Representative of the long text on label with 3 points

Similar Questions

• The long text of the chain and cod file size

  In my application, I have a few static string constants that are very long. Channels will be displayed on the screen when it is administered buttons are clicked. I find that once I added these chains, cod file size has increased by 30%, which is not desirable. I expect buttons will rarely be clicked but I must have these text for display.

  Is there a better way to manage these channels so that they do not swell the cod file, for example, compress them.

  Thanks in advance.

  If you put the strings in a separate resource file as BBDeveloper suggests, you can also run them with maximum compression gzip before you add them to the project. Then after opening the file (with getResourceAsStream), wrap the input in a GZIPInputStream stream before reading.

• Divide the long text into multiple blocks of text by PARAGRAPH breaks, and not by line breaks

  I'm creating a catalog of the auction. Right now I have a long table in Word, where each line is an item in the catalog.

  I know how to place the table in InDesign and convert it to text so that each line is its own paragraph (click table > > convert table to text).

  Now, I want to run a script so that each paragraph becomes its own text box.

  I tried to use the script of Jongware mentioned on this thread (https://forums.adobe.com/thread/652308), but it breaks to the top of each LINE in its own text box, not each paragraph.

  Previously, a solution that worked for me is to manually adjust the text boxes until each paragraph is in a separate box, then use the SplitStory script to remove all the. However, the catalog has over 100 articles in there it is time consuming. Is there a way to separate each paragraph into its own text box automatically?

  Well, I guess you can set up a master page with two frames of text related to this topic.

  To keep Options (see above), choose 'Start in the new framework' rather than 'new page '.

  Create a page in the document and apply the master page.

  Then follow the first set of instructions, I gave above. For autoflowing, click inside the box of one of the blocks of text on the master page (I mean, do it on a regular page that has the master page applied; the text block should appear with a dashed line, because it is on the master page). Now, all text should flow between these two images, two images per page which gives you 1 point in each image.

• Will be the last text OCR Acrobat with colored backgrounds?

  Scanned a lot of magazines colored to put on the web, whenever Adobe highlights a new update, I hope that the OCR engine will read my text on colored backgrounds. Other OCR engines of the likes of Abbyy have no problem with that. Can someone enlighten me whether the most recent version will be OCR those documents. I currently use version X & while I like Acrobat, I don't update until this issue is sorted - a big thank you Julian

  Hi TheRousey,

  It will be good if test you yourself with your PDF file to check the result.

  OCR technology is much more developed in Acrobat ms compared to Acrobat X.

  You can install the trial version on another system Download Adobe Acrobat free trial | Acrobat Pro DC & test it.

  Kind regards
  Nicos

• [.ini files] Get the value of multiple labels with the same name

  Hello!

  In an ini.files, I need to get the value of each tag named in a certain way in a section, but unfortunately, I have 3 or 4 tags with the same name in several sections. I don't know how to retrieve these values, the program always consider that the first tag and not others, I tried to remove each tag after obtaining its values, that he did not.

  Does anyone have an idea to solve the problem?

  Thank you!

  As you can read in my last post, you must read and throw 'x' lines:

  OpenFile)

  Skip lines

  for (i = 0; i< x;="" i++)="" readline="">

  Start reading the useful lines

  ReadLine () / / read a line

  ... / / Interpret the line

  Don't forget to add a control during i/o operations of robust error and to check the end of the file.

• How do I rid the computer of a triangle with a point that transfers quickly no matter what page I'm on?

  I'm scrolling a page when the triangle will pop up - most of the time it is a triangle with a dot underneath.  He takes control of the page and accelerates downwards?  I do not think that I asked for this command, but maybe I've hit something by mistake?  Anyone know what it is and how I can remove it?

  You may scroll to the bottom of the page by using your mouse wheel.  This wheel is also a button.  If you press the scroll without turning wheel, it will click and the click may enable the functionality you describe.  To get rid of this mode, press sur-cliquez just once more on your scroll wheel.  In the future, use a lighter touch on the scroll wheel when scrolling.

  Another feature of this button...   If you are in a web browser and place your cursor over a web link and press - click the scroll wheel, so this link should open in a new browser window.

  HTH,
  JW

• I can edit the Bézier handles symmetrically with Anchor Point tool?

