Report plugin: chose ATML 2.02 want to create 2 files.

I place the results of configure to create reports 2, both are ATML 2.02 and Unique file name is enabled.  If the directory does not exist, it is created, but only 1 file is generated.  If the directory already exists, 2 files are created with the second file having annexed 001.  Why it only create the second file if the directory exists before the test?

I need to duplicate the file and it seems to be the easiest way, but prefer the file in a different directory.


Tags: NI Software

Similar Questions

  • I want to create new files every 2 seconds of "write in a measurement file.

    I am a beginner of LabVIEW; I want to create new files (with similar names like test_01.txt, test_02.txt...) to 2 seconds interval using "write to a measurement file.

    In fact, it should be a question. Join the program that you have problems with. The subject was discussed several times as you should have found examples when you did your research.

  • I want to create a file as in the documents folder.

    I want to create a file as in the documents folder. I do dog trainning and have lesson plans, I would like to keep in a folder in my document. I'm going upstairs with several so I want to be grouped. I'm what some mute computer but I follow directions. Laughing out loud

    Thank you

    Angela

    angelwings1956 wrote:
    > I want to create a file as in the documents folder. I have dog trainning and
    > have lesson plans, I would like to keep in a folder in my document. I'm going upstairs
    > with several so I want to be grouped. I am some what
    > stupid computer, but I follow directions well. Laughing out loud
    >
    > Thank you,
    >
    > Angela
    >
     
     
    Open Documents, right-click in the empty area of the preview pane and
    Select "New > file.» Name the new folder as you wish.
     
     
    --
     
    Bruce Chambers
     
    Help us help you:
    http://www.CatB.org/~ESR/FAQs/smart-questions.html
     
    http://support.Microsoft.com/default.aspx/KB/555375
     
    They who can give up liberty for a little temporary
    safety deserve neither liberty nor safety. ~ Benjamin Franklin
     
    A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell
     
    The philosopher never killed the priests, while the priest was
    has killed a large number of philosophers.
    ~ Denis Diderot
     

  • I've already paid for the subscription, but now want to create pdf files

    I paid for one month subscription Adobe to create pdf files.

    But every time I have to try and create a pdf file, the screen will return to the payment page.

    My subscription has been recognized? How should I proceed?

    Hi hamishwm,

    Have you received your verification email and click the link in that email to verify your account? If you have not received this e-mail in your main Inbox, check your Junk folder please.

    If you have checked and still get the Subscribe page, it is likely that you just didn't connect to the service again. Go to http://cloud.acrobat.com and sign in with your Adobe ID and password. Once you have logged in, you should be able to convert files!

    Please let us know how it goes.

    Best,

    Sara

  • want to create Searchbar on SQL report

    Hi evryone...
    I had created SQL report in my application... But I coould nt find option of bar of serch who create generally with interactive report... so if I want to create serchbar in my SQL report so how could I able to do this thing?

    Thanks in advance

    Rommy

    Hi Rommy,

    Take a look at my first post in this thread: Re: option search for a page of REPORT FORM AND.

    Concerning

    Andy

  • I want to create a restore disk system on another HDD without having to back up the entire computer?

    I have Windows XP Professional, and I do a back up of all the windows files that I need to run windows (I hope) on a second hard drive. I want to create a file recovery from windows on this drive, but when I go in the options backup, I have to pick up the entire computer in order to get this recovery file created. But I don't want to back up all my personal files and programs because that would take in charge the secondary hard drive together.  How to create this recovery file without saving the entire hard drive? Thank you.

    I have Windows XP Professional, and I do a back up of all the windows files that I need to run windows (I hope) on a second hard drive. I want to create a file recovery from windows on this drive, but when I go in the options backup, I have to pick up the entire computer in order to get this recovery file created. But I don't want to back up all my personal files and programs because that would take in charge the secondary hard drive together.  How to create this recovery file without saving the entire hard drive? Thank you.

    If you do any type of backup - only circuit, dat, or all - on a second internal bank or a second partition, you are just kidding yourself. It is the lowest form of backup doesn't exist, and is barely better than no backup at all. He let losses likely to be simultaneous to the original and backup for many common dangers: serious power, near the lightning seeds, failures of hard disk (if it's a second partition), virus attacks, even the theft of the laptop.

    In my view, secure backup must be on a media removable and not stored in the computer. For backup really secure (necessary, for example, if your company depends on your data), you should have several generations of backup, and at least one of these generations should be stored off-site.

