Scripting VI: inconsistent behavior of terms [] of a wire / owner

Similar Questions

• iOS 10 Mail: moving Messages, inconsistent behavior when you tapoterez folder icon

  iPhone 6, iOS 10

  I see inconsistent behavior when I try to move a message in Mail from in the message.

  In previous versions of iOS, during playback of an e-mail message, I could tap the icon of the folder at the bottom of the messages, and which would lead to the top of the hierarchy of the folders for the email of the message account. From there on, it was just a matter of tapping on the file I want to move the message to, and he settled there the message and look back to the Inbox display (or the folder view I moved this message of).

  In iOS 10, when I hit this folder icon, two things happen: it happens the same thing I described above, or sometimes, rather than see the hierarchy of folders, I see three buttons slide up from the bottom of the screen. The top button allows me to move the message directly to a folder in my account called 'Action' I created (I don't know why he chose this particular file to the default value for this button - maybe because it is first in alphabetical order of all my folders created by the user), the second button says "Another mailbox" and when it takes me to the hierarchy of the mailbox as described above, and the third button is a Cancel button.

  I can't understand what dictates which of those two things happening. I tried again and again on a bunch of different messages. Some do happen, some do the other thing happens, and sometimes I'll have a different behavior in the message even if I try again later.

  I prefer the old way. But I could get used to the new way, if I could at least choose what default folder appears in the first box.

  Anyone else seeing this?

  Someone knows how to change the default folder in the first box of this new process?

  Thank you!

  I seem to have solved the problem on my own. I went to settings > Mail, and in the "Threading" section, I have disabled "Complete Threads."

• JavaFX Voletfractionne divider Position inconsistent behavior

  I have two StackPanes (pane1 & pane2) appears in a Voletfractionne (Voletfractionne). Position of the Voletfractionne-divisor is defined a.3 in Report Builder. The second StackPane (pane2) contains a button that also affects the position of the separator of the Voletfractionne a.3.
  
  Ceteris paribus, the expected behavior is that the two actions (setting the position of the partition in the constructor and adjusting the position of divider through action) either work or not.
  
  However, only the last actually works.
  
  Changing between the construction of the Voletfractionne and the onAction to the button? What makes obstacle to the implementation of the partition in Report Builder?
  

      StackPane pane1 = new StackPane();
      StackPane pane2 = new StackPane();
  
      final SplitPane splitPane = SplitPaneBuilder.create()
              .items(pane1, pane2)
              .dividerPositions(new double[] {.3})
              .orientation(Orientation.HORIZONTAL)
              .build();
  
      pane2.getChildren().add(ButtonBuilder.create()
              .text("Divider Position")
              .onAction(new EventHandler<ActionEvent>() {
                  @Override
                  public void handle(ActionEvent event) {
                      splitPane.setDividerPositions(.3);
                  }
              })
              .build());
  
      Scene primaryScene = SceneBuilder.create()
              .root(splitPane)
              .build();
  
      primaryStage.setScene(primaryScene);
      primaryStage.setTitle("Name");
      primaryStage.setWidth(500);
      primaryStage.setHeight(500);
      primaryStage.show();
  
      splitPane.setDividerPositions(.3);

  (see also http://stackoverflow.com/questions/15041332/javafx-divider-position-inconsistent-behaviour)

  There was a [url http://javafx-jira.kenai.com/browse/RT-17229] bug filed to do so, if it was closed with a 'cannot reproduce '. The problem seems to be that the stage size is smaller than that of its window. This causes an additional layout pass when the window appears first; the second pass of layout is considered a "resizing of the window" and therefore the position of the separation of the split pane is not respected on this pass.

  I have a couple of workarounds. (Probably the cleanest) is to define the size of the stage, instead of the size of the window:

  Scene primaryScene = SceneBuilder.create()
              .root(splitPane)
              .width(500)
              .height(500)
              .build();
  
      primaryStage.setScene(primaryScene);
      primaryStage.setTitle("Name");
      primaryStage.show();
  

  The other is to encapsulate a call to splitPane.setDividerPositions (...) in a (...) Platform.runLater. What causes the divider positions be reset after having performed the layout pass. This will be like a bit of a hack.

      Scene primaryScene = SceneBuilder.create()
              .root(splitPane)
              .build();
  
      primaryStage.setScene(primaryScene);
      primaryStage.setTitle("Name");
      primaryStage.setWidth(500);
      primaryStage.setHeight(500);
      primaryStage.show();
      Platform.runLater(new Runnable() {
        @Override
        public void run() {
          splitPane.setDividerPositions(.3);
        }
      });
  

  You might want to fill out a bug report, with your original code written as an example comprehensive and executable and RT-17229 reference.

