Number of records in the top of the report page

Similar Questions

• Gets the number of records in the report based on the input of the user on the date and the number of days.

  Hello

  I need where there are quick dashboard that selects the date, second interval column consists of >, <, = and the third column is seen number (in days)

  for example, the user enters: 12 18, 2015, <, 9. here I report who should get the data (records) 9 days earlier from the date specified (from 12/10/2015 to 18/12/2015).

  Similarly for > =.

  How to get there. I'm unable to write the script and I use the column date in my report. Ask that you please advice how to solve this problem.

  Please find below the screen for reference.

  

  Kind regards

  Chandra Khalil.

  Hello

  Not exactly why you're doing the report this way. If the user must select, basically, a period of dates, would not easier to have a column of data with a between the operator and the user would select 2 dates (upper and lower intervals)?

  In any case, it is possible to achieve what you want to do as a result of your approach. You could use when's CASE and have a more complex filter, but I think that it is better to have a few nested filters where you use the range operator to determine what date filter that you use (see image below)

  

  Some notes about my filter. First of all, I am making the assumption that the operator is "=", then the number of days specified must be ignored and you just return the data for the selected date. You will notice also that in my filters, I got a cast so far, but if you are using a column that is already a timestamp so it won't be necessary.

  This should achieve what you want.

  See you soon,.

  Pedro

• How can I recover only odd or even number of records in the table?

  Hello

  How can I recover only odd or even number of records in the table?

  Thank you
  

  Hi IndiMinds,

  Alternatively, you can use in queries. :

  Odd:

  SELECT *.

  Of

  (SELECT rownum row_count, id, name FROM bigemp

  )

  WHERE mod (row_count, 2) = 1;

  Still:

  SELECT *.

  Of

  (SELECT rownum row_count, id, name FROM bigemp

  )

  WHERE mod (row_count, 2) = 0;

  Thank you

• Number of records in the repeat region

  I have a page with a repeat region, which displays the records in Table1. Table1 is related to the Table2 (one to several, MS Access). I want to do is show the number of records in Table2 that are associated with a given row from Table1 shown in the repeat region.
  
  Think of how many responses listed next to each message in this forum, because that's basically what I do. As it is now, I get the correct number of records for the first line of Table1 shown in the repeat region, but this number is indicated in each line. In other words, if the first record displayed from Table1 has 3 matching records in table 2, 3 number in each row in the repeat region.
  
  I appreciate all the help that I'm a complete novice.
  
  

  Maybe it is not very effective, but I bet you it will do what you want:

  
  SELECT *.
  FROM table1
  ORDER BY name DESC
  

  
  SELECT *.
  FROM table2
  Where tid = #table1.id #.
  

  
  #table1.name #.
  #table1.client #.
  #table1.products #.
  $# numberformat (table1.income, '999,999.99') #.
  #table1.frequency #.
  #table2. RecordCount #.
  
  

• The previous/next Page number is showing that the current page number

  I'm trying pages numbers with previous Page number and the current Page number, then it is and shows that reason 002-003, but for some they are both appearing as the number of courses, so 003-003. The same thing happens if I try to insert the next Page number.

  I have this set up in the master page in a document issued in March and it works great - when I add new pages they are automatically numbered correctly. However, in a new document, or if I add a new text box to my old document, the Page number previous shows that the current Page number.

  Any idea of what is the cause? I use the latest InDesign on a Mac with os x 10.11.12. My colleague is having the same problem on his Windows PC.

  I am waiting to start a conversation with Technical Support, so I'll post the results.

  Hey Willi

  Thanks for your reply, we are both halfway there, it isn't fair for the lines break...

  I just checked my old document and there was a block of empty text hidden under something else on the previous page, which is linked to the image on the next page that holds page numbers. I need to insert a Page break at the beginning of the first text box to force the numbers on the following page. Now my second text box displays the previous and current page numbers.

  Problem solved!

• Error when creating new record in the jspx page.

  Hello! I have error when you try to post the new record in the jspx page (see: http://my.jetscreenshot.com/2677/20100820-oo8z-19kb)
  
  DB I trigger and in the EO primary key attribute I Type set to DBSequence.
  
  Where is the problem and what to do?
  
  Best regards, Debuger

  @Sireesha excellent point!

  @Debugger the reason why you get the error, it is you're missing an af:convertNumber, however, as said Jean Lou, why even put a DBSequence field on your screen?

  John

• Problems with sorting of columns and the number of lines in the report

  Hello
  
  I'm having a problem with sorting of columns and the number of lines displayed in a report.
  
  This report displays the data correct, but if I try to sort on a column when I click on the column heading in the report returns no line... I need to click on the "go" button to refresh the report (with the column sorted now) in to display the data.
  
