Report showing only a single page

Similar Questions

• Omen of HP 15: Wifi stop working. Win10 shows only a single network and it connects to the WiFi

  Hi guys,.
  Since a few days my wifi stopped working.
  If I click the Wifi icon it shows only a SINGLE NETWORK (two maximum), but not mine!

  

  And I live in a building of 20 + networks, as you can see on the WiFi Analyzer (I'm the only red to the right)
  
  
  
  If I reactive / disable Wifi with fn + f12, it goes back in plane and Wifi mode mode and sees it eventually all networks:
  
  
  
  My Wifi is on top. If it is registered, Windows connects to it and then she abandons the connection; If it is not registered, and I try to connect, it says "you are not able to connect to this network.
  Is fun is that after a few seconds, each network disappears and alone is shown (probably the one next door... I don't know).
  
  I already tried to RESET the laptop MATERIAL by keeping the power button for 10-15 seconds with the laptop is turned off.
  I tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updated drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [10 default Windows], 18.32.0 [last drivers]) without success. Whenever I have install a new driver, I uninstalled the earlier software Wireless + restart.
  
  I tried to uncheked "allow this computer to turn off this device to save power" on my settings of Wifi hardware without success.
  
  HP network support said that I did not choose a Wifi (really? The problem is that I do not see my Wifi on the list!).

  This is unrelated to a new 10 Windows upgrade since I installed it months ago and this is the first time I have this problem :/ It has always worked
  
  I tried different settings too:
  I changed the channel, I put 802.11 g on my router, APSD off on the router.
  I put "Magic off packet, QoS ad hoc off, U-APSD off, fat wide channel, differential flow mode HT off" on the creation of the map without success. Nothing chaned.
  
  The hardware test detects any failure.
  
  Important note: If I close the router, it shows my network connection with full power and he connects to it. Then I come back in my room (probably 3/4 meters away), it MAINTAINS the connection for 30 / 40 min and he drops the connection and I cannot reconnect to it more. It has always worked perfectly in my room during these months (I bought it in March 2015), so the distance is not a problem, I'm 6 / 7 m away from the router.
  In this case, it shows my network (connected) and the nearby... and the other 20 networks +?
  
  The only way I have is USB tethering with my Nexus 5.
  
  Linux: I tried the WiFi on Freya elementary (Ubuntu linux OS base) and it displays 20 + networks available on the list. He has not the connection problem with my Wifi, but sometimes it stops working, Web pages stop loading and I have to restart Wifi to reconnect to the it (usually after 30/40 min of use it).
  
  -------------------------------------------------------------------------------------

  What is the problem? My Wifi card is broken? Should I call Italian support or if you have any suggestions?

  WAWood,
  I took a risk.
  I did a factory restore with recovery HP (I have a drive dedicated for her)... and it worked!
  I had to switch from Win8.1 to 10, but the Wifi problem is solved!
  
  I'm still guessing that was the problem...

  Now, I'm under Intel drivers 18.30.0.9 worm and all the networks work.
  
  In the next few days I'm checking the linux problem (reset deleted primary partition).

• In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out

  I got a new hard drive in my computer and the old a subscribed.  I then had to reinstall Windows XP Pro.  In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out.  The new shows of unallocated hard disk without a drive letter and has a black bar above it. How do I show my new hard drive that is 1 TB instead of one that was a 250 GB is not yet in my computer.

  Hi Reta,

  ·         The drive appears like 250 GB even if it's a terabyte?

  ·         Is the remaining 750Go showing as unallocated disk space?

  If this is the case, you can refer to this article on how to use disk management in Windows XP:

  How to use disk management to configure dynamic disks in Windows XP

  You can follow the directions to extend a Simple Volume so that your 250 GB turns into a single terabyte.

• I have files mp4 with 4 audio channels, but when I import it into the first it shows only a single channel

  I have the mp4 with 4 channel audio file that is not in the audio channel. When I import in the first it shows only 1 channel. In the project window, I try to find other audio channels on option audio channel (Edit-> audio channels) but it shows other channels. How active other audio channels and retrieve audio sound?

  When you go to interpret, I chose multichannel, then specified 4 tracks.

• Paste my doc Microsoft Word of 321 pages in InDesign shows only the first page, and sizes are all have done the same thing.

  When I paste my doc Microsoft Word of 321 pages in InDesign.

  (1) only the first page is displayed even if the captain said 231, and

  (2) all words are in the same size instead of what was in Word.

  Thank you.

  Do not glue, use file > Place... and hold down the SHIFT key when you click the loaded cursor.

• Oracle BI 11. Analysis report shows only 500 lines per Page

  How can I extend the Maximum lines per Page for an answer on Oracle BI 11.

  Hi user,

  Set the parameter to Pivot Table and charts parent in instanceconfig.xml file section,

  
  
  

  
  1000
  5000
  25
  30
  
  
  300
  1000
  5000
  25
  30
  
  
  2000
  1000
  2000
  25
  4096
  
  
  

  * Make a backup of instanceconfig.xml file before making the above change

  Rgds,
  DpKa

• Two tables have been targeted in sql but show only a single table top running pln

  Dear all,
  
  I captured in statspack following sql. There are two tables mentioned in the sql code. However, in the execution plan, it is alone. Grateful if you can help us with that. TQ.
  

