Report number: Invalid rowset requested, the source of the report data

Similar Questions

• How to remove the message «Invalid rowset requested...» »

  Hello
  
  I have a problem where the following error message ('Invalid rowset requested, the data source of the report have been amended. Reset pagination)"appears on my page after pagination using to display the next set of records. I know that the following situation is the cause;
  
  I have two reports on my page
  1 report that contains a query that returns a single record to view the introductory text for the report below him, the report is not all paging.
  2. report that two contains a query that returns more than one record that allows the user to use the pagination.
  
  The error message occurs in the position of a report when the user pages before information displayed initially. Anyone any ideas how can I remove this error message.
  
  Thank you
  Ben

  Hello

  Yes, the error will be triggered when a report is not sufficient documents to meet the pagination in place.

  The best thing to do would be to check the option "reset pagination for this page" on the branch that is used when the user switches reports.

  Andy

• The number of heartbeat for the host data warehouses is 0, which is less than required: 2

  Hello

  I have trouble creating my DRS cluster + storage of DRS, I have 3 hosts esxi 5.1 for the task

  First, I created the cluster, no problem with that, so the DRS storage was created and now I can see in the Summary tab

  "The number of heartbeat for the host data warehouses is 0, which is less than required: 2".

  I search the Web and there are similar problems when people has only a single data store (the one that came with ESXi) and need to add another but in my case... vcenter detects any...

  In the views of storage I see the store of data (VMFS) but for some strange reason the cluster not

  In order to achieve data warehouses minimum (2) can I create an NFS and map it in THE 3 esxi hosts? Vcenter which consider a play config?

  Thank you

  You probably only have local data warehouses, which are not that HA would require for this feature (pulsations datastore) to work properly.

  You will need either 2 iSCSI, FC 2 or 2 NFS volumes... Or a combination of the any of them, for this feature to work. If you don't want to use this feature, you can also turn it off:

  http://www.yellow-bricks.com/2012/04/05/the-number-of-vSphere-HA-heartbeat-datastores-for-this-host-is-1-which-is-less-than-required-2/

• How to count the number of Sundays between the two dates

  Hello
  
  I want the number of Sundays between the two dates
  
  example of
  
  number of number of Sundays between 4 January 2013 ' and April 30, 2013 "in a select query, I have to include this as a sub query in my select statement.

  nordine B wrote:
  Hi Frank,.
  Have 1 doubt...

  In many countries the week could me "Monday". How the application handles it?
  Or did I get something wrong?

  Help, please!

  For ' IW'(ISO week) early in the day is always Monday...

  It's so simple - calculate the weeks between two dates based on Monday... This is the number of Sundays...

  NEXT_DAY is another option...

  SQL> with dd as
    2  (
    3      select TO_DATE('01-04-2013','dd-mm-yyyy') fdt, TO_DATE('30-04-2013','dd-mm-yyyy') ldt from dual
    4  )
    5  SELECT       fdt,ldt,
    6            (next_day(ldt,'sunday')-next_day(fdt-1,'sunday'))/7 sdays
    7  FROM         dd;
  
  FDT       LDT            SDAYS
  --------- --------- ----------
  01-APR-13 30-APR-13          4
  

  Published by: JAC on May 2, 2013 12:20

• Difference in the number of records for the same date - 11 GR 2

  Guy - 11 GR on Windows2005 2, 64-bit.
  
  BILLING_RECORD_KPN_ESP - is a monthly partitioned table.
  BILLING_RECORD_IDX #DATE - is a local index on "charge_date" in the table above.
  
  SQL > select / * + index (BILLING_RECORD_KPN_ESP BILLING_RECORD_IDX #DATE) * /.
  2 (trunc (CHARGE_DATE)) CHARGE_DATE;
  3 count (1) Record_count
  4. IN "RATOR_CDR". "" BILLING_RECORD_KPN_ESP ".
  where the 5 CHARGE_DATE = January 20, 2013.
  Group 6 by trunc (CHARGE_DATE)
  5 m
  
  CHARGE_DATE RECORD_COUNT
  ------------------ ------------
  2401 20 January 13-> > some records here.
  
  -> > Here I can see only '2041' records for Jan/20. But in the query below, it shows "192610" for the same date.
  
  Why is this difference in the number of records?
  
