Repository migration to a secondary server in clustered environment

Similar Questions

• Common cause of failure of the Mirage server in clustered environment and how customers will be switched to the other server in a cluster

  Hello

  Can someone share me information about common cause of failure of the Mirage server in clustered environment.

  And how customers will be switched to the other server in a cluster to continue their operations from the server failed.

  Kind regards

  C Bathesha

  In general, Mirage servers are not lacking. It is very rare (and not, for example, to problems of storage or endpoitns, which are more common).

  May raise problems of overload, memory or hardware malfunction too little.

  After that you make server standard troubleshooting (the etc system event log), you must file a Service request by VMware.

• application server oracle migration to a new server with SSO

  Application server: 10.1
  repository database: 9.2.0.6
  
  Old OS: Tru 64
  New operating system: Solaris
  
  We just want to migrate to the new server. We're not modernize our versions of oracle. We continue to get username / password is wrong when we try to use single sign on with the new repository. When contact us the Oracle support we work around the race. They are simple and there is no documentary research he actually did this or knows how to do a migration.
  
  Is someone did a migration of the repository with single sign on? What metalink document did you use?
  Is it possible to simply export/import data?

  you might be falling into this scenario.
  the version of your database is the same, you have found the similar error stack, on executing the script of ssomig.bat even.

  Please see this note on Metalink2: Doc ID: 430523.1

  '' Cause. ''

  The 10.1.2.02 standards body. ssomig script uses the import/export utilities in its $ORACLE_HOME, 10.1.x. The SSOMIG script assumes that the metadata repository database is a version that uses the same current version of SSO import/export utility. In your case, this is not true.

  This causes a problem when the source repository of metadata is 9.2 versions. In a database import/export utility perspective, this is an unsupported configuration, a newer version of export cannot be enforced against an earlier version of the database. An earlier version of export can only be run on a later version of the database. It is documented in the Guide of the database utilities.

  Solution
  To implement the solution, please perform the following steps:

  On the source server
  1. run the House against the 9.2.x 101202 fight database catexp.sql.
  2 copy files/directories SSO and Perl 101202 House Home 9207
  3. run the ssomig-export of 9207 House
  4 copy the ssomig.dmp resulting and the ssoconf.log to the SSO target
  5. run ssomig - import.
  "

  ******************************

  If that does not solve your problem, then look in this note.
  DOC - ID: 372328.1

  AMN

• My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

  My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

  If there is no email from the old account that you want to keep, move them in local directories first.
  Tools > accounts settings
  OR
  Right click on the email account in the fodler pane, and then select "settings".

  Select the account you want to delete.
  Click on "Actions account."
  Select 'delete account '.
  Click OK

  See the image as an aid:

• I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost.

  original title: robocopy

  I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost. So far, that's what I did, I used \\server1\share \\server2\share/sec /mir robocopy and robocopy \\server1\share \\serve2\share/e/s /copyall. It seams like they copied all files with the permissions of the user for the files, but not files. For example, if a user makes a folder with the files in the folder appear them have permissions appropriate for them but not the root folder or subfolders, they did... How can I fix this and what is the difference between / s /mir and/e/s /copyall?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Can I use ASM / ME to windows server 2012 file server failover clustering?

  Hi all

  Can I use ASM / ME to windows server 2012 file server failover clustering?

  We can use it with exchange, sql, sharepoint,..., but I can't find any document for file server.

  Thank you.

  HIT / working ME with CSV W2K12/R2, W2K8 CSV volumes cannot bear not to cancel the MAPPING is the main difference.  But HITTING / will allow ME to create the active copies and replicas of volumes CSV

  Yes the cluster file shares are supported with SUCCESS / me.    If you think about it, SQL, Exchange are indeed a "sharing".   Because it is an NTFS volume with services that run against her.  SQL, Exchange or fileshare services.

• ACS 5.7 - access to tracking and reporting on a secondary server to the primary server

  My organization has an ACS deployment, consisting of three servers. Currently, the primary ACS server is also the newspaper collector. However, Cisco recommends to a secondary server in the log collector.

  I noticed that I have connection on the secondary server and click on "Monitoring and reporting", I am prompted to connect to the main server because that's where newspapers. I guess if the newspaper collector is on the secondary server and I click on "Monitoring and reporting" of the main server, I will ask you to connect to the secondary server.

