Windows Server 2008 clustering

Similar Questions

• ESXi 4.0 supports Windows Server 2008 Clustering?

  Hello

  Does anyone know if the Clustering Windows 2008 Server (MSCS) is officially supported in ESXi 4.0?  If this isn't the case, someone has suggestions on how to configure it to a production environment by using third-party tools?

  Thank you

  Andrew

  Yes.

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_mscs.PDF

• Clustering Windows Server 2008 and the STORport driver

  Hi all

  I recently read on the documentation for "Setup for Microsoft Clustering and Microsoft Cluster Service".  It says to use the LSI Logic STORport drivers with Windows Server 2008 clustering, instead of SCSIport drivers. I can't find the STORport drivers anywhere.  I can't find this on the LSI Logic's Web site.

  TIA

  -Rick

  See the site of LSI:

  http://www.LSI.com/storage_home/products_home/host_bus_adapters/scsi_hbas/lsi20320r/index.html

  André

• Windows Server 2008 R2 Network Load Balance question

  Hello

  I got my hooked VMs when a network load balancing in Windows Server 2008 R2 clustering.

  This only happens for Windows Server 2008 R2, Windows Server 2008 with SP2 is OK.

  And I use VMware ESXi 4, I don't know if this has been addressed in ESXi 4 U1.

  Can someone give some advice?

  Thank you very much

  I would try the update 1 - it correctly supports Windows 2008 R2 x 64, where like esxi4 don't...

• Windows Server 2008 cluster

  I try to create a cluster Windows Server 2008 based on VMware Server 1.x to test pure and training purposes.

  In the past, I was able to create clusters based on Windows Server 2003 by applying all this as described in Chapter 7 of the "Management Guide - VMware Server 1.0".

  Is there something different I should all by creating a Windows Server 2008-based cluster?

  Concerning

  Marius

  According to VMware Server 2 documentation, with 2008 MSCS is not supported.  MSCS 2008 is not built to support parallel SCSI as a shared bus type.

  http://social.technet.Microsoft.com/forums/en-us/winserverClustering/thread/7fef628a-C910-414F-A7EA-0bda933b3d8d

  Here's an option:

  "You can create a 3 W2K8 node without any additional storage cluster using VM server or workstation. I use Wokstation 6. Without shared storage, you cannot do much. You can also configure 2 cluster nodes in VMware environment, but you'll need a shared drive that supports SCSI-3 persistent reservation commands. I use iSCSI storage attached to 2 knots. »

• Pavilion c 500-467: windows server 2008 display driver

  I am running Windows Server 2008R2 64 bit on a pavilion with a HP2509m monitor 500-467c. Which shows the driver works with this combination of material? I see Windows 7, 8 and 10 64-bit on the driver list, but not Windows Server 2008.  Help please!

  Hello:

  You want to try the W7 64 bit drivers for 2008 Server R2.

  Try to install the drivers manually if automatic installation method does not work.

• Definitions for Windows Server 2008

  Hello!
  I was looking for definitions of toshiba for windows server 2008, and then I realized that there are no definitions for windows server 2008.

  So if someone knows how to fix this please let me know.

  You are right. Support Toshiba doesn t Windows Server 2008 and as a result you will not be able to find any Toshiba statement associated with this OS.

• WLAN on Satellite L505-10Z PSLS3E with Windows Server 2008

  I have Toshiba Satellite L505 - 10Z PSLS3E on Windows Server 2008 and to install the WiFi driver but can't find the right installation files and I downloaded the Vista driver installation and the driver may be installed on the right but when I try to connect to wireless networks, I have * NO * CAN find any available networks despite many networks on my area.

  What can I do?

  EH it's always difficult to find drivers for unsupported operating systems.
  Your Satellite L505-10Z network card wireless Realtek 802.11 g (RTL8187B) inside, then you can try to search for the driver on the manufacturer's support page.

• Satellite A505-S6004 - unknown device on Windows Server 2008 R2 64 bit

  I'm trying to install Windows Server 2008 R2 64-bit on an A505-S6004 (initially Windows 7 Home Premium) to a new disk. After downloading and installing many drivers for Windows 7 and install Toshiba Web site, I have two things left in the device manager that I don't know what to do for them.
  The info is under another devices basic device PCI System Bus 3, device 0, Function1 and..., function2.

  Any ideas what this can be?

  Thank you for your comments!

  If you are looking for drivers or unknown devices anytime, once again, that could be useful:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=208721&]

• HP Deskjet Adv 2060: Driver for HP Deskjet Adv 2060 for Windows Server 2008 x 64. ?

  Hello

  I have a desktop PC remotely with Windows Server 2008 x 64.

  I tried and still can't get a driver for my HP Deskjet Adv 2060, so I can't print in my house.
  
