Replication for a VM 'inactive', while others is all 'OK '.

Similar Questions

• I downloaded and installed creative cloud with no problems. From the window of creative cloud cannot display the APPS page (while other 'Home', 'Community' can be seen). This is why I can't select the application to be updated. Thanks for your help

  I have download and install creative cloud with no problems. In the window of creative cloud cannot display the APPS page (while other 'Home', 'Community' can be seen. This is why I can't select the application to be updated. Thanks for your help

  Please refer to the threads below where the issue has been addressed:

  Re: desktop is not displayed Panel apps? PC

  Missing Creative Cloud Desktop applications tab

• Replication suddenly failing: status "inactive", "invalid state" error

  I've been replication between sites for a while.  Today, all but 1 on the States of VM replication has changed to 'Inactive'... then, of course, to the "not active (Violation of RPO).  When I try to force synchronization to occur now, web client gives me an error that synchronization is already in progress.  in vCenter, he reports that "VM is in an invalid state.

  I can't find anything about it anywhere.  have you seen this before?  I don't know what next steps I can take here;

  Hello

  In order to study we support beams. Could you file an SR and fix the support beams? Most likely, it is a connectivity problem between the host and the site of the replica.

  Thank you

  Lachezar

• For loop within a while loop

  I have for loop within a while loop... admission to the for loop N comes from the VI selection... the while loop I a condition essentially statement it stops just after to finish all the iteration in loop...

  Entrance to the N loop is bascially driven by a local variable... that's the problem Iam having:

  When I press the Start button to run the program... regardless of the output of the select VI is gives the N of the for loop, then the loop starts and then ends in place... and when the output of the select statement takes a different value (the N of the loop for) loop not work until I restart the program again... What can I do so that the for loop runs again for another value of N, the RUN program button is enabled.

  1. clean your diagram.  Style guides suggest keep the pattern of a single screen.  With a little effort, I was able to get your DB less than 1600 x 1000 pixels.

  2 then I can see (some) it happens all at once. This thing does nothing?

  3. local variables can lead to race conditions.  Output in Angle position may be a race condition, although is probably not what you wanted to do.  What does the wired local time at the moment present terminal meter? (Ooops! Two controls with the same name - which can be quite confusing as well!)  If you need or want two components of façade having the same text, use the legends.  Make the labels is different so the comic is more readable.

  4. having more than one Dequeue function on the same queue will lead to unpredictable results.  When an item is removed, it is removed from the queue and is not accessible to any other Dequeue function.  In parallel loops, you have no way of guessing which Dequeue will seize any particular element.

  5 use Boolean reverse instead of Select with wired False to true and true cable at the entrance to false entry. Better, just make the case of forgery in the structure of the case within the for loop the real deal. No required reversal.

  6. I was not looking for to determine the logic of the code within the structure of this case. It seems I could have posted a much simpler way to do this several weeks ago.

  7. use multiply from the Digital Palette rather than a node form multiply by 4 or 1.8. Uses less space BD and is much easier to read.

  8. as has been suggested, learn how to work the machine architecture and the State of producer/consumer.  They can make your life much easier.  Do not try to convert immediately to these models.   It's too much bite to at some point.  Learn how they work first.  Make a few simple examples.  Then rewrite this program in this format.  Probably faster than fixing what you have now.

  Lynn

• The sound allows you to check the default speakers. However, some applications use some speakers while other applications use different players.

  I produce several channels on mogulus. (see http://theallyvideo.blogspot.com/)

  I use a HP desktop computer smart touch and a few laptops from Sony to run the application studio to mogulus.com.

  Use the mogulus studio, I can watch multiple video streams live as sources and monitor outgoing video as well. There's my video stream live from other computers/producers in 4 different States more video feeds of my two laptops. NOTE: see www.mogulus.com

  I am running Vista on all three machines. (I found that XP cannot handle 4 video stream, I got up to 9 with Vista.

  Audio wise, it has worked on all three computers.

  Mogulus studio, use Adobe to handle all audio and video.
  I can turn on or off the sound of my guests so I can hear them and coordinate that I then put on the air and see how long they need.

  The outgoing video monitor also has an audio mute button. When using the PC's built-in speakers, it's a MUST to mute the audio monitor outgoing when you go live, and then reactivate the sound when he in transmitting the other guests, or playing pre-recorded clips.

