Report total time of LMS

Similar Questions

• Why the total time required for the test sequence is different during the test runs

  Hello

  -J' have different test resources to test our product which includes engines and the NOR-Box (6351).

  -Number of test files in sequence that are called during the test (ca. 20)

  -The problem is that when I run these test sequence files separate (say only 3 out of 20), total time by these tests are t1, t2 and t3, but when - I left all 20 tests to run without jumping all the time needed by the 3 tests above is t1 + 60 s, t2 + 80 s and t3 + 50sec. Why it is so and how can I avoid this problem.

  -The tests are motors to move, take samples or box then save them on my computer after testing the limits. Since they are time critical, when I do all the running tests in a test go a lot do not PASS. I can't run them separately because it takes more time, more interference by user and also more than one report that is not desired.

  -J' tried unloading after execution steps, but it did not help.

  Kind regards

  RB

  This probably depends on that made your sequence. Have you tried shrink where extra time is being spent? You can time how long different parts of your sequence are following the steps of the expression as follows:

  Locals.StartTime = Seconds()

  Locals.ElapsedTime = Seconds() - Locals.starttime

  You can also watch time module in your reports. There is nothing specific on TestStand that should cause some sort of slow down like this. I recommend trying to figure out where the extra time is being spent. I suspect once you do, the cause will become obvious.

  -Doug

• hide the total time in TOC

  Hello

  How do hide you the total time that appears in the table of contents next to the search option?

  Thank you!

  Hello

  Unfortunately, you can not.

  Perhaps by exporting to Flash, but that is about the only way that I can not understand.

  You can submit a feature request (like formula) to ask for it in a future version.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• I just upgraded to Thunderbird 31.3.0 (on Windows 7). Now I can no longer launch Thunderbird. This shows only the Mozilla Crash Reporter every time.

  I just upgraded to Thunderbird 31.3.0 (on Windows 7). Now I can no longer launch Thunderbird. This shows only the Mozilla Crash Reporter every time.

  How do I recover from this?
  

  Is it possible to revert to a previous version?

  You can download the previous version of . mozilla.org and install it. After that revert to your previous version, you can check your incident reports to see what was causing the problem via help-> troubleshooting information...

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• How to insert as an entry within the formula variable, the total time on the scope window?

  How to insert, as an entry within the formula variable, the window of total time on the scope (i.e. of 20ms/div x 10 div = 200ms)?

  HERE'S A SAMPLE QUESTION:
  

  FORMULA FOR INTEGRAL ACTION:

  STATISTICS:

  Input variable: DPO4034 (CH1);

  Box: number of samples.

  FORMULA

  Input variable 0: DPO4034 (CH1); alias: x 0

  Input variable 1: 'time window Total out of scope?. " alias: x 1

  Input variable 2: number of samples (CH1); alias: x 2

  Under the operation Configuration: formula

  Y = (x 0 ^ 2) *(x1/x2)

  Output: Data 1 (CH1)

  THEN, WITH THE HELP OF STATISTICS:

  Input signal: data processing 1 (CH1)

  Checkbox: SUM

  Output: CH1 integral Action [has ^ 2s].

  
  

• Link to freeware to limit the total time used on a PC (not just at the moment where)-for real free, no demo

  HI everyone, I've seen several posts where people are asking for a free tool to limit the total time children are allowed on a PC by day.  I think that Windows 8 has this feature as part of its Parental controls, but I found this:
  http://www.romacocanada.ca/timeout/

  It is configured on a per-user basis, which means that you must log in as each individual and configure it.   A bit tedious, but you can customize it by kid I guess.

  It allows you to follow the total time per day and limit the time spent per session.  It will warn the user at a time you specify.  It also allows / the blocking program Web site, but I do not set up these features.

  I just installed it, so I can't guarantee how it works right now, so we'll see.

  Hello

  Thanks for sharing this valuable information. I suggest you to see the following links for parental control.

  What's new in Windows 8 family security
  http://msdn.Microsoft.com/en-us/library/Windows/desktop/jj155495 (v = vs. 85) .aspx

  Parental control
  http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

• Essbase Calculated Member retreival OBIEE reporting takes time

  Hello

  My OBIEE version is 11.1.1.7.0 years have a cube ASO in Essbase 11.1.2 as my source.

  There is a calculated member ASO which retreival in reports is time consuming.

  Optimization measures proposed to reduce the wait times in OBIEE.

  PS - We have integration Hyperion OBIEE in place already.

  The heads-up on the improvement of the performance would be a great help.

  Thank you

  Hello Sam,.

  OBIEE has many ways optimized:

  1. you can use the OBIEE cache management, hitting the first time the ESSBASE CUBE and the second time the OBIEE hit the cache, it improve your processing time.

