SRM 5.0 protect VM with oracle database

Similar Questions

• Microsoft Visual Studio 2012 with Oracle database

  Hello!

  I'm a developer Oracle of Pakistan. Currently, I have a lot of desktop applications. Now, I want to develop web applications for which I think to use Microsoft Visual Studio 2012 with Oracle Database 11 g on the back-end.

  Please guide me on the software/hardware required for Microsofot Visual Studio 2012 and also to confirm the compatibility between Microsoft Visual Studio 2012 with Oracle database.

  Concerning

  Mohammed Uzair

  Oracle APEX developer

  Oracle applications developer

  + 92 (333) 7058754

  Hello

  I suggest you post the same question in the Microsoft Visual Studio category in the Microsoft MSDN forum for assistance.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

• Unable to make the connection with oracle (database sqlserver) non-oracle

  We are unable to connect with the database of sql server after you have created the dblink to the oracle server.

  tnsping everything works very well between the oracle and SQL Server for database, database

  Please provide us with the solution for this problem.

  The problem is that the HS_FDS_CONNECT_INFO in theinit .ora bridge was not properly configured.

  Using the format-

  HS_FDS_CONNECT_INFO =//.

  has permits the connection works.

• Android with Oracle database (how to implement?)

  Hi guys,.
  
  I use Andoroid emulator and Java Eclipse. I want to install the Oracle database on android
  
  
  http://download.Oracle.com/docs/CD/E12095_01/ doc.10303 /e16214/instsqlite.htm#CACIAACF
  I did a few studies based on this tutorials. but I don't understand how implements this
  
  How to install this software "SQLite Mobile client software"
  
  What is c?
  
  n the SQLite Mobile client, open a browser to point to the Mobile Server using the following URL.
  
  http:// < mobile_server >: < port > WebToGo/Setup
  
  PLSS help I am a beginner of android developer
  How to solve this problem. ???
  
  Thank you

  You cannot install the Oracle database on android. Android already comes with SQLite installed on the device. The customer Mobile Sync allows you to synchronize between the SQLite database client and a database server Oracle Enterprise.

  I hope this helps.

• Problems with the OAS 10 g x 86 with Oracle database 64-bit

  Are there issues or problems with running on 64-bit Red Hat 4 AES, Oracle Application Server x 86 and x 64 Oracle database?
  
  Published by: Mika_ on June 22, 2010 08:22

  Our data base are all the 64-bit and 32-bit application servers.

  Going on 9 months without any known because of this problem.

• APEX 3.1.2 works with Oracle Database 10g?

  APEX is included in Oracle Database 10g? If not, and if I uploaded it separately, will it work with an Oracle 10 g database on Linux installation?
  
  I tried is the companion of the Oracle 10 g, but this CD seems HTML_DB worm: 1.6 or something.
  
  where can I find an installation guide for installation of the APEX 3.1.2 on Oracle database 10g linux because all the scenarious installation I found seem to be for oracle 11g database or oracle 10g application server.
  
  Thank you.
  

  Request Express is not provided with 10g but as Paulo said, he will work with Oracle 9.2.0.3 or later. You can download it using the links on the pages, he said.

  Scott

• Deploy the adf on glassfish with oracle database server.

  I am trying to create a connection from the pool on glassfish 4 oracle database server.

  but I could not. I was trting to ping and show this error ping Connection Pool failed for audio. Class name is incorrect or classpath is not set to: oracle.jdbc.pool.OracleDataSource

  GlassFish 3.1 is supported, 4.x is not.

  Oracle JDeveloper and ADF 12 c (12.1.3) supported systems

• With the help of OBIEE with Oracle Database Express Edition? SOLVED

  I have a customer who wants a quick demo of OBIEE. They sent us as data source csv files. I migrated the Excel files for ease of use, but Excel files seem to have limitations on how I can combine columns, such as the concatenation and formatting.
  