                                                       CPU      Elapsd
    Buffer Gets    Executions  Gets per Exec  %Total Time (s)  Time (s) Hash Value
  --------------- ------------ -------------- ------ -------- --------- ----------
      448,047,663        3,738      119,862.9   95.5  1208.81   1387.07  998768410
  Module: java@myfabbus (TNS V1-V3)
  SELECT  QID, MID, MSG_STATE, MSG_STATE_WHEN  FROM mybus.MYIQ_myb
  us WHERE MID =   (SELECT MIN(Q.MID) FROM mybus.MYIQ_mybus Q, myb
  us.MYIM_mybus M    WHERE M.MSG_NAME = :1 AND M.MSG_VERSION = :2
  AND M.MID = Q.MID   AND Q.MSG_STATE = 0) AND MSG_STATE = 0

  Here's the updated sql shaped for ease of reading

  SELECT  QID, MID, MSG_STATE, MSG_STATE_WHEN  
  FROM mybus.MYIQ_mybus 
  WHERE MID =   (SELECT MIN(Q.MID) 
                    FROM mybus.MYIQ_mybus Q, 
                             mybus.MYIM_mybus M    
                        WHERE M.MSG_NAME = :1 
                        AND M.MSG_VERSION = :2
                        AND M.MID = Q.MID   
                        AND Q.MSG_STATE = 0) 
  AND MSG_STATE = 0

  Here's the sql for the query statspack report. Note that there is only one table (MYIQ_mybus) mentioned in the implementation plan.
  

  STATSPACK SQL report for Hash Value: 998768410  Module: java@myfabbus (TNS V1-V3)
  
  DB Name         DB Id    Instance     Inst Num Release     Cluster Host
  ------------ ----------- ------------ -------- ----------- ------- ------------
  MYBUSPRD      2074549195 MYBUSPRD            1 9.2.0.5.0   NO      mydm01
  
   Start Id     Start Time         End Id      End Time       Duration(mins)
  --------- ------------------- --------- ------------------- --------------
         41 13-Jan-10 08:32:14         42 13-Jan-10 09:02:15           30.02
  
  SQL Statistics
  ~~~~~~~~~~~~~~
  -> CPU and Elapsed Time are in seconds (s) for Statement Total and in
     milliseconds (ms) for Per Execute
                                                         % Snap
                       Statement Total      Per Execute   Total
                       ---------------  ---------------  ------
          Buffer Gets:     405,851,843        204,356.4   92.38
           Disk Reads:               0              0.0     .00
       Rows processed:           1,593              0.8
       CPU Time(s/ms):           1,069            538.4
   Elapsed Time(s/ms):           1,120            563.9
                Sorts:               0               .0
          Parse Calls:             121               .1
        Invalidations:               0
        Version count:               1
      Sharable Mem(K):              34
           Executions:           1,986
  
  SQL Text
  ~~~~~~~~
  SELECT  QID, MID, MSG_STATE, MSG_STATE_WHEN  FROM mybus.MYIQ_myb
  us WHERE MID =   (SELECT MIN(Q.MID) FROM mybus.MYIQ_mybus Q, myb
  us.MYIM_mybus M    WHERE M.MSG_NAME = :1 AND M.MSG_VERSION = :2
  AND M.MID = Q.MID   AND Q.MSG_STATE = 0) AND MSG_STATE = 0
  
  All Optimizer Plan(s) for this Hash Value
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Shows all known Optimizer Plans for this Hash value, and the Snap Id's they
  were first found in the shared pool
  -> ordered by Snap Id
  
      Plan
   Hash Value  Snap Id        Cost Optimizer
  ------------ -------- ---------- --------------------
    4280385364        3         2  CHOOSE
  
  Plans in shared pool between Begin and End Snap Ids
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Shows the Execution Plans found in the shared pool between the begin and end
  snapshots specified.  The values for Rows, Bytes and Cost shown below are those
  which existed at the time the first-ever snapshot captured this plan - these
  values often change over time, and so may not be indicative of current values
  -> Rows indicates Cardinality, PHV is Plan Hash Value
  -> ordered by Plan Hash Value
  
  --------------------------------------------------------------------------------
  | Operation                      | PHV/Object Name     |  Rows | Bytes|   Cost |
  --------------------------------------------------------------------------------
  |SELECT STATEMENT                |----- 4280385364 ----|       |      |      2 |
  |TABLE ACCESS BY INDEX ROWID     |MYIQ_MYBUS           |     1 |   26 |      2 |
  | INDEX UNIQUE SCAN              |MYIQ_MYBUS_I1        |     1 |      |      1 |
  --------------------------------------------------------------------------------
  
  End of Report

  Rgds
  Ung
  

• Explore the level of detail showing only a single attribute

  We have a very simple dimension, called CustomerDim, with 2 logical levels, customer and Contact. The client level has an attribute called CustomerName. The level of Contact has 4 attributes ContactID, ContactName, ContactEmail, ContactPhone.
  
