report interactive apex 5, pivot action does not display columns in the application developed on 4.2.6

Similar Questions

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  That's what I have I am trying to download adobe programs

  which is not a download error unless you use some sort of download manager/assistant that is also trying to install.  do you have a download manager/assistant?

  or is it an error of installation and, if so, what type of program (name and version) are you trying to install?

• I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I had the same problem - my solution:

  1. If you create a connection to Adobe, make sure that you click the verification link in the email sent to you to verify your account.

  2. I leave the download Assistant, then began the process to download the original page download Assistant - he asked if I wanted to run the already downloaded version, which I chose.

  3. once the download wizard opens again, I logged in using my newly created connection and then, he showed the free trial in the product list (it has not been listed as free, but it was).

  My download is happening now - about 1 hour to go.

• Could not open install Assistant.  I get this error message: cannot install the application due to a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not

  How do I download a trial of 12 items, Adobe?

  I followed the instructions to download assistant... but get this message: the application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the author of the application.

  Hi alposer,

  Please delete the copy of Adobe Download Assistant you have installed, and then reinstall Adobe Download Assistant.

  Kind regards

  Rave

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• Put in regular page of e-mail does not display message in the list messages

  Hello

  I've updated my MacBook Pro at El Capitan and my wife Airbook.

  We both use the classic layout in Mail.

  After the update my Mail shows the message in my message in the message list a list (as it always does) I use this option so I don't have to double-click Mail and open it in a window separate to read.

  On Airbook my wife a message highlighted in the list does not appear in the list. (there is a small circle at the bottom of the list and hovering over him the cursor moves on the symbol to stretch or shrink the window, but it is just not there). She had it works just like mine before moving to El Capitan.

  This thread: Mail (El Capitan): display the preferences

  "says:

  Use Classic layout

  By default, messages are displayed next to the list of messages. To make messages appear below the list of messages (typical configuration), check the box. »

  I'm not sure what this explanation or if she's talking about my problem.
  I have no idea how to get the classic page layout to work the way it did before.
  Can someone help me get mail on the Airbook to redisplay the message highlighted in the list under the list?

  THX
  Brick

  Hello brick,

  Thank you for using communities of Apple Support.

  I see that your wife's Mac shows the display of the message during the classic presentation.  As you can see the small circle at the bottom of the screen, indicating that the screen has been pushed all the way down, eliminating the part look at a message.  Simply click, hold and drag the symbol upwards to bring this part of the Mail window.

  See you soon.

• Changing the settings to default print with CUPS still does not work, regardless of the application

  Hello, I looked through a number of positions on the definition of default printer in a Mac, but nothing solve my specific problem. I recently spent a PC to a MacBook Pro, just updated to Mountain Lion and installed my printer wireless, HP Deskjet F4500 Series, with the pilot chosen by my computer. The printer-computer connection usually works, but when I go into the CUPS and change the default settings for Fast Draft, n/b only, it does not apply when I print. I tried several times, making sure to save my default settings in CUPS (and indeed they appear here as Fast project, b & w only), but no matter which application print from - Safari, Chrome, text edit, etc.. - it prints in color and normal mode unless I manually selects the settings for that particular print job. This is especially a problem when printing things that are not pop up a print dialog, such as online coupons. I could easily change the settings of the default printer on my laptop and they apply to coupon print as well, but I'm having no luck with the Mac. Help, please! Thank you!

  Finally I got it solved!

  There are two options in Mountain Lion when you add the printer HP CM1415fn (Apple-> preferences-> Print & Scan system): "AirPrint" and "HP LaserJet CM1410 Series.

  So, with "AirPrint" set default CUPS Options has no effect, even if you change. PPD file.

  Fortunately, with the 'HP LaserJet CM1410 series' setting CUPS the default Options works well!

• HDMI does not display windows, but the BIOS displays

  Hello world

  so I have a little funny problem.  We have a LAN party at my place where I created my office with the TV as a second monitor.  Graphics card is an AMD Radeon HD series 8600.  My main monitor is a Dell ST2420L monitor connected via HDMI.  Cable tv was a standard vga.  Setup worked very well until I took apart.  For some reason any Windows do not forget the television once I unplugged it so I fiddled with the settings... bad idea.

  So now, Windows will happily connect to TV with VGA and HDMI and run very well (it also automatically changes whether the primary monitor for a reason if the two are connected), but my normal monitor will show all things BIOS until windows starts with HDMI and works very well with a VGA.  I know I could just switch to vga, but I really like my HDMI and I really want to know exactly how I messed up it if someone has an idea.

  Thanks for the help.

  The resolution is probably set up as something that that does not support the monitor (if I had to guess, is that the resolution of the TV was great, but it could be anyway).  Connect it to your TV so you can see the screen, click the wallpaper and choose the resolution of the screen and turn the slider all the way down and apply it.  Then reconnect your monitor.

