Report with the sql query area

Similar Questions

• Pool pane there problem with long sql query?

  Hello

  I use Jdeveloper 11.1.2.2.0

  In the application I'm developing, there is a long sql query to call (it's a function from a package, which may take a few minutes to run) and I want to display a progress bar for the user.

  The progress bar component is a "progress indicator" and the percentage of achivement is refreshed by a component 'pool' with 1-second interval.

  The two components are connected in a javabean.

  The function with the sql query is the javabean too.

  To run the sql query that is long on background I am calling from a thread, and the pool component get the advancement of the percentage of a pipe filled with the sql function.

  If the function to run is just a long loop of java operations the progress bar works fine, but if I put my long sql query instead, stop listener pool should be performed to stop long, s sql queryo progress are updated only at the end of the long sql query.

  You have any ideas?

  Thank you

  Thanks for your replies. Unfortunately, it was not the solution to my case, sql procedures to block the entire application while ADF awaits them at the end...

  To solve my problem, I finally used a PL SQL Job to call my sql procedure (dbms_job.submit).

  The application is released right after the call and the component of the pool is not more secure!

  Kind regards

  Yann

• change the results of the report with the selection list using dynamic action

  This is one of those situations where if I could understand the appropriate search terms to use, someone else must have asked this question in the past.
  
  I have a report with a SQL query with a condition based on a list of selection on the same page. So I have a list of selection -: P177_FISCAL_YEAR
  
  My request for my report is:
  
  Select md_id, display_name, description
  of media_tbl
  where fiscal_year =: P177_FISCAL_YEAR
  
  When a person makes a selection on the selection list (: P177_FISCAL_YEAR), I would like to report up-to-date without having to submit the page. I was hoping that I could do something like this using a dynamic action but have not found a way to do it.
  
  Thanks in advance!
  
  John

  Create dynamic Action:

  When
  Event: change
  Selection type: product (s)
  Article (s): P177_FISCAL_YEAR
  Condition: - unconditionally.

  Real Actions (add 2 real actions)
  -the first is to load the value in session state so that the report can see.
  Sequence: 5
  Action: execute the PL/SQL Code
  Code PL/SQL: null;
  Items to submit page: P177_FISCAL_YEAR

  -the second to refresh the report
  Sequence: 10
  Action: Discount
  Selection type: region
  Region:

• Report with the items on the page

  Hi all
  
  I use APEX 4.0.3 and I would create a report where I could have editable page elements it contains. My goal was to have for example a variable number with its features displayed in the report and the power column choose a second from a selection list to associate with the first.
  
  In summary, I need to have a selection list in the report, and I need to know how to access the value of this element in each of the train.
  
  Thank you
  Mike

  You will need to loop.

  Find out "paintings of SEO, SEO of the values in a sequence to process" sections in the following documents.
  This should give you a fair idea.

  http://download.Oracle.com/docs/CD/E10513_01/doc/apirefs.310/e12855/apex_app.htm

  For example, if you have a report with the following query

  SELECT APEX_ITEM. Text(1,column_name) FROM myTable;

  and if you have 10 rows in the table, then 10 items of text will appear on your page.
  Given that we gave the ID (p_idx) as a 1, we can refer these elements of text using G_F01 picture. (If its 2 then G_F02 etc. we can have up to 50 dynamic element on one page)

  G_F01. COUNTY gives us "number of items".
  G_F01 (i) gives us the value of i ^ e ^ text value of the element.

  It may be useful

  Kind regards
  Hari

• Report of update SQL query with line selector. Update process.

  I have a report of update SQL query with the selectors in line.
  How to identify line selector in a process update on the page.
  
  I want to update some columns with a value of an area of selection on the page.
  
  With the help of the base:
  
  UPDATE table_name
  SET Column1 = value
  WHERE some_column = some_value
  
  I would need to do:
  
  UPDATE table_name
  SET column1 =: P1_select
  WHERE [line selector] =?
  