  Similarly, I display only 15 lines per page. If I try to view the lines 16-30, 31-45, etc., that it returns no line until I click on the 'go' button to refresh again.
  
  Has anyone else had (and overcome) the same problem?
  
  Thank you
  
  Joseph

  Joseph,

  2 questions:

  1) are you using the elements referenced by the report page to filter etc.. ? If so, you're failing values of these when the loading of the page?
  (2) are you using PPR page through the results?

  If so, it could be a problem with the different types of session state, as Anton Nielsen blogged about here:
  http://c2anton.blogspot.com/2008/12/Oracle-Application-Express-Apex-three.html

  If so, you can use calculations or processes to set element values in session state persistent during page rendering, as Anton mentions. In this way, when you use PPR page values will be available in session state and your report should work fine.

  Anthony.

• Linking the chart to the report page

  Hello everyone,

  I have a pie chart that shows the items according to their category. For example: how many elements we have in Category1, Category2,... What I would like to make relates to the pie chart to the report page that displays items in this particular category. I have a report page that displays all the items, but I want when user clicks on the category of the card, he orders him to this particular category. Please notify.

  Thank you

  Hello

  Change your where clause to

  where)

  InStr (upper ('CATEGORY'), superior (nvl (: P18_CATEGORY, 'CATEGORY'))) > 0

  )

  Gus

• difference in number of records in the table of audit

  Hi all

  We strive to remove lines of verification based on timestamp(sysdate-30) table(sys.aud$). The command I used below.

  SQL > set lines 200

  COL OWNER FORMAT A15

  Select TABLE_NAME, nom_tablespace, OWNER, num_rows, STATUS, DEGREE, TABLE_LOCK, LAST_ANALYZED, PARTITIONED, USER_STATS from dba_tables where TABLE_NAME = '& TABLE_NAME';

  SQL > SQL > type table_name value: AUD$

  OWNER, TABLE_NAME, NUM_ROWS STATUS DEGREE TABLE_LO LAST_ANALY BY USING NOM_TABLESPACE

  --------------- ------------------------------ ------------------------------ ---------- -------- ---------- -------- ---------- --- ---

  SYS AUD$ 934991 SYSTEM VALID ACTIVE 1 08/07/2012 No. No.

  SQL > delete / * + parallel (aud$ 8) * / of sys.aud$ where NTIMESTAMP # < sysdate-30; (I don't know why I put NTIMESTAMP #, although I see # aud TIMESTAMP column $ table, the above query, I got from sr dba)

  3140994 deleted rows. (reason why so many records have been deleted I see 934991 lines from dba_tables view)

  
  

  After that I saw the difference in number of records.

  
  

  SQL > select / * + parallel (aud$ 8) * / count (*) from sys.aud$ where TIMESTAMP # < sysdate-30;

  COUNT (*)

  ----------

  0

  SQL > select / * + parallel (aud$ 8) * / count (*) from sys.aud$ where NTIMESTAMP # < sysdate-30; -> Why there are differences in the number of records if I put NTIMESTAMP #in query)

  
  

  COUNT (*)

  ----------

  50

  Thank you

  Bhavani.

  SQL > SELECT count (*) from sys.aud$ where ntimestamp #.<>

  COUNT (*)
  ----------
  0

  Try this one.  Good luck.

• Number of records in the interval of 30 minutes.

  Hi all

  I'm trying to find the number of records in 30-minute intervals. Having said that, I am discovering many records I get in 30 minutes. In my table, I have a column called 'Last_UPDATE_DATE' with the date and time. Can someone help me, ways to achieve. I tried to think about how to get, but do not get the required information.

  Hello

  as Pablolee suggested, it is not easy to understand without examples of data.

  Here's a possible solution:

  with timeranges as

  (

  Select trunc (sysdate) +(level-1) *(30/24/60) starttime

  trunc (sysdate) + (level) *(30/24/60) endtime

  from dual connect by level<=>

  )

  Select b.starttime, count (*)

  from yourtable one

  Join timeranges b

  on (a.last_update_date > = b.starttime and a.last_update_date)<>

  B.starttime group;

  If it does not match your need please post some sample data (check the Re: 2. How can I ask a question on the forums?)

  and validate the information to reproduce your case.

  Kind regards.

  Alberto

• by comparing the number of records in the table child

  I have 3 tables below:
  
  Table 1 - Parent Table
  Table table2 child - who has the number of records for each record in Table1 (row_id in Table1 corresponds to par_row_id in Table2)
  Child table table 3 - has that number of records for each record in Table1 (row_id in Table1 corresponds to par_row_id in table 3)
  
  I would like to run an Oracle SQL query to identify all the separate row_id on Table1, for which the number of child records in Table2 does not match the number of child records in Table3
  
  I ask for help to identify the best way to identify these records in the parent table. If possible an example too, please.
  
