report in SRM of VM "protected".

Similar Questions

• Cannot export the history report to SRM 5.8.1

  Hello

  Basically, I have my main recovery plan, and I have done testing/cleaning/migration/re-protects all ok, but I want to export history reports.

  I choose the type of report I want (html/doc, etc.), I click on generate report. It generates very well. But when I click on download... I get nothing. I click on it and click on it and nothing happens?

  I tried chrome and firefox, I restarted the service of srm on the two sites, the WebClient service on both sites. I had another user tries and no joy, I simply can't the report to export.

  But any other plan, plans I have no interest in. Any fine export?

  I have connected a deal with VMware support, but I'm curious to know if anyone has come across this problem?

  See you soon

  Might be a bug known - the Recovery Plan has a special character in the name, such as / or %?

• Any use of the SRM group queryvmprotection protection method?

  I am trying to find a list of VMS protected status, in particular the statutes, which are problems (lack the hard drive for example).

  Usually this appears in the Protection Group-> VMS as ' device not found: hard drive X.

  Looking through the api, queryvmprotection method of protection groups can have a "field of situation.

  I used the BenMeadowcroft function to get the protectiongroup and then tried to pass moref a vm in the method

  SE connect-VIServer < vcserver >

  Connect-srmserver

  $pgs = get-ProtectionGroup

  $vm = get - VM, vm >

  $pgs [0] .queryvmprotection (@($vm.) ExtensionData.MoRef))

  I get the following error.

  Exception by calling 'QueryVmProtection' with '1' arguments: "value cannot be null."

  ' Parameter name: collection.

  C:\Users\ < myusername > \Desktop\funcs.ps1.ps1:452 char: 26

  + $pgs [0] .queryvmprotection < < < < (@($vm.) ExtensionData.MoRef))

  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)

  + FullyQualifiedErrorId: DotNetMethodException

  I tried passing the moref on its own (which is not part of an array) with the same error.

  Anyone have success with queryvmprotection?

  If the previous tests were my lab environment, which is installed in a shared site. I think that some of these APIs don't play well with the shared site (I had problems with the vm protect as well but not unprotect).

  In production, I did the same thing as above. With the virtual machine which should already have good configuration, it gave me the error about the collection. With the virtual machine which was really not configured, he said 'needsconfiguration' when checking for the virtual machine against the protectiongroup (as expected).

  I think I'm OK for now, I hope that the API works best with shared site in the future (maybe need a flag - remoteserver for connect-srm)?

• SRM 5.5 protect VM fails and SRM-Service stops

  The basic menu is:

  -2 x 5.5 in mode vCenter linked so 2 x RS 5.5

  -service of vcenter starts with field-account

  -Mrs. service starts with the local service account

  -the two sites are connected with [email protected]

  -folders, disc-nfs, network,... is set up for two sites (the fact cartographic inventory)

  -replication of vsphere is active and works fine

  The error:

  If I try to make a backup of the Group and to protect a virtual machine (vSphere-based replication) the process stops at 20%,

  the SRM service no longer works and a MiniDump is generated.

  The last log file entries are attached.

  In my opinion important lines are:

  error 'InventoryMapper' opID = 545DC761-00000026] will not be able to recover information primary file for VM ' vm-157'. "

  "InventoryMapper" = 545DC761-00000026 opID WARNING] cannot make recommendations for VM ' vm-157' because it is impossible to retrieve the properties of location of VM.

  error "Replication" opID = 545DC761-00000026] primary file missing for VM ' vm-157' when querying protection group ' protection-group-3008 "»»

  error "Replication" opID = 545DC761-00000026] primary resourcepool missing for no model VM ' vm-157' when querying protection group ' protection-group-3008 "»»

  Please someone have an idea on what happened here?

  It was me - stupid self - but also a nasty Bug in SRM 5.5

  I have a few virtual machines configured with access rights only for me (my AD-domain account) and to all others, including all vsphere.local NOT ACCESS.

  It is therefore correct that SRM can not read on their inventorymappings and thus not be able to protect them.

  I gave the account MRS. rights of access and the error disappeared.

  But: That the SRM service itself dies on is not a behavior that I expect in this situation.

  Seems to be a bug.

  ... resolved with the workaround...

• SRM 5.0 protect VM with oracle database

  Hi all

  l don't know if SRM 5.0 can use vSphere replication to protect VM with oracle database, please advise kindly. Thank you!

  If your Oracle DB Don t use physical RDM´s, you can use the vSphere replication.