  Now sure how to identify [line selector] and/or validate it is checked.
  Thank you
  Bob

  Identify the name of the checkbox of the source of the page element, it should be of the fxx format (f01, f02... f50).
  Suppose that we f01.

  for i in 1 .. apex_application.g_f01.count
  loop
    UPDATE CONTRACTS
    SET SIP_LOAD_FLAG = :P16_STATUS
    where  =  apex_application.g_f01(i); --i'th checked record' primary key
  end loop;
  

• Classic report shows wrong "could not parse the SQL query: ORA-00942" error after migrating app to the new environment

  After migrating my APEX 4.1 application to a new environment, one classic report displays a "cannot parse the SQL query: ORA-00942: table or view does not exist" error when the page is displayed. Change the region to report SQL source to somehow (e.g., remove spaces, changing the order of the variables in the WHERE clause) immediately solves the problem, but by returning to the source of the region causes the report error again (the source region valid code without error, however).

  Throw the error message:

  Select v.id,

  v.Col1

  of view_vw v

  where (: P1_FILTER is null or)

  v.col2 = :P1_FILTER)

  Do not throw error:

  Select v.id,

  v.Col1

  of view_vw v

  where (:P1_FILTER is null or)

  v.col2 = :P1_FILTER)

  Changing the order of column in the report has the same effect; i.e. He arranges, but return back to the original column order causes the error to display.

  It's as if a cached result for the correct select statement used by the report is displayed. However, the application does not use the caching of page/region. Any ideas of what could be the cause?

  He solved. Ultimately, all that was necessary was to clear the DB cache using:

  alter system flush shared_pool;

• Export as .xls. Classic report type: SQL (body of function from PL/SQL returning the SQL) query

  Hey guys,.

  I'm using version 4.2.6 apex. The theme is 26.

  IM also using Listener Oracle APEX.

  I can print my classic report in PDF or CSV format.

  But I need to export it as a .xls extension.

  Report type: SQL (body of function from PL/SQL returning the SQL) query

  I need is like this cause my 'where' clause type is dynamic.

  Look at using this method: Tom's Blog: a non-standard export excel 2010 (.xlsx)

  I do something similar for downloads to excel in my projects...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• problem with bind variables in the SQL query view object

  Hi all

  I use JDev 11.1.2.4.0.

  I have a problem with bind variables in the SQL query view object.

  This is my original SQL

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE t.nctuser_id = '20022' 
        AND to_char(t.insertdate,'YYYYMMDD') in ('20130930','20130929')
  group by t.legertype_id
  

  In my view .xml object query tab, I am writing this

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE   t.nctuser_id = '20022'
      AND to_char(t.insertdate,'YYYYMMDD') in :dddd
  group by t.legertype_id
  

  Davis here is a variable of Type liaison: String, updatable and necessary.

  I try to deal with Davis as ('20130930 ', ' 20130929') hoping the view object, run as my original SQL.

  But failed. The view object retrieves 0 line after that I run.

  Why?

  Thank you! ('2original SQL0130930', '20130929') ('20130930 ', ' 20130929')

  A variable binding cannot be used as this is why you must use years table. Check decompilation binary ADF: using oracle.jbo.domain.Array with ViewCriteria to see a solution.

  Timo

• Change the font color in a report by using the SQL query

  Hello
  
  I'm changing the font color based using a BOX the query in the form below:
  

  select "ORDER_ID", 
  "ORDER_REFERENCE",
  "ORDER_DATE",
  "ORDER_SOURCE",
  "TOTAL_DISCOUNT",
  "DELIVERY_TYPE",
  "PICKUP_DATE",
  case
       when order_status = 1 then '<font color="red">'|| order_status||'</font>'
       else
       '<font color="blue">'||order_status||'</font>'
  end order_staus,
  "DELIVERY_STATUS",
  "USER_ID",
  "CUSTOMER_ID",
  "SITE_ID"
  from "ORDERS" 
   

  I can get this working by selecting the Standard report column in the type of the column header . However this to say that I can't use the LOV LOV options involve removing the HTML characters.
  
  Is there a way I can conditionally change the font with the above query and use LOV as well? Thank you.
  
  Environment
  
  Apex 4.1.1 to apex.oracle.com
  Theme 13
  
  Published by: taepodong on June 3, 2012 07:28

  I'm sure that not looking the application form first before posting this question.

  Your solution would be:
  Please edit your report column under > report attributes > and select the property view as as a Standard report column

• Report with the query with union and parameters

  Hello
  
  We have an obligation to create a report with the request, which is the union and parameters.
  
  I intend to create a database for the report based on a query. But the problem here is that the way to pass parameters in the query.
  