• Inconsistent behavior of focusLost with JTable and JTree

  Swing has known problems for a long time with the cells and the loss of the thematic demonstrations in the JTables. Generally, users expect loss of focus to commit their changes rather than cancel the change. Then edit controls (for example, JTextFields) located in CellEditors should generally be listeners of update and manage focusLost() by calling cellEditor.stopCellEditing (). It is very clear.
  
  JTables to have an additional, special problem associated with a generation (or not) of focus events when moving from one cell to another cell in the same table. To do this, the code that creates the JTable needs to call table.putClientProperty ("terminateEditOnFocusLost", Boolean.TRUE). Setting this property to 'magic' on the table allows expected behaviors Assembly when moving from cell to cell.
  
  These issues are well described here: http://tips4java.wordpress.com/2008/12/12/table-stop-editing/
  
  I've set up the property of the client and the listener to focus, and they perform as expected in most cases. But I seems to have discovered a third case that is not managed by one of these two known workarounds.
  
  We have a design of the user interface master/detail where the master is a tree control and retail is the JTable of editable cells. The (master) JTree and JTable (detail) are each cashed in the JPanels which are in turn greeted in an enclosing JPanel.
  
  If I am editing within a cell and click completely outside this hierarchy - for example, in the menus of the main application bar - the focusLost() is managed and the change is committed, as you wish. And if I click anywhere in the JTable, also commits the change.
  
  But if I'm editing a cell and choose the JTree specifically, the change is aborted.
  
  I added logging for focusLost() Manager. I found that in the majority of cases, for example when clicking on menus or other completely different control bar, table.isEditing () returns TRUE for the JTable both focusLost() Manager is running. Because the change is running, the Manager is capable of broadcasting of stopCellEditing() and validate the user change.
  
  But when I click on the outside for the JTree specifically, then in focusLost() Manager I find isEditing() is WRONG - that is, the change has already been cancelled and there is no way to recover already cancelled user input. The text field focusLost Manager pointed out that 'the opposite element' (wins the focus) is a JTree control as expected.
  
  So it seems that something either the JTree or the locking hierarchy Panel made a subtle change to the behavior of the focusLost(). And therefore bypasses of modification of standard tables do not fully work in our application. And unfortunately, clicking on cells change directly in the tree turns out to be a common case in our design of the user interface. Failing to validate the edition in this case with bad consequences that should be fixed.
  
  Any suggestion would be appreciated. Note: the question is similar to related to this issue:
  
  JTree does not call focusLost on headphone
  
  but the tail wire. I concede that I'm not provide code either and he can't promise right now.
  - - -
  Jeff

  Rainmaker says:
  Right now seems to be a lot to a precise definition of the terms so I ask this question with regard to the docs.

  good start :-)

  >

  You wrote:

  invokesStopCellEditing and terminateEditOnFocusLost set up different behaviors, without overlap.

  Yes, I did, it meant and still means he

  >

  The setInvokesStopCellEditing() docs say:

  + Determines what happens when the edition is interrupted by selecting another node in the tree, a change of data of the tree, or by other means. Setting this property a value of true causes changes to be automatically saved when editing is stopped. +

  Well, your fat is your old problem: assumptions yet ;-) My focus is

  + Determines what happens when the change is interrupted by selecting another node in the tree, a change of data of the tree, or by some other means.

  And which is supported by reading on:

  
       * @param newValue true means that stopCellEditing is invoked
       *        when editing is interrupted, and data is saved; false means that
       *        cancelCellEditing is invoked, and changes are lost
  

  in the total sense: he's interrupted (whatever that means, no conclusive specification except this model or the selection change), this propterty determines whether editing is stopped or cancelled. Conversely: if it is not interrupted, the property has no effect.

  Do you mean that the part of the sentence by other means does not include loses focus? I have to disagree. Of course loses focus is a "way" to interrupt the editing.

  Nothing to accept or not: is done, it's the 'interrupt' that matters. Obviously (although without doubt) lose focus don't consider an interruption - nothing happens when moving the cursor somewhere else, neither commit nor cancel.

  So if invokesStopCellEditing is defined, and the tree loses focus, it should save your work. And that's why the invokesStopCellEditing overlap with terminateEditOnFocusLost.

  just to drive home ;-) - the item no.

  >

  Note that I stick to the definition in the docs.

  No, you interpret the doc to fit your expectations.

  I did an example code and checked the validation works when the tree loses focus.

  You should have (it's a two-liner to add to your example) - see the divergence of expectations and reality, rethink your accession ;-)

  In which case it's bugged, because the docs say it should.