  SQL > select / * + index (BILLING_RECORD_KPN_ESP BILLING_RECORD_IDX #DATE) * /.
  (trunc (CHARGE_DATE)) CHARGE_DATE,
  2 count (1) Record_count
  3. FOR "RATOR_CDR." "" BILLING_RECORD_KPN_ESP ".
  "4 where CHARGE_DATE > 20 January 2013."
  Group of 5 by trunc (CHARGE_DATE)
  6 order by trunc (CHARGE_DATE)
  5 m
  
  CHARGE_DATE RECORD_COUNT
  ------------------ ------------
  192610 20 January 13-> > more records here
  JANUARY 21, 13 463067
  JANUARY 22, 13 520041
  23 JANUARY 13 451212
  JANUARY 24, 13 463273
  JANUARY 25, 13 403276
  JANUARY 26, 13 112077
  27 JANUARY 13 10478
  28 JANUARY 13 39158
  
  Thank you!

  Because in the second example you also select rows that have a nonzero component.

  The first example selects only rows that are 00:00:00

  (by the way, you should ask questions like this in the forum SQL)

• You will need to add the number of days to the end date of the users.

  Hello
  I have a code where we adding the number of days (30) to the current date and update IDM DB user end date.
  Now, we have a requirement to add the number of days (30) to the existing fence of user instead of add to the current date.
  
  * public String incrementDate (int daysToAdd)
  {
  Start date
  log.info("NotifyLastDayOfService::incrementDate(): entrez»);
  SimpleDateFormat sdf = new SimpleDateFormat ("yyyy-MM-DD 00:00:00");
  Calendar c = Calendar.GetInstance ();
  c.Add (Calendar.DATE, daysToAdd); number of days to add
  String PROMOTIONDate = sdf.format (c.getTime ());
  log.info("NotifyLastDayOfService::incrementDate(): sortie»);
  return Nouvelle_date;
  }*/
  
  Have any body set up this scenario?
  Please suggest.
  
  
  Thank you
  Kalpana.

  You can try this as well

  where oimAttribute = "Users.End Date"

  public String updateOIMAttributeForDateType (String oimAttribute, Date endDate, long take, String daysToAdd)
  {
  tcUserOperationsIntf userOperationsIntf = null;
  HashMap modifyMap = new HashMap ();
  HashMap searchmap = new HashMap ();
  SimpleDateFormat formatter = new SimpleDateFormat ("yyyy-MM-DD hh: mm :"); ")
            
  try {}
  Calander cal = null;
  cal.setTime (endDate);
  Cal.Add (Calendar.DATE, Integer.parseInt (daysToAdd));
  Date Edate = cal.getTime ();

  modifyMap.put (oimAttribute, Edate);
  searchmap.put ("Users.Key", String.valueOf (take));
  userOperationsIntf = Platform.getService (tcUserOperationsIntf.class);
  tcResultSet searchset = (searchmap) userOperationsIntf.findAllUsers;
  userOperationsIntf.updateUser (searchset, modifyMap);
  return a SUCCESS;
  } catch (Exception e) {}
  If (Logger.isErrorEnabled ()) logger.error (e.getMessage ());
  error return;
  } {Finally
  try {}
  If (userOperationsIntf! = null) userOperationsIntf.close ();
  } catch (Exception e) {if (logger.isErrorEnabled ()) logger.error (e.getMessage ()) ;}}
  }

• Compare and get the number of days since the same date field

  Hello
  
  I need to get the results in days when comparing the same field, date
  
  For example,.
  
  Primary_key_field Date_field
  100000002 1 January 10
  100000004 February 1st, 10
  100000005 30 April 10
  100000006 April 18, 10
  100000007 29 April 10
  100000008 May 1st, 10
  
  extract the first two date_field records based on the primary_key_field. (January 1, 2010 and February 1, 2010) and compare and find the difference and who appear in number of days, the same fetch two disks and do the same math... How can I achieve this... is it possible to make the SQL thro? Please help me solve this problem...
  
  Thank you and best regards,
  KBG.

  This is the query using functions oracle Analytics

  Primary_key_field Date_field
  100000002 1 January 10
  100000004 February 1st, 10
  100000005 30 April 10
  100000006 April 18, 10
  100000007 29 April 10
  100000008 May 1st, 10

  Select rn, date_field, next, next - date_field "Diff".
  de)
  ROW_NUMBER() SELECT over (ORDER BY primary_key_field) rn,
  date_field, LEAD (date_field) OVER (ORDER BY date_field) next
  FROM table_name)
  /

• Why do write can not be performed because the number of data channels does not match number of channels in the task.

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of job channels: 8
  Number of data channels: 1

  Lama says:

  The DAQmx vi writing gives me the error. If I run a single channel, isn't a problem. Multichannel gives me error.

  You are funny! Why tie yourself to work VI (single channel) instead of one that gives you errors (multichannel)?

