Request for suspension after deployment iOS Simulator

Similar Questions

• iPhone 5 s no ring or vibrate for calls after update IOS 10

  I have a 5 s iPhone that worked perfectly for over 2 years until I've done 10 IOS updated.  Now it won't ring or vibrate for incoming calls.  It will give sound advice for all applications, but not the phone.  I checked the switch on the side, the sound settings, the mute under accessibility, do not disturb and alert by phone settings.  Everything is as it should be to have audibles.  This phone was in a box of Otter for protection since I got it.  Any ideas of what anything else I could do to fix this?  Miss me him each call unless I happen to look at the screen.

  Have you tried to change the ringtone in the sounds? Try using set a different ringtone temporarily. In addition, with the phone unlocked, press the volume buttons on the side and see what shows on the home screen. You see the volume and it does not show ring or something else? You use a custom or purchased ringtone, or a ringtone native iOS? Some people have reported problems of ringtone on various devices when you try to use the House or purchased made ringtones.

• Connection to iOS Simulator by Air for iOS parameters

  Hello

  I tried to connect a Flash AS3 document, intended for the iPhone/iPad, iOS Simulator.

  The main reason to test this way is that because of the pixel dimensions doesnot app on the computer screen.

  In the air for the parameters of the iOS, I traveled to the iiPhone Simulator.app

  After you set the path in this way, I went to the control > test movie > iOS Simulator

  The result was this error message:

  ID: framework not found UIKit

  What I am doing wrong?

  Any help is greatly appreciated.

  Try this info:

  http://helpx.Adobe.com/Flash/using/packaging-applications-air-iOS.html#main-pars_header_1

• CONTACT REQUEST FOR SPAM!

  There is a person who continues to send requests for contact after I decline and block them. They keep coming back somehow. They want to show "images". Well... I don't. So please help me to save me some bad images. What should I do?

  Hello and welcome to the Skype community.

  https://support.Skype.com/en/FAQ/FA34447/what-should-i-do-if-i-see-abusive-behavior-on-Skype

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• MAF: Applications deployed on iOS Simulator are not visible

  Hello

  I use Jdeveloper 12.1.3 for the implementation of the MAF on MAC device. I used to use Jdev 11.1.2.4 with Xcode 5.1.1 and jdk 1.6. Now, after the release of the CRG, I uninstalled Jdev 11.1.2.4, jdk 1.6 and installed Jdev 12.1.3 and jdk 1.7. Open examples of good applications that created new application also. But when it is deployed to the iOS Simulator, it gets deployed successfully but in the Simulator, no icons appear for applications. Pointers please.

  Thank you

  Ajay

  Get this job now, it seems I have to unlock device iPhone of the retina (4 inches). However, previously I was using 64-bit one.

  Not sure why it is not deploy open Simulator.

  Thank you

  AJ

• iPhone 6 problem after installing IOS 10.0.2 - phone app keeps freezing for 30 seconds

  After installing IOS 10.0.2 on my iPhone 6, the phone app keeps freezing when I open it and remains frozen for about 30 seconds.  Then it closes its doors.  Then only can open and use the phone/directory.  Does anyone else have this problem?

  My husband and my phone do the same thing. We are constantly reset. Very frustrating!

• Unable to access iBooks Store for iPad after upgrade to iOS 9.3.3.

  We do not seem to access my iPad iBooks store 2 Air or my wife Mini 4 iPad after upgrading iOS 9.3.3 machines. When you click on any of the icons store across the lower part of the application, we get a blank white page. We can access all our books purchased on the iCloud, but cannot look for first timers. The iBooks app seems to work normally on my iPhone 6 after the iOS upgrade. Anyone else has a similar problem?

  Yes. Double-click the home button on the iPad and the iBooks app sliding upwards and out of the screen to close.

  Click on the home button to return to the home screen, then hold home and power/sleep buttons for 10-15 seconds or until the Apple logo appears.

  Reset draw iPads. Let them restart and try opening the iBooks App again.

  No data should be lost by the present.

• After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  If you see the lock of Activation screen after update your iOS device, you want to try the following:

  -Restart your iOS device and try to connect again.

  -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

  -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

  -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

  -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

  I hope that helps!

• Problem when deploying application to the IOS Simulator!

  Dears

  I have faced the following error when you try to deploy application (oracle application example) on iOS Simulator

  [22: 45:01] undeployment.

  [22: 45:01] - incomplete deployment.

  [22: 45:01] failed to deploy on the iOS Simulator.

  [22: 45:01] deployment failed due to one or more errors returned by 'osascript '.  What follows is a summary of the returned error:

  Command-line execution failed (return code: 1).

  I use Xcode 6.1 and JD 12.1.3

  Thank you

  Dears

  I solved this problem by reinstalling Xcode worm 5.1.1

  Xcode 6.1 is not compatible with the MAF so far

  Thank you

• Black bands during export to the iOS Simulator

  Hello

  I don't understand why I have black bars when exporting to iOS Simulator on an iPhone 5, with an AIR for iOS?

  I also managed to test on my device once and ever after... And I managed to export on the device the first time, I also had these black stripes at the top and bottom.

  It's like having an iphone 4 inside an iphone 5 (which you have when you open an iPhone app on the iPad).

  On the screenshot, the image inside must take the entire screen, as you can guess...

  Thank you

  

  I finally realized thanks to this site: AIR of deploying applications on iPhone 5

  Including an image called "[email protected]" to the root of the package has worked!

