate, so stupid it upwards!

  Hi Budge3263,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  QtCore4.dll is part of the development environment for a number of applications, including Photoshop Elements.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Error "the procedure entry point SMapLS_IP_EBP_12 be found in KERNEL32.dll dynamic link library" when you try to play Red Alert: Command & Conquer

  Original title: the procedure entry point SMapLS_IP_EBP_12 could not be found in KERNEL32.dll dynamic link library.

  Ive been trying to install Red Alert: Command and Conquer on my new pc windows 7 and of course he will not play to come with all can't play because its running windows 6.1 and it's a single program of windows 95. then I went through all troubleshooting and change everything to make sure that it works and it actually installed, but when I went to play this message appears and im like why does this happen to me!

  The procedure entry point SMapLS_IP_EBP_12 be found in KERNEL32.dll dynamic link library.

  It of the message, can someone help me?

  Hi BigAl3000,

  Please note that Command & Conquer: Red Alert 3 is the only version compatible with Windows 7.

  Red Alert 2 and red alert are not compatible with Windows 7.

  See Windows 7 compatibility for Command & Conquer: Red Alert for more information.

  To troubleshoot program compatibility issues in Windows 7, try the following methods:

   

  Method 1: Open the program compatibility problems

   

  Most programs written for Windows Vista are also running Windows 7, but some older programs might run poorly or not at all. If an older program does not work, use the program compatibility issues to simulate the behavior of earlier versions of Windows.

  Method 2: Contact the program vendor or the hardware manufacturer

   

  Contact the program vendor for advice on how to solve the problem. In general, the software vendor's Web site provides a support section that you can use, for example, to search for an error message that you receive from the program.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• System error "the procedure entry point _SetAsyncTraceParams at (@)" 16 is not found in the library of dynamic links ATRACE. "." DLL.

  Original title: no access to system restore

  After a massive search, I can't solve this problem! Please indicate why this is happening and how to solve it.  Thank you for your support.

  This is the error message pop up that I got trying to activiate (Rstrui.exe) system restore "the procedure entry point _SetAsyncTraceParams at (@) 16 be found in ATRACE dynamic link library. DLL. notice the @ in support should replace 'at' since the seizure of this character created a link to MFL and was confusing to read!

  Hi intelegend,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that scan you SFC on the computer that would be a corrupt system file search.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the steps above do not then refer to the article below and check if it helps.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

  Original title:

  I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

  Hello

  1. are you able to connect next to this error?

  2. are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a SFC system analysis and control for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Follow these steps.

  a. open windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Apple Application Support

  b. copy the file "libxml2.dll.

  c. open new windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Mobile Device Support

  d. Paste the file 'libxml2.dll' at the location.

  e. restart your computer.

  I hope this helps.

• Cricket Ashes 2009 did not stand. Error, "the procedure entry Point? getOpenState@Sound@FMOD@@QAG? »

  I was cricket ashes installed 2009 but I haven't run this error comes to me

  "The procedure entry Point? getOpenState@Sound@FMOD@@QAG? AW4FMOD_RESULT@@PAW4FMOD_OPENSTATE@@PAIPA_N@Z could not be found in the dynamic link library fmodex.dll. »

  This game does not not on my PC please help me solved my problem soon my operating system is bit window 7 Ultimate 32 so answer me quickly...

  Virginia,

  Please contact the Microsoft Community.

  Try to reinstall the application in compatibility mode and check if it helps. See the following article:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, then I would you contact the game manufacturer for further assistance.

• Error 'the procedure entry point not found RtlCopyContext in the dynamic link library ntdll.dll' while clicking on

  Original title: I got this error by clicking

  Hello, I got this error by clicking on any .exe file (Anti Virus, players, etc.). "The procedure entry point rtlcopycontext could not be located in the dynamic link library ntdll.dll" Please help me because I can't start any program...

