s and p the key doesn't work is not on the keyboard

Similar Questions

• ThinkPad Yoga - Backspace, Windows, shift, T, Y, tab, [---], Capslock key doesn't work do not

  I had my TPY for a little more than a year without any problems, but today, I lost the ability to use the following keys:

  BACKSPACE, Windows, offset to the left, T, Y, tab, Capslock, [---]

  In addition to the function keys. Using the on-screen keyboard or external keyboard usb works fine. I'm unable to use the tab to the BIOS screen key, so it seems to be a hardware problem. This seems to be a common problem for these keys especially for the various models from Lenovo and even some Dells. I tried to reinstall the drivers for the keyboard as suggested in other posts, and I tried to replace the keyboard connection according to this video:

  https://www.YouTube.com/watch?v=PxHKvpI8Wvc

  I bought this unit from the MS store with only a 1 year warranty (which is now in place), so I don't know what to do. I can try to replace the keyboard, but it seems that others have had only limited with replacement success. Everyone has dealt with this problem?

  Update for everyone running into the same problem:

  I ordered a replacement off of eBay keyboard and manuals for replacement of material allowing to disassemble my TPY and switch the keyboard online. Everything works again as usual!

• Enter key doesn't work is not for the pop-up screen

  Hello

  I am facing a problem in trying to close the context menu in my application. The enter (return) key does not work on my popup screen. I can close the popup with button screen central trackball or with the pointer of the mouse (in Simulator 9800). I want to close the same screen by using the Enter key. I develop application for Blackberry 9800 with OS 6.0 and also the part of the code I am using is as

  PopupScreen messageScreen = new PopupScreen(new VerticalFieldManager(VerticalFieldManager.VERTICAL_SCROLL)); messageField=new BasicEditField("Message:","Abc",20,Field.READONLY);
  closeButton=new ButtonField("Close", Field.USE_ALL_WIDTH){
    protected boolean navigationClick(int status, int time) {
      getScreen().deleteRange(0, getScreen().getFieldCount()-1);
      UiApplication.getUiApplication().popScreen(getScreen());                return true;
    }
  };messageScreen.add(messageField);
  messageScreen.add(closeButton);
  UiApplication.getUiApplication().pushScreen(messageScreen);
  

  Someone help me please on this issue.

  Thanks in advance

  Hi paabs,

  Here's what you need to do:

  1. create a function for each of your buttons. For example: okClicked() & cancelClicked().

  2. replace keyDown and check if the key pressed is the Enter key. If so, check the field with the focus and activate the correct function.

  3 replace the method "navigationClick. Locate the field with the update and select the correct function.

  E.

• BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!

  I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It does not correctly read the keys and is to register them as another key! Help pleaaase!

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• Caps lock key doesn't work does not correctly. New computer.

  My shift key does not work correctly. Sometimes it works, sometimes it doesn't. I push on it is difficult to ensure that it works. But used in a standard keyboard, it is a problem because I don't bang the keys. I have to keep retype phrases due to errors that it creates.

  Its a shame because my computer is new. In fact, within a month, it is the second time I have to look at the service center. First time because the memory of my computer showed I consumed 40 GB without even having saved/downloaded a single file/document. The repair center did not have an answer and reformat the computer. This problem has been resolved.

  Was so much happier with my Dell computer. Nothing fancy, but no problem.

  I have the same problem. the button is enabled as soon as the second or even third. you don't want to, but you have to take it back in service. Maybe it's a factory default.

• Equium A300D Multimemedia keys doesn't work does not correctly...

  Basically, I had the laptop for about 4 months and for a period of time sensitive multimedia keys in the upper part of the keyboard lost their illumination, and whenever I tried to press the one who was supposed to enlighten them, he just cut my volume: S

  Now, they are light up again, (did himself when I rebooted once) but mutes still key illumination and the ("Fn" + F number) function keys don't seem to work. for example - disable control mousepad on FN + F9 and light control on FN + F2.

  Anyone got any solutions?
  If I have to re - install drivers can someone tell me what one I should look for, because it doesn't seem to be a "multimedia keys' one.

  Hello

  I m not very well, but I recommend to reinstall the Toshiba value added Package.
  We must first remove the old VAP and after restarting again install the value-added Package downloaded from the page of European driver of Toshiba.

  Welcome them

• Ctrl key doesn't work does not correctly

  Hello

  I have a HP Pavilion 17-e031sa laptop bought only 2 weeks ago running Windows 8.  The CTRL key does not work as it should.  In general, I would like to use it with the left button of the mouse to select non-consecutive items for the copy, but this won't work for this function.  It doesn't seem to be the key itself, because it does not work in the combination of keys ctrl/alt/delete.  I tried to uninstall the keyboard driver and restart, but without success.  Any help would be appreciated.

  Hi riggy69,

  Sorry for the confusion, I knew that these keys would not do the function you're looking for. I wanted to know if these shortcuts worked using the CTRL key. So we can see if it works this particular function or all keys ctrl shortcuts work. Quick access keys did what they were supposed to do? For example, the Ctrl + X cut the selected text, or Ctrl-Esc opens the start menu?

  Trying to see if there something wrong with the key itself or is someone wrong with this particular feature you try.

  Thank you

• Qosmio G20 - touch keys doesn't work does not correctly

  Hello

  My brightness keys and all the others do not work properly. Sometimes they don´r work, sometimes they work fine.
  I ve serached for all the drivers for that matter but I found can´t it... any toughts?

  Thank you

  Are you using the original Toshiba OS, you got with your laptop?
  I think it must be Media Center, Windows XP Home Edition, right?