  Request is something like that
  
  Select x.a, x.b, x.c
  x
  where x.year =: para1
  and x.status = 'A '.
  Union of all the
  Select x.a, x.b, x.c
  x
  where x.year =: para1 - 1
  and (x.status = 'c' and x.date =: para2 or x.status = 'I' and x.date < =: para2)
  
  Here x.year in the first select statement must be equal to: para1 and second select statement, it should be: para - 1.
  
  How this requirement can be achieved?
  
  Client don't want to separate worksheet, a parameter and another for the actual data that I tried with sys_context and it worked. But the client wants the result in a single sheet only... So I need to change their approach.
  
  Help, please.
  
  Thank you

  Hello
  Another option is to convert the request so that you will have the items from the selection
  for example on the query you provided that you can use:

  Select 'Curr' rec_type, x.a, x.b, x.c, x.year, x.date, x.status
  x
  where x.status = "A".
  Union of all the
  Select 'Prev' rec_type, x.a, x.b, x.c, x.year, x.date, x.status
  x
  where x.status in ('c', 'I')

  then, in the workbook, you will be able to create conditions such as:
  rec_type = 'Curr' and year =: para1

  rec_type = 'Prev' and year =: para1-1
  rec_type = 'Prev' and (status = 'c' and date =: para2 or status = 'I' and date)<=>

  Tamir

• Help with making SQL query references to column aliases in the Case statement

  I need help with a sql query that I'm trying. I can go about it the wrong way, but I would be grateful if I could get any suggestions on possible solutions. This is my query:
  
  
  SELECT DISTINCT spriden_pidm, spriden_id id, spriden_last_name | ',' | spriden_first_name name,
  
  CASE
  WHEN rcresar_comm_code_01 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_01
  WHEN rcresar_comm_code_02 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_02
  WHEN rcresar_comm_code_03 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_03
  WHEN rcresar_comm_code_04 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_04
  WHEN rcresar_comm_code_05 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_05
  WHEN rcresar_comm_code_06 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_06
  WHEN rcresar_comm_code_07 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_07
  WHEN rcresar_comm_code_08 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_08
  WHEN rcresar_comm_code_09 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_09
  WHEN rcresar_comm_code_10 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_10
  END acg_elig_comm_code
  
  CASE
  WHEN acg_elig_comm_code = ' 268' THEN 'rigorous HS course. "
  WHEN acg_elig_comm_code = '269' THEN ' 2 or several AP or IB"
  WHEN acg_elig_comm_code = '270' THEN 'NOC as possible ".
  END comm_code_description
  
  OF spriden, rcresar, rcrapp1
  
  WHERE (rcresar_comm_code_01 IN ('268 ', '269', ' 270')
  
  OR rcresar_comm_code_02 ('268 ', '269', ' 270')
  
  OR rcresar_comm_code_03 ('268 ', '269', ' 270')
  
  OR rcresar_comm_code_04 ('268 ', '269', ' 270')
  
  OR rcresar_comm_code_05 ('268 ', '269', ' 270')
  
  OR rcresar_comm_code_06 ('268 ', '269', ' 270')
  
  OR rcresar_comm_code_07 ('268 ', '269', ' 270')
  
  OR rcresar_comm_code_08 ('268 ', '269', ' 270')
  
  OR rcresar_comm_code_09 ('268 ', '269', ' 270')
  
  OR rcresar_comm_code_10 ('268 ', '269', ' 270'))
  
  
  Rcresar_aidy_code = & aidy_code
  
  AND rcrapp1_aidy_code = rcresar_aidy_code
  
  AND rcrapp1_curr_rec_ind = 'Y '.
  
  AND rcrapp1_seq_no = rcresar_seq_no
  
  
  AND spriden_pidm = rcresar_pidm
  
  AND rcrapp1_pidm = rcresar_pidm
  
  
  AND spriden_change_ind IS NULL
  
  ORDER BY name
  
  
  The second case statement is where I don't know exactly what it takes to get what I want.
  
  Output should be like:
  spriden_pidm name ID acg_elig_comm_code comm_code_description
  «0000000000', ' 1111111111 ","John Doe","268", «rigorous HS race"»
  
  If I take the second case statement it works great except that I do not have my comm_code description column. My question is how can I use my first statement value box to determine this column? I think that I need a case statement as I have, but I don't know how to reference the value of acg_elig_comm_code. Any help would be greatly appreciated. Thank you.
  