  2. in your maybe views that you have limited the main information, I mean, OBIEE is a web application bi and if you try to pretend to get a lot of lines, this might give you some problems, as a work around you could limit your opinion, in your 'LINES PER PAGE' properties, and as a work around if you want to get a large amount of data that you download it.

  

  2. If points 1 and 2 shall not apply to your needs, perhaps to think, to use the cache of essbase optimization

  https://docs.Oracle.com/CD/E12825_01/EPM.111/esb_dbag/frameset.htm?dstcache.htm

  Hope this helps.

  Kind regards

• Standard report, change report Total text

  Using APEX, theme 26 5, I have a report that I need to change the text and the color of the text report Total at the bottom of the report.  Try dynamic action of charge with the following JavaScript code:

  URL: https://glassfish1.revion.com/apex/f?p=4550:1:2140114088822:

  Workspace: homeworld

  Login: demo

  password: demo

  Request 271

  Page 1...

  As a result, that does not change... I thought that it worked in APEX 4.x, cannot test now because I don't have access to an instance of 4.x...

  Any suggestions?

  Thank you

  Tony Miller
  Los Alamos, NM

  No need for JavaScript or dynamic action (but I think that the distinction uppercase / lowercase is the problem with what you have there).

  Set the required total text of report are Label in the report attributes and specify the color to aid online page CSS:

  #emp-586 .uReport tr:last-child td:first-child {
    color: #c00;
  }
  

  See the second report, which I have added to the page.

• I need a variable that I can use to display the total time spent in a course.

  I want to create a personalized certificate of completion that the learner can print at the end of a course.

  I would like to have the total time spent in the price that is displayed on it, but I'm not sure of the variable to use.

  Take a look at: time display information - Captivate blog

  After reading if you have any other questions, fire away.

• How can I calculate the total time in java?

  Hello!
  
  I need to calculate the total time!
  
  For example I start time:
  Format formatter1;
  Date date1 = new Date();
  formatter1 = new SimpleDateFormat("hh:mm:ss");
  Dim startTime = formatter1.format (date1);
  startTime = "14:20:40.
  
  And I have finishing time:
  Format formatter2;
  Date2 date = new Date();
  formatter2 = new SimpleDateFormat("hh:mm:ss");
  String finishTime = formatter2.format (date2);
  finishTime = '08:30:55;
  
  
  
  Also, having calculated manually, I get the total time: '18:10:15.
  
  How can I calculate the total time in java? (Using formatter1 and formatter2 I guess)
  
  What I need is to print 'total 18:10:15 '.
  
  Thank you!

  800512 wrote:
  I did the following, but I think something's wrong here:

  I've defined before: Date date1 = new Date(); Date2 date = new Date();
  And it should be exactly 5 seconds between them.

  I found the delta between date1 and date2:

  Format formatter = new SimpleDateFormat("HH:mm:ss");
  timeInMilliFromStart long = date1.getTime () - date2.getTime ();
  Date date3 = new Date (timeInMilliFromStart);
  String timeInSecFromStart = formatter.format (date3);

  and I still get
  timeInSecFromStart = 02:00:05

  But it should be exactly 00:00:05.

  What is a problem?

  Because, as I said, a Date to measure a moment in time, not a period. So when you have 5000 ms, and you that transform a Date, this means that 5 seconds after the time, which equals 00:00:05.000 01/01/1970 GMT.

  As I said, if you are not currently in GMT, then you must set the DateFormat GMT TZ. Right now, it's to show you the time in your TZ. If you have included the date in your SimpleDateFormat, you would see the 01/01/1970 or 31/12/1969, function that TZ you find.

  Bottom line: you try to use these classes in a sense they are not intended for, and while you can get the results you want for a limited set of entries if you understand how these classes and how to work with it, it is a fragile approach and comes with all sorts of warnings warning.

• How do I get the total time elapsed displayed on the stage?

  Hello

  I have a program that will count every second past with a key press to the other, in the exit sign that I get all the time what past (per second), but here the total number displayed in a text box on the stage at the end.  This will be the total time between supports.

  Thanks for your help, it is very much appreciated as a newcomer in Actionscript.

  Also, I use video clips of Doug Winnie to help me so if you know a particular episode that will cover then please let me know.

  Mick

  use a variable to store this value and increment when appropriate.

• Addition of 2 time formulas in the text boxes to get a total time

  I have tried to add 2 calculations of time together to get a total time rounded to the minute, but were unsuccessful.

  What I have right now in the field "TimeIn1 and TimeOut1" is the calculation when the click on "$=Num2Time (Time ()) '

  I'm working on

  to ensure that the person using the form can click in the time zones and have the time entered automatically. So I want to add 4 fields

  to get a total time spent on a project.