  In CC when using the pen tool on PC, I like the way that you press Alt and Anchor Point tool allows to modify Anchor Points and paths on the fly. But to convert an anchor point in the curve, the Bézier handles soar symmetrically compared to start but after letting go, I can only go back and modify the handles independently using this tool who loses the symmetry and therefore the sweetness in the anchor point

  Is it possible to edit the Bézier handles symmetrically using this tool after the initial conversion of the corner anchor to smooth?

  Thank you

  N °

  If you want to change the handles symmetrically, so that they are uninterrupted - direct face-to-face and the same length, you have to start over - drag - click on the anchor with the anchor Point tool.

  I don't think you should use the Alt key

  After that, assuming that both handles are uninterrupted, you can click drag with the direct Selection (white arrow) tool on the end of handles and the curve will remain smooth as handles to remain intact.

  so in short, use the direct Selection tool (press and hold Ctrl), if you want to change unilaterally, without breaking the 2 handles.

  Can be useful for checking-

  Edit > preferences > display the selection anchor > see Managing when several anchor points are selected

• Labels vs TextFields to display Long text

  I am currently using labels to display all the text in my application, and it can be very slow to load long passages of text.

  The text of loading consists of many operations += (it loads verse by verse of a XML file).  I know that if you use TextFields, you must use .append for better performance.  Am I is slowed down because there is no command adding labels?  Should you opt for using flash.text.TextField rather for better performance?

  I just tested and replaced my two fields of label with TextFields and use .appendText instead of +=.  Improving the performance I received was amazing!  By loading the long text passage (Psalm 119 of the bible for reference), the loading time has fallen more than 10 seconds at about 1-2 seconds.  It consists of about 350 operations += replaced by .appendText.

  So, looks like I found my answer.  Using TextFields and appendText is definitely the way to go.

• Problem with long texts in the column

  Hello.

  I use JDeveloper 11.1.1.7.0

  In a column in a table, I show the description text.

  Some of them are too long, and they are truncated and shown as an ellipse.

  The column and output text look like this:

  <af:column sortProperty="#{bindings.MyView3.hints.Descrip.name}"
                                                     sortable="false"
                                                     headerText="Descripción"
                                                     id="c25">
                                            <af:outputText value="#{row.Descrip}"
                                                           id="ot16"/>
                                          </af:column>
  

  So my question is: How can I configure the column, if the text is longer than the column, change line and continue (in the same cell) as many times as necessary?

  What about changing outputtext in inputtext in read-only mode?

  Example: change

  _______

  ABC...

  _______

  TO

  _______

  ABC

  DEF

  IGS

  JKL

  _______

  Thank you. Concerning

  Try to set the value of the column noWrap attribute.

  ADF RichClient API - < af:column >

• In the Pages, do GQue I move a note to end back in the main text? Simply by clicking on the footnote number is no longer seems to do anything...

  How can I move a note to end back in the main text? Simply by clicking on the footnote number is no longer seems to do anything...

  Pages ' 09 v4.3 support hypertext links have been implicitly set with notes at end of document, which led to a return to the original location of the page by double-clicking on the index value of EndNote. This feature is not enabled in any version of Pages v5, and return to the original page is a purely manual exercise.

• How to set the text of the label from a point of view to another view?

  Hello

  I have two view view home and view header.

  House view contains the list of values.

  To the poster of the header, there is Label which is a title of this provision.

  When the user click on any value in home view I want to delegate control of the header display and to set the label text of selected line as heding on the display of the header.

  First if these two finds are two page qml distinct or unique. If they are saparete pages then you must use a data model to fill the list with data. Now on the selection of a row of list

  set the property in your House like this

  property variant selectedData
  

  now onTriggered signal write this code

  selectedData = dataModel.data(indexPath)
  

  and next page push, who do you think header, you can use this property value and fetch selectedData to display header

  as

  Label{
  
  text: selectedData.title
  }
  

  and if you have only the page containing the two views

  Follow the same steps

  and in this case, ontriggered signal set the label text

  Hope this can help you

• Problem with maintaining the original text of basiceditfield even on unfocus after typing the text.