  Published by: blackhole82 on January 20, 2009 09:20

  Hello

  You cannot use the alias column in the query, even where it is set (except in the ORDER BY clause).
  You can set the alias in a subquery and then use it in a great query, like this:

  WITH  sub_q  AS
  (
      SELECT DISTINCT spriden_pidm,spriden_id id, spriden_last_name||', '||spriden_first_name name,
          CASE
              WHEN rcresar_comm_code_01 IN ('268','269','270') THEN rcresar_comm_code_01
              WHEN rcresar_comm_code_02 IN ('268','269','270') THEN rcresar_comm_code_02
              WHEN rcresar_comm_code_03 IN ('268','269','270') THEN rcresar_comm_code_03
              WHEN rcresar_comm_code_04 IN ('268','269','270') THEN rcresar_comm_code_04
              WHEN rcresar_comm_code_05 IN ('268','269','270') THEN rcresar_comm_code_05
              WHEN rcresar_comm_code_06 IN ('268','269','270') THEN rcresar_comm_code_06
              WHEN rcresar_comm_code_07 IN ('268','269','270') THEN rcresar_comm_code_07
              WHEN rcresar_comm_code_08 IN ('268','269','270') THEN rcresar_comm_code_08
              WHEN rcresar_comm_code_09 IN ('268','269','270') THEN rcresar_comm_code_09
              WHEN rcresar_comm_code_10 IN ('268','269','270') THEN rcresar_comm_code_10
          END acg_elig_comm_code   -- Originally posted with , here (error)
      FROM spriden, rcresar, rcrapp1
      WHERE (rcresar_comm_code_01 IN ('268','269','270')
              OR rcresar_comm_code_02 IN ('268','269','270')
              OR rcresar_comm_code_03 IN ('268','269','270')
              OR rcresar_comm_code_04 IN ('268','269','270')
              OR rcresar_comm_code_05 IN ('268','269','270')
              OR rcresar_comm_code_06 IN ('268','269','270')
              OR rcresar_comm_code_07 IN ('268','269','270')
              OR rcresar_comm_code_08 IN ('268','269','270')
              OR rcresar_comm_code_09 IN ('268','269','270')
              OR rcresar_comm_code_10 IN ('268','269','270'))
      AND rcresar_aidy_code = &aidy_code
      AND rcrapp1_aidy_code = rcresar_aidy_code
      AND rcrapp1_curr_rec_ind = 'Y'
      AND rcrapp1_seq_no = rcresar_seq_no
      AND spriden_pidm = rcresar_pidm
      AND rcrapp1_pidm = rcresar_pidm
      AND spriden_change_ind IS NULL
  )
  SELECT    sub_q.*,
            CASE
                WHEN acg_elig_comm_code = '268' THEN 'Rigorous HS course'
                WHEN acg_elig_comm_code = '269' THEN '2 or more AP or IB'
                WHEN acg_elig_comm_code = '270' THEN 'ACG possible'
            END comm_code_description
  FROM      sub_q
  ORDER BY  name
  

  Furthermore, you might think to rearrange your table, so that you do not have 10 columns (rcresar_comm_code_01, rcresar_comm_code_02,...) that essentially do the same thing. The usual way to handle this kind of one-to-many relationship is to have all rcresar_comm_codes in a separate table, one per line, with a pointer to the table where you have them now.

  Published by: Frank Kulash, January 20, 2009 11:35
  Syntax error has been corrected

• Clarification of the SQL query in 2 day + Guide APEX

  I worked through the Oracle Database Express Edition 2 day + Application Express Developer's Guide, and try to decipher the SQL query in Chapter 4 (building your app).

  The code is:

  SELECT d.DEPARTMENT_ID,

  d.DEPARTMENT_NAME,

  (select count (*) from oehr_employees where department_id = d.department_id)

  "Number of employees", he said.

  substr (e.first_name, 1, 1) |'. ' || Select 'Name Manager',

  c.COUNTRY_NAME 'place '.

  OEHR_DEPARTMENTS d,

  E OEHR_EMPLOYEES

  OEHR_LOCATIONS l,

  C OEHR_COUNTRIES

  WHERE d.LOCATION_ID = l.LOCATION_ID

  AND l.COUNTRY_ID = c.COUNTRY_ID

  AND e.department_id = d.DEPARTMENT_ID

  AND d.manager_id = e.employee_id

  AND instr (superior (d.department_name), superior (nvl (:P2_REPORT_SEARCH,d.department_name))) > 0)

  I don't know exactly what is happening in the last line. I think I understand what the different functions but I'm not clear on the use of the: P2_REPORT_SEARCH string.