  Thank you
  
  Published by: cseshan on February 3, 2013 01:35

  All by adding the simplest example (with the sample data that you were supposed to provide) below

  create table table1(row_id number primary key);
  
  create table table2(par_row_id number references table1);
  
  create table table3(par_row_id number references table1);
  
  insert into table1 values(1);
  insert into table2 values(1);
  insert into table3 values(1);
  
  insert into table1 values(2);
  insert into table2 values(2);
  insert into table2 values(2);
  
  insert into table1 values(3);
  insert into table3 values(3);
  insert into table3 values(3);
  
  insert into table1 values(4);
  insert into table2 values(4);
  insert into table2 values(4);
  insert into table2 values(4);
  insert into table3 values(4);
  insert into table3 values(4);
  
  commit;
  
  with child1_cnt as
  (
    select par_row_id,count(*) cnt
    from table2
    group by par_row_id
  ),
  child2_cnt as
  (
    select par_row_id,count(*) cnt
    from table3
    group by par_row_id
  ),
  all_counts as
  (
    select p.row_id,nvl(c1.cnt,0) c1_cnt,nvl(c2.cnt,0) c2_cnt
    from table1 p
     left outer join child1_cnt c1
       on ( p.row_id = c1.par_row_id )
     left outer join child2_cnt c2
       on ( p.row_id = c2.par_row_id )
  )
  select row_id,c1_cnt,c2_cnt
  from all_counts
  where c1_cnt != c2_cnt;
  
  ROW_ID C1_CNT C2_CNT
  ------ ------ ------
       2      2      0
       4      3      2
       3      0      2 
  

• Difference in the number of records for the same date - 11 GR 2

  Guy - 11 GR on Windows2005 2, 64-bit.
  
  BILLING_RECORD_KPN_ESP - is a monthly partitioned table.
  BILLING_RECORD_IDX #DATE - is a local index on "charge_date" in the table above.
  
  SQL > select / * + index (BILLING_RECORD_KPN_ESP BILLING_RECORD_IDX #DATE) * /.
  2 (trunc (CHARGE_DATE)) CHARGE_DATE;
  3 count (1) Record_count
  4. IN "RATOR_CDR". "" BILLING_RECORD_KPN_ESP ".
  where the 5 CHARGE_DATE = January 20, 2013.
  Group 6 by trunc (CHARGE_DATE)
  5 m
  
  CHARGE_DATE RECORD_COUNT
  ------------------ ------------
  2401 20 January 13-> > some records here.
  
  -> > Here I can see only '2041' records for Jan/20. But in the query below, it shows "192610" for the same date.
  
  Why is this difference in the number of records?
  
  SQL > select / * + index (BILLING_RECORD_KPN_ESP BILLING_RECORD_IDX #DATE) * /.
  (trunc (CHARGE_DATE)) CHARGE_DATE,
  2 count (1) Record_count
  3. FOR "RATOR_CDR." "" BILLING_RECORD_KPN_ESP ".
  "4 where CHARGE_DATE > 20 January 2013."
  Group of 5 by trunc (CHARGE_DATE)
  6 order by trunc (CHARGE_DATE)
  5 m
  
  CHARGE_DATE RECORD_COUNT
  ------------------ ------------
  192610 20 January 13-> > more records here
  JANUARY 21, 13 463067
  JANUARY 22, 13 520041
  23 JANUARY 13 451212
  JANUARY 24, 13 463273
  JANUARY 25, 13 403276
  JANUARY 26, 13 112077
  27 JANUARY 13 10478
  28 JANUARY 13 39158
  
  Thank you!

  Because in the second example you also select rows that have a nonzero component.

  The first example selects only rows that are 00:00:00

  (by the way, you should ask questions like this in the forum SQL)

• Get number of records in the date range - IDE: PLSQL Developer

  I want to count the number of records of members who register within a date range specified, based on effective and expiration dates and their "elg_code". I posted the SQL code for some examples of data. What I would like to see returned is in three columns of the counties where the eff_date date_exp members fall within the date range specified by the SQL and have an Elg_code of ' ' (space).
  
  So what I would like is all members with elg_code ' ' where he eff_dt and exp_dt range is April 2012, 2012 MAY & JUN 2012. Thus, according to data from the sample I posted, Mark, where his elg_code record is ' ', his eff_dt is 01/01/2011 and April 2012 (30/04/2012) is his exp_dt. Range of the brand statement may 2012, but not MAY or JUNE of 2012. Marty would tally for the APR and MAY because his eff_dt is before MAY 2012 and his exp to MAY 2012. etc...
  