    You can read this article on the backup that I wrote: 'Return to top your computer regularly and reliable' to http://www.computorcompanion.com/LPMArticle.asp?ID=314

  • In ultimate windows 7, when I want to paste or create a file on USB, windows says: the disk is write protected. ?

    in Window 7 Ultimate. When I want to create a file or paste a file copied to a USB port or flash memory, windows cannot perform this action and the message: the disk is write protected.but when I used the same USB Win XP, disc is OK and not write-protected.
    I tried this question on several USB key, but the result was the same.
    anydody can help me?

    Hi Saleh2506,

    You can try and remove the disc, remove the write protection (by reversing a tab on the disk), and then try again.

    If you do not have the valve on the USB, try the following steps to resolve the problem:

    1. Click Start , type regedit.exe and press ENTER.

    2. navigate to the following location:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrrentControlSet\Control

     

    3. control with the right mouse button and select new and key.

    4. call it as StorageDevicePolicies.

    5. click on StorageDevicePolicies and on the right pan right click and select new > DWORD and name it as WriteProtect.

    6 double-click it and set its value to 0.

    This will disable the write protection on USB/flash drives.

    Restart your computer and check to see if that fixes the problem.

    Important The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756/

    I hope this helps!

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • How to disable the yellow strip of Mozilla, who constantly reminds us to "update a plugin", which we do not want to update. Details (RE: Flash) below: bobgorg@ymail

    Hello, how disable the long horizontal Mozilla yellow band, arise and constantly reminding us to "update a plugin", which we do not want to update.

    Turn off those below:

    1 / plugins.update.notify user; true

    2 / plugin.scan.plid.all; true

    3 / dom.ipc.plugins.enabled; false

    did not help or completely disable the Flash! What else to make this ultra annoying reminder of 'Update of plugins', we want to keep the old version 10 of Flash? "' We don't have not want Flash v. 11 - it takes a lot of CPU, while the Version 10 works great for all" you tube "and"etc"... videos. No need to V.11. (Worry about viruses and security) But here it is the reminder of Mozilla if boring upgrade to Flash Version 11 - yellow band also takes the space of the screen under the address bar. Help, please. Very annoying - almost ready to move to other browsers, if this issue is not resolved. Other than that, the 14 Mozilla is great. Congratulations to all design. Thanks in advance. Bob

    Please answer: [email protected]

    Hello

    You can try plugins.hide_infobar_for_outdated_plugin set to true to Subject: config.

    Subject: config entries

  • Generate reports in double ATML

    I have what seems to be a very simple problem, but I'm having a hard time finding a solution. I use TestStand 4.2.1 (2010 D3) using sequential and parallel process templates customized depending on whether or not the Test calls for DUT/catch multiples. All I'm trying to achieve is after the test is completed, and I want the report to be generated, check to see if a StationGlobal variable (let's just call him AlternatePath) value exists with a valid path and copy the exact same report in this directory (same name, same style etc.).

    I checked the ReportGen_ATML.seq file and it doesn't seem to be any special file, concatenation is the header of the report, the body and the foot. Obviously, this can be achieved by manually copy and paste the report after its creation, but he wanted more to be done when running.

    Any ideas or suggestions would be greatly appreciated!

    Thank you!

    My solution requires you to modify process templates.

    In the process template, point of entry SinglePass and trial USE calls test report series to create the Execution.Report report. Once the report is created, it saves the report to 'Write DUT report' step by using the Report.Save function. The first parameter of the function specifies the path to the report file.

    If you want to create multiple copies of the report, you can do one of the following:

    1 run 'Write DUT report' step several times by the way of the path of file required as the first parameter.

    2. the first parameter specifies the path to the report file. You can use it with the FileCopy method in C / .net / LabVIEW to copy the required location.

    Note: The solution above may not work for the generation of reports On The Fly.

    -Shashidhar

  • I want to create report with these conditions

    Hello world

    I have to table
    -First table
    SQL > desc std_info
    Name Null? Type
    ----------------------------------------------------------------- -------- --------------------------------------------
    ROLL_NUM NOT NULL NUMBER
    NAME VARCHAR2 (20)
    AGE NUMBER
    COURSE VARCHAR2 (20)
    LOCATION VARCHAR2 (20)


    -The second table
    SQL > std_fees desc;
    Name Null? Type
    ----------------------------------------------------------------- -------- --------------------------------------------
    NUMBER OF ROLL_NUM
    NEIGHBORHOOD VARCHAR2 (5)
    NUMBER OF THE YEAR
    CLASS VARCHAR2 (20)

    -------######--------
    The data in the first table
    SQL > select * from std_info;