  In fact, I don't think it is (as you may have guessed so read up to here ) the text doc of course is not as easy as it could be, as is unfortunately a habit running in the swing. Assuming that means it that you wait that means is a trap. My general advice is to read the documentation of the api carefully and until its end and then check against the actual behavior expectations. The advice to take it or leave it - your choice, of course.

  CU
  Jeanette

• Inconsistent behavior with find/replace Applescript

  Hello

  I am trying to add queries additional search/replace to the script by copying and pasting existing queries in the file FindChangeList.txt, then changing variables that are changed/wanted. I'm having mixed success though - sometimes I add a new query and it turns off one of the existing queries, other times I add a new query and it just doesn't work.

  Is this something to do with the copy/paste items, or are there some rules around what order the elements must be in?

  For example, it works fine:

  text {find what: 'Mobile'} {change to: "M"} {include notes: true, include master pages: true include hidden layers: true, any word: false} find the Mobile and replace them with M.

  Yet, just before it, does not work?

  text {find what: 'Business'} {change to: 'B'} {include notes: true, include master pages: true include hidden layers: true, any word: false} find businesses and replace it with B.

  We're just one copy of the other, so, what's the difference?

  I love this script and the time it saves me, but more I tinker with it more, it seems inconsistent.

  Any suggestion would be appreciated.

  See you soon

  Steve

  Files in text format, you should really use TextWrangler http://www.barebones.com/products/textwrangler/

  (or equivalent)...

  Substances

• Inconsistent behavior with Ocean Optics LabVIEW driver

  Hello

  I noticed an odd behavior when using the USB2000 Ocean Optics spectrometer. When I use the driver tools read the waveform, I get a waveform of pixels in length 2022. When I use the Ocean Optics (SprectraSuite) software I have a waveform of length 2048.

  I first noticed this problem when I was looking at the spectrum of a light source that is known to be ~ 870nm. Using the LabVIEW driver, I saw a peak at ~ 857nm, but using the Ocean Optics software, I saw a pic to 870nm as expected. Please let me know if you can give no indication to this problem. Thank you

  Gregory

  Just to be tied it on, I don't end up the front of the table of the spectrum with zeros to fill. It's certainly something that would deal with Ocean Optics (or the writer of the drivers). I do not change the driver because he could shoot me in the foot when you use one of the other patterns.

  Also, I noticed that for the USB2000 Set integration time VI, the time units are milliseconds. The USB4000 (and what is suggested by the drivers/examples) use the microseconds.

  Hope that these drivers can get an update soon!

• Inconsistent behavior of the user interface in the keywords fields

  I noticed an inconsistency in the way keywords fields are dealt with in the Web portal. I was helping a new user today, and this inconsistency really triggered her top.

  In the Article Properties > metadata Article screen, when you add a keyword or keyword internal, after typing the keyword, you can either press the tab key or the back key to 'apply' the key word.

  But in the Layout Templates Beta > mapping, when you edit a mapping rule, and you type a key word or internal keyword, hit the tab key has no effect. The key word is on the line and allows you to move to the next field, but it is not "applied" until you press the return key. This caused the user thinks that she entered the key word, when in fact she was not. Has caused about 25 minutes of troubleshooting until we understood what was going on.

  Just a heads up, hoping this gets fixed.

  I'll make sure that the team has a bug filed for this...

• The police inconsistent behavior between reflow and chrome

  After seeing the previous discussions regarding the behavior of the incompatible police caused by the text copied and pasted, containing hidden styling tags, I tried to find a way of stripping quickly on the tags.

  Customer copied text from word.

  Used special paste - text only - to place the text in Design view of Dreamweaver CC. Mode code entered and removed tags invisible. Mode code text copied and pasted into edge of reflow.

  Text in the reflow style - paragraph breaks, shift back and emboldened the topics. Saved and previewed in Chrome - still does not show "BOLD" headings (arial).

  Thus, text deleted box to reflow and repaints. Dreamweaver and copied text of the code with < p > and < br > tags as needed.

  Back to reflow and pasted into the text box. Black screen immediately and no way to do anything. Had to force quit and then restart reflow saved the project file.

  Same thing happens to repeat.

  What can I do to get the typography of reflow to preview correctly in chrome? Really frustrated by this problem.

  Thank you very much in advance for your suggestions...

  Thanks a lot for this bug. I can reproduce it on my end. I deposited it take a look at our team.

  I'll try and update if we find a solution.

• Inconsistent behavior of DML instructions pulled after the opening of a sysrefcursor

  Hello
  
  I have a question about the way that a sys_refcursor behaves when it is followed by an update performed on the line returned by the cursor. Thank you for your explanations!
  