  I then loaded them in a database Oracle Express Edition, assuming that more "database" functionality would be placed at my disposal. I managed to load in the Administration tool, but the answers gives me the following error when I try to view the results of the Express database:
  
  ODBC driver returned an error (SQLExecDirectW).
  Error details
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 17001] Oracle error code: 12154, message: ORA-12154: TNS: could not resolve the connect identifier specified in the call to the OIC OCIServerAttach. [nQSError: 17014] Cannot connect to the Oracle database. (HY000)
  SQL issued: SELECT COURSE_ENROLLMENT. CAMPUS saw_0 FROM BI_DEMO ORDER BY saw_0
  
  Thanks for any help. This is my first attempt using OBIEE unguided.
  
  Published by: markstuartnelson on September 29, 2008 17:22

  Check your TNSNAMES file, see if it points to the correct server / db.

  Best regards, John
  http://obiee101.blogspot.com/

• Need help with Oracle Database Backup &amp; Restore Cold

  Environment:

  Oracle Version: 11.2.0.4

  Platform: AIX

  A few weeks ago, I had updated my Oracle 10.2.0.1 to 11.2.0.4 database. The customer changed his mind and now I downgrade to 10.2.0.1. Unfortunately, the compatibility setting is set to 11.2.0.4. So I can't use the lower upgrade scripts.

  I had taken a cold backup of the database before the upgrade. Unfortunately, I missed save logs for recovery.

  Is there a way I can always downgrade / recovery 10.2.0.1 with cold back? or is it simply not possible without the backup of redo logs.

  Thanks in advance.

  rogers42

  I had taken a cold backup of the database before the upgrade. Unfortunately, I missed save logs for recovery.

  And what do YOU mean by "had taken a cold backup"?

  Because in addition to what John said, you also need the correct initialization file.

  Do you have a return of this init file which was taken at the same time as the backup?

  I had updated my Oracle 10.2.0.1 to 11.2.0.4 database.

  I suggest that you first reinstall the 10.2.0.1 version or Oracle before recovering your cold backup.

  You must use the EXACT name of the folder structure and file that have been used originally.

  See my response in this thread a few years ago:

  Re: Restore incompatible cold backup

  You will be able to simplify this process, some given that your backup is consistent, but the steps should help you to understand what to do.

  One of my answers in THIS thread has real details for each of the steps in the other thread

  https://community.oracle.com/message/10132328?

• JDeveloper ADF 12 c with oracle database 10g

  Hi all

  We have purchase a license for oracle application server 10g and 10g R2 database.

  my request is that we could use the Jdeveloper 12 c with ADF against the above specifications?

  If Yes, how much would it cost?

  our Organization cannot afford the latest versions of oracle. (this is why we are stuck at the 10g database).

  I want to develop an application for our organization using jdeveloper ADF.

  Kindly guide me.

  This is not a sales forum. As I have already said, you should contact an Oracle sales person who can answer your question. There are ways of possible migration which will save you money (for the purchase of new licenses).

  I'm not saying you must upgrade to 12 c. You can develop applications using the old technology using jdev 10 g with OAS 10 g and Oracle DB 10 g.

  If you want to use a newer technology (jsf2.0...), you need to update because these are not available in 10g. The issue if you need to update to 11g or 12 c (jdev), you must answer yourself and can ask the seller too. 12 c is the latest technology and the question is whether you need later. 11g if jdev version that is used internally by Oracle and is on the marked a period of time.

  Timo

• Configuration of DNS for the ANALYSIS used with Oracle Database 11g Release 2 RAC

  Hi gurus,
  
  I am on how to install oracle RAC 11 g 2, ANALYSIS required for installation, but I do not know how to configure the SCAN with DNS. Have a guide/note/document setup to install DNS configuration for ANALYSIS, can help me to overcome installation CARS with SCAN (single Client access name)
  
  Please don't bother me on my English terible
  
  So thank you
  Ch

  There are a lot of useful documents on the net:

  http://www.Oracle.com/technetwork/database/clustering/overview/scan-129069.PDF

  http://wiki.Oracle.com/page/Oracle+RAC11g+R2+single+client+access+name-+scan

  http://www.garrettseibt.com/database/?p=208

  Best regards

  Gokhan Atil

  -------------------------------------------------------
  If you answer this question, please mark appropriate as correct/useful messages and the thread as closed. Thank you

• Problem compiling forms in weblogic with oracle database 10 g 2

  Hi all,

  I have weblogic 10.3.6 with Forms services under redhat5, I compiled a form with a user under a database11g and the .fmx file is generated, oe n I a database 10 g 2, when I tried to compile the same form with a user in the context of this DB it give me "has not created the form" nd when I checked the problem I found that it gives me the problem in each statement that connect to the database (select call procedure...) have you ideas, thank you for your answers

  Hamid yes I am able to connect to the database 10g, I did some research and I found that weblogic Forms services work with DB 10.2.0.4 or we have to DB11g, so we will know our customer is.

