Reproduce a sequence of operations-DIAdem

Similar Questions

• That need GG to reproduce the sequence

  Hi all

  We have sequences that create values used for the primary key. We are on the process of creation of replication between Oracle databases.

  I was going through the documentation, it contains some steps which is mainly for the initial loading of data. (Installation of Support for Oracle in Oracle Installation and Configuration Guide 12.1.2 sequences)

  My question is that I have to follow these steps for change also online synchronization? Or we can jump?

  Thank you

  Basu

  Hi Ben,

  Oracle GoldenGate supports replication of the Oracle sequences. But we must be aware of some issues, replication of sequences are supported by.

  1. change Data Capture (CDC) - synchronization of change online.

  2. the batch where the control points are not maintained.

  But it is not supported for the bottom.,.

  1. the first charges.

  2. When you configure two-way replication (bidirectional).

  That's why in the Oracle documentation, it was referred to as.,

  To support Oracle sequences, you must install some procedures database.

  These procedures supports the command FLUSH SEQUENCE of Oracle GoldenGate

  which issue you immediately after you start the Oracle GoldenGate dealt for the first time

  (usually when you perform the initial data synchronization process).

  Kind regards

  Veera

• To reproduce a sequence without using a

  I have a requirement in which I need to generate a sequence. The starting value for this sequence is dynamic and is extracted from a column named sequence_number of a xyz table.

  First of all, I have to query this table

  something like "select max (sequence_number) from xyz" and then once I get the number sequence max I use in another query, something like

  Select

  col1,

  col2,

  col3,

  COL4,

  col5 - col5 here is expected to generate my sequence starting with the max read in the above query value until the number of lines read by my query

  Of

  TABLE_NEW

  Verion is 11.2.0.1.0

  Concerning

  This is a stupid requirement.

  Don't go like that, you are going to implement a total mess that will not evolve or perform.

  Ask Tom & quot; Locking problems & quot;

• How can I reproduce a sequence by keeping all the clips as elements, rather than see it embedded with an audio track and a video track solo?

  I did a movie, happy with her. But I want to make a shorter version also. In the first how can duplicate my keep all items, instead of ending up with a sequence of nested main sequence?

  Exactly.

  Open the existing calendar, CTRL-A, CTRL-C, go to the new timeline, CTRL-V.

• How to overload a sequence?

  I want to overload the sequences TestStand operation can be overloaded in other programming languages.  By overloading, I mean I want multiple sequences with the same name and different parameters.  He appealed and enveloping the function much easier and cleaner.

  For example if I need 3 parameters for specific action, but I only have 2 and want to use the 'standard' for the 3rd parameter value, I take steps to get the third parameter inside a function with 2 parameters, and then call the function with 3 parameters.

  I put the standard quoted value because most of the time it will not be a digital fault.  It could be a piece of information obtained from a network or a field of another parameter, or anything really.

  I think you are badly understand what I'm telling you...

  The default values for common data types are:

  Boolean = False

  Digital = 0

  String =' '

  However, this is not what I am referring.  When you add a parameter to a sequence there are 4 columns: name, value, type, comment.  Under the comment of value that you put a value that you want to be the default. Let's say you have a digital set called Foo and you put 10 as value.  Now when someone puts down a call to this sequence sequence and they check the default zone for the parameter Foo the value will be 10 when he enters the subsequence.

  Edit: If you really want to try to check if the default value has been used:

  RunState.CallingStep.Module.AsSequenceCallModule.Parameters.Item (X). UseDefaultValue whre X is the index of the parameter you want to check.

  See you soon,.

• No operating system not found installing ubuntu.

  My last drive hard finally crapped out and I have not a right image recorded pictures and the docs.  So I bought a new hard drive and downloaded ubuntu then there engraved on a DVD using the available slow burning speed and it arises.  I made sure that in the BIOS that boot from the CD has been activated and the value that it is the first place to boot from and he started upward.  It starts the boot sequence and then said: output NVIDIA boot sequence |  No operating system is found.