  I also have a Microsoft keyboard with maximum volume down and cut the buttons on my desk. Two Sony laptops have the same keys and worked perfectly, controlling the built-in speakers. The keys make it easier to mute the speakers to use the key mute in the studio during the 'live '.

  I had another option for speakers of inhibition to avoid the Larsen effect. It is to plug headphones into the headphone jack on the monitor.
  I could connect the headset, do some direct ads, spots a show pre recorded, disconnect the headset and wander in the 'studio' listening to the show through PC speakers.

  So far has worked flawlessly, with two small problems.

  • (1) I sometimes forgot to mute the speakers when I spotted my local webcam and microphone. This would cause comments as soon as I saw the video and it came out alive. The microphone pick up the sound from the computer speakers.
  • (2) the microphone integrated into the HP desktop computer doesn't have a good sound. The mic's Sony are OK, but too far from my mouth to provide good storytelling.

  I decided that the Microsoft LX3000 USB integrated boom Mic headset would be the perfect complement to solve these two problems. I bought three of them, so I would have them on computers cell phones too.

  I installed the LX-3000 CD according to the instructions. Then I plugged in the USB cable to connect the headset/microphone.

  The sound of the headphones was superb. The boom Mic on the headset is a huge improvement over those built in monitors or webcams.

  Mute the Mic and speaker volume up/down on the cord of the LX-3000 is a convenience too.

  Use the headset no sound PC speakers. So, the echo is therefore more a problem.

  Use of the helmet, it is not necessary to mute the speakers. They are now closed all the time now. So, I go live, make an announcement, then play a prerecorded segment.

  That's where everything went south.

  I take off the headphones so I can take a coffee. I realize that now, I have no way of controlling the segment recorded through the speakers. I have no way of knowing when the segment is about to finish and I need to rush to the computer to make the next segment or live announcement. Being attached to the PC by a foot 3 cord isn't good at all.

  I try to do what I did with the analog headphone. Unplug the headphones to re - turn the speakers.
  No luck there. The speakers are still silent.

  I plug the USB headphones in. NOW I have no sound through speakers or headphones. The microphone in the headphones works well. like the mute of the microphone on the cord of the headset. Reduction in the volume of the buttons on the headset cable move the sliders up and down in the windows sound mixer, but no sound anywhere.

  I re - start.
  Now I get sound from the earpiece. But, not the speakers. All the volume keys on the keyboard, monitor and headset cable + / up and down the volume sliders but have no effect on the speakers or headphones. The helmet is at full volume all the time and PC speakers are silent.

  I look in the Control Panel, "speakers". I see that the 'helmet' has a green check mark and don't "speak". I select speakers and press the button "default". The speakers now have a green check mark.
  No change...
  I reboot...
  Now, the speakers work, but the headphones does not work. Volume controls move the sliders, but do not effect the speaker volume. None of the buttons mute function.

  This is totally unacceptable. The only way to switch between speakers and headphones is through the re-booting the PC and Control Panel. Cannot do when playing a mixture of 15 the second live commercials ads and 30 seconds.

  This is where it gets weird.
  
  While in Internet Explore on the page of mogulus studio, or Flash media encoder, the outgoing audio monitor goes to the HEADSET. If I start another copy of Microsoft Internet explore and reveal my mogulus channel drive, the sound of it goes to the PC SPEAKERS.

  Looking at the volume mixer, I see that if I select the "peripheral" "as speakers SoundMax integrated Digital HD Audio", there is only one application, the 'Sound' volume control and control the sound of the IE. players page.
  If I select "Device", "Microsoft LifeChat LX-3000" I get two Windows sounds and Mogulus Studio applications"

  I get the same results on two laptops from sony.

  NOW FOR THE QUESTIONS.
  OK, so how can I tell Blender what applications go to what audio output?

  Can I set up so that as the studio flash applications will both headphones AND PC speakers.

  Can I make the speaker MUTE button on the keyboard and screen work as they did and set mute the speakers for PC only. That would leave the headphone speakers all the time.

  Except that how can I at least get the +/-and mute keys to work as they did.