    ROLL_NUM NAME AGE LOCATION OF COURSES
    ---------- -------------------- ---------- -------------------- -------------------
    1 ALI 20 END BH
    MINISTRY OF HEALTH 2 22 END BH
    3 GAYL 30HR BH
    4 ABBAS 23 he LH

    The second
    SQL > select * from std_fees;

    ROLL_NUM QUARTER YEAR CLASS
    ---------- ----- ---------- --------------------
    1 Q1 2009 C1
    1 Q2 2009 C1
    1 Q4 2009 C1
    2 Q1 2009 C1
    2 Q2 2009 C1
    2 Q3 2009 C1
    2 Q4 2009 C1

    ----
    I want to create SQL statements which that help me create the report to display Null values for the second table
    more explanations, each student must pay each quarter, if he has not paid, its name should appear in the report.
    for example on my table.
    the student with 1 roll number he paid every quarter except T3 so his name should be on the report and on the report display message Hi missed Q3.
    the student with the roll number 2 does not display his name because he has paid quarterly
    the student with the roller 3 and 4 numbers must display their name because they did not pay

    I don't have your table. So I used the WITH statement to create the fictitious tables. You do not have to use the std_info and std_fees only WITH the clause, you must use is the trim.

    If your query would be like this

    with qtr
as
(
select 'Q1' quart from dual union all
select 'Q2' quart from dual union all
select 'Q3' quart from dual union all
select 'Q4' quart from dual
)
select t.roll_num, t.quart
  from (
         select roll_num, quart
           from std_info
           cross join qtr
       ) t
  left join std_fees f
    on t.roll_num = f.roll_num
   and t.quart = f.quart
 where f.roll_num is null
 order by 1,2

  • I want to create a combined pdf file so I can print 4 items per page to save on printing. Do I need a plugin for that?

    I want to create a combined pdf file so I can print 4 items per page to save on printing. It's something my printer guy did to save me from printing. However, I just bought a printer xp Epsom 200 advertised on the box that it was a feature. It turns out that it is a feature of adobe. I'm confused, why he has been announced. In any case, I have Adobe suite with PSCS5 hace. How can I do this?

    In the dialog box print of Acrobat and the free reader, you can select Multiple option to print multiple pages on a single physical page.

    If you have a file with these pages you will need to use Acrobat for that. You can use the Adobe PDF printer (on a Windows machine, at least) to generate a new PDF with several pages of the former on each page.

  • I want to download a file and do a "save under" directly in my working folder. Instead, it seems to save it somewhere as a generic term should I then copy, paste, and rename manually. Is there a way to rationalize this?

    I want to download a file and do a "save under" directly in the folder of my work. Instead, Firefox downloads somewhere with a generic name I have to copy, paste, and then rename the file. Is there a way to streamline this process simple?

    Options > general downloads section

    • If "Save files" is selected, all files will save the location shown without the intervention of the user.
    • If 'Always ask me where to save files' is selected, the user can choose the location and change the name of the saved file.
    • See-> window Options - general Board

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

    I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

    It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

  • How can I replace the mime types of server, always get the mp3, rar, sid, bin files directly in the dialog box "where do you want to save this file?"

    I used to be able to click on MP3 files, the way back when, and Firefox asks where I wanted to save. Nowadays, it opens a new tab with a flash drive.
    By clicking on the "unknown" files, like .sid, .prg, .zip, .rar is ' this is a BIN file. [Cancel] [Save] ». It does not give me a check box for "always do this".
    I would like that option to edit so that certain types of files, such as PDF, regardless of mimetype, always get opened in a new tab if you click. Also some types of files, based on the extension, always go directly to the dialog box "Where you want to save the file?", without worrying if there is a viewer or a builtin player or not. In my Firefox (41.0.1 14.04LTS 32-bit Ubuntu) I have never the choice "do this for these files always" more.
    Googling led me to delete my file mimeTypes.rdf and since file extensions can even "well known", such as .zip, are treated as BIN files and I get the box Cancel-or-Save for those too - again without the choice of "always save the BIN files.

    These files are send as Content-Type: application/octet-stream and Content-Disposition: attachment;
    To send files in this way, you cannot save an automatic action.
    You can see that in network monitor.

    Content-Disposition: attachment; filename="TURRICAN_AMIGA_PORT.sid";
Content-Type: application/octet-stream

  • you want to create the white list. How to do?

    I want a white list, but cannot find a place for it. I see < block sender >, but I want to create a list < allow >. Thank you.

    From any of your address books, you can just whitelist people. Go to Hamburger-> Options-> account-> [account] settings-> junk e-mail settings, to enable adaptive junk mail for this account controls and check address books you want from a whitelisted addresses.

Maybe you are looking for