  Problem:
  I have a procedure that returns a sys_refcursor with one line of a table corresponding to the input parameters passed. within the procedure, I first open the sys refcursor to return one row that matches the input parameter values. the following statement is a delete operation, which deletes the line just extracted by the sys_refcursor returned before the DML. On execution of the procedure, the sys_refcursor still shows the deleted row, even if the line has been removed from the corresponding table. Now, say instead of delete the line taken by the cursor, I insert a line after the sys_refcursor. In this case, even if there was no record in the table when the sys_refcursor was opened, on the execution of the procedure, the newly inserted row is returned. Finally I want to update that follows the line returned from the refcursor output. In this case, exit sys_refcursor does not return the line, even if it is updated after the cursor is opened. To summarize, sys_refcursor in the output displays the snapshot before the insertion/deletion fired on the corresponding table, while sys_refcursor in the output shows the snapshot once the update of fire on the corresponding table. Why this behavior? Can someone please explain this?
  Say the emp table has the following features:
  EMP_ID, EMP_NAME
  ---------- -------------
  Sam 101
  friend of 102
  ---------- ------------
  Case for delete: Say entry in_emp_id = 101
  
  create or replace procedure is demo (in_emp_id in number, out_data to sys_refcursor)
  Start
  Sys_refcursor open for select * from emp where emp_id = in_emp_id;
  delete from emp where emp_id = in_emp_id;
  commit;
  end;
  OUTPUT:
  EMP_ID, EMP_NAME
  ---------- -------------
  Sam 101
  
  
  
  Case with insert: Say entry in_emp_id = 102
  
  create or replace procedure is demo (in_emp_id in number, out_data to sys_refcursor)
  Start
  Sys_refcursor open for select * from emp where emp_id = in_emp_id;
  Insert into emp values(102,'john');
  Commit
  end;
  OUTPUT:
  EMP_ID, EMP_NAME
  ---------- -------------
  John 102
  
  
  Case update: tell of entry in_emp_id = 102
  
  
  create or replace procedure is demo (in_emp_id in number, out_data to sys_refcursor)
  Start
  Sys_refcursor open for select * from emp where emp_id = in_emp_id;
  Update emp set emp_id = 103 where emp_id = in_emp_id;
  commit;
  end;
  OUTPUT:
  EMP_ID, EMP_NAME
  ---------- -------------

  Hello
  You have probably made a mistake somewhere in the order of tests, I have three tests return the expected results, namely the State of the table at the time of the statement "open for".

• Inconsistent behavior of the object Curve2DPreview with YAxisScalingType

  I'm trying to draw some curves tiara with VBScript. The only tool I found is the subject of "Curve2DPreview".

  The curves are an exponential decay of voltage. When indicated on a linear scale, they look like this:

  I put a button next to the plot to change the logarithmic scale, and when I do the result is the following:

  

  Someone knows how to solve this problem and intrigue in the right position?

  More information: I have DIAdem2015, the four curves are curves of waveform.

  Thank you

  Hi franco__,

  You're right, that's not correct. The only workaround is to convert the string of waveform in an X / Y pair of channel and display this. I hope that we can fix the problem for the next version of DIAdem.

  Greetings

  Walter

• Resize windows to fit size bug - inconsistent behavior - decrease img?

  Resize windows to fit (double click on the glass magnifying in the toolbar) works very well except when I do a smaller image. If I reduce the size of the image that I have to grab and drag the window to the image - any amount of change, large, small, works-and then it works fine. I tried to change the "Windows resizes Zoom" in preferences, "Resize Windows to fit" in the header bar, and I work in mode "float all Windows." Any ideas for a fix, something to try, or is this a known bug? Thank you!

  When something weird going on in photoshop the first thing to try is resetting the prefs by keyboard or by the manual way. Read this link:

  http://forums.Adobe.com/thread/375776?TSTART=0

• Behavior of font style incompatible on the edge of reflow CC (Preview) for Windows

  Adobe Edge reflow CC Preview for Windows has a very inconsistent behavior on the font styles. Why there is no button to "BOLD" in the user interface? Why I have to type 'fat' in the text box of the dialogue weighting to have my designer text return as chrome? Why the text in a box/div style with the Italic button makes reflow but not in Chrome?

  Solved! CC of reflow of edge will allow you to copy and paste HTML Code CC (Preview) edge in a text box/span, but it displays "intelligently" only "text" you pasted. However, if the HTML code you copied includes a duration with a style, this confuses reflow and causes the very erratic behavior described above with the style of text that appears to the failure of inconsistently.

  Solution: no copy / paste something else than plain text in a text to reflow box/span.