  Thank you
  Bob

  Bob, you can proceed as follows which allows different devices to be chosen for different applications in Windows:

  Close all programs, are preparing to open the first program which will use headphones...
  -Right click on the Volume icon and select playback devices
  -Select the headset as default device and open the program that you want to use this device, it will play on the current default device (helmet)
  -Now right click on the Volume icon and select playback devices, set speaker to the default device
  -Open the program you wish to play on the speakers

  The original program will continue to play on the headphones and the second program will continue to play on the speakers.

  Because of the helmet to helmet USB when you unplug them this device is disconnected (uninstalled) completely, she's not as expected with analog headset.

  Where you disconnected the analog headphone the BIOS of the machine would automatically re - routing the sound to the speakers, I do not think, however, that a secondary feature differentiating the speakers in the headphones would be available in the playback devices in this instance.  This is due to the sound card as the primary and the only device in this case and the speakers/headphones being secondary speakers or all outputs simply.

  You will be able to mute/unmute/volume adjustment for all devices in the Volume mixer (the switch A B device with the menu of the device), but I'm not aware of a way to run a stream audio reading by another device using the commands of its standard Windows at this time.

• Why some youtube videos appears a white screen with sound only, while other just work very well, these videos streaming without any problem

  Why some youtube videos show a white screen with sound only, while other works very well, these streaming videos without any problem on youtube no black screen, nothing, but sometimes once downloaded, they appear black screen with sound only? Yes sometimes when you re-download it works very well, but why?

  Hello

  (1) did you make any changes before the show?

  (2) you use internet explore? If so, which version?

  (3) is the specific question of youtube videos?

  (4) the same thing happens with the different browsers?

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  For reference:

  Why a few blank pages or incorrectly displayed in Internet Explorer?

  http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer

  I hope this helps.

• ORA-01013 EXCEPTION WHILE OTHERS - behavior Undokumented?

  Hello!

  I tried to look around to find documentation on this subject, but I couldn't, so I ask here:

  As far I can understand the EXCEPTION of Oracle Documentation while OTHERS must catch not taken Exceptions supported everything!

  But then I stumbled on ORA-01013 is cancelled by the user. And who slips up WHILE OTHERS just

  DECLARE
  e_cancelled EXCEPTION;
  PRAGMA EXCEPTION_INIT(e_cancelled, -1013);
BEGIN
  BEGIN
    RAISE e_cancelled;
  EXCEPTION
    WHEN OTHERS THEN

        -- All Exceptions should be logged here, but starting with Patch 11.2.0.4.0

         -- WHEN OTHERS is NO LONGER TRIGGERED :-o what to do???
      DBMS_OUTPUT.PUT_LINE('EXCEPTION OTHERS');
  END;

EXCEPTION
  WHEN e_cancelled THEN

      -- The Exception has to be handled individually
    DBMS_OUTPUT.PUT_LINE('EXCEPTION CANCELLED');
END;
/

  My research led me to the Oracle Changelogs, that show with the last update "ORA-01013 is not caught by OTHERS more»

  So this seems to be be desired (although undocumented?) behavior... https://support.Oracle.com/epmos/faces/DocumentDisplay?ID=12838063.8

  My Question:

  We use detailed error logging and tracing in our data base, capture of logging and reraising errors THEN having "than OTHERS"
  is there a setting or parameter to let the Manager WHEN OTHERS catch this exception, or do I have to change hundreds
  packages to insert an extra WHEN ORA-01013 in each method?

  Outside the logging of errors, what is with the closing of cursors, freeing resources? Because there is no block finally in

  PL/SQL, I usually use BEGIN, EXCEPTION, END as a try-catch block and cleaning after the exception block, but when

  a timeout occurs, will be simply ignored all this code cleaning?

  Post edited by: FalcoW Link to Oracle Changelog for a better understanding when the change occurred.

  Ok... Oracle confirmed Support:

  1. This is the desired behavior, that WHEN OTHERS catches all exceptions (i.e. ORA-01013, ORA-31013, ORA-...)

  2. you are not supposed to catch - if the user cancels (or a session Times Out or JDBC accident) you should not connect anything, or do any cleaning... because the immediate release requested customer, you must immediately leave - even if it breaks your data.

  3. There is no work around known, except intercepting explicitly any special exceptions (which are not completely documented and may change at any time in the future)

  then... unlucky :-/

• Why some videos play well on Facebook while others have only audio with a green screen?