  I have a Basiceditfield with the original text. Here is the code:

  searchField = new EditField ("","", 1024, EditField.FILTER_DEFAULT | ") EditField.NO_NEWLINE)
  {
  protected void onFocus (int direction)
  {
  setLabel("");
  This.Invalidate ();
  };
  protected void onUnfocus()
  {
  setLabel ("Search");
  This.Invalidate ();
  };
  };
  searchField.setLabel ("Search");

  Text initially searchfield is "search". Onfocus his game to «» I type something in the searchfield, assumes that "ab". When the focus is removed from searchfield label has the value "Searchab". while I want to as "search". Help, please.

  on the focus, use getText, check if it is 'Search', setText to «»
  about onfocus, use getText, check whether it is "", set it to "search".
  on keyChar, use getText, check if "search, use setText for" ", and then return super.»

• Replace the string with the formatted text

  Hello all - I'm back to my beloved project...

  I want to replace a string by a TextSelction (formatted text) and began with the famous feature of Jang FindAndReplaceString.
  Since my replacement comes from another document (sourceDoc), I edited to targetDoc activeDoc and introduced a second document (sourceDoc).
  The replacePara actually comes from a stone where he had been placed to avoid switch backwards between the documents in a book (where to find and replace) and source documents. In another function, I learned that information on the table requires the sourceDoc must remain open.

  • Of course, everything works fine until I want to insert the replacelement:
    erase line 26 is the string
  • Given that I do not insert a string, I skip lines 28 and 29 and try try line 30
  • On line 30 DocumentSource is Document object and replacePare object TextSelection. However, sourceDoc.replacePara is not set and
  • (as a result?) line 31 past the current contents of the Clipboard.

  Of course, there is a fog around me... and I need some sunshine.

  function FindAndReplacePara (targetDoc, findString, sourceDoc, replacePara, loopMax) {
    var tr = new TextRange();
    var restoreTR, frame = 0, loopCounter = 0, replacementCounter = 0;
    var findParams = new PropVals();
    var firstPgf = targetDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;
    
    tr.beg.obj = tr.end.obj = firstPgf;             //  set up the starting text range as the very beginning
    tr.beg.offset = tr.end.offset = 0;              // of the flow. We'll move straight from beginning to end.
    trSaved = tr                                    // to come back after work
  
    findParams = AllocatePropVals(2);
    
    findParams[0].propIdent.num = Constants.FS_FindText;
    findParams[0].propVal.valType = Constants.FT_String;
    findParams[0].propVal.sval = findString;
    
    findParams[1].propIdent.num = Constants.FS_FindCustomizationFlags;
    findParams[1].propVal.valType = Constants.FT_Integer;
    findParams[1].propVal.ival = Constants.FF_FIND_CONSIDER_CASE;
  
    FA_errno = Constants.FE_Success;                // errno global, to be used to track the progress of the find and replace
    tr = targetDoc.Find(tr.beg, findParams);        // and do an initial find to get started.
    
    while(FA_errno === Constants.FE_Success && loopCounter++ < 2*loopMax) { //find and replace loop as long as we keep finding
      targetDoc.TextSelection = tr;                 // set up the text range to clear the original text
      targetDoc.Clear(0);                           // clear it
      
  //    targetDoc.AddText(tr.beg, replacePara);       // insert the new text at the original beginning of the text range
  //    tr.beg.offset += replacePara.length;          //  lets jimmy the text range in memory to place it directly after
      targetDoc.TextSelection = sourceDoc.replacePara;        // paste the whole replacement paragraph
      targetDoc.Paste (0);                          // <-- Current contents of clipboard is pasted !!!!
      if(FA_errno === Constants.FE_Success) {       // increment our return counter
        replacementCounter++;
      }
      FA_errno = Constants.FE_Success;              // ...  find the next instance. We'll reset FA_errno again just in case
      tr = targetDoc.Find(tr.beg, findParams);      // something screwy happened while we were replacing text.
    }
    targetDoc.ScrollToText(trSaved);                // we're done. Restore the document to it's original area of display
    return replacementCounter;
  } // --- end FindAndReplacePara
  

  Hi Klaus,

  Thanks for the explanation. I remember something like that GetTabRange of the way back. You have been quite patient and persistent with this project, indeed.

  So, as we are dealing with ranges of text here, I think that the only simple approach is to perform a copy and paste. There is no way to save a 'formatted' in a variable. The only super precise way would be to get a data structure of each text range TextItems in the sourceDoc, then meticulously recreate every element of the targetDoc. It would be very complicated, I think, so copy and paste seems the most logical. I wonder, though, if Miss me something, because I think that maybe you would have tried already so yes (?)