• FN key doesn't work is not Windows XP - Satellite L305-S5885

  Hello, I recently downgraded my Toshiba Satellite L305 S5885 from Vista to Windows XP. Everything works well except the function (Fn) keys to control the screen brightness, volume. Some function as mute but most do nothing when I try to use them. All the installed drivers although Device Manager shows errors or lack nothing.

  I tried to install all the drivers for the keyboard, the Fn keys, keyboard shortcuts, and still I can't work at all. Someone was able to get these keys to run after the installation of WinXP or you know what drivers/software I'm missing? These keys can be used in XP or they work only in Vista?

  Thank you.

  This feature has nothing to do with the operating system or Device Manager. FN keys feature Toshiba use for years and in my opinion, it will be used in the future also.

  As I see you probably have US laptop model. I put t know how he works in the United States, but here in Europe Toshiba offered special WXP BIOS update. After installing this BIOS the FN keys work correctly.

  In order to check it please US Toshiba support site under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp to see what is available for Windows XP Home edition. I also recommend you check the section ask Iris. Maybe you can find useful newsletters.

  One last thing: under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 you will find the forum we Toshiba. There, I hope that you will find answer to your question.

  Good luck and please let us know if you set up Windows XP Home edition successfully.

• Satellite A300 - FN key doesn't work is not in Windows 7

  I just upgraded my laptop Windows 7 64 bit.
  Since I upgraded the keys FN "F1 - F12" did not work, light on the keyboard lights up when I press the 'FN' key so the button seems to work and the front NATIONAL arow and keys still work but not the keys "F1 - F12.

  Anyone know how to fix this?

  Hello

  Have you installed the package of value added?
  If this isn't it!

  In addition, you should check if the Flash from Toshiba card utility is enabled/activated.
  You can check this in Programs\Toshiba\ Flash Card Utility

  Check it!

• Function - Fxx keys doesn't work does not correctly (dv7-6052er)

  When I press f12 my wifi possible turns (should be fn + f12)

  When I press fn + f12 it recognizes f12 (should be f12)

  even with all the other f keys.

  W7 HP 64.

  In addition, the touchpad only turns off when I double tap it

  Hello:

  Action keys are custom actions that are assigned to specific keys in the upper part of the keyboard.

  The main feature of the action is enabled in the factory. You can disable this feature in the configuration utility. If this feature is disabled in the configuration utility, you will need to press

  FN and a button to activate the assigned function.

  To disable the mode keys:

  1. Turn on the computer and immediately press the F10 key to display the configuration utility.

• Enter key doesn't work does not correctly.

  Original title: Learn MORE (Intermittent) key problem when I press ENTER, the order not accepted. I get a yellow star with a red outline

  This happens often when I try to access a screen prompt. (Accept, yes etc..)

  Hi Fred,

  To provide the proper resolution, I would need more information on your side.

  1. What is the number of brand and model of the computer?

  2. do you get an error and the yellow star?

  3. did you of recent changes on the computer before this problem?

  This problem can occur because settings incorrect device, the missing updates, damaged or incompatible drivers and because of hardware problems.

  Method 1:
  I suggest you to check whether or not you are faced with the same question on the on-screen keyboard.

  Type without using the keyboard (on-screen keyboard)
  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  In addition to providing screenshot of the issue so that we better understand the issue and provide measures to solve the problem.

  Check out the link to find out how to post a screenshot:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Cats 1-1 and Skype group chat doesn't work do not

  I upgraded Skype since Friday and then none of group cats, that I already have updated and I can't send a message in them. I've also added to groups by other contacts while on a call to them, and the group is created, but it shows as a group of "Untitled" with 0 participants on my screen and no video or mic.

  In addition to this, when I'm on the Cat 1-1 some of my posts don't send not the contact will go into offline mode and 1 minute later, they come online and sends the message. I thought that this could well be the first contact, but happened to 4 or 5 people I speak now.

  I use Skype version 7.21.0.100

  The first three lines of /dumpmsnp are:

  MSNP: Connection data (MSNP24):
  * Status: NetStateDisconnected
  * Current server: s.gateway.messenger.live.com
  * Server registered: s.gateway.messenger.live.com

  Please can anyone help with a solution to these problems?

  Restart your computer in Safe Mode with network and then try to start Skype.

• F4 key doesn't work does not after El Capitan upgraded for my MacBook Pro. Used to be the date and time. Anyone know where to find it now?

  When I upgraded my MacBook Pro to El Capitan, the F4 key that allows to display the date, time and calendar has stopped working. Anyone know if this is not supposed to want to work more? Or how I can quickly display the date and time as I'm used to using the F4 function key?

  On my Mac running 10.11.2 which brings to the top of the dashboard. I think that there are now three different ways to make in the face of dashboard elements, which seem completely obscure to me. I just set mine to do what he did originally come in an overlay with the widgets running.

  Look in System Preferences > Mission Control...

  to halfway to the bottom of the box:

  Dashboard: {as overlay, like space, Off}

• Windows product key doesn't work is not for the reinstallation of Windows 7

  So my Lenovo (B560) became super slow and I want to wipe the hard drive and reinstall Windows 7. But when I looked on the Microsoft Web site and tried to check my key I received the following message is displayed:

  "The product key you have entered seems to be the software that was preinstalled by the manufacturer of the device. Contact the manufacturer of the device for software recovery options.

  The product key that I used was the COA sticker under the laptop which was indeed different from one I receovered from the register. In any case, I tried both and none worked.

  Ideas for how can I proceed?

  You must install OEM Lenovo recovery disks or a recovery partition to use the key.