Report of the font?

Similar Questions

• Interactive report - changing the font color of column.

  What would be the best way to change the color of the font color (data) in the interactive report without changing the model?
  
  Thank you
  
  Robert

  Then the best way is to use css as mentioned by Paul here {: identifier of the thread = 2397346}

• Set the font size in the generation of explicit report using a model

  Does anyone know how to set the font size using the generation of explicit report with MS Word?  I have trouble getting my 11th column to fit the correct size with the imported data table.  The values end up being off the screen.  Any ideas?

  I suspect that the answer is somewhere within MS Word instead of LabVIEW.  However, I tried it figure out in both and had no luck.  In WORD, I updated all fonts size = 10.  However, the table is imported to the format = 12.  In addition, the table cells are the same size, regardless of the number of columns is imported.

  David

  Just for future visitors to this question are aware, it is a known problem with the generation of report express vi.  There is no solution at this time and the problem will be resolved in future versions of LabVIEW.

• Change the font color in a report using SQL for APEX 5.0 queries

  Hello

  I'm testing APEX 5.0 in my test environment to see if I can migrate my internal applications of 4.2 to 5.0.

  How can I change the font color in a field based the SQL query? I know how to do it in 4.2, but I can't find the same in 5.0.

  Thank you

  Well, I used to put html tags in the select text, getting the value of depending on the CASE, so I had to change the display column attribute in the report as "Display in text form (space special characters...)".

  I found an old post here: https://tylermuth.wordpress.com/2007/12/01/conditional-column-formatting-in-apex/ and this method still worked for me in APEX 5.0

  Thanks anyway

• The font size in the Standard report

  I've looked everywhere in the forum over the last three days at least to learn how to simply change the font size of the data in a standard report.  Nothing works. I have a lot of parts on a form page. I've done some parts read-only, and where necessary took some of the elements of a region read-only. We have no BI Publisher (nor the company, I work to buy it) and this is my way to allow the user to print it. Must I increase the font size for the reports on the page. I don't know that all of your answers are correct; I'm simply not being implemented properly.

  My apologies: I tried to format the raw underside like html and syntax highlighting > plain - which does not seem to be clean. The additional lines of < span > < span >... are added and when I add ECMA as above is my opinion superimposed on itself - so I removed the formatting.

  
  Here is what I tried:

  This added to my page template and page header
  < style >
  .t12standard tr td {make-size: 16px ;}}
  < / style >

  In a column in the report, change the HTML Expression to
  & lt; span style = "do-family: Times New Roman;" font-size: 110% "& gt;" #MY_COLUMN_NAME # & lt; / span & gt;

  This added to the attributes of the element field in the column attributes section
  < a style = "make-weight: bold;" font-size: 16px; "color: black".

  It seems that it should be so simple, but jeeezumcrow I'm frustrated!

  
  As always, thanks in advance for your answer!

  Alexandra

  Request Express 4.2.2.00.11

  Jeeeezum crow:

  #ISO_NUMBER #.

  That's all that I needed.
  Detective Conan.

  Nice to see you, Tony.

  Thanks for all your time.

  A

• Change the font color in a report by using the SQL query

  Hello
  
  I'm changing the font color based using a BOX the query in the form below:
  

  select "ORDER_ID", 
  "ORDER_REFERENCE",
  "ORDER_DATE",
  "ORDER_SOURCE",
  "TOTAL_DISCOUNT",
  "DELIVERY_TYPE",
  "PICKUP_DATE",
  case
       when order_status = 1 then '<font color="red">'|| order_status||'</font>'
       else
       '<font color="blue">'||order_status||'</font>'
  end order_staus,
  "DELIVERY_STATUS",
  "USER_ID",
  "CUSTOMER_ID",
  "SITE_ID"
  from "ORDERS" 
   

  I can get this working by selecting the Standard report column in the type of the column header . However this to say that I can't use the LOV LOV options involve removing the HTML characters.
  
  Is there a way I can conditionally change the font with the above query and use LOV as well? Thank you.
  
  Environment
  
  Apex 4.1.1 to apex.oracle.com
  Theme 13
  
  Published by: taepodong on June 3, 2012 07:28

  I'm sure that not looking the application form first before posting this question.

  Your solution would be:
  Please edit your report column under > report attributes > and select the property view as as a Standard report column

• Can I change the fonts of a usual report?

  Hello world
  I need to change the font of a usual report to a non-proportional font to show graphically duration event (sort of Gantt chart).
  Is it possible to change just out of column fonts? (no question about headers)
  
  Thank you very much in advance
  Oscar

  Hello

  If your report model is standard, you can set this in the HTML page header

  Change the fonts that you want to use

  Example here
  http://Apex.Oracle.com/pls/OTN/f?p=27625:2

  Could also contribute to
  http://www.w3schools.com/CSS/css_font.asp

  BR, Jari

• How integrate Times New Roman when the font properties tab real police say is Times-Roman. I run a Pitstop preflight and reports of that Times New Roman is not incorporated

  

  Assuming you are using Acrobat Pro, you can use Acrobat Preflight or Pitstop to incorporate fonts assuming you have the fonts Times New Roman installed on your system.