• JDeveloper compatibility with Oracle database v12.1.0.2

  What version of JDeveloper is compatible with the v12.1.0.2 database

  JDeveloper is a Java IDE and has no compatibility with databases.

  ADF is a framework - it is certified against different versions of the database. If you simply Google "Compatibility matrix Jdeveloper" you will find the answers you are looking for. Information on certification

• SPFILE and PFILE with Oracle Database 11g

  Hello
  I have a database of Oracle 11 g (11.2.0.1.0) on Solaris, my question is, in this case, I can use a database PFILE or SPFILE?
  
  Thank you

  Hi Mark,

  It is a feature of 9i (I don't remember 920 or 901), but what I wanted was that since 11.1, DBCA would create a spfile only and not the pfile file when the database is created via it. I can't seem to find the link of reference and don't really remember not where I read it also. Will update the thread once I will find the exact statement and the source of it.

  Concerning
  Aman...

• Interoperability Notes Oracle EBS 11i with Oracle Database 11 g 2 (11.2.0.1)

  Hi hussein.
  
  EBS 11i
  DB 9.2.0.6 > upgrade to 9.2.0.8 > > to 11.2.0.1
  RHEL 4.6
  
  I applied all the patches pre-required for the upgrade of database. There are tasks almost 35 that I did.
  not including the database of GR 11, 2 of which I am still installing.
  
  I am now to install the GR 2 11 again a new home, by instruction of docs.
  
  As usual the installation of RPM linux prerequisites, which are:
  

  RHEL4
  
  binutils-2.15.92.0.2
  compat-libstdc++-33-3.2.3
  elfutils-libelf-0.97
  elfutils-libelf-devel-0.97
  gcc-3.4.6
  gcc-c++-3.4.6
  glibc-2.3.4-2.41
  glibc-common-2.3.4
  glibc-devel-2.3.4
  glibc-headers-2.3.4
  libaio-devel-0.3.105
  libaio-0.3.105
  libgcc-3.4.6
  libstdc++-3.4.6
  libstdc++-devel-3.4.6
  make-3.80
  numactl-0.6.4.i386
  pdksh-5.2.14
  sysstat-5.0.5

  I ask the above required patches if they are already installed on our server.
  I used this query:
  

  rpm -qa 'binutils-*'
  rpm -qa 'compat-libstdc++-*'
  rpm -qa 'elfutils-libelf-*'
  rpm -qa 'elfutils-libelf-devel-*'
  rpm -qa 'gcc-*'
  rpm -qa 'gcc-c++-*'
  rpm -qa 'glibc-*'
  rpm -qa 'glibc-common-*'
  rpm -qa 'glibc-devel-*'
  rpm -qa 'glibc-headers-*'
  rpm -qa 'libaio-devel-*'
  rpm -qa 'libaio-*'
  rpm -qa 'libgcc-*'
  rpm -qa 'libstdc++-*'
  rpm -qa 'libstdc++-devel-*'
  rpm -qa 'make-*'
  rpm -qa 'numactl-*'
  rpm -qa 'pdksh-*'
  rpm -qa 'sysstat-*'

  And I got the ff: output
  

  compat-libstdc++-33-3.2.3-47.3
  compat-libstdc++-296-2.96-132.7.2
  gcc-java-3.4.3-9.EL4
  gcc-g77-3.4.3-9.EL4
  gcc-c++-3.4.3-9.EL4
  gcc-objc-3.4.3-9.EL4
  gcc-gnat-3.4.3-9.EL4
  glibc-common-2.3.4-2
  glibc-devel-2.3.4-2
  glibc-headers-2.3.4-2
  glibc-kernheaders-2.4-9.1.87
  libaio-devel-0.3.102-1
  libstdc++-devel-3.4.3-9.EL4