• A script of the scheduled task vitoolkit ps

  When I run the following command, C:\WINDOWS\system32\windowspowershell\v1.0\powershell.exe - PSConsoleFile "C:\Program Files\VMware\Infrastructure\VIToolkitForWindows\vim.psc1"-"C:\VMscripts\datastore.ps1" I get these errors of command:

  The term 'Get - VC' is not recognized as a cmdlet, function, an executable program, or

  script file. Check the term and try again.

  C:\VMscripts\datastore.ps1:9 char: 7

  + Get - VC & lt; & lt; & lt; & lt; 10.8.7.17 - port 8001 - USER

  Get-Datastore: 05/12/2008-09:40:12 Get-data store, you're not curren

  TLY connected to servers. Sign in first using Connect-VIServer or one of his pseudonyms.

  C:\VMscripts\datastore.ps1:10 tank: 14

  + Get-Datastore & lt; & lt; & lt; & lt; Select Name, $gratuit, $capacity | Tri FreespaceGB, name | C

  onvertTo-Html-head $a - body "& lt; H2 & gt; VM Datastore Freespace\Capacity & lt; / H2 & gt; » | Out-F

  Island c:\VMreports\datastore.htm

  How can I fix this so my scheduled task runs?

  The cmdlet Get - VC is an alias defined in % ProgramFIles%\VMware\Infrastructure\VIToolkitForWindows\Scripts\Initialize-VIToolkitEnvironment.ps1.

  This script is run when you start the VI Toolkit prompt via the shortcut.

  You can use the cmdlet Connect-VIServer instead of Get - VC or set the alias in your profile.

• hide the password recovery catalog in script

  Hi all
  
  I wanted to know what are all the options, the community uses when it comes to hide the recovery catalog owner password? of course, when you save another DB in our environment, we use a recovery catalog and connect using the user/password@recovery_catalog in our script. so if anyone has access to read our script can find the password of the recovery catalog owner. I wanted to see what is the dose of rest of the dose of community to hide the recovery catalog password?

  What is the version of db, which we are discussing here? If its 11g, you can create the virtual catalog owners on the top of the catalog and allows to manage your db. Other than that, you can store the password in the wallet on the client side and use it without Hardcoding it.
  http://www.Oracle-base.com/articles/10G/secure-external-password-store-10gR2.php

  Aman...

• RH10. How to make home button on the toolbar and of home in the box "breadcrumbs" link to go to the same location

  (I don't know what the problem is with the editor of these days. Only choice is HTML with tags or this editor who suddenly decided to put my text in italics and not let me remove it! He already let me create line breaks. )

  I use: RoboHelp WebHelp Pro Single Source Layouts, 10 (albeit without using RoboHelp Server).

  I have five SSL, each with their own unique contents. The table of contents for each licensed module includes basic help topics.

  • Basic Help
  • Help for module 1 licensed
  • Help for module 2 license
  • Help for module 3 licensed
  • Help for module 4 licensed

  The default theme using base is "Introduction.htm. The default theme of each licensed module is the theme of introduction for this add-on.

  In the basis of the help by clicking on the button Home in the toolbar opens "Introduction.htm. By clicking on the Home link in the region of breadcrumbs, for example ""Homepage > Management Data Sources > creating a database ", also opens 'Introduction.htm'."

  In a license module, click on the home button in the toolbar opens "Introduction.htm. BUT, by clicking on the Home link in the region of breadcrumbs, for example "Homepage > analysis of the loss, opens the introductory section of the module under license." Our QA group filed a bug against this behavior. They feel that by clicking on the Home button and clicking on the link home takes you to the same place.

  All modules use a common window with a display two-pronged and all the WebHelp Pro buttons, including "home (skin: help NGP)" selected.

  They also use a common skin. The home button properties are: name of the item and the text = "Home". Links of "Introduction.htm" button, with a dependence on "Release\Core\Introduction.htm".

  Is there an easy way to achieve the results expected by the AQ, where clicking on host always opens "Introduction.htm", while authorized opening assistance always opens the introductory topic for the module? DISCLAIMER: I do not know how the script, if it is a possible solution.

  Thank you.

  
  Carol

  LOL, "all this said, the WebHelp Pro has worked quite well without HR server."

  And yet, here you ask about solving a problem, right?

  I think you should study serously ordinary passage to WebHelp. So much more than you report problems with the behavior of the toolbar buttons and the behaviour of the breadcrumbs.

  The reason is that RoboHelp Server maintains some of this aspect when you publish the content out there. So I'm not surprised to see point out you inconsistent behavior with different "modules". I guess it's an installation "merged"?

  See you soon... Rick