  In any case, I would do something like that, from line 30 of your original code sample (code untested here):

  App. ActiveDoc = sourceDoc;

  sourceDoc.TextSelection = replacePara;

  sourceDoc.Copy (0);

  App. ActiveDoc = targetDoc;

  targetDoc.Paste (0);

  ... etc.

  Does make sense, or am I barking the wrong tree, as they say?

  Russ

• Change the source file of the insert text with a script

  I'm looking for a way to replace existing-insert text in a document with the contents of another file (by reference), using scripts. I have a document c:\referer.fm, in which there is an insert text which the source file is: c:\A.fm

  I also have c:\B.fm, and now I want to change referer.fm so that is no longer the overlay of text contains the text of A.fm, but the B.fm.

  I tried this:

  var doc is app. ActiveDoc;

  var textinset is doc. FirstTiInDoc;

  var pathtosource is textinset. TiFile;

  pathtosource = "c:\B.fm";

  textinset. UpdateTextInset();

  But it does not work. I guess that the "pathtosource" parameter can be done this way. If someone knows a way to do it, I would greatly appreciate your help!

  David

  Hello David,.

  You do not manipulate the text overlay, but a copy of the file in the text box. Your "pathtosource" parameter is a local copy of the property that you read from the actual text insert.

  Try this code instead:

  var doc is app. ActiveDoc;

  var textinset is doc. FirstTiInDoc;

  textinset. TiFile "c:\\B.fm".

  Note that the backslash must be escaped with the backslash to make it work in a JavaScript string. To make your script Fail-Safe, test the name of file textinset before changing. You do not have the textinset that you expect to have, as might also be INSET text on master pages and reference. All inserts text are in a single linked list.

  Also, update the text tagging along after that changing the path may not always work, as compared to FM, last changed the file date text inset with the last time that the textinset has been updated. To force the FM to update the textinset, you must include the following line of code after changing the filename text inset:

  textinset. LastUpdate = 0;

  Then, you can call the UpdateTextInset() method and it will work.

  Good luck.

  Jang

• How to get the Horizontal Slider that aligned with the text?

  Hello

  I'm putting my horizontal sliders according to textual information, but for some reason that the alignmentbase property does not work. Any tips?

  The code that I use now:

  < s:Panel id = "ViewTracksPanel".

  title = "look a parameters.

  Width = '100% '.

  Height = "100%" >

  < s:layout >

  < s:VerticalLayout paddingLeft = paddingTop = "10" "10" paddingBottom = "10" / >

  < / s:layout >

  < s:VGroup >

  < s:HGroup gap = "30" >

  < s:RadioButton group = "{viewingtype}" id = "viewtrackHistory" label = 'History of Athletics' value = 'History' / >

  < s:RadioButton group = "{viewingtype}" id = "viewLatestLocation" label = "Current Position" value = "LatestLocation" / > <! - does not work because the accuracy of the data is not in line with precision of interval - >

  < / s:HGroup >

  < right s:HGroup = "40" >

  < mx:Text text = "track time interval: Minutes of {timeInt.value}" / > ""

  < s:Label text = "1" / >

  < stepSize minimum = "1" maximum = "1" s:HSlider = "60" id = "timeInt" width = "200" dataTipPrecision = '0' change = "timeInt_changeHandler (event)" alignmentBaseline = "ideographicBottom" / > "

  < s:Label text = "60" / >

  < s:Label / >

  < / s:HGroup >

  < s:HGroup >

  < mx:Text text = "display time interval: seconds {Speed.value}" / >

  < s:Label text = "1" / >

  < s:HGroup >

  < stepSize minimum = "1" maximum = "1" s:HSlider = "5" id = "Speed" width = "200" dataTipPrecision = '0' alignmentBaseline = "ideographicBottom"/ >

  < / s:HGroup >

  < s:Label text = "5" / >

  < / s:HGroup >

  < s:Label / >

  This translates into:

  

  As noted above, the cursor (& corresponding labels) aren't on the same 'line horizontal/position' as the mx Text (e.g. "Track time interval" but a little higher?

  I tried to put alignmentbaseline to all possible values but whithout success.

  Any advice would be great!

  Thank you.

  Maybe put the two HGroup form and form elements will have a height and can use verticalAlign set to medium or low, depending on what works.