  -Dov

• Firefox does not render the fonts on some pages how it should

  On some Web pages (google and facebook), the fonts are not displayed correctly. See screenshot for example.

  GFX.use_text_smoothing_setting setting to true did not work;
  affecting false to ayers.offmainthreadcomposition.enabled did not work;
  tell - or enabling hardware acceleration did not work.

  I have cleartype smoothing on windows vista and only firefox has a problem.

  Help, please
  Thank you

  There has been problems reported on Windows Vista with the Microsoft Update kb3013455.
  Microsoft has released an update to solve these problems.

  MS15-010: Description of the update of the Windows kernel mode driver safety: 10 February 2015:

  • https://support.Microsoft.com/kb/3013455

  Difficulty for the degradation of quality text after security update 3013455 (MS15-010):

  • http://Support2.Microsoft.com/kb/3037639

• possible to change the font size of the bookmark toolsbar?

  possible to change the font size of the bookmark toolsbar?
  upgrade to firefox v22 and notice this bookmark toolsbar got bigger, some bookmark font cannot be displayed, it is normal? possible to change?

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution.
  You can adjust the resolution of your screen.
  To change it follow these steps:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.

• Reset of the police, while changing the font size.

  Hi all

  When designing reports using 11 g, the police of the controls changes when you change the font size. The name of the font displayed in the upper corner and property pellets won't change, but the font change happening. How can we get rid of this?

  Thanks in advance,

  Vishnu.

  Dear Vishnu.,.

  Try changing the size of the police first and then change the name. Sometimes we reports 6i.

  Manu.

• Why the font sizes are so limited in the E10 Editor?

  No one knows why the font size is limited to 26pt in the enamel of the E10 and editor of landing pages? I have this record on the exchange of ideas, but hope someone can explain the reason for the limitation.

  Thank you

  Krista

  In the exchange of ideas, it seems that this feature will be available soon!

  Mark Guth commented: "very large text sizes can report spam filters so be careful." I would like to see the ability to change to 11px instead of only 10 and 12, but without having to display html and change in the code. "- so I guess I just answered my own question.

  Has anyone actually met any problems with anti-spam filters when using large font sizes?

• How do I know if all the fonts are missing after packing?

  Hello

  Last week, I packed my InDesign files and sent to the printer, and he reported that he was missing a few fonts.

  I found the fonts (it seems that I have about three files of fonts, to various libraries, including, moreover, a folder of fonts in my InDesign file which did not have a single melting inside!) and sent to them and that was very good.  Re-packed and it seems another two fonts are "missing".  Well I found them too in a Microsoft folder (also in Office for Mac 2015)... so that's very good.  But my question is this:

  When I packed up the last time, I checked carefully to see if there is any lack of links, or any other problem.  And I didn't say that there is something to all the missing.  "0 errors", is what he says.  It is only when the printer got the files that he has noticed.

  Is there a way for me to know, before you send the files packaged, anything missing?

  Thanks for any help,

  Malcolm

  If you use InDesign CC and the printer has a copy of InDesign CC, they can load the Typekit fonts that you use on their copy.

  However, no doubt they are just using this version as a backup, and if your PDF has been successfully created, they will print from that.

• How can I enlarge the fonts on my notes I have on the paper... the words are gradually [iOS]

  How can I make my notes on the largest document?

  Hello

  Currently, mobile applications of Acrobat Reader (for iOS, Android, Windows Phone) don't have an option to change the font size for Sticky Notes.  Sorry for the inconvenience.

  You want to submit a feature request?

  Adobe - feature request/Bug Report Form

  Our product management team will take your request into consideration for a future release.

  Thank you.

• Captivate quiz - adding an additional field to report on the LMS

  I have a Captivate 100 question quiz to report to an LMS.  We can get all the information with a report of interactions between all.  The contractor giving the test wants to be able to refer to the section of a manual which the questions come from. The only way I was able to do this so far is to put the mention of the issue at the end of the issue, and then change the font to white color.  And then it appears on the report of the LMS.  Is it possible to add another field or something that will also be visible on the report of the LMS, but is not visible to the person who takes the quiz?

  There is currently a bug in Captivate 7 (maybe even in 6) which causes this problem where an interaction also ID change the slide following, as well. If all goes well, that will be corrected in version 8.  But in the meantime, you just go down the list of the IDS of Interaction and make sure they are all unique, that otherwise you will get error messages.  I use the function of Interaction ID prefix in Quiz settings do to precede rights holders Captivate unique number to each question in the quiz.  The prefix that I use is a code which clearly indicates which module this quiz question comes.  But you can go further and indicate what the question is about whether you want.