• Debug using iOS Simulator (cvm.properties file missing)

  Hello

  I'm trying to debug your sample of JavaDemo. I already have the deploy in an iOS Simulator and I have done the job. But now I'm changing a little more sample and I would like my debugging code.

  I followed the instructions of Testing and Debugging ADF Mobile Applications - 11g Release 2 (11.1.2.3.0)
  

  Can't get to step 3 to specify the debug cvm.properties file settings. Without this clarification, I can't debug my app.

  Where is this file or how it create?

  Thank you for your attention,

  Kind regards

  Will be.

  Watch this video - https://blogs.oracle.com/mobile/entry/debugging_adf_mobile_apps_on

  You can find the cvm.properties file in JDeveloper under the accordion of application under descriptors resources.

• iOS Simulator launch, id: point of entry (start) undefined error

  I'm still not able to launch the iOS Simulator after update to AIR 16.0.0.245. I see the following on the execution of a debugging error message run:

  Create iOS package

  ID: undefined (early) entry point. Usually in crt1.o for architecture i386

  Compilation failed during execution: id64

  My adt settings look good, and path to the SDK (iOS 8.1) is good. Debugging on unit works very well. This occurs in a pure ActionScript project that makes heavy use of Stage3D/Starling/feathers.

  Can anyone point to some troubleshooting on this topic?

  This issue is fixed in the latest beta (16.0.0.250), please try with the same and let us know if you face any problem.

• IOS Simulator Flash CC access problem

  Hi, after upgrading to Xcode 6.0.1 I can't test CC Flash applications, through "Control" > "test movie". I get the message "unable to launch iOS Simulator from the following location...". ».

  The path that I use (iOS Simulator SDK) is: /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S DKs/iPhoneSimulator8.0.sdk

  I use the AIR SDK 15.0.0.302

  Hi all

  Thank you for your patience. All issues related to the Simulator iOS XCode 6.x have been fixed in the latest version of Flashpromanager.new CC 2014 (Build No. 14.2.0.20) which was released yesterday.

  Inviting you to please update and try and let us know if you still face problems.

  You can update your version of Flash CC 2014 by simply going to the help > update or through Creative Cloud App.

  You can learn more about the update to Flash Professional help | Summaries news

  Rgds,

  Mukesh

• You cannot change device iOS Simulator, AIR_IOS_SIMULATOR_DEVICE ignored

  I can't get the iOS Simulator application to run as something other than the iPhone 5 when using AIR adt. I tried to change the variable of environment AIR_IOS_SIMULATOR_DEVICE of different values, but the Simulator always throws my app simulating an iPhone 5.

  I tried the following:

  setenv launchctl AIR_IOS_SIMULATOR_DEVICE 'iPad Retina.

  setenv launchctl AIR_IOS_SIMULATOR_DEVICE "iPhone 6.

  I confirmed that the setting is changed by testing:

  getenv launchctl AIR_IOS_SIMULATOR_DEVICE

  I have to restart something or something to rinse?

  I use AIR 15.0.0.289, Xcode 6.0.1 OS X 10.9.5. Is a pure ActionScript Project making intensive use of Stage3D/Starling, and I use 14 IDEA IntelliJ EAP IU - 138.2210.3 (ouch that name hurts) as my development environment.

  Raise IntelliJ IDEA after that every change of AIR_IOS_SIMULATOR_DEVICE is the only way to get this working.

  Boring, but works for me!

• After deployment got "404 Not Found".  How to find the correct URL?

  For the experienced:
  
  Preparing to deploy my application, I use JDeveloper 10.1.3.4 to deploy the application on the server standalone oc4j included in JDeveloper. After deployment, I get the error "404 Not Found" when trying to invoke the application in a browser. The deployment seems OK, because the log in JDeveloper window showed no error executing deployment from inside JDeveloper. So I guess the question is how to find the correct URL to invoke the application. Here are the steps I took to make the deployment.
  
  First, I installed the standalone oc4j by running the .bat < jdev_home > \jdev\bin\start_oc4j file. Installation is OK because I have deployed the application SRTutorial and invoked successfully in a browser.
  
  The WAR file has been created by right-clicking on the ViewController project and select this option to create a WAR file. At the root of the application its own name, I typed "ZB" in the area of the root of context.
  
  Then in ViewController-> resources, right_click the deployment file (ZBOV.deploy) and chose ' deploy to "the local_standalone_oc4j. Messages in the Journal of JDeveloper window for deployment are all nice and clean without errors.
  
  I then used this url to invoke the application deployed in a browser:
  
  http://localhost:8888/ZB/faces/staff/login.JSPX
  
  But I got an error "404 Not Found". Immediately, I tried citing the application of SRTutorial, and it works fine.
  
  Login.JSPX is one of the pages of the application. In the browser of the application, it is with other files in the content of ViewController/Web/personal folder, so I used /staff/login.jspx after ZB/faces.
  
  What could be wrong? If the deployment is really successful, how to find the correct url to invoke the application?
  
  Thanks a lot for your help!
  
  
  Newman

  Hello

  According to me, there are 2 possibilities (could be more that I'm not aware of if :)).

  1. your deployment profile has been changed to use a different context root.
  2. your request has not been installed correctly.

  To 1, try to create a new deployment profile and leave the values by default as it is the case, run the jspx page, get the root context, deploy the application to a different OC4J instance (using the new deployment profile), and then run the application with the context root, that you received from the embedded OC4J.

  For 2, check the log file and see if you had any error / exception.

  HTH.

  Arun-