  What does this string? This code simply checking that d.department_name isn't NA?

  I have SQL experience but am not very familiar with the Oracle PL/SQL implementation. Can someone please give me a brief breakdown that check is doing in the context of the overall query? The application seems to work even if the conditional statement is not included.

  Thank you.

  2899145 wrote:

  Thanks for the reply. I apologize if the information I added was incomplete. The code came from the day 2 + Application Express (version 4.2) Developer Guide.

  In the section 'your own Application of 4 Buuilding' https://docs.oracle.com/cd/E37097_01/doc.42/e35122/build_app.htm#TDPAX04000 , they describe the creation of a report

  page that includes the "manager_id" and 'location_id '. The SQL query, I pasted above extracted from the data in other tables to substitute the real 'name of the Manager' and 'rent '.

  for the corresponding ID values. It makes sense, and the part of the SQL query that explicitly doing this makes sense.

  However, given that the document is a guide for the development of the APEX, I guess the command:

  AND instr (upper (d.department_name), upper (nvl (:P2_REPORT_SEARCH,d.department_name))) > 0

  done something valuable, and I do not recognize what is exactly the value.

  From a practical point of view why would I need to include this conditional statement?  Which only added to the application?

  Looking at the guide in question, it is clear that the

  AND instr(upper(d.department_name),upper(nvl(:P2_REPORT_SEARCH,d.department_name)))>0
  

  the line is completely unnecessary in the context of this tutorial, and it can be removed. The search in the tutorial app page is implemented by using a report filter interactive rather than a P2_REPORT_SEARCH element, which does not seem to exist at all. (It's a quirk of the APEX that bind variable references to non-existent items are replaced with NULL silently rather than exceptions). I thought that perhaps it would be legacy code a version of the tutorial prior to the introduction of interactive reports at the APEX 3.1, but I can't find explicit instructions to create such an element of filter in the 3.0 tutorial. I guess it must have been automatically generated by the application wizard when you create a standard report page.

  If you do not want to see the effect he would have (as described in the post above), leave it in the source report, add a text element of P2_REPORT_SEARCH, and a button "submit" on page 2 and experimenting to find different values of the element and clicking on the submit button...

• Failed to parse the SQL query by user

  Hi all
  
  in my application, I have a piece of text with a button "submit". In this article, I type a name and a report after the element region show me the result (s). This works for all my users (> 2000) perfectly, but that users become an error in the area of the report:
  
  Failed to parse the SQL query:
  ORA-01403: no data found
  
  We try this with the same searchstring on the same computer/browser. If I connected the result is ok, if the logged on user, the error message appears. If I try this on the user's computer with me connected, ok result. If the user try this on another pc, error results.
  
  I have a production and a developer workspace. In the developer workspace the user can try this perfectly without errors. That in the space of productive work, clear the error.
  
  The SQL-Select in the ist verry simple reprirt:
  
  Select id
  name
  raum
  table
  where instr (upper (name), upper (:P60_SEARCH)) > 0
  
  However, all users can use this search box with report perfectly, only this one user has the error. There is no restrictions on this point or a State.
  
  Can someone help me?

  Hi Carsten,

  I don't think that there is a way to do it.

  Could you please mark the correct and useful answers in this thread? Otherwise I'll never get near Andy ;) :)

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

• Dependencies of object database by using the SQL query?

  Hi guys,.

  I just see the nice feature to discover the database object dependencies in the APEX (generator application-> app 123-> utilities-> database object dependencies).

  Is there a way to get this dependencies just with a SQL query? Also should I calculate a process in order to get the current dependencies? In APEX, you press a calculate button before you can see the dependencies.

  Thanks in advance and greetings from the Germany

  Steven

  After you import the app Builder application APEX 4500, I saw that the Start button the following process:

  wwv_flow_theme_manager.find_object_dependencies (p_flow_id =>: fb_flow_id, p_page_id-online null);

  In my example I can't use it, only the APEX_050000 user has privileges to use, and you must grant the privileges of your schema, so if you want to use it inside your application. My application must be independent of the schema and the specific database.

  Also it is not recommended to use this procedure because it is one of the procedures not supported that are only used by oracle.