  Kind regards

  Mario

• Bug report - named anchor - SSP page protection

  APEX 4.2.1 https://apex.oracle.com/pls/apex/f?p=57688:14
  
  The button FOLLOWING a redirect URL to Page 15 using the f? p = rating to scroll the page for an area at the bottom of the page by using a named anchor f? p =... #bottom
  
  Page 15 has the SSP Access Protection Page attribute to the Arguments must have the checksum, the redirection fails when the link is not the checksum
  
  The NEXT2 button does the same thing but uses the declarative fields to set the target of button as follows http://screencast.com/t/OOw6Q6C2
  
  I thought that sticking the named anchor * #r620 * in the field with these values and leaving the field empty page elements will be a problem, but it works very well, APEX generates the checksum in the f? p = URL and finally bugs on the named anchor. Everything as it should be, perfect.
  
  Now... when I go back to the edit page of button (4000:4314) fields are empty! http://screencast.com/t/lMMmOlF2fYgc I scratch my head of course but the behavior is always the same.
  
  Export the page shows that the button target attributes are always defined

    p_button_name    => 'NEXT2',
    p_button_action  => 'REDIRECT_PAGE',
    p_button_redirect_url=> 'f?p=&APP_ID.:5:&SESSION.::&DEBUG.:5::#r620',

  but the page Builder does not know how to handle the named anchor so it messes up the display. Of course, the button apply the changes on the complains now that the Page field is now empty, so indeed, the target page of key cannot be changed using the constructor :-(
  
  Can someone in the team of the APEX please consider what bug and advise if there is a solution? Thank you

  Hi Vikas,

  I found a solution, even if it's a little awkward. You can switch to Classic view and click the "Change all" button. It will show you the URL.

  Value for endangered, anchors # apparently received support in some parts of the manufacturer (for example the branches) in 3.0, but not in the links of the button. I'll file a bug.

  Kind regards
  Christian

• Testing failover with VMware vCenter / SRM and SQL on protected volume.

  OK, MRS. works well in test mode, although we would like to test a failover / then backspace over the weekend...

  We run SQL 2012 on a virtual machine as well as vCenter/SRM on another virtual machine, both on the protected volumes.

  If the failover stops all VM, makes a new replication then turns on the virtual machine on the DR site, it would fail because we had SQL and SRM on a protected volume?  I can understand moving protected site vCenter / SRM VM to another volume, but SQL Server is also used for other data bases we want protected.  My guess is that MRS is not smart enough to not stop SQL server last.  What should do?  What is everybody doing?

  Thanks in advance.

  You need a RS and SRMDB on both sites. The SRM on the site of DR will manage the entire process and not the vcenter/srm on the production site.

  BTW. a Microsoft SQL Server 2008 Express (R2 SP1) - 64-bit is supportet to SRMDB. Check partnerweb.vmware.com/.../interop_matrix.php

  Kind regards

  Joerg

• SRM reporting

  Is anyway to report on SRM settings - such as IP address, the data store recovery record, etc.?

  Not in vROps but you could possibly use PowerCLI to export this information if necessary.

• Messy recovery removed SRM site. SRM uninstalled protected site. Hosts &amp; VM have errors.

  Hello

  We have made some tested with SRM, of which a part has been isolated from the recovery of the site and perform a recovery of VM.

  Because it was just a test, when we did we decommissioned the site recovery test environment and uninstalled SRM of the protected site.

  Because the recovering site has been deleted messy, we continue to get errors on hosts and virtual machines that they are unable to communicate with the recovering site.

  I thought that this would be taken care when SRM has been uninstalled, but appears not to be the case.

  For the virtual machine, they display the error:

  No connection to the server of VR: do not answer. warning

  On the host on which the virtual machine is located, there are follow-up errors.

  On the hostd.log:

  [5B803B90 error 'Hbrsvc'] ReplicationGroup get-server-status request failed, try again (groupID=GID-dfe64ab6-4922-49c9-8920-de47c5758d16): not found

  On the vmkernel.log:

  WARNING: Hbr: 534: failed to connect to 192.168.30.204 (groupID=GID-14dcc90d-3e2e-4a86-8aa7-74dc9abb0569): timeout

  WARNING: Hbr: 4322: could not establish a connection to [192.168.30.204]:44046(groupID=GID-14dcc90d-3e2e-4a86-8aa7-74dc9abb0569): Timeout]

  HBr: 1064: could not find the NetWorker for groupID=GID-dfe64ab6-4922-49c9-8920-de47c5758d16

  WARNING: Hbr: 6043: could not find the NetWorker (groupID=GID-dfe64ab6-4922-49c9-8920-de47c5758d16) (order = GET_SERVER_STATE)

  How to resolve these errors happen? I have to delete the GID State above?

  Any help would be appreciated.

  Thank you

  Trent

  Hi Trent,

  Is what SRM/VR version? VRM is configured with externel DB or using embedded DB?

  Now that the recovering site has been decommissioned, VRM on the site source still think that the virtual machines are configured for replication.

  To clean the source VM configuration of replication, you must initialize VRMS with empty DB - it will remove the configuration of the replication of the VM from the source, as these configuration will cease to be present in the BD VRMS. To achieve this:

  Option A) power off and remove the old device of VR on the source site and deploy and configure a new.

