Essbase Calculated Member retreival OBIEE reporting takes time

Similar Questions

• Essbase calculation Variable computing time

  Hope someone can help me understand what could be possibly be causing calc processing time varies from time to time in a locked script (so no data entry) in a single environment. Our application is about 90 GB in size and runs on a dedicated server Essbase (no other application lies in this area) which has 12 physical cores, 1 terabyte drive 128 GB of RAM, and runs on 64-bit Windows Server 2008. The suite of planning, including Essbase, is stopped and restarted every night at midnight and after the reboot, a MAXL script that runs all calculations of forecasts is triggered. En_regle_generale, the calculation of forecast that runs after the reboot takes longer (2 hours and 20 minutes) and I always thought it was because 1) because it occurs after the restart there is nothing in memory and 2) there are 2 processes FDM that runs and also triggers other calculations that runs at the same time that the calculations of forecasts.

  Six hours later, with international users making up (no new entries as the scenario is locked), I performed the same calculations of forecasts and the whole process falls to 1 hour 10 minutes. Yet once, I guess due to the preliminary calculations data is already in memory so that the calculations are faster. However, after another six hours, I run the same calculation of forecast (once again no news is entered as the scenario is locked) the calculation takes 1 hour 30 minutes.

  As a note, a restructuring of the entire database is performed every week.

  Thank you

  Retrieves definitely cycle different cache data blocks, Yes.

  I agree, if the time goes back without a longer defragmentation, fragmentation is not (or not only).  I encourage you to capture as many (statistical data) you can even if, in the course of investigation.

• Hyperion Planning TxtCase appear in OBIEE reports.

  Hello
  
  The requirement is corresponding Hyperion Planning entered in forms on OBIEE reports comments. I was able to retrieve details about the author, content of the note as well as the corresponding dimensions in considering the following tables:
  1.HSP_CELL_NOTE
  2.HSP_CELL_NOTE_ITEM
  3.HSP_OBJECT
  4.HSP_USER
  
  But I'm confused about the later approach that I take. How the Federation would be made with the Essbase cube in the OBIEE repository? How comments should be referenced to specific OBIEE reports corresponding to the Hyperion Planning Forms?
  
  I use Hyperion Planning 11.1.2.2 and OBIEE 11.1.1.6.
  
  Any help is appreciated.
  
  Thank you and best regards,
  Karamba.
  
  Published by: Karamba SJ on May 29, 2013 12:06 AM

  The problem has been resolved. For example. For comments, a notice must be created in the relational database where the records retrieved from the HSP_CELL_NOTE and HSP_CELL_NOTE_ITEM HSP_OBJECT, the Member of dimension alias names must be recovered form HSP_ALIAS or HSP_MEMBER in the view. Then using the lookup function in OBIEE, we can extract the value (comment) the relational database view looking upward with the names of members alias Essbase in the MDB layer. Thanks to Charles Philippe for orientation. Hope it helps others.

  Thank you and best regards,

  Karamba.

  Post edited by: DebaratiSJ

  It seems strange to own brand as a correct response, but just to make sure that the issue has been addressed and that the right answer is available.

• Type [0] unknown calculation for the dynamic calculation. Only default agg/formula/time balance operations are managed.

  Hi all

  I came across this error last Monday. I tried all the recommendations and configurations and nothing seems to work to solve the problem.

  Here is the error message-

  [Game Sep 24 12:04:27 2015] Local, ARPLAN, ARPLAN, Ess.Tee@MSAD_2010/9240/Error (1012703)

  Type [0] unknown calculation for the dynamic calculation. Only default agg/formula/time balance operations are managed.

  [Game Sep 24 12:04:33 2015] Local, ARPLAN, ARPLAN, Ess.Tee@MSAD_2010/9240/Warning (1080014)

  Abandoned due to the State [1012703] [0x2e007c (0x56042d17.0xeadd0)] transaction.

  [Game Sep 24 12:04:33 2015] Local, ARPLAN, ARPLAN, Ess.Tee@MSAD_2010/8576/Warning (1080014)

  Abandoned due to the State [1012703] [0x40007d (0x56042d18.0x781e0)] transaction.