  Why some videos play well on Facebook while others have only audio with a green screen?

  Hello

  Green screens are almost always a sign of a video driver issue.  Could you please send the contents of your "Display devices" section after generating a DXDiag report?

  What is a Dxdiag and how to report a?

  I suspect you may have an outdated video driver.  This FAQ can help you learn the steps required to update:

  Windows: How do I update the device driver for my graphics/video card?

  Finally, if the driver update doesn't help, try turning off hardware acceleration using the steps described here:

  How to disable or enable hardware acceleration?

  Thank you
  Chris

• WHILE OTHERS

  Hey all,.

  My first question on this new forum designed. I am very confused if we should use WHILE OTHERS or not. Tom kyte in one of his article wrote that 90% of the bugs won't come if we stopped using

  triggers, autonomous transaction and others. I found the use of SO that others in the oracle documentation.

  So I want to ask when the use when others is justified.

  -- including OR REPLACE is more convenient when updating a subprogram
  CREATE OR REPLACE PROCEDURE award_bonus (emp_id NUMBER, bonus NUMBER) AS
    commission REAL;
    comm_missing EXCEPTION;
  BEGIN -- executable part starts here
    SELECT commission_pct / 100 INTO commission FROM employees
    WHERE employee_id = emp_id;
    IF commission IS NULL THEN
    RAISE comm_missing;
    ELSE
    UPDATE employees SET salary = salary + bonus*commission 
    WHERE employee_id = emp_id;
    END IF;
  EXCEPTION -- exception-handling part starts here
    WHEN comm_missing THEN
    DBMS_OUTPUT.PUT_LINE('This employee does not receive a commission.');
    commission := 0;
    WHEN OTHERS THEN
    NULL; -- for other exceptions do nothing
  END award_bonus;
  /
  CALL award_bonus(150, 400);
  

  Is the use of WHILE OTHERS justified?

  You do not send an exception message - so the code's breach of the contract,

  DBMS_OUTPUT is not an interface to write in the terminal of the appellant. This is a PL/SQL package. It has a table variable. When you call DBMS_OUTPUT.put_line (), you write a line of text in the table. Nothing more. You do not provide information or data to the caller,.

  The appellant may, after a server call, call another server to read the DBMS_OUTPUT table, turn it off and display the data in the table on the display of the customer.

  Do not confuse the 2nd call that displays the text "Mute" the DBMS_OUTPUT table, as catch the exception raised by the 1st call.

  An example:

  SQL> --// we tell SQL*Plus not to automatically display DBMS_OUTPUT array data
  SQL> set serveroutput off
  SQL>
  SQL> --// we create a test procedure that violates the code contract by
  SQL> --// supressing exceptions and writing the exception to some other
  SQL> --// variable like DBMS_OUTPUT
  SQL> create or replace procedure RaiseNoData is
    2  begin
    3          raise NO_DATA_FOUND;
    4  exception when OTHERS then
    5          dbms_output.put_line( SQLERRM(SQLCODE) );
    6  end;
    7  /
  -
  Procedure created.
  -
  SQL>
  SQL> --// we execute the procedure - we do not see any exception, so
  SQL> --// we assume the code was successful, when in fact it failed
  SQL> begin
    2          RaiseNoData;
    3  end;
    4  /
  -
  PL/SQL procedure successfully completed.
  -
  SQL>
  SQL> --// what you see via SQL*Plus with serveroutput enabled is the
  SQL> --// following
  SQL> begin
    2          dbms_output.enable;
    3          RaiseNoData;
    4  end;
    5  /
  -
  PL/SQL procedure successfully completed.
  -
  SQL>
  SQL> --// no exception seen - we assume the execution was successful
  SQL>
  SQL>
  SQL> --// SQL*Plus now reads the DBMS_OUTPUT buffer - to simplify the
  SQL> --// example, we only read the 1st line from the buffer
  SQL> var line varchar2(100)
  SQL> var status number
  SQL> begin
    2          dbms_output.get_line( :line, :status );
    3  end;
    4  /
  -
  PL/SQL procedure successfully completed.
  -
  SQL>
  SQL> --// and then we display (like SQL*Plus would), the line read
  SQL> --// from the DBMS_OUTPUT array
  SQL> print line
  -
  LINE
  ----------------------------------------------------------------------------------------------------
  ORA-01403: no data found
  -
  SQL>
  

  As you can see, we have not received any indication that the RaiseNoData procedure failed with an exception. When we read the DBMS_OUTPUT buffer we saw a text message - which contains an error message. Who put it there? We are not sure. You may have another procedure and not RaiseNoData. Maybe it was written not because an error has occurred, but a message of debugging for some or other use. We cannot use DBMS_OUTPUT data to base our decision on the question of whether our call to RaiseNoData was successful.