  Is there a way of not having to connect twice (once to access the web interface and new access reports)? It seems that deployment of ACS should support a kind of function of single sign-on and once you are connected to a server, gives you access to another without having to log in again.

  Hi David,

  I know that the Cisco documentation mentions the school be the best practical paper collector, however, which in fact means is that the server acting as collector of newspaper should be not authenticate users.

  If your backend is the collector of newspaper that should be fine, as soon as it's not authenticate users (but secondary responds to this task).

  And related to the shift, that of right, independently on the server to which you connect, once you click on "Monitoring and reporting" you will be redirected to the collector of the newspaper and need to connect in it, unless you are currently on the newspaper collector and click on 'tracking and reports.

  SSO between servers would be a good thing but is not available.

  Note: Please mark as answer as appropriate

• Secure ACS 5.7 - adding a secondary server to the primary

  Hello.

  I recently set up two servers Secure ACS 5.7 primary. I want to make one of the main servers a secondary server. When I try to register at the elementary level, I get the following message:

  This failure has occurred: save failed due to invalid certificate. Your changes have not been saved.

  Both servers have valid certificates. But other that to extend the validity of the cert, no other changes have been made.

  Any ideas please?

  Thank you

  Daniel

  Hello Daniel,.

  For the communication of trust option work. It is necessary to use certificates signed by one or the other it external or internal, and add to it, you must import the transmitter respective root/intermediate cases under "users and storage of identity > section"Certificate authorities"on both ACS servers.»

  Alternatively, you can choose not not to use the feature "Trust communication" by going in "System Administration > Configuration > global system Options > Trust Communication Settings." and uncheck the check box for the feature.

  Note: Please mark responded as appropriate.

  Note

  Note

• Java for the secondary server of Iaas

  By using the Installation Wizard, why doesn't the spell prereq check java for the secondary server to Iaas? What is the purpose of the java is used?

  • Secondary server of Iaas (inf-1)

  

  • Iaas (inf-2) backend

  

  • Server roles

  

  Kind regards

  Hello

  Yes you are right, and referring to the document correct when it come to the installation of JRE to vRA is a sine qua non for IaaS, so as it can support the deployment of MS SQL, so we need to install java on the machine hosting the web component rather than the external machine working with MS SQL.

  Rgds

  Frédéric

• The steps required to perform a migration to a new server vCenter using distributed switches?

  We are currently on version 5.1 of vCenter and ESXi 5.1 on all our guests.  We use a vDS on our current server vCenter and will need to migrate to a new server vCenter soon.  Is there a documentation about the steps to migrate to a new server vCenter using switches distributed?  We hope to achieve this goal without any downtime.  The problem is that we need that VDS on our 10GB network for the aggregation of links.  If having to migrate guests at standard switches before moving them to the new vCenter server, there will be problems of network performance.

  Because information about your environment are stored in the database of vcenter al you should just be able to stand up the new vCenter server and that it points to the existing database

• Questions about vCSHB 6.5.1 (LAN or WAN and physical vs. virtual secondary server)

  Hello

  I have a few questions about vCSHB 6.5.1:

  1) there are two sets of installation guides: one for secondary physical server and a secondary server.

  What are the main differences between these two scenarios?

  (2) for vCSHB, there are two deployment options: LAN and WAN

  2 (a) which option is most common?

  2 (b) If an option (for example, LAN) works in an environment, can I assume that the other would work as well?
  And what a difference these two options?

  (3) is vCSHB backward compatible? VCSHB 6.5.1 works in an environment where an earlier version (for example vCSHB 6.4) works?

  (4) what version of vCSHB (e.g. vCSHB 6.5 or 6.4 and 6.3) is widely deployed today?

  Thank you.

  (1) there should be nominal differences - what is different is discussed the virtual network set up against the physical network implemented

  2 (a), in my experience LAN configuration is more common because it over a high availability solution oppesed to DR.