  The BONES are burned as an ISO file and I'm out of ideas.

  Hello

  I suggest post you you ask about Ubuntu support to help on this forum. Consult the following link:

  http://UbuntuForums.org/forumdisplay.php?f=333

  Please do not hesitate to contact us if you have other questions related to Windows.

• What is the quick way to check if the battery current sequency contains nothing or not?

  Hi all

  I have switch from C++ to the labview in a short time before. I got a code written in labview 7 someone else and I am trying to change a code in my labview 2012. In the code, there are a lot of nested structures (like sequency battery, case, etc.). Some code contains 30 batteries but not all subsequences contains controls or code. Someone when I pass in a sequence, it seems empty, but some controls or code could be hiding somewhere beyond the current view. Thus, instead of zoom current sequency block, is that any quick way to identify if the block contains another type or not? Thank you.

  It is spelled "sequence".

  Make sure that autogrow is enabled for the sequence stacked so that you don't have the problem of the code hidden beyond the edges.

  Right-click on the stacked sequence and choose replace with flat sequence.  It will extend things, but how you can see all the pictures.

  Block diagram cleanup allows to get rid of more space and clean up the code.

  If you see empty images, you can right-click on the border between frames and select merge the images.  You should also do this if you have separate frames that should not be because there is already a data dependence that determines the sequence of operation.

• How can I copy a sequence and all the duplicate items?

  I make a film of learning with key issues such as text captions.

  Legend sequences consist of:

  Text that are animated independently for two titles appear one after the other, then both remain on the screen.

  Matte colour background

  A logo

  There are therefore 4 clips in each caption.

  I created each one as a separate sequence using duplicate

  So far so good.

  When I then change the text to sequence 02 it changes in all other cases.

  What I want to do is to reproduce a sequence AND all the elements in it so that the new titles are created.

  This seems very basic - can it be done?

  Create a title based on the title currently titration and then replace the old with the new title:

  Create a title based on the current title

  • In the Titler, open or select the title that you want to base a new title.

  • In the title quick properties panel, click new title based on current title .

  • In the new dialog box title, enter a name for the new title, and click OK.

  • Change the title as you want.

  • Close the module titration or save project to save the title.

    from there:

    Create and edit titles in Premiere Pro

• Double sequence first cc does not

  Hiya

  for some reason any, I'm not able to right click and reproduce a sequence in a project, I am working on - I tried other projects and its fine, but just of course that I'm working now

  any ideas would be

  see you soon

  Suresh!

  Hello

  Create a new project in the first and import your original project in this new project.

  Kind regards

  Ilyes

• Operation in the execution plan list

  Oracle 11.2.0.1
  Windows xp
  
  Kindly give me documentation link from where I can get the complete list of all the different operations that appears in a plan of execution with their details and priority / sequence of operations.
  
  Thank you.

  Hello

  I think it would have been much more useful for it if you read the link I provided and doing the job yourself, but anyway:

  (1) BITMAP INDEX C1_IND SINGLE VALUE
  (2) BITMAP INDEX C2_IND SINGLE VALUE
  (3 take a NEGATIVE 1 sign) and 2).
  (4) SINGLE C2_IND OF BITMAP INDEX VALUE
  ((5) BITMAP UNDER 4) and 3)
  (6) BITMAP INDEX C3_IND RANGE SCAN, followed by the MERGER of BITMAP
  ((7) BITMAP or 5) and 6)
  ((8) BITMAP CONVERSION TO ROWID of 7)
  (TABLE 9) ACCESS T BY INDEX ROWID, using rowid got in 8)
  (10) the results returned to the user

  Best regards
  Nikolai

• Replication sequence values of Golden Gate?

  Hi all
  
  I searched on the web and read the Golden Gate, but I found mixed answers.
  
  I try just to check, for some, it is possible to automatically reproduce the sequence values in a two-way configuration. The two databases will be identical and both will be GR 11, 2 with the latest version of GG.
  