  May I ask if there is a compatible driver for HP Deskjet Adv 2060 for Windows Server 2008 x 64. ?

  Thank you very much.

  Ryan

  Hey Ryan,

  This kind of low printers end support client operating systems only, it supports all print server OS or Citrix or RDP.

  You can find the printer specifications below, only the operating system on the system Rquiredments are supported:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-3183-all-in-one-printer-series---K1/4157434/model/4157334/document/c02063036/

  Kind regards

  Shlomi

• HP Pavilion p7-1451 USB 3.0 and Bluetooth drivers for Windows Server 2008 R2

  I bought a HP Pavilion p7-1451 so I might have a machine that is affordable, yet powerful enough to put a server software development environment on (I'm a software engineer).

  It came with Windows 8, but I need Windows Server 2008 R2, I own through an MSDN subscription.  I did what I always do in these cases, re-partioned the hard drive, re-formatted and installed the new operating system.

  I have almost all devices work fine, but it still does not recognize the USB 3.0 ports and Bluetooth device.  I looked everywhere but could not find something that works.  Whatever it either from the HP site is targeted for Windows 7 or 8 and trying one of those, it tells me "your system does not meet the requirements of the operating system" and MSI publishes all the drivers for this particular motherboard (that I can find anyway).

  Motherboard: MSI MS-7778, also known under the name of: MSI 2AEO version 1.0

  BIOS: FRIEND 8.12

  Here is the list of "other devices" in Device Manager that Windows does not recognize:

  BCM20702A0

  (USB) Universal Serial Bus controller

  (USB) Universal Serial Bus controller

  Bluetooth device ID: USB\VID_0A5C & PID_21F1 & REV_0012

  USB Controller device ID: PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03

  Windows doesn't always recognize them after allowing him to look on the internet.

  I googled everywhere and I'm not getting anywhere.

  Does anyone have advice?

  Any chance that this could be linked to the BIOS?

  I'm not having any chance to find a BIOS download for this motherboard either.

  Any help is very appreciated!

  Find out!

  Use your expertise in software engineering to mod the driver for USB 3.0 to work...

  Look at the last post on the thread. You need to mod the text file... replace NTamd64.6.1.1 with NTamd64.6.1

  http://forums.AMD.com/game/messageview.cfm?CATID=454 & ThreadID = 163739

• LAN driver for Satellite L505 - 10Z PSLS3E on Windows Server 2008

  Hello world

  We hope to find a solution for my case.

  I have Toshiba Notebook (PSLS3E-L505-10Z) and installed Windows server 2008 on it, but I can't find the driver Lan for this OS. Could guide you please solve me this problem, because I lost a lot of time to research on the toshiba Web site and with no valid result realtek Web site.

  Thank you

  Hello

  Windows Server 2008 is based on a Vista/Win 7 OS.
  It s like the same situation 5 years ago. Win 2003 server was based on Win XP and all the drivers Win XP are compatible with Win 2003 server.

  If you are using Windows Server 2008, then you should try the Vista/Win 7 drivers!

  Good bye

• Setting up OS x server as a replica of MS-Windows server 2008 or 2012

  Hi people,

  Our company has an environment Active directory on windows server 2008 and server running in 2012. We recently bought a mac server to push profiles settings and updates to iOS and OS x equipment.

  When I try to configure the mac server to join a domain open directory existing as a replica of the windows server 2008 or 2012, it gives an error of incompatibility. He says: ' your server cannot become a replica of the 'example.com' because they run a no compatible version of Mac OS X. Please consult the Guide of Administration Open Directory for more information about this compatibility matrix.

  Anyone can suggest me what am doing wrong or what should I do?

  Thank you

  Rohit

  You can read in this article how to solve your problem with a domain Windows and Open Directory of a Mac

  If we need more information, do not hesitate to ask

  Leo

• Activation of Windows Server 2008 by using the button R2

  I can't activate Windows Server 2008 using the originally shipped with the X 3650 M3 server activation key. The media are labbled than Windows Server 2008 R2. Is that the key to R2 cannot be used for windows Server 2008 32-bit. I appreciate your response. Thank you

  You will need to contact your business partner where the system was purchased to to solve this problem.

• Qosmio F30 audio driver for Windows Server 2008

  I'm only running a virtual machine with Windows Server 2008 installed. The server sees my Sound Driver, but it does not recognize it and ask for driver all the time. I tried running the installer of Sound Driver from the CD, but it didn't work, said: not supported operating system. I tried a driver all over the web and I found none. Can someone help to find this driver for me or let me know it it is possible to manually install this driver?

  I will be grateful for any help.

  As you probably know that Qosmio F30 is not designed to be used as a server and general support Toshiba doesn t Server2008. All you can do is to identify the manufacturer of the sound card and try to find the driver on its support page.

  Boyfriend sorry but that s all I can say about it.