  2 (b) not necessarily, you should make sure that the appropriate ports are open

  (3) I think it is but you have to bring everything up to a compatible version as a best practice

  (4) I'd go with the latest version as it has been out for a few weeks-

• Problem of migration: SQL to Oracle Server

  Windows 2008
  Oracle 11.2.0.2
  
  I'm migration of database sql server 2005 to Oracle 11 g. I have migrated without error, but when I compare the two system tables, I'm getting inconsistent County. Majority of the tables are consistent, but two or three are this inconsistent numbers, including the example below.
  
  Example:
  
  Oracle-
  Select count (*) in the tblcasefile;
  
  I get 3770 counties
  
  SQL Server-
  
  Select count (*) in tblcasefile:
  
  I get 3803 counties
  
  Any idea to get out of here?

  When you validate, code, ddl or output, please surround the noformat}

  {noformat} tags to make it easier to read. It should look like this:
  

  SQL > tblcasefile desc;
  >

  Name Null? Type
  ----------------------------------------- -------- -------------------

  AUTONUMBER NOT NULL NUMBER (10)
  CASENUMBER NOT NULL NUMBER (10)
  OLDCASENUMBER NUMBER (10)
  DATE_OF_INCIDENT VARCHAR2 (24 CHAR)
  DATE OF DATE_INITIALLY_REPORTED
  REPORTED_TO VARCHAR2 (255 CHAR)
  REPORTED_TO_POSITION VARCHAR2 (100 CHAR)
  DATE OF DATE_REPORTED_TO_BOARD

• Windows Server 2008 clustering

  I'm testing Windows Server 2008 shared help cluster on an IBM SAN ds4500 storage. Two RAW LUNS are used as storage shared on both Windows 2008 servers. When I run a test of validation in the context of implementing a cluster I ger errors on validation of the disc. So no disks are found which are suitable for the Server 2008 clustering. The error in the log is:

  "LSI adapter, Ultra320 SCSI 2000 series, bus type w/1020/1030 fake disk doesn't support clustering. Disk partition style is MBR. Partition of disk type is BASIC. »

  If I add the same two LUN RAW for Windows Server 2003 clustering they are valid drives presnted to set the cluster.

  VMware esx 3.5 update 2 has a support for setting up clustering 2008?

  Thank you

  R

  Hello

  You need two things win2k8 MSCS support

  (1) SCSI-3 persistent reservation

  (2) virtual SAS device

  These two are not yet supported on 3.5.

  Thank you

  Samir

• How to migrate a virtual VC server to another host ESX with different CPU ID

  Hello

  by updating my equipment VI 3.5 of old AMD Single Core of AMD Quad-Core a problem has occurred: the new CPU´s of course have a different CPU - ID, so it is not possible to do a live migration of my virtual server VC from the old machine to the new one.

  A migration cold is of course not possible, because after the stop server vc I ve no connection via VC Management Console... of course

  How can I get my VC-virtual server running on new hardware, I guess that there must be a solution and I hope I m not the only one, who runs a virtual VC server and must change the material

  I look forward to any possible solution, thank you very much.

  Heinz Kabisch

  If the VCVM is on the only shared storage remove the virtual machine from the old host and enter it on the new host by connecting the VI client to each host. TO register to browse the store of data and right click the .vmx file and click Save

  If not on the shared storage (but I hope it is) you can copy the files from the virtual machine (*.vmdk and.) VMX file) from one host to another using the SCP. Then connect to the new host using the VI client and enter the VM VC

• Server 2008 Clustering in ESX 3.5 Update 3

  I see it in the release notes for update 3 that Server 2008 clustering is not yet supported. We have a development environment that we would like to build clusters 2008 for test purposes (no production). In addition, our dev farm is boot-from-SAN. Did somebody get 2008 clustering to work?

  As an alternative, VMware Server would work for this? We try to avoid the cost of physical boxes and storage shared for clustering testing 2008. Yet once, it will not be a production workload. Thanks in advance.

  They're waiting for you, Gordon... in the test Chamber...

  I got a 64 bit 2008 Enterprise cluster successfully on 3 update configured, with iSCSI volumes connected Microsoft like shared disk (only players to start the virtual machines are on VMFS, also on a SAN-based data store). Have had no issues at all, even when rapid vMotioning of VMs cluster node (which are given 8 GB of RAM a piece) during periods of IO reasonably heavy.

  Hope that helps! Please, help me by marking my response as "useful" or "correct", if you feel it is useful!

  -Amit