Debug using iOS Simulator (cvm.properties file missing)

Similar Questions

• Impossible to use iOS Simulator with the new update of February

  16 & 17 AIR worked fine with the iOS Simulator... This news throws version errors is every app installed... AIR even app that were already installed...

  I have an application that loads the external sounds to play and I get a 1009 error when I try to read.

  Thank you

  Craig

  Repair permissions and restarted... seems to work now.

• Deploy using WLST Composites with properties file

  Hello
  
  Can someone tell how to deploy composites using WLST.
  
  I found the command below, but I just wanted to include the location, configplan. partion in the file propery.
  
  sca_deployComposite (serverURL, sarLocation, [Replace] [user] [password], [forceDefault], [configplan], [partition])
  
  
  -Thanks in advance

  973841 wrote:
  I do the following
  Created a test.cmd file that contains the commands below

  I don't think it's a good idea to mix windows with jython shell commands commands in the same file...

  I recommend that you take a look at the following... Linking WLST Ant is probably the most appropriate way for your case...
  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13715/using_wlst.htm

  I hope this helps...

  See you soon,.
  Vlad

• Cannot find the file cvm.properties

  I need to do some debugging of java code, and for that I was reading

  22 test and debugging of the Applications of MAF (version 2.0.0.0.0)

  section

  22.3.5 how to activate JavaScript and Java Code debugging

  It is said

  "A cvm.properties file allows you to specify the start for the JAVA virtual machine and web views MAF settings to activate Java and JavaScript code debugging. "The cvm.properties file is automatically created and placed in the Descriptors/META-INF directory under the Application's resources"

  However, I don't see this file in my application of the MAF.

  An advise please?

  Vik

  OK I used MAF 2.2 where this file is replaced by maf.properties

• Request for suspension after deployment iOS Simulator

  Hello
  
  If a deployed application of JDeveloper for the iOS Simulator is 'suspended' just after the Simulator presents itself (no content displayed - only a symbol of the wait, blocked Device Simulator), this behavior have trigger known causes? If so, who are? Has anyone experienced this problem as well?

  If you have enabled java debugging by setting java.debug.enabled = true in cvm.properties. I fell on the same subject. As soon as your application starts, it waits for the remote debugger to connect and appears to hang. It's a warning in section 17.3.3, but I think that a lot of people will continue in this issue.

  It would be better if the rotation animation could be replaced by a message saying that it has to wait for a remote debugger to connect. Maybe a nice improvement ask :-)

• IOS Simulator Flash CC access problem

  Hi, after upgrading to Xcode 6.0.1 I can't test CC Flash applications, through "Control" > "test movie". I get the message "unable to launch iOS Simulator from the following location...". ».

  The path that I use (iOS Simulator SDK) is: /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S DKs/iPhoneSimulator8.0.sdk

  I use the AIR SDK 15.0.0.302

  Hi all

  Thank you for your patience. All issues related to the Simulator iOS XCode 6.x have been fixed in the latest version of Flashpromanager.new CC 2014 (Build No. 14.2.0.20) which was released yesterday.

  Inviting you to please update and try and let us know if you still face problems.

  You can update your version of Flash CC 2014 by simply going to the help > update or through Creative Cloud App.

  You can learn more about the update to Flash Professional help | Summaries news

  Rgds,

  Mukesh

• Impossible to debug Flash to iOS Simulator

  Hello

  AIR Beta 15 (302) and 2014 use professional Flash, Flash throws the error "unable to install the application on iOS Simulator."

  The SDK path is set to /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S DKs/iPhoneSimulator8.0.sdk

  I use profile development and selected the Debug Mode...

  Thanks for any help you can give.

  Craig

  I can suddenly using AIR 16 but not AIR 15.

• How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file.

  How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file. This means that the file is still in the iCloud and available to be downloaded to any device.

  In practice, I want to be able to scan and download through my documents located in my iCloud and once I didn't need them on my iOS device I would like 'load their return to the cloud' to my storage of the iOS device is not used.

  Thank you in advance to the community!

  Max

  The only way I found to do that once a file has been downloaded is to remove it and add it again through either from Finder on Mac or iCloud.com.

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• "Enter password" calls while debugging using the 4.2.2.66 (8830-Verizon) Simulator

  If I click on "Start the Simulator" the Simulator works well, but I'm trying to connect to a debugger, I get the following message:

  Password

  If I don't get anything, the debugger connection times out.   I tried things like "password" and "blackberry", and the debugger just disconnects.  I've debugged using dozens of other simulators, and I have never seen it before.

  Anyone know why this is happening?

  Thank you
  Mark

  I believe that I have found a workaround.  I use the 4.2.1 JDWP.  If I use the JDWP 4.7.0 instead, I do not receive the password, and the debugger attaches successfully.

• Evaluation of XML Namespace by using the java properties file

  Hi all
  
  In my java class, I get the XML as a string. I am convert this string to xml. So in order to evaluate the xpath expression, I'm able to evaluate the xpath expression by using the namespace prefix and the namespace url as key / value in my properties file. It has worked well.
  
  
  But my project is that,
  
  I can receive different xmls with different sets of namespaces. For each xml namespace prefix and url wil set. While I can keep track of a set of namespace prefix and url for each xml.
  