  Here is the screenshot of this error!

  http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  Thank you very much. Problem has been resolved

• Start Windows 7 error"the procedure entry point not found objc_exception_try_enter in the dynamic link library objc.dll"

  The procedure entry point objc_exception_try_enter could not be located in the dynamic link library objc.dll

  How can I avoid that this message that appears on my desktop when I connect to my desktop computer?

  I deleted iCloud and other programs, but it still appears.

  You can try the clean boot procedure to try to ascertain what autorun program is triggering this msg

  http://support.Microsoft.com/kb/929135

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.

• Skype error: "Skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport...". »

  Sorry for the ridiculously long title, but that is exactly the error I get.  When I contacted my friends @ Skype that they just told me it's associated windows problem.  I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I'm absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure...

  Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.

  Please note that the thread referenced in 'Question (1)' has been marked as the answer by a moderator, and not by the person who asked the question.  It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you're welcome to try these things.

  Uninstall and reinstall of Skype as suggested in "Question 2" would have been my first guess, but a bit of searching online suggests that it also assisted.  Again, try if you wish.  When you uninstall Skype, you will not lose your contacts.

  Research online, I've mentioned suggests that the problem is caused by software Kies from Samsung.  You have this installed on your system?  If so (or even if not), go to C:\Windows\system32 and rename avrt.dll.  You can call it avrt.dlX or something else you like.  Reset.  Let us know if that fixes the problem.  If it didn't, or he did something another break, you can always change the original name (this is why rename is safer than deletion).

  Reference: http://forum.renoise.com/index.php?/topic/31412-solved-ntdlldll-ntalpcsendwaitreceiveport-error-on-startup/

• Cannot start application error: getlogicalprocessor procedure entry point information is not found? ... could not be located in the library links file kernel32.dll Dynamics

  Original title: I had the problem that revger.exe and kernal32.dll

  When I run any application on my system, I get an error kernel32 below is an example:

  The procedure entry point processor information get logicasl is not found in KERNEL32.dll dynamic link library.

  Hi Rajeshlenka,

  You did changes to the computer before the show?

  Try to start the computer in safe mode. If the issue is not persists check safe mode if the problem persists in the boot.

  Step 1: Safe Mode

  See the following site:

  A description of the options to start in Windows XP Mode

  http://support.microsoft.com/kb/315222.

  Step 2: Clean boot

  See the following site:

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

   

• Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Dirext-x-file-d3d9dll-is-missing-Baz/2c639497-CFBA-4C6D-9155-f946f8dc1a45

  It will be useful.

• Error message: the procedure entry point sqlite3_wal_checkpoint could not be found in the librayr of Hotlinks SQLite3.dll.

  Original title: IApple synchronize notifier.exe - not found entry point

  I typed a mistake in my first question.  Here he again the question.

  The procedure entry point sqlite3_wal_checkpoint be found in the librayr of Hotlinks SQLite3.dll.

  I called Apple, but they checked my computer and cannot find any problems with the above, but he always comes back.

  Hello

  1. when exactly you receive this error message?

  2. did you of recent changes on the system?

  Method 1:

  Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2:

  You can try to uninstall and reinstall everything produced Apple installed on the system and check if this may help:

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

• Cannot save PDF to word file? -The procedure entry point? GetText Direction@CSolidContainer... error

  Hello!  I hope someone can help me with this.  I am trying to save a PDF file as a word document.  I get this error.

  The procedure entry point? GetTextDirection@CSolidContainer@@QBE? AW4SolidTextDirection@@XZ could not be found in the C:\Program Files (x 86 (\Adobe\Acrobat 10.0\Acrobat\plug-ins\SafeAsNonPDF\Solid\DOCXFlt.flt dynamic link library.

  Tried different files - still no luck.  Also when I create a PDF from a word document it converts but the program hangs and I have to restart.  I use Acrobat X Pro on a windows 8.1 platform.

  Thank you!

  Jan

  Hi Jan,

  I'm sorry for the inconvenience caused, lets try to get this matter resolved.

  Have you tried to repair the installation (help (Adobe Acrobat)-> repair install)?

  

  Kind regards

  Nicos