Interfacing of the host target

Similar Questions

• Run code on the host target RT and FPGA

  Hi all

  I'm sorry if I ask a question to repeat. I searched for this a bit and couldn't find a solution.

  I'm trying to run a single VI (be it on RT compactRIO or on the connected host PC) and enforce the code on the host PC and target the FPGA code RT. I currently code that runs on the host PC computer that opens the FPGA reference and executes code FPGA, but I don't know how to do this with a VI on the target of RT. Any advice/help would be great. Thank you!

  Brandon

  You are not far from your goal. But you need to at least

  1. Update FPGA code (Bitfile) containing your code to run on the FPGA.
  2. An executable compiled for your goal of RT, which is set to autostart.
     You can use the code from my first post as a starting point. Compile, deploy and set it to autostart on your target of RT.
  3. An executable compiled for the host machine. that your user will begin.
     You can use the code in my first post, maybe load IP address, Port etc. of the Ini file settings.

  If you double-click on the exe file on your host computer it will open an application reference to your target computer of RT and call the VI on the target machine. This is how you run code on your RT. From this RT code you can download and run the FPGA (bitfile) to your FPGA code or control which is already running the FPGA by controlling a state machine code. Load more screws to your memory of RT targets and call them from your host to add more functionality if you need to.

• How to change the domain name on the host target

  Hello!

  I need to spend a couple of machines in a new area.

  Is it possible to change the field to a GC host or what I need to remove and add?

  / R

  Unfortunately, there is no good way to change the host name.   You can change the display name with EMCLI change the target, but below would be inaccurate, because it would still be the old domain.   Can you create a DNS alias so that it can still be used with the old domain?   Otherwise, delete and rediscover is the only way that I can see.

  You can use this to remove and readd without reinstallation:

  http://docs.Oracle.com/CD/E24628_01/install.121/e24089/appdx_repoint_agent.htm#BABICJCE

  followed by

  emctl start agent

  emctl security officer

  emctl config agent addinternaltargets

• It is possible to create an interface between the host and the VM

  It is possible to create a virtual switch between esxi host and a virtual machine.  I know that technically I can get to the esxi host for the virtual machine in the virtual machine network and back into the host esxi during the port of the kernel.  But we wonder if it is possible to have a private network setup so that the VM guest can talk directly to the shell host secure without leaving the network?

  Yes you can - create a virtual with a vmkernel port and a port of the VM of the group as long as they are on the same segment that traffic will not leave the ESX host

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• cRIO-9114 don't reset the host.vi programming interface

  Hi, I use Labview 2009 with a target FPGA 9114 cRio controlled from a host PC.

  Host opens the target FPGA (open FPGA vi reference) and then executes a loop to write output voltages via the FPGA - target.vi in an analout 9264 module. Works very well.

  When the loop in the host.vi is stopped, I tried that reset just as method of FPGA interface outside the loop to restore the default values defined in the FPGA - target.vi the analog output voltages. However, the values are not reset, but remain at the last value in the loop.

  The only thing that works is by using the method of interface FPGA download instead of resetting one after execution of the loop.

  Any ideas why the reset function and/or stop does not work?

  Thank you very much!

  Can you post your code? I guess that the analog value is never sent when you stop. The program closes faster than analog writing. That would be my guess based on the way you have described.

• attack targets different rt by changing IP in the host program

  Hello

  I have two targets of RT running on desktop computers. Programmatically, I would like to change the IP address target in a single host program, so that I can control one or the other targets. I thought the 'Library Library.Deploy' Invoke node has an entry for the target IP address, but my libraries are already on the objectives, then maybe this isn't the right way to go.

  I look forward to a response...

  Tim.

  Hi Tim,.

  I tested this on my side DataSocket method and it seems to be work correcly. I'm sure we can work together to determine what is happening here. If a space is in the name of the variable, just type a space in the URL DataSocket should work. Looking at the view "------codes display", you can see the \s which is added to the URL.

  The URL (to be more precise) format must be psp://ComputerName/LibraryName/VariableName.

  Have you checked that your variables on your remote systems are deployed? Distributed System Manager is an excellent tool for watching this.

  Kind regards

  Casey Weltzin | Product Manager in time real LabVIEW | National Instruments

• LabView RT versionconflict between the host and target

  Hello everyone,

  for my diploma, I work with a compact system in rio (cRIO-9074) with two I/O-modules. After some research, I created a small project which includes an fpga - and a host vi. I wanted to test my project, so I've compiled the fpga vi and you want to run the host-vi. But then I got an error that said that the versions of the software LabView real-time between the host PC and target (is the cRIO-controller meant?) are different.