  I mounted the RHEL 4 DVD Installer and I am looking for the following hotfixes:
  I use the following command to search:
  

  ls -l binutils-*
  ls -l compat-libstdc++-*
  ls -l elfutils-libelf-*
  ls -l elfutils-libelf-devel-*
  ls -l gcc-*
  ls -l gcc-c++-*
  ls -l glibc-*
  ls -l glibc-common-*
  ls -l glibc-devel-*
  ls -l glibc-headers-*
  ls -l libaio-devel-*
  ls -l libaio-*
  ls -l libgcc-*
  ls -l libstdc++-*
  ls -l libstdc++-devel-*
  ls -l make-*
  ls -l numactl-*
  ls -l pdksh-*
  ls -l sysstat-*

  And my output is:
  

  binutils-2.15.92.0.2-10.EL4.i386.rpm
  compat-libstdc++-296-2.96-132.7.2.i386.rpm
  compat-libstdc++-33-3.2.3-47.3.i386.rpm
  elfutils-libelf-0.97-5.i386.rpm
  elfutils-libelf-devel-0.97-5.i386.rpm
  elfutils-libelf-devel-0.97-5.i386.rpm
  gcc-3.4.3-9.EL4.i386.rpm
  gcc-c++-3.4.3-9.EL4.i386.rpm
  gcc-g77-3.4.3-9.EL4.i386.rpm
  gcc-gnat-3.4.3-9.EL4.i386.rpm
  gcc-java-3.4.3-9.EL4.i386.rpm
  gcc-objc-3.4.3-9.EL4.i386.rpm
  gcc-c++-3.4.3-9.EL4.i386.rpm
  glibc-2.3.4-2.i386.rpm
  glibc-2.3.4-2.i686.rpm
  glibc-common-2.3.4-2.i386.rpm
  glibc-devel-2.3.4-2.i386.rpm
  glibc-headers-2.3.4-2.i386.rpm
  glibc-kernheaders-2.4-9.1.87.i386.rpm
  glibc-profile-2.3.4-2.i386.rpm
  glibc-utils-2.3.4-2.i386.rpm
  glibc-common-2.3.4-2.i386.rpm
  glibc-devel-2.3.4-2.i386.rpm
  glibc-headers-2.3.4-2.i386.rpm
  libaio-devel-0.3.102-1.i386.rpm
  libaio-0.3.102-1.i386.rpm
  libaio-devel-0.3.102-1.i386.rpm
  libgcc-3.4.3-9.EL4.i386.rpm
  libstdc++-3.4.3-9.EL4.i386.rpm
  libstdc++-devel-3.4.3-9.EL4.i386.rpm
  libstdc++-devel-3.4.3-9.EL4.i386.rpm
  make-3.80-5.i386.rpm
  numactl-0.6.4-1.13.i386.rpm
  pdksh-5.2.14-30.i386.rpm
  sysstat-5.0.5-1.i386.rpm

  My question is, I have made the right choice?
  
  I have taken note of some of the following:
  example:
  
  The number of ROUNDS required is > gcc 3.4.6
  But the CD has > gcc - 3.4.3 - 9.EL4.i386.rpm
  
  Who's down right? Can I still use it? If not, my question is: why Oracle asked for a more recent version of the DVD
  Installer can offer? Do I need to use the RHEL 5 DVD Installer instead?
  
  Thank you very much

  My question is, I have made the right choice?

  Yes.

  I have taken note of some of the following:
  example:

  The number of ROUNDS required is > gcc 3.4.6
  But the CD has > gcc - 3.4.3 - 9.EL4.i386.rpm

  Who's down right? Can I still use it?

  No, you must use the exact (or higher) version.

  If not, my question is: why Oracle asked for a more recent version of the DVD
  Installer can offer? Do I need to use the RHEL 5 DVD Installer instead?

  No, use up2date or download the package from the internet (I think you already have Web sites) and apply it.

  Thank you
  Hussein