  (If your car does not work, you bring car your wives to the mechanic, right!)

  What is the exact text in the multichannel 'physical channels' when you do the AO control?

  Lama says:

  I did a sequence to ensure that each function has been run in the correct order. Wouldn't a race condition.

  All you have to do is wire the 'start of task' error at the entrance of error of the DAQ assistant and then back to 'stop task' and things will run in order. Guaranteed! Think the stream! Everything else can run in parallel or the order is irrelevant.

  First convert the sequence stacked to a sequence of plate, remove the flat sequence and add the mentioned son. Now, do a "cleaning pattern.

  A when stacked with the inhabitants of the sequence is one of the worst construction you can possibly do. It makes the code difficult to follow, impossible to maintain, difficult to debug.

• How to display the phone number with code in the text element

  Hello friends,
  
  I have table "customer_management. In this table, I have a phone number of field in the varchar2 data type.
  the storage format of the telephone number is: (code-phone number) for example 0902334-324345
  Ok. I created a form of this table in the data block. This form I want to view the phone number and code in two text elements... So, should I create a query to do this... Pls help me with a query... What trigger is suitable for it?
  Please give me example query...
  
  Thank you

  Hello
  If you are using

  :TAA_CUSTOMER_MANAGEMENT.CONTACT_PHONE_NO
  :TAA_CUSTOMER_MANAGEMENT.NUMBERS
  

  are these above said are elements not db?
  If yes then its get accessor for fill in post-interrogez trigger.
  Just check substring and instring functions that return the value.

  Published by: user13329002 on March 3, 2011 01:47

• Invalid reference to the variable 'NUMBER '.

  Hi gurus

  I understand that if someone helps me, I have the following code example.

  Code example

  SET SERVEROUTPUT ON

  DECLARE

  List_of_numbers_t TYPE TABLE IS NUMBER;

  l_numbers list_of_numbers_t: =.

  list_of_numbers_t (1,2,3);

  BEGIN

  DBMS_OUTPUT. Put_line (l_numbers (1).) (COUNT);

  END;

  Error

  Error report:

  ORA-06550: line 7, column 38:

  PLS-00487: Invalid reference to the variable 'NUMBER '.

  ORA-06550: line 7, column 3:

  PL/SQL: Statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  * Action:

  I want to check the index 1 of my collection, but I get the above error. Can someone help me to remove this error. Thank you

  Concerning

  Matt

  
  

  Hi, Matt,

  Matt. wrote:

  Hi gurus

  I understand that if someone helps me, I have the following code example.

  Code example

  SET SERVEROUTPUT ON

  DECLARE

  List_of_numbers_t TYPE TABLE IS NUMBER;

  l_numbers list_of_numbers_t: =.

  list_of_numbers_t (1,2,3);

  BEGIN

  DBMS_OUTPUT. Put_line (l_numbers (1).) (COUNT);

  END;

  Error

  Error report:

  ORA-06550: line 7, column 38:

  PLS-00487: Invalid reference to the variable 'NUMBER '.

  ORA-06550: line 7, column 3:

  PL/SQL: Statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  * Action:

  I want to check the index 1 of my collection, but I get the above error. Can someone help me to remove this error. Thank you

  Concerning

  Matt

  The collections have some counts; scalars don't.

  l_numbers is a collection, so you can see the number of items contained in it like this:

  DECLARE

  List_of_numbers_t TYPE TABLE IS NUMBER;

  l_numbers list_of_numbers_t: =.

  list_of_numbers_t (1,2,3);

  BEGIN

  DBMS_OUTPUT. Put_line (l_numbers. (COUNT);

  END;

  /

  l_numbers (1) , however, is just a scalar NUMBER, you can't use COUNT on it

  In other words, l_numbers (1) is the number 1, so we can not say

  DBMS_OUTPUT. Put_line (l_numbers. (COUNT);

  for exactly the same reason that you can't say

  DBMS_OUTPUT. Put_line (1. (COUNT);

• Number of records in the top of the report page

  Hello
  IAM trying to display the total number of records in the upper part (I have not posted in the footer) of my report classic/IR using the below javascript but somehow, is not working. I appreciate any suggestion on this subject,
  < Input id = "numrowsGet" type = "hidden" value = "" #TOTAL_ROWS # "/ >"
  < script type = "text/javascript" >
  If (document.getElementById("numrowsGet").value is "0")
  assign value to {0;
  }
  on the other
  {
  document.getElementById("P11_RECORD_COUNTS").value = document.getElementById ("numrowsGet") .value;
  }
  < /script >
  
  .. .THX

  Once the page is rendered, then you see the numrowsGet article and its value in the view source?