  CustomerDim
  Customer
  -CustomerName
  Contact
  -ContactID
  -ContactName
  -ContactEmail
  -ContactPhone
  
  My reports of responses (simple table) allows me to drillman down the customer contact, but I still only see of attributes in the Contact section, no matter how to set up the keys to my level. Is it possible to show all attributes in a report of the response: IE, break through to the functionality in detail? I tried to set all level to "Use of Drill Down" keys, but not luck. If I put the only one of them to 'Use for drill down' who will be the one that appears in my report.
  
  I know I can probably achieve the same thing by simply accessing a new report that provides the details of my contacts, but I was really hoping that set several attributes under a logical dimensional level would achieve this.
  
  (We're on 10.3.1.4)

  have two sets of keys to the level of the contact

  1)
  ContactID
  Uncheck the use of exploration down, this is the primary key

  2)
  -ContactID
  -ContactName
  -ContactEmail
  -ContactPhone
  Select both, not not separately
  Select the option use for exploration down

• When I print from my computer to a Kodak ESP C315 printer it shows only a blank page

  The winding progress bar shows no progress and the printer produces a blank page

  Hello Ian_856,

  It worked before?  If so, what has changed?

  Let's start by download the latest drivers and software from Kodak and see if that helps.

  When you install the drivers, it is important to perform the following actions:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  Several references to printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Recently seen history showing only a single product

  I'm in according to this guide for a list of recently viewed products, but it is only to show a product and is not yet the product more recently consulted, in the script, I changed 'howManyItems' to 7,12,24 and none of them has made a difference, I put the same values in the module_data limit with the same results. After using

  {{lastProducts|json}}

  It is said:

  'totalItemsCount': 1,.

  Any ideas?

  Hey Mihai,.

  Sorry about that. Here is the link.

  Although it seems to work now, even though it's not as instant as I expected.

  Thank you.

• I run IE11 8.1 on windows. Flash installed is 15.0.0. I can't seem to print all pages in a document, it shows only the first page. I've allowed Shockwave, disables the ActiveX and windows update. What can I do else?

  of pages

  This should be corrected from Flash Player 15.0.0.189.  Run Windows Update and make sure you have the latest.

• Intel S3210shlc Server got two integrated NICs, but ESX 3.5 shows only a single network adapter

  Hi team,

  I have an Intel Server Motherboard S3210SHLC, now I installed VMware ESX 3.5. In the configuration in the network part, I can only see 1 NIC card. How can I find the 2 nd NIC card, that is how it can be possible. GUi based or CLI based. Whatever it is would do it. Please guide.

  Regrads

  Sylvia

  http://communities.VMware.com/thread/129417

  Read this topic. ICH9 is supported by ESX 3.5 dpunishment.

  StarWind Software R & D

• Sidebar calendar shows only orange... not the data either

  My calendar loads in the bar but shows only an orange page.  There is nothing else... no data at all. I tried the tools without result; It only allows me to remove the calendar.

  If it's just the calendar gadget that gives you trouble, you should be able to simply re - record a single. DLL to rectify a calendar gadget that looks like this,

  
  First remove the existing calendar gadget, and then click Start or press on the key and type cmd but don't hit. Search for CMD in the list above and right-click and select run as administrator. Confirm the warning of the DSU and provide credentials if requested.

  The open command window, type.

  Regsvr32.exe vbscript.dll
  ... and click on . You will receive a popup confirmation as follows,

  

  Restart the computer and add the calendar on the desktop gadget. It should now work as follows,

  

  If the gadget still does not work, you can try a much more aggressive approach to my solution on this page.

• EPUB contains only a blank page after export

  I have created a book from several .indd documents. I also have a table of contents. I exported the file to cretae an EPUB. When it opens in Adobe Digital Edition, it shows the metadata, the editor and just the table of contents with no content. The EPUB says that it contains only a single page, and it is empty.  I think I have put all my info correctly in export and I am at a loss to why it produces no content.

  Thanks in advance.

  If you can successfully export ePub files and a book compiled from these files, there is nothing wrong with your copy of InDesign.

  It could be a subtle corruption in the problem or files. One of the standard methods of troubleshooting is to export files IDML (InDesign Markup) of one of your problem files, and then reopen the IDML in InDesign to recreate the file. Then the ePub export. If it works, you know that there is corruption which was fixed.

• Sorting the columns showing only a line

  Hello
  
  I have a report of sql query that I helped sort on all columns. When I click on the header to sort a column report shows only one line.
  If anyone can help me, I would really appreciate it!
  
  Thank you!

  Once I met a similar problem like the one you describe. I suspect that the problem was related to the data that the report was released.
  I was able to make the problem disappear by disabling "Partial Page Refresh" for the report. Define 'NO' for the attribute "Activate partial Refresh of Page" in the page 'Report attributes' disable PPR for the report.

  CITY