Representations of Terminal and wire

Similar Questions

• How does "create and wire case unwired? I can't do anything...

  OK, I have a structure with a ton of events of the event.

  I just added a value that passes through IT. This value is a shift on the outside loop register.

  I see that when your right click the tunnel on the event... There is the switch to turn off 'Use Default if not wired'.

  I also see some options that seem to be doing what I want to do... and that's for cable all unwired connections on the other events with "Entry Tunnels Linkted"-> "create and wire Unwired case."

  When I click on it, the cursor changes to a new form... but here... I can't figure out how to make it work... I tried to do a right-click on the tunnel 'broken' for this purpose... I tried a left click in an event that is unwired... but nothing.

  Can someone help me out here... I think that's what I want... but can't make it work.

  Thank you in advance,

  Cayenne

  After clicking on create and thread, click on the terminal across the structure you want to feed the exit tunnel.  If it is already wired directly to the other tunnel, he'll know what you mean without the extra step to choose the side of the entrance.

• Discussion using cisco termination and SSL inspection technology

  I want to know what options there in cisco for the following scenario platforms

  ", We are looking to update the infra, which currently houses a GNU / linux works as reverse proxy and dry mod that performs application-layer inspection."  The box rechiffre later traffic when he leaves the box which will be sent to the real target server. So, this one is set to complete termination and inspection of two traffic.

  The new material, we are looking for must have an option which is equivalent to the goal (termination and inspection) but attack itself improved in terms of high-end dry performance and gives more coverage.

  If the requirements are to:-

  • termination and inspection on a single box (preferred)
  • provides the ability to cover broad attack for Layer 7 traffic
  • Ideally, all units involved in the solution be CISCO.

  Please let me know if more explanation is needed, and how I can improve my question if necessary.

  Thank you.

  In both cases, the Cisco products use a trusted certificate issued by a certification authority private to terminate SSL sessions requested by customers. He rechiffre the flow during his visit to the target servers.

• I can't import any type of video file in the sequence, it represents imports video and audio. Please help me I am unable to work and I have clients waiting!

  I can't import any type of video file in the sequence, it represents imports video and audio. Please help me I am unable to work and I have clients waiting!

  Wild guess: I forgot to patch source the video track.

• Please explain, "property of the disc is needed. I use a USB key without anything on it to lose, to try to 'repair the disc' in the Terminal and can not go beyond the question of ownership.

  I read what I can find the performance of 'diskutil' in a Terminal. I could check my volume internal boot OK. When I mounted a USB without a title with nothing on them to lose and tried to run "diskutil repairVolume /Volumes/ Untitled" Terminal said ms 'ownership of the disc is necessary. " It left me speechless. I would be grateful some lights. I'm just trying to learn to do. Thank you.

  If you cannot use the disk utility to fix it, run the following in the Terminal:

  sudo chown $UID/Volumes/Untitled /.

  or:

  sudo diskutil repairVolume/Volumes/Untitled /.

  In both cases, you will be asked your password. Nothing appears in the field as you type it.

  (139688)

• my cursor freezes terminal and I can not enter password

  attempts to load the pods of cocoa on my mac book pro 10.10.5 using terminal. When you are prompted for the password, the cursor has a point inside and doesn't let me do anything

  Passwords in the Terminal, by their design, are NOT included.

  Just typing away and press return. If it is correct, it will undertake, and otherwise he will yell at you.

• Configuration of input DAQmx terminal and choice of the sample mode

  Hello

  I'm studying 'Timing and synchronization features of NOR-DAQmx' from the following link,.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4322

  Pourrait
  someone tell me how to Figure 2, input terminal in configuration
  the part "DAQmx virtual channel creat? Shoud I double-click
  the icon to change it? Or there is a way I can show in the
  Block diagram as the sample in the DAQmx part mode?

  One
  more question, in the DAQmx calendar part, how can I put continues «»
  "" "Samples" here? It comes from the function palette? Thank you.

  No, you do not double click on the icon to change it. To answer these two questions, just right click on the device and select ' Create > constant "."

  It comes to LabVIEW basics. I would recommend that you study only here before you start experimenting with DAQmx.

• is the power connector of 9642XT NI SBRIO J3 negative terminal internally connected to Terminal and mounting holes

  I have a SBRIO system with an isolated supply

  http://www.NI.com/PDF/manuals/375052c.PDF

  It is said on page 15, all connections of Earth GND D AI, AO, connected internally to the earth terminal.

  the negative terminal of the power of the J3 connector is also grounded internally?