  Why not try this adding in the header of the region as

  Row Count: #TOTAL_ROWS#
  

  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21674/ui_region.htm#HTMDB25572

• Cannot download wild tangent games, kserver errror invalid customer request after that the virus

  DOWNLOAD PROBLEMS

  HAD PROBLEMS WITH VIRUSES... RAN ANTIVIRUS PROGRAM... NOW CANNOT DOWNLOAD MY WILD TANGENT GAMES. SAID - KSERVER ERROR INVALID CLIENT REQUEST-

  Hello susanwakeham,

  I suggest that contact the Wild Tangent games forum below to submit your question.  They would be better able to tell you why you can't connect to the server.
  http://Forum.WildGames.com/

  Thank you

  Marilyn

• The CCleaner registry cleaner reports "invalid or empty the file class."

  Original title: when using CCleaner (cleaning the registry), the only problem that arises is; 'Class file invalid or empty', how can I solve this problem?

  After using CCleaner, registry cleaner, CCleaner is displayed the following problem;

  Problem: Invalid or empty the file class

  Data:.tif\openWithProgids\MSPaper.Document

  Registry key: HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\fileExts\.tif\OpenWithProgids

  How can I solve this problem once and for all?

  When I use 'Registry Cleaner' "CCleaner" from the program for "chose to solve problems", it doesn't permanently solves the problem, as whenever I run the CCleaner program at a later date, it is here once again!

  I have the 32-bit version of Windows XP service pack 3 and Windows Explorer 8, is installed on this desktop computer.

  Please, help me to solve this problem.

  Thank you for any help you can give me!

  The problem with registry cleaners in general is that they often report "of the problems' when there is no problem.  If the user actually deletes an entry from the registry in response to such a notice, then it could well be a problem.

  Just because you have not known - again - a problem with the Ccleaner registry cleaning tool does not mean that you won't.  Because the 'cleansing' of the registry has not been shown to have an effect on the performance of the system, the risk of deleting something important makes use of stupid registry cleaners.  Read the two links in my previous post.

  As I wrote originally, the 'problem' reported by Ccleaner is probably due to his inability to properly manage the data type "REG_NONE" in the registry key.

  The way to fix this is to ignore and stop using Ccleaner registry that tells you that there is a 'problem '.

• 907 invalid cod exceeded the limit of the number of OS 5 bytes

  Hello

  I do face-down issue with jad installation from a Web server. I put all my files of cod with a jad file in our weserver. and appealed to the jad file. After a few seconds, the message as below. The same thing works with phone OS 6 version, but not with the OS 5

  907 invalid cod exceeded the limit of the number of bytes

  Thank you

  RAM

  If you are testing on simulators on the same PC running the same MDS Simulator, the article on connection limits may apply.

  Sorry beat me to it, I've never had the OS 5.0 browser throw up his hands on a download I created it, that the OS 6.0 browser was fine with.  The size of your files is not huge.

  If you really want to count the MDS Simulator out run, start the WiFi on the 5.0 OS simulator (manage connections--> set up the Wi - Fi network, you follow the nose, and then start the WiFi on the device), then change the configuration of the default browser (--> Advanced--> browser Options) in the Hotspot browser.  Stop the MDS Simulator and see if you can still browse.  Then, try the download again.

• Gets the number of records in the report based on the input of the user on the date and the number of days.

  Hello

  I need where there are quick dashboard that selects the date, second interval column consists of >, <, = and the third column is seen number (in days)

  for example, the user enters: 12 18, 2015, <, 9. here I report who should get the data (records) 9 days earlier from the date specified (from 12/10/2015 to 18/12/2015).

  Similarly for > =.

  How to get there. I'm unable to write the script and I use the column date in my report. Ask that you please advice how to solve this problem.

  Please find below the screen for reference.

  

  Kind regards

  Chandra Khalil.

  Hello

  Not exactly why you're doing the report this way. If the user must select, basically, a period of dates, would not easier to have a column of data with a between the operator and the user would select 2 dates (upper and lower intervals)?

  In any case, it is possible to achieve what you want to do as a result of your approach. You could use when's CASE and have a more complex filter, but I think that it is better to have a few nested filters where you use the range operator to determine what date filter that you use (see image below)

  

  Some notes about my filter. First of all, I am making the assumption that the operator is "=", then the number of days specified must be ignored and you just return the data for the selected date. You will notice also that in my filters, I got a cast so far, but if you are using a column that is already a timestamp so it won't be necessary.

  This should achieve what you want.

  See you soon,.

  Pedro