• WMP does not display all of the content of the flash player

  I have a Dell Inspiron 620 with Windows 7 Home Premium, Service Pack 1.  I have synced 10GB of music on a flashdrive 16 GB genre: 'Sixties' "Seventies", "Jazz", "Guitar", "Fifty", "Latin", and so-forth. I looked at the progress of synchronization, just to be sure, and it's all about the drive. When I try to view the content, less than half of the kind is displayed by WMV, but it displays all ten in the edition of Windows XP of WMP. I have tried different brands of flashdrives, samey-same, no joy.

  Physically, I can open the player and display content, but this WMP is not 'read' more than four of the ten kind I put in place. Is this a known problem, and if so is there a solution for this? I tried to 'reconstruction' of WMP, once again no joy. I activated the option "Show-hidden-files-and-folders, nada...» "I also tried the link Windows Fixit with zero luck. Should I empty this drive and get a previous series?

  Hello
   
  Welcome to the Microsoft community!
   
  According to the description, it looks like the other kind is not detected in Windows Media Player.
  However, we need for more information on this issue. Please help me to answer these questions.
   
  1 have. what fixit you tried?
  2 have had any changes made to the computer before the question?
   
  I have a couple of steps that should help you to solve this problem of troubleshooting.
   
  Method 1:
   
  Run the troubleshooter of Library Media Player and check:
   
  Open the troubleshooter in the Windows Media Player library
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
   
  Method 2:
   
  Visit this link and try the manual synchronization if automatic synchronization does not work.
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-device-to-sync-in-Windows-Media-Player
   
   
  In addition to visit this link to learn more about the Windows Media Player synchronization
   
  Windows Media Player sync: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-sync-frequently-asked-questions
   
  Hope this information helps. If you have any questions with Windows do not hesitate to answer and we will be happy to help.

• SmartView does not display columns in form of planning

  Hello

  I use the new version of Hyperion Planning 11.1.2.4 and Smartview it does not show the dimensions that I put in the columns.

  Is this a known bug resolved in any recent PSU?

  Thank you

  The form appears in web planning, there may be no valid line, screen shot of this question would be useful because there should not be problems.

  See you soon

  John

• My custom workspace does not randomly.  Restart the application sometimes fix it.

  Y at - it a fix for the problem of my custom workspace does not not every time?  I was hoping that it was just a problem with CC2014.  I'm under CC2015 now.

  Quit Illustrator

  Run disk utility and set your permissions.

  Finder (hold down the Option key) > select Library > obtained in this folder

  / Library/Application Support/Adobe/Adobe Illustrator 19.

  Adobe Illustrator 19 and rename old Adobe Illustrator 19

  Start Illustrator

  I would upgrade to El Capitan.

• Bridge does not display thumbnails of the G10 Cr2 files

  I saw this discussion, but no response that helps.   I have CS4 and installed ACR 5.2 and 5.3 updates.  I moved the camera raw.8bi file for the bridge and photoshop formats.  Opens in Photoshop, but does not appear in the bridge.  Am I missing a step somewhere?  Any suggestions?

  kinidaho wrote:

  I saw this discussion, but no response that helps.   I have CS4 and installed ACR 5.2 and 5.3 updates.  I moved the camera raw.8bi file for the bridge and photoshop formats.  Opens in Photoshop, but does not appear in the bridge.  Am I missing a step somewhere?  Any suggestions?

  The file of camera raw.8bi must be only in one place:

  Program Files Adobe Plug-Ins\CS4\File Formats

  and, before you put that there, all previous versions must be removed.

  And purge the Cache of bridge.

  Location for Vista 64-bit is different.

• My Satellite P300D starts but does not display anything on the screen

  When I start my laptop it turns on but shows nothing, sometimes it works perfectly, and after that when I restart my laptop the screen remains black. Sometimes the screen just after 2. 3. Turn - offs, but sometimes not.
  Sorry for the bad English, I hope you know what is my prolem...
  Ty :)

  I know what your problem is, but the question is why this happen. Is this problem occurs sporadically and to me it looks like a connection problem. On this virtual path, it is not possible to provide the exact diagnosis.
  That may be, is contact FL inverter, contact screen motherboard or something with the graphics card.

  In any case, it's probably unwanted material.

• Timekeeper group does not display data from the former employee

  When you set up a group of timekeeper, we cannot find any former employees.

  If a employee leaves mi period... and if the timekeeper may not display former employees, how would (s) he enter/edit data?

  
  

  Thank you

  Alex
  

  Hi Alex,

  Yes, the final processing date should be later or null if you are not allowed to change the date of the final trial and you can try to change the date of entry into time guardian Group screen for before January 31, 2016 "and find the employee. "

  Kind regards