  [Game Sep 24 12:04:34 2015] Local, ARPLAN, ARPLAN, Ess.Tee@MSAD_2010/736/Info (1012579)

  Total time elapsed Calc [Forecast.csc]: [621,338] seconds

  The script I'm running-

  SET CACHE HIGH;

  SET MSG SUMMARY;

  LOW GAME REVIEWS;

  UPDATECALC OFF SET;

  SET AGGMISSG

  GAME CALCPARALLEL 2;

  SET CREATEBLOCKONEQ

  SET HIGH LOCKBLOCK;

  FIX ('FY16', 'Final', 'Forecasts', '11 + 1 forecasts', 'prediction of 10 + 2', '9 + 3 forecast', '8 + 4 forecasts', "forecast 7 + 5", "6 + 6 forecast", "forecast 5 + 7", 'forecast of 4 + 8', '3 + 9 forecast', 'forecast 2 + 10', '1 + 11 forecasts')

  DIFFICULTY (@IDESCENDANTS ('entity'))

  CALC DIM ("account");

  ENDFIX

  DIM CALC ("entity", "Currency");

  ENDFIX

  In the essbase.cfg I have already included-

  NETDELAY 24000

  NETRETRYCOUNT 4500

  /Calculator cache settings

  CALCCACHEHIGH 50000000

  CALCCACHEDEFAULT 10000000

  200000 CALCCACHELOW

  Lockblock/set limits

  CALCLOCKBLOCKHIGH 150000

  CALCLOCKBLOCKDEFAULT 20000

  CALCLOCKBLOCKLOW 10000

  Please suggest if there is a way to fix this error. I get a similar error for other calculations as well.

  Kind regards

  EssTee

  And you are positive that no one came in a new Member at level 0 as dynamic Calc?

  What are the versions do you use?

• using ramdisk to speed of rollup and Essbase calculation

  Understand that max Essbase can use up to 2G or 4G memory for the calculation, we can use leftovers of RAM in the server to form some temporary disk or others to accelerate the rollup and Essbase calculation?
  
  Oracle database can have some memory based SQL tables to speed up the process. Not sure, that essbase has functionality similar or not.
  
  Thanks in advance.

  What takes longer to your batch process? What is the time of aggregation?

  The thing with ASO is that you need to look at it a little differently. Once the data is loaded, you can question him, it should not be aggregated. Granted some pulls may be slower, but it will pull. If in practice, you can load data and allow users to have him while aggregation is running. Aggregation is just a bonus for the best time of the query, because the aggregation runs, query will improve the time.

  If your batch processing takes a lot of time during loading data, which is where I see most of the time with my ASO databases, then you must watch other things because I don't know if being run RAM will help a lot with regard to loading data at any given time to write to disk.

  If the data loading is your problem, then you must look load pads and break your loading data into pieces to take advantage of parallelism. (I don't think it's a real word)

• Integrate the OBIEE report to the applet SIEBEL using realtime mode

  Issues related to the:
  1. I should send him the siebel parameter to the obiee, so the obiee report can be displayed in real time.
  but I do not know how to send the parameter customizable siebel to the OBIEE
  
  So thank you very much, who can help me.

  Hello

  You can try this.

  Name value of the Argument Type Argument
  P0 2 constant
  EQ P1 constant
  Constant P2 "-account profile". " Status of the account.
  P3 status of domain account
  Constant EQ P5
  Constant P6 "-account profile". " Account type ".
  P7 field Type

• I just upgraded to Thunderbird 31.3.0 (on Windows 7). Now I can no longer launch Thunderbird. This shows only the Mozilla Crash Reporter every time.

  I just upgraded to Thunderbird 31.3.0 (on Windows 7). Now I can no longer launch Thunderbird. This shows only the Mozilla Crash Reporter every time.

  How do I recover from this?
  

  Is it possible to revert to a previous version?

  You can download the previous version of . mozilla.org and install it. After that revert to your previous version, you can check your incident reports to see what was causing the problem via help-> troubleshooting information...

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Page Designer, it takes time to save page almost 15 seconds. !

  Hello..

  My problem is:

  Page Designer, it takes time to save page almost 15 seconds. Or when save creator of the Page after you edit something, I found slow down to save the process, taking more than 15 seconds to save the changes to the page.

  It was not before to install the new OS for my PC, its not normal before.

  Components of the OS:

  OS Linux

  Core i5

  8G of RAM

  Apex 5.0.2

  Java 8

  listener ADR v2.0.9

  Server glassFish 4.1

  I looked inside the Google I find no matter what topic, discuss or resolve the problem around APEX framework of work, but all topics tALC on how to speed up, more performance for server GlassFish.

  Note "APEX_PUBLIC_USER to unlock."

  I want to help me.

  Hi Amr Abdeen,

  AMR Abdeen wrote:

  Chubby Kiran fac586

  Please help me

  First of all I would like to you to use the tools of development of the browser and check under the tab "Console" when the page designer is responsible for checking if there are JS errors after loading page designer. Also check the 'Network' tab to investigate on what goes wrong.