  The 4 fields are;

  TimeIn1

  TimeOut1

  TimeIn2

  TimeOut2

  Total time

  I need to the equasion like that;

  (Timein1 + (TimeOut1-TimeIn2) + TimeOut2) / 60 = TotalTime

  Can someone help me. Is the best way to run the formula as a formcalc or a Java Script better.

  Please help this newbie.

  The 'Time2Num()' function converts a time range for the number of milliseconds of the date of the time for LiveCycle Designer. It is the optional parameters for a string of format and the locale identifier string that can perform the more reliable conversion function will know the format of the string. I found using the property "formattedValue" also contributes to the maintenance of reliability.

  get the time in milliseconds
  var In1 = Time2Num (TimeIn1.formattedValue, "HH: mm")
  var Out1 = Time2Num (TimeOut1.formattedValue, "HH: mm")
  var In2 = Time2Num (TimeIn2.formattedValue, "HH: mm")
  var Out2 = Time2Num (TimeOut2.formattedValue, "HH: mm")
  calculating elapsed time in hours for the entry and exit times
  ((OUT1-IN1) + (Out2 - In2)) / (1000 * 60 * 60)

• Export and interactive report totals

  Hi all
  
  I tried to get the totals on the basis of an interactive report, but the only way I can find is to make it as aggregations and save it as the default report.
  
  The problem is when users download the report totals are missing, is it possible to have the total number, displayed and downloaded with an interactive report?
  
  Apex to 3.1
  
  Thank you
  
  Graham

  totally different approach would be to add totals to your choice.

  It works for some already very well grouped queries
  Something like

  select e.departmentid, d.name, count(*) emp#, avg(e.salary) sal
  from employees e
  join departments d on d.departmentid = e.departmentid
  group by e.departmentid, d.name 
  

  Displays the number of employees and the salaray average for each Department.
  Now we can add a total row using rollup, or grouping sets

  select e.departmentid,  d.name, count(*) emp#, avg(e.salary) sal
  from employees e
  join departments d on d.departmentid = e.departmentid
  group by grouping sets ((e.departmentid, d.name), ());
  

• Report Total partial and Total formatting help

  
  Hello

  I need help with the format of Reporting for subtotal and total. The task that made me to try to find out if we can reproduce at APEX, a Cognos report. This report format is in such each subtotal will display the name of the district, and the name and the value must be "BOLD". In total, then will also be a name of the Organization as a 'total Institution '. So far, for the objective test, I have this demo using the Oracle OEHR data that follow and get the subtotal without the name and the total without the rollup group name and order of

  {

  Select distinct OEHR_CUSTOMERS_VIEW. COUNTRY_NAME as institution_sector,

  OEHR_CUSTOMERS_VIEW. CUST_FIRST_NAME as an Institution,

  sum (OEHR_CUSTOMERS_VIEW. CREDIT_LIMIT) as fall_2009,

  sum (OEHR_CUSTOMERS_VIEW. CREDIT_LIMIT) as fall_2010,

  sum (OEHR_CUSTOMERS_VIEW. CREDIT_LIMIT) as fall_2011,

  sum (OEHR_CUSTOMERS_VIEW. CREDIT_LIMIT) as fall_2012,

  sum (OEHR_CUSTOMERS_VIEW. CREDIT_LIMIT) as fall_2013

  of OEHR_CUSTOMERS_VIEW OEHR_CUSTOMERS_VIEW

  Group of rollup (COUNTRY_NAME, CUST_FIRST_NAME)

  order of COUNTRY_NAME, CUST_FIRST_NAME

  }

  This give me the results I want, but I want to print the name of instition_sector in subtotal, I won't show my institution_sector in nowhere in the report but my total part-time.

  SQL formatting report do not.

  Not tested the application, please try

  Select distinct NVL(OEHR_CUSTOMERS_VIEW. CUST_FIRST_NAME,NVL(OEHR_CUSTOMERS_VIEW. COUNTRY_NAME,'Total Institution') as an Institution.

  sum (OEHR_CUSTOMERS_VIEW. CREDIT_LIMIT) as fall_2009,

  sum (OEHR_CUSTOMERS_VIEW. CREDIT_LIMIT) as fall_2010,

  sum (OEHR_CUSTOMERS_VIEW. CREDIT_LIMIT) as fall_2011,

  sum (OEHR_CUSTOMERS_VIEW. CREDIT_LIMIT) as fall_2012,

  sum (OEHR_CUSTOMERS_VIEW. CREDIT_LIMIT) as fall_2013

  of OEHR_CUSTOMERS_VIEW OEHR_CUSTOMERS_VIEW

  Group of rollup (COUNTRY_NAME, CUST_FIRST_NAME)

  order of COUNTRY_NAME, CUST_FIRST_NAME;