  I have a system mounted on a box aluminuim, which owns the land on the Earth, and also the supply, which is used to power the sbrio gives voltage isolated, but now if the negative terminal of the J3 connector has an internal connection with the holes and the spade of Earth, how can I use my isolated power supply with the negative terminal is not connected to the ground its main power supply the connection output not the soil Earth domain controller.

  I can't open my system sbrio jury at that time to check directly.

  can you please help if negative - ve terminal J3 power connector is connected internally to the ground lug and mounting holes.

  Thank you

  Hi Freemason.

  I think I just you send an email in this regard, but to confirm, Yes, connector J3 is connected to earth ground in-house. You should still be able to use your power for the sbRIO.

  Best,

  Dan N

  Technical sales engineer

  National Instruments

• Can someone help me with Facebook. I received a msg saying that my account is terminated and I don't know why or who ask.

  I rec would be a msg telling me my FB acct was to be terminated. I went to all the FB help pages and couldn't find any place or anyone to answer my question of "why?" There is no confirmation for the cancellation email or anything else. I ran my McAfee security scan / AT & T and changed my password. Someone help me please to know what is happening. Is it a fake? I never have or never will abuse Facebook or any other site.

  you will need to contact Facebook.

  It is my hypothesis that the message you received was a fake, looking to scam you by providing your login information by clicking the links in the e-mail message. It is called Phishing.

  If that were true, only Facebook support can help you.

  -steve

• WWAN card and wire antennas for E7440

  I bought a couple of computers Latitude E7440 and I need to install a Verizon 4 G WWAN card in one of them. In the past I have bought from 6430U and have bought and installed used DW5800 (Novatel E362) and they worked very well, even if I had to do some monkey business to get the drivers installed.

  Now, I try to install the DW5800 (Novatel E362) of cards in the E7440. The strange thing is that there is no antenna cable to connect the WWAN card, even if it doesn't seem to be a small channel in the chassis. Antenna drivers only I see go to the Wifi card.

  I called in parts of Dell and the associate said "the list of parts shows not all antenna son so he need not". I'm pretty skeptical of this.

  The map recommended for the E7440 is the DW5808 and he indeed ports antenna on this subject. I didn't found any E7440 to sell broadband installed with network cards. Either they are not available to the general public on the Dell Web site, or maybe they simply do not exist.

  So, I'm just trying to understand what card I use and how I am supposed to connect any wireless antenna.

  I opened a case of pension guaranteed with Dell and they came out to replace the backcovers by those who would have included WWAN antennas. It turned out that the backcovers were the same as those that I had (Dell part number F9Y55) and does not include the WWAN antenna. More research indicates that the backcover G3D2K is one that includes a WWAN antenna, but it also seems to be able of E7440 the high-resolution LCD and Wi - GIG, which mine does not.

  I called Dell sales department to see what happens if I tried to buy an E7440 with WWAN and they told me that currently none of their configurations would include WWAN option, but they gave no explanation for this.

  I think the obvious answer is that at the time now by using the WWAN in the E7440 probably is not an option. If you wanted to buy that with the support of Wi - GIG you might at least find some wire antennas and could try to install one of the DW580x cards and see what is happening at your own risk.

  (Why is this double publication?)

• BlackBerry smartphone erased and lost BIS Terminal and Internet browser

  Hello world

  I wiped my "BOLD" to clean up a bit, and I have restored only databases such as the address book, tasks, options, etc.
  I seem to have lost the ability to email from installation through BIS. The e-mail configuration option has disappeared from the installation folder and the installation wizard mentions only BES.
  I also seem to have lost the Internet browser and don't have Planet 3 (to 3) and the Hotspot browser.

  Is there something else I need to do or restore to get that back?

  Thank you

  Paul

  Hello Paul.

  Try going to your button with menu options - advanced options - icon, press - host routing table - menu key - register now. See what it does. Then try to remove your battery - then replace it - all thewing of your phone to reboot.

• Execution of highlight mode prevents update of UDP data VI

  Hi all

  I worked with a VI (Labview 2012) which receives digital data from a target of RT, via UDP.  I noticed a flaw and decided to solve using the execution mode to highlight.  When I did this, the UDP data stopped to update in real time, and it only changed when I rebooted the VI.  To confirm the problem, I stripped everything except the basic UDP functionality, and VI had the same behavior.  UDP data real-time updates when running at full speed, but not refresh any when running in runtime to highlight mode.  Is it possible that delays that make the data readable human flow VI are originally from the VI to miss the UDP data?  Please notify.