  According to the data below, the results should resemble:
  
  APR MAY JUN
  4-3-2
  
  APR should have FRANK, MARK, MARTY, MARY.
  MAY should have FRANK, MARTY, MARY
  JUN should have FRANK and MARIE
  
  NOAM and JOHN should not appear as his records with elg_code ' ' have no documents eff_dt and exp_dt which are April-June 2012.
  
  So what I tried without success as it appears that I have a kind of Cartesian question (?), is:
  
  Select count (m1.mbr_name) APR,
  Count (m2.mbr_name) MAY,
  Count (m3.mbr_name) JUN
  mbr2 M1,
  mbr2 m2,
  mbr2 m3
  "where m1.eff_dt < ' 01 - may - 2012"
  "and m1.exp_dt > ' 01-Apr-2012.
  and m1.elg_code = ' '
  "and m2.eff_dt < 1 June 2012"
  "and m2.exp_dt > ' 01 - may - 2012"
  and m2.elg_code = ' '
  "and m3.eff_dt < 1 July 2012"
  "and m3.exp_dt > 1 June 2012"
  and m3.elg_code = ' '
  
  
  Here's the DML
  
  Thanks for any help!
  
  
  create table mbr2 (mbr_name varchar (10), varchar (1) grpid eff_dt date, date of exp_dt elg_code varchar (1))
  Commit
  
  insert into mbr2 values ('BRAND', 'A', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (April 30, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('BRAND', 'A', to_date (May 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), 'C')
  
  insert into mbr2 values ('MARTY', 'A', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (May 31, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('MARTY', 'A', to_date (June 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), 'C')
  
  insert into mbr2 values ('FRANK', 'B', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (June 30, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('FRANK', 'B', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY ""), 'C')
  
  insert into mbr2 values ('MARY', 'B', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (June 30, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('MARY', 'B', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY ""), 'C')
  
  insert into mbr2 values ('JOHN', 'C', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (July 1, 2011 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('JOHN', 'C', to_date (July 1, 2011 ',' DD-MM-YYYY '), to_date (1 January 2012 ',' DD-MM-YYYY ""), 'C')
  
  insert into mbr2 values ("NOAM" 'd', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), ' ' ")
  
  Commit

  This gives you a report for the current month and the two front. Column header must be adjusted ;-)

  select
    count(
    case
    when
      eff_dt < add_months(trunc(sysdate,'MM'), -1)
      and
      exp_dt >= add_months(trunc(sysdate,'MM'), -2)
    then 1
    end) April
  , count(
    case
    when
      eff_dt < add_months(trunc(sysdate,'MM'), 0)
      and
      exp_dt >= add_months(trunc(sysdate,'MM'), -1)
    then 1
    end) May
  , count(
    case
    when
      eff_dt < add_months(trunc(sysdate,'MM'), 1)
      and
      exp_dt >= add_months(trunc(sysdate,'MM'), 0)
    then 1
    end) June
  from mbr2
  where
  elg_code = ' '
  and
  eff_dt < add_months(trunc(sysdate,'MM'), 1)
  and
  exp_dt >= add_months(trunc(sysdate,'MM'), -2)
  
  APRIL     MAY     JUNE
  4     3     2
  

• Total number of records in the table read

  Here is the procedure to read total no of record in the table specified by the user during execution. But it still gives the same answer for all the table. Can someone help me?
  
  create or replace procedure p3 (varchar2, not on the number tab)
  as
  Start
  Select count (*) from no tab;
  end;

  You need dynamic SQL statements.

  Or:
  http://laurentschneider.com/wordpress/2007/04/how-do-i-store-the-counts-of-all-tables.html
  To get the name of the Table and no lines
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:1725645184471282:P11_QUESTION_ID:1660875645686

  Or simply use the data dictionary, collect statistics of the table, then:
  Select table_name, num_rows from user_tables;

• Limit the number of records in the PivotTable

  Hello
  
  How can I display only first 10 runners in a custom report?
  
  Thank you.

  Hi Luis Simioni

  It is very very very simple.
  Select the State of the active or active history
  Include columns, the name of the account, active, quantity and once again the amount.
  In the fourth column of quantity, please apply the formula (partially fx) RANK ('-quantity "." ") Quantity per account. The account name')
  After the application of the formula, you select the filter lower at 11.
  You can hide the fourth column.

  The RANK function would rank each asset based on their quantity. We apply the sentence per account. "" Account name " while the ranking is done separately for each account name. We then apply the filter under 11, while only 10 records are displayed in the report.

  Once the number of records is limited, then you can apply the pivot accordingly and get the result.

  Let me know if you are still facing problems.
  You can send me to [email protected] for any question.

  Kind regards

  Paul

  Published by: Paul-CRMIT May 19, 2011 11:17