  As the code-behind Page Designer is designed by "Oracle APEX Development Team", it is difficult to know where is the problem, why it behaves like that and what should be the solution. Yes, better you can drop an email from retail [email protected] on the problem you are experiencing OR if you have support contracts with Oracle, then raise this issue on My Oracle Support (MOS).

  Looping in Patrick Wolf-Oracle, John Snyders-Oracle and Christian Neumueller-Oracle to Oracle APEX development team.

  Kind regards

  Kiran

• OBIEE reporting requiremnt:Display image based on the value of result report

  Hello

  
  

  I have an OBIEE reporting requirement, the report displays the result out of 10 based on a value selected in the command prompt dimension, what I want is if the score is less than 5, the image of warning should appear right in the report score with a sufficient distance and if the score is greater than 5, I want a right image tick.

  It will be a great help if someone will give me the solution as soon as possible, because I have a very urgent need.

  
  

  Thanks in advance.

  

  It took 3 clicks to hide the structure of the table...

  For the "how to return an image of the formula in the column" it's just the data format of the column that should be set to the URL of the Image and your column value must be the URL of the image. If you add a formula as CASE WHEN your_condition THEN 'http://.../picture1.jpg' WHEN your_condition_2 THEN 'http://.../picture2.jpg' END

  

• Planning the OBIEE reports

  I am planning the OBIEE reports to mail through the SMTP server, but this is show planning is competing with compensation and out there is in the average mail meail goes the recipeents.

  Please help me on this if someone has encountered this.

  The error that I do when I run the scheduling is less than

  Agent: / shared/kiraann/N_ATTR_Reports/agent

  [nQSError: 75005] Cannot send the AUTH command. SMTP server does not support authentication mechanisms.  Remove email credentials, or use a server that supports authentication.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  ... Loop delivery SMTP to try again... Sleep for 3 seconds.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  [nQSError: 75005] Cannot send the AUTH command. SMTP server does not support authentication mechanisms.  Remove email credentials, or use a server that supports authentication.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  ... Loop delivery SMTP to try again... Sleep for 5 seconds.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  [nQSError: 75005] Cannot send the AUTH command. SMTP server does not support authentication mechanisms.  Remove email credentials, or use a server that supports authentication.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  ... Loop delivery SMTP to try again... Sleep for 5 seconds.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  [nQSError: 75005] Cannot send the AUTH command. SMTP server does not support authentication mechanisms.  Remove email credentials, or use a server that supports authentication.    Agent: / shared/kiraann/N_ATTR_Reports/agent

  Exceeded number of SMTP delivery attempts.

  The Agent, test_a, completed with warning

  Thank you

  Thank you for responding. It's helped me. Problem is solved.

  Thank you

• Access Essbase calculations to a user of the planning

  Hi all

  I hope that you all made great.

  How to give a user of planning through Smartview access to essbase calculations.

  An administrator can see the essbase calculations and can run. How to give access to essbase calculations without administrator access?

  Kind regards

  VT

  Try provisioning user with the role of «User Ad» - Hoc Then, he should be able to send data and run Smart View rules.

  Thank you

  Rajiv

• OBIEE report showing blank for some fields

  Hello

  I have a problem with OBIEE report only when generating the report in CSV.
  Some fields are displayed empty in CSV, appear correctly in other formats. I doubt that this is because the length of the text field is longer.

  Any help will be appreciated.

  what you see in the report?

• Essbase calculation script syntax

  [Version is 11.1.2.0] What is the syntax of Essbase calculation script to call another script of calculation?   MaxL or a business rule the only/best way to trigger a calc?

  > Yes, an OBJECT-oriented approach.  We have 50 + scripts that perform a kind of updated data and there are many places to keep same code if we incorporate the timestamp in detail in each script.

  ^ ^ ^ You can do totally in HBR or Calc Mgr.  It is not really oriented OBJECT, but it is at least the subroutines that you can use again.  HBRs and rules of Archbishop Calc can be run from the command line.

  With the help of these tools can be much easier than to try and roll.

  Kind regards

  Cameron Lackpour

• Send an OBIEE report to the user no OBIEE Mail (customer) in OBIEE11g

  Hi Patricia,
  
  I'm fresher to OBIEE, I need step to 'send an OBIEE report the user no OBIEE Mail (customer) in OBIEE11g. searched on-line got only OBIEE 10 g Documents that one also followed but no results. Please help me... step to config a courier for external users.
  
  Thnaks,

  That the SMTP server configured by your admin and create a privilege given to your role agent. Then schedule an Agents to yourself / Testuser with the report to be sent to external users as its content. Configure the profile of delivery to the recipient. In the implementation for electronic device - profile of delivery specify the external e-mail address. This might be useful

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/bi/bi11115/delivers/alerts.htm

  Thank you.