  If it is not possible to increment automatically sequences in a bi-directional configuration, what are best practices for rest with them?
  
  One option is sequences of alternatives on each database, with the same values (for example) and an uneven values, but this requires the deployment of new sequences on two databases, something that we hoped would be supported by replication. (Yes the creation of the sequence can be supported, but the value is not incremented on the target database).
  
  Another way we thought on top of our heads is to have an insert trigger on (we only use sequences to generate surrogate keys) who will choose the database nextval target via a link db, but this seems a bit heavy.
  
  What is the best practice?

  GoldenGate forum is here:
  GoldenGate

• Capture the event of BONE

  Hello everyone

  Need to develop a Java application to listen to all user events that occur in the (initially only Windows) operating system to save some sort of record and reproduce the sequence of events below

  Someone at - it experience with something like?

  Thank you!

  Java is not language system in the first place. You may need to swich to C or C++ to resolve what your are looking for.

  Good bye

  DPT

• Say I have use a bookmark to access a web page. Subsequently I have manually delete the reference on historical Panel - also removes the current bookmark. Never happened with vn!

  Sequence of operations leading to the problem:

  !) Existing bookmark to go to the requested web page.
  (2) later, the I delete manually the reference panel historical at this bookmark - command 'delete '.
  Search 3) via the bookmark panel list some time later, I noticed that the bookmark I would have used previously was deleted. I did not went to the Bookmarks panel and deleted explicitly point. The deletion is certainly due to him removing point of reference in the history panel.

  This behavior started recently - and I think with FF for Android exit 31 or 32. Certainly is not happened with versions before clearing the historic bar on historic Panel were introduced. I am now on version 32.0.3

  Question being entered on desktop machine so 'guessed' version info irrelevant, so I've manually entered version info, etc. below...
  

  Thank you, Rob.

  HI dislexic_wobmat,

  It seems that this problem is fixed in the next version of Firefox beta.

• Why Tecra A3 does not start from CD/DVD?

  My laptop Tecra A3 does not react to the BIOS setting asking at the start of the CD/DVD.

  CD/DVD is the first place in the list of bootable devices (defined through F12 in boot sequence) the operating system starts with the HD. I have a chance to start with a bootable CD!

  The configuration is the following:

  Tip: TOSHIBA EAT10/EAT20
  BIOS: TOSHIBA V2.80 10/25/2006

  Any advice is welcome!

  Thanks in advance

  Antonio Giarrusso

  Have you tested with different CD bootable?
  Also try to start computer laptop using F12 and choose ODD as the first boot device.

  You can use ODD in Windows OS preinstalled?

• Number of VS-oriented oriented - report .tdr

  Hi all

  Me and my colleagues have a problem in reporting .tdr tiara.

  Our script does the sequence of operations:

  File loading 1)

  2 channel operations)

  (3) file save (TDM)

  Report 4) save (TDR)

  The problem is: after the calculations, if I load the TDM and then TDR, very often the curves are in the wrong order.

  For example: in the report number one, I should have, for channel 10SILL * 00AC *, in the first acceleration in the second YAxis speed, in the third movement.

  Sometimes, I find in the first movement YAxis, in the second acceleration, and perhaps, in the third, I find the speed of another channel.

  I tried to use the two PicDefByIdent = 0 and PicDefByIdent = 1 to the number facing the mode name-oriented, but it does the same.

  Is there a way to force the tiara to always charge the same channel in the same curve?

  Thanks in advance to the team of NOR.

  Hi Grg86,

  If you want to use references to string name in an existing report, you must change the reference string in the page layout.

  Report.Sheets ("Blatt 1"). Objects("2D-Axis1"). Curves2D.item (1). Shape.XChannel.Reference = "[1] / Zeit."

  "" You should find a string "[1] / [1]" and replace it with this shot "[1] / Zeit."

  Kind regards

  Philipp

  AE | NOR-Germany