  As a solution, I was told to check versions and reinstall the software Real Time using MAX. Now my problem is that I don't know where I can check the version and/or how I can solve the problem to get the project running.

  I added the errorwindow (in German) as an attachment.

  I hope you can help me.

  Better subject.

  Schu3

  MAX is measurement and Automation explore National Instruments.  Open, then expand "remote systems".  You should see your cRIO system.  Expand and you will see 'software' in the list.  Right-click on it and choose to install the software.  That will open a window that will allow you to select what software and what version to install on the cRIO.  Install the version of LabVIEW that matches the one that you use for development.

• SIT error 14104, dll runs on the host, but not on the target

  Hello

  I have problems of deployment dll (compiled in 2007 with Microsoft Visual C++ .NET 2003) Simulink in LabVIEW (2009 SP1). My target system is a desktop PC with LabVIEW Real-time 9.0 installed.

  I created a simple Simulink model which mulitplies an entry with a Gain and returns the result. I compiled using the nidll.tlc as a target file system.

  Then, I created a LabVIEW RT application that uses this DLL. I created exactly the same application as the host VI and VI target. On the host VI everything works fine. On the target VI, I get error SIT 14104.

  What I did to solve this problem? I followed the steps on http://digital.ni.com/public.nsf/allkb/C7FF960E0A6C219A8625729600104615 . I have manually deployed the dll on the target computer. I used the suggested compiler. There is a lot of memory on the computer (RAM and HDD) target. And I'm not using a CRio system.

  Does anyone have an idea how to fix this error? I will attach the sample project labview and the MDL and DLL to this post. Don't forget to adapt the DLL-path if you test the program.

  Kind regards

  Thomas

  Well I found a solution.

  I had to deploy the DLL manually on the target, but not in ftp://IP_Address/ni-rt/system/ as the link above is said but rather in ftp://IP_Address/ .

  Problem solved.

  Kind regards

  Thomas

• I share the same target iSCSI with multiple hosts?

  I have an iSCSI LUN target that appears when I discovered the storage for an ESXi host, but when I discovered the storage for another host, it does not appear. I added the suitable adapter software network and iSCSI on the second host, dynamic analysis and he sees the same iSCSI target, however when I go to 'Add a storage' there is no displayed LUN.

  I'm obviously missing something, I just can't understand what it is.

  Any help would be greatly appreciated!

  Storage Area Network - FC and iSCSI - do not automatically appear LUN to all hosts that connect to them. This is also called masking and prevents accidental access to LUNS of the host that is not allowed access to that LUN. You must configure the storage system, access to the LUN - once you do this for the other hosts will be displayed in the list and you will be able to access all hosts logic unit number.

  To avoid trampling of the ESXi put a lock on the VMDK so that a subsequent host will not be able to power of the virtual machine and write than disj virtuak

• How to find the interface using the table name target

  Hi friends,

  Whether it's with the help of the name of the target table, it is possible to find the name of the interface that invokes this target in ODI 11.1.1.7 table.

  Thanks in advance.

  Kind regards

  Saro

  Highlight the data in the browser store, expand its sub-tree, there is a node "filled in", under the node, it lists all the data stores that are used as sources for the current data store

  then expand "used by"-> interfaces, it will display all interfaces include the current data store (but maybe the current data store is used as a source)

  That's all you can get user interface, otherwise I guess you can use the SDK.

• Remove emctl blackout/target for the host that no longer exists

  Hello
  I have a power outage set via emctl command line for a host. The host was then taken out of service until it could be removed from EM. Now, I can not remove the failure or target EM as the power failure has been fixed through emctl. I can't access emctl to end because the server was decommisioned. What should I do to remove the target?

  Host: Linux

  Agent: 10.2.0.5

  WHO: 10.2.0.5

  As you have decommissioned the host already guess that historical control data to the host and its monitored databases are no longer required.

  In this case, you can cleanup the agent to the repository which will also clean up the host and control objectives information completely and permanently.