  Thank you

  GSinMN

  When I wrote my last response to this thread, I have also thought about the timeout (default value 25) being a possible reason, but scrapped that.

  As far as I know, the time-out for the read/write occurs only if the buffer is full. But it seems that you don't spend so much data that it is a question...

  So a different conclusion:

  (1) execution of the host Windows VI with nail does not update the VI host more.

  (2) run the host with active highlight will update the user interface of home once.

  (3) you do not get error.

  Things you should know / you need to do:

  (a) UDP is a protocol with loss. So if the host receives all the data, it will not raise an error. He simply ignores the values. UDP does not guarantee the consistency of the data.

  (b) verify that the Read UDP function returns no data in apotheosis. I think he should get the data...

  (c) improve your error handling: include a 'GOLD' between your stop button and loop Terminal and wire from the cluster of error him. This will stop the loop in a case of mistaken more. I think this is the main reason to run the host in apotheosis...

  (d) include some waiting time in the loop. Currently, your loop time is defined by UDP read with timeout. I don't know if you really want to have 100% of the CPU to load once a lot of UDP packets arrives. If so, maybe you should go for TCP.

  hope this helps,

  Norbert

• wire Window 7 and wireless at the same time

  I was able to use both wireless and wire NIC on Dell Laptop M6600 window 7 64 bit well before, but lately the wireless is disconnected if the wire is connected.

  The without wire is connect to the router to access the internet and the wire is connected to my test unit private stand alone.

  I remember I go to Device Manager, right click on my wireless NIC card then there is an entry there for me to NOT turn off wireless when the wire is connected, but I can't find this option more.

  Help, please.
  Thank you
  Tom

  Hi thtran_usa,

  Welcome to the Microsoft community!

  From your problem description, I understand that you can not connect to the wireless network and at the same time. I'm here to help you.

  I suggest to refer to the following article and perform the steps mentioned there.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-Ult-how-to-maintain-concurrent/87f639bd-0E41-406c-AABB-7200a08514ec

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards.

• Scripting VI: inconsistent behavior of terms [] of a wire / owner

  Suppose I have the following vi:

  

  I am looking for the wire and acquire the terminals of this thread.

  The result I get is twice a terminal and once a terminal control (for indicator).

  Like this:

  

  So, the typical process to get the wire to the node is using the function of owner.

  It works with ordinary terminals, you get just the node-prefer (as a general-reference) - according to this:

  http://zone.NI.com/reference/en-XX/help/371361K-01/lvhowto/scripting_nav_wire_to_node/

  However, for the ControlTerminal, you get the diagram/TopLevelDiagram or anything that will place you put in this indicator.

  I consider this inconsistent behavior (even if it is easy to get around... it's a simple case-structure).

  What is the logic behind this?

  In fact, what exactly is the difference between a ControlTerminal and control? Has it something to do with the fact that I must always catalogued my knots when I browse a tree like this?

  

  Elements that inherit from the class of 'Control' are objects of façade. The 'ControlTerminal' class represents the terminals for these controls on the diagram.

  The extent of why end-nodes is the property of nodes and ControlTerminals are the property of diagrams, it's just the way it is.

• SCXI-1314 ground wire

  Hello

  We try to understand what position signal name to use for our ground wire. Should we attach ground wires to safety ground? Alternatively, do we even need to use the ground on a fullbridge gauge wire?

  Thank you!

  Gauges of full-bridge and load cells have usually 4-wire, Signal +, Signal-, excitement +, and excitement - these four sons are all that are needed to get a reading from the gauge.

  Connections for these sons are detailed in the manual of the SCXI-1314 module

  http://www.NI.com/PDF/manuals/322859a.PDF

  If there is a separate ground of the sensor can have a shielded cable. The reference guide for wiring here to learn more about review of termination and noise shield.

  Field guide for wiring

  http://www.NI.com/white-paper/3344/en/

  In my experience where to connect the shielding is a very debated topic, but my understanding is as follows.

  IF the sensor is grounded, connect the shield to the sensor ONLY.

  Connect the shielding to BOTH the sensor and the chassis of the device of data acquisition on the ground IF the sensor is floating.