  Option B) If you use VR 5.1 or 5.5 with embedded DB, it may be easier to simply click on the "Reset embedded DB" button in the UI VAMI.

  Option C) if VRMS has been configured with external DB, an alternative to redeploy the device would be to stop VRMS service (stop etc/init.d/hms), remove the old base VRMS, create a new and configure VRMS with the new UI VAMI DB.

  Once replication configurations have been deleted, you can click on "Cancel registration of vCenter Server" button in UI VAMI VRMS to unregister the extension of the VC and power off and remove the device. There will be leftovers.

  The site of recovery - data warehouses have been reformatted, but only VR devices is removed, you may need to clean records replication targets.

  Kind regards

  Martin

• Raccoon VPN error: Identity Protection mode is not acceptable

  VPN seems to stop working after a while. The console then reports the error: racoon: Identity Protection mode is not acceptable. The solution is just to stop and restart the VPN using the OS X Server application.

  Using the latest released version 5.1.5 and OS X 10.11.5 server.

  This problem is of long standing and has not been cured by OS X software or server updates.

  Hoping someone can explain what is happening and how to fix it.

  "Back to My Mac" is incompatible with the VPN service. It should be disabled on the server and on an AirPort base station, if necessary.

• Report icon that appears between the http: box box and google is missing

  In the old version of Firefox the report security icon (Trusteer endpoint protection) is located between the http; area search and the google search box. Use the report to protect a site I just clicked on the icon and asked him to protect. The icon is not visible in the latest version of Firefox, although the software is still loaded. It's on Windows 7 but on a XP machine, the icon is still there?

  You may have an older version installed. While Firefox is closed, install the latest version.

  • http://www.Trusteer.com/support/

  If this does not resolve the problem, right-click on an empty area of the tab bar and select Customize. Drag the icon from the palette on a toolbar.

  If that doesn't help either,

  1. Type of topic: support in the address bar and press ENTER.
  2. Click the display folder. Opens in a window of Windows Explorer with your profile folder.
  3. Release of Firefox.
  4. Delete the file localstore.rdf in the profile folder.
  5. Launch Firefox and new right click on an empty area of the tab bar and choose Customize, then drag the icon from the palette on a toolbar.

  If the problem persists, contact the author of the add - we support at the link above.

• How can I report an error in Windows 7 64 - bit Windows Update?

  I'm trying to figure out how to get a bug... you guys really should facilitate this.  I get message center alrets asking me to set my preferences up to date.  They have been defined many times and I really can't say whether they are actually defined and remebered or windows is not grateful, they have been defined.  I know that you do not technical issues here, but can you please direct me to the avenue good report.  Thank you!

  Windows 7 64 bit
  Build 7100
  Ausus M3N72-D
  AMD Phenom 2 quad core edition Black 950 (3 ghz)
  8 GB RAM
  750 GB sata HD
  Plextor sata dvd - rw
  BFG nVidia Gforce GTX 285 OC with 2 gigabytes of ram

  Hello

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I get windows to download an update continually reports error N0. 646 "WindowsUpdate_00000646" "WindowsUpdate_dt000"

  How can I get windows to accept an update it continually indicates is available but does not download and an error message no. 00000646?

  "WindowsUpdate_00000646" "WindowsUpdate_dt000"

  Hello

  It is a Microsoft Fixit who will help with this issue.

  You receive code 646 error or error code 0 x 80070646 when you try to install Microsoft
  Office updates
  http://support.Microsoft.com/kb/2258121

  Check this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't remove the write protect my USB

  Hello.. I'm having the same problem, I tried to follow what has been given, yet, I couldn't do something and it makes me nut. I saw someone who had the same problem that I have now... .but I couldn't do something with him... Please help

  Try the drive in another computer.  If both report errors such as "write-protected" then it is very likely the drive has failed and needs to be replaced.

  writing in the new message: * e-mail address is removed from the privacy... *

  Hello.. I'm having the same problem, I tried to follow what has been given, yet, I couldn't do something and it makes me nut. I saw someone who had the same problem that I have now... .but I couldn't do something with him... Please help

• Network Access Protection agent

  Windows maintenance Center reports that the 'Network Access Protection Agent' is turned OFF.

  How do I activate it?

  Hi Jose,

  The computer is on a domain network?

  The network access Protection agent service collects and manages health information for client computers on a network. The information collected by the NAP agent are used to ensure that the client computer has the required software and settings. If a client computer is not compatible with the health policy, it can be equipped with restricted network access until their configuration is updated. Depending on the configuration of health policies, client computers may be automatically refreshed allowing users to quickly regain full network access without having to manually update the computer. It is especially where the computer needs to access a network of business domain.

  Follow these steps and check:

  a. press the Windows key + R

  b. type services.msc in the box run to search for, and then click OK.

  c. Locate the Agent of network access Protection service.

  d. right-click on it and select start.

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.