  Said agreement for RaiseNoData to return an exception if an error occurs - enabling our code intercept this exception and decide how this error affects our code.

• My iPad detects inactivity while I'm listening to a story.  Then he slips into the mode "sleep" and interrupts the story.  Any suggestions on how to avoid this?

  My iPad detects inactivity while I'm listening to a story.  Then he slips into the mode "sleep" and interrupts the story.  Any suggestions on how to avoid this?

  Setting to never by using the auto-lock settings application.

  Settings > general > auto lock > never

• The check box for "see windows contents while dragging", shoots himself

  The check box for "see windows contents while dragging", shoots himself.    Irritating!   Any ideas?

  Hi Mr_Sleeze,

  See if you can set a registry key verification:
  How to use Group Policy to configure auditing of Windows registry keys
  (The above article was written for Windows XP Home edition, but should work as well under Vista).

  DragFullWindows is the value you want to monitor.
  http://TechNet.Microsoft.com/en-us/library/cc787526.aspx Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• My Windows 7 Enterprize evaluation copy has expired and I need to get a new license for this computer and two others

  My company Windows 7 evaluation copy has expired and I need to get a new license for this computer and two others?

  Evaluation copies are for your temporary assessment, so you can decide if you like the system.  If you want to continue using it, you buy it.

• I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  You can do it, but you don't have to install cs3 in order to install your upgrade of cs5.5.

  You can launch the installation of cs5.5 and you will be asked your cs5.5 serial number.  Setup will ask you then select the product (in a drop-down list) calling.  Select cs3 and you will be prompted for the serial number for cs3.

  Enter the correct number at the right time and to proceed with the installation.

  If you no longer need these programs on your old laptop, disable (help > deactivate) before uninstalling so that you can keep your two activations.

• SRM 5.5 - vSphere replication - error: impossible to reverse the replication for the Virtual Machine. A snapshot operation cannot be performed

  Hi all, we have just run a test DR failover of a couple of virtual machines in our protected our failover site and all site swung perfectly, two virtual machines came online and all applications work well. However when we cam to r-eprotect machines virtual, we get some errors.

  One of the virtual machines seems to have lived the reprotect end process, it is still running, but has not moved to 89% for some time. The virtual machine has a couple of grand (a little less than 2 TB) VMDK. slow progress is just a consequence of the large VMDK?

  More worrisome is the virtual machine which don't reprotect at all. It generates an error whenever I click on the "Restore" button (error: impossible to reverse the replication for the Virtual Machine.) A snapshot operation can not be performed).

  
  Does anyone have any ideas as to the cause?

  Thanks in advance for any help.

  Andy

  Finally got to the bottom of this. The issue was that reprotect SRM work was trying to dispel any snapshots that were taken on the computer object virtual destination in VMWare, but could not clean snapshots.

  The reason why snapshots would not consolidate was because it was snapshots of temporary VEEAM who in fact any snapshot file listed in the VSAN data store. So when we looked through the browser data store, no snapshot file existed in the virtual computers folder. Trying a manual removal also failed.

  To fix this, we created a snapshot of the virtual machine in the original data center (note is the engine to the bottom of the virtual machine), this effect was to get rid of the 'fade' snapshot that was visible in the Snapshot Manager that VEEAM backup had left behind. Once this had disappeared, the reprotect back to DCA worked perfectly.

• How can I add a donation page with different levels to give for example $ 250, $150, $50, other

  How can I add a donation page with different levels to give for example $ 250, $150, $50, other.  I'm with Foxy cart... is it possible?

  Since the end of the Muse, you can add texts as the value of the donation with paypal button that would take users to the paypal for the payment site, with Foxy cart you can try the suggestion mentioned here:

  https://Forum.FoxyCart.com/discussion/4417/donation-page-radio-button/P1

  Thank you

  Sanjit