  10G we can do this by connecting to the repository as SYSMAN,

  SQL > exec mgmt_admin.cleanup_agent ('. : 3872');<== this="" deletes="" the="" agent="" and="" all="" the="" targets="" for="" this="" agent="" from="">

• Target ball and ball over Active on the host with a lot of free memory

  Just at the moment where I think I understand the management of the ESX memory, something confuses me once again.  My understanding of the balloon pilot, is that when an ESX host has need of more memory to be allocated to other virtual machines as the VMKernel steals memory back from the virtual computer running.  However, I have a virtual machine which seems to indicate that the target of ball is well above what is memory 'Active', and the host ESX virtual machine running on a 6 GB of unused memory.  I think that this might have led this virtual machine to go into a State of forgetfulness once already, because I found it does not, only to discover that she used only 30% of CPU and 2 GB Active out of 6 GB of memory allocated, but making a ton of swap memory.  What gives?

  Why in the world of the balloon pilot would target memory on a VM running busy, when there is a lot of free memory available on the host, and why would be a beginning of comments Exchange when it uses only a fraction of the memory allocated to it and the host is sitting on the free memory pletty?  None of my other virtual machines have memory usage charts that look like this.

  This can happen even in the absence of resource pools. Check your settings of VM, "resources" tab and make sure that the unlimited checkbox that she checked on the memory and CPU...

• Is it possible to choose between different targets (different configurations NI 6587) FPGA through the host VI

  Hello

  I use card FPGA 7966R with Module of e/s 6587. I have two sets of screws FPGA, one that uses 6587 mode series (Serdi channel) and the other in parallel mode (Serdi connector). I'm trying to select one of the FPGA VIs via the host VI and I don't know if it's possible.

  Some things to note:

  • All IOs have the same names, FIFO has the same data type and name.
  • Because they use the IO 6587 controller in a different configuration, I can't parallelize them and combine them into a single VI.

  Thank you

  MILIN

  You should take a look at the function of Bitfile dynamic reference opened .

• Update comments before the host tools

  Hello

  Our backup software (TSM for EV) checks if the VMWare Guest tools are 'in progress', before you perform the backup of the application.

  This means that when we improve a host for the new version, the backup of the application of all the virtual machines on the host will fail, until the tools are upgraded.

  
  

  However, the cheque will go through if the comment tools version is newer than the version of the host.

  Then...

  Is it possible to orchestrate the tools update to a newer version than the tools on the host?

  (In addition to using a single host 'host jump' update for updates, and migration of virtual machines on that host one).

  Best regards

  Martin

  
  

  
  

  Is it possible to orchestrate the tools update to a newer version than the tools on the host?

  Yes, it's possible and fully supported to run versions of VMware Tools in the guests who are more recent than the ESXi host versions. For example, you can use the latest tools of U1 6.0 even on the hosts 5.x. see: product VMware interoperability matrices

  To obtain and deploy the latest tools, you have a couple of different options available; you don't need to bother with a "host of jump' or whatever it is.

  1. just update the package tools-light of your guests, for example with MUV. This beautiful thing is this can be done online and requires no maintenance mode or a reboot of the host. Make sure that no virtual machine currently has VMware Tools mounted ISOs.

  2 extract the ISOs tools the bundle version (patch) of target offline or installing ESXi ISO.

  3 download https://packages.vmware.com/tools/esx/index.htmlTools packages. These correspond exactly to those of the packages included in the packages offline (patch) or installation ISOs. (Just get the .exe files big, no need to enter an ISO.)

  4 download the new standalone version 10.x of the tools of:

  https://my.VMware.com/group/VMware/details?downloadGroup=VMTOOLS1005&ProductID=491

  http://pubs.VMware.com/Release_Notes/en/VMwareTools/1005/VMware-tools-1005-release-notes.html

  Personally, I prefer not to bother with the ISOs editing or updating through the vSphere Client interfaces, but using an automated custom installation with the package of relevant tools like this:

  C:\VMware-tools-9.4.12-2627939-x86_64.exe/v number! REINSTALLMODE = vomus ADDLOCAL = DELETE all the Audio, BootCamp, FileIntrospection, Hgfs, NetworkIntrospection, Unity REBOOT = ReallySuppress

  This also some unnecessary components like unity, which are available on the position of work/Fusion/player, and eliminates a forced reboot.

• delete the host controller real time program

  using NI9642 sbrio host in the sbrio real-time like a startup program now when I use the fttp: to remove the previous host program I can't remove it especially when I remove the version of the host of the project, I'm looking for a way to delete the file and work with the new real-time application program that I use it now.

  Hi AlaaShaw,

  Have you tried to cancel the deployment of the executable to the target and then deploy the new application?