  The problem here is that
  XML_A is to have its own prefix - ns1 pointing to 'http://orders.com/purchase', ns2, pointing to "http://orders.com/invoice".
  
  XML_B is to have its own prefix - ns1 pointing to 'http://sales.com/stock', ns2, pointing to "http://sales.com/item" - I mean same ns1 and ns2
  
  
  Kindly tell me, it's possible in the file build.properties, to bring together the key pair / value. while I have not lead to any conflict, of having the URL of the different namespace
  for the same key "ns1."
  
  ns1 = http://orders.com/purchase
  
  
  ns1 = http://sales.com/stock
  
  
  I want the above two lines occur in the same file build.properties. Also, when using MapObj.get ("ns1") - (where MapObj will see the values of keys to the build.properties file.)
  I want to differentiate the ns1 under certain conditions (xml_name in my case).
  
  Here for the prefix, I have no other don't be concat something to make a difference like A_ns1 and B_ns2. This will create problems. So kindly help me by giving an alternative.
  
  
  
  Thank you
  Sabarisri. N

  Hi Sabarisri,

  First, there's a material typo in my previous post (hmap2 must be read hmap, all along). I who will edit later because it is annoyingly confusing. But leave it for now.

  I think I was so explicit that I was able to convey the idea that ns1, ns2, etc., if there is more, used by the author of XML_A and XML_B are unimportant as long as you, as the consumer of them, are concerned. Apparently, I was not very successful.

  Let me do it again.

  Assume that XML_A contains the prefixes and namespace URIs like this. I even add one more by way of illustration which may overlap in the two documents.

  xmlns:ns1 = "http://orders.com/suppliers".
  xmlns:ns2 = "http://orders.com/stock".
  xmlns: x = "http://orders.com/serial."

  Then in XML_B, these.

  xmlns:ns1 = "http://customers.com/contact".
  xmlns:ns2 = "http://customers.com/billing".
  xmlns:y = "http://orders.com/serial".

  (ns1, ns2, x) and (ns1, ns2, y) are appearing as such when xml documents are served. x and there are still pointing to the same namespace (think of it as the namespace where the serial number of the orders they need later use to gather the two sets of data.) x and there is maybe not even the same same alphabet their semantics (namespace uri) are the same, the same namespace.

  Put yourself in the situation of consuming them. You know you have to deal with totally 5 namespace uri. You build the dictionary: a HashMap or unique or other properties file. Under your control are the namespace prefixes. You can ignore absolutely what they use ns1,... x, y. Design you your own. That's all.

  hmap.put("p","http://orders.com/suppliers");
  hmap.put("q","http://customers.com/contact");
  hmap.put("r","http://orders.com/serial");
  hmap.put("s","http://orders.com/stock");
  hmap.put("t","http://customers.com/billing");
  

  One more time (p, q, r, s, t) are figurative, you name it what you please as long as they are in line with the production of the grammar of namespace prefix.

  With the help of (p, q, r, s, t), you build your xpath query. The namespace context Manager can resolve correctly. You can't even say what namespace prefix must be used by querying the xml, A or B.

  Hope that makes it clearer by the repetition by another speech.

  Published by: tsuji 7 Sep 2011 08:13 (typos only)

• Is it possible to debug an iOS device via a USB rather than using the network?

  Hello

  Is it possible to debug an iOS device via USB instead of using the network? I want to test demand for offline scenarios. Please let me know.

  Thanks in advance,

  Swathi.

  Router is on but disconnected from the internet. Your computer is assigned an ip address by the router. It will be something like 192.168.0.1 the IOS device can be 192.168.02. Most of the routers will identify attached devices and their IP via the administration panel. If you receive a Windows command prompt and type ipconfig, you will see the IP address of the PC.

  Your router is now a LAN - is differrent from being connected to the internet.

• CheckSUR Log - load useful files missing, nowhere to be found.

  Hi all

  Please check the log file CheckSUR below. He mentions four payload files that are missing, and I can't find these anywhere (there are more, but I could find others on)

  other computers; I ran the system update tool several times). Please let know us where I should look for these four.

  Thank you, Denis.

  PS The system is Windows 7 Enterprise 64 bit on a Dell PC Optiplex 9010

  ========================================================

  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.22471
  Version of the package 26.0
  2016-09-19 23:30

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI Payload file missing 0 x 00000000 auditpol.exe.mui amd64_microsoft-windows-m... ditevtlog.resources_31bf3856ad364e35_6.1.7601.23452_he - il_9f2a4f1263240fd7
  (f) CSI Payload file missing 0 x 00000000 lsasrv.dll.mui amd64_microsoft-windows - lsa.resources_31bf3856ad364e35_6.1.7601.23452_he - il_cbcc7f709fe30031
  (f) CSI Payload file missing 0 x 00000000 amd64_microsoft-windows-c certcli.dll.mui... ityclient.resources_31bf3856ad364e35_6.1.7601.23452_he - il_a9e40209a91c623d
  (f) CSI Payload file missing 0 x 00000000 certcli.dll.mui x86_microsoft-windows-c... ityclient.resources_31bf3856ad364e35_6.1.7601.23452_he - il_4dc56685f0bef107

  Summary:
  Seconds executed: 910

  To avoid confusion & duplication of effort, please post any/all further follow-up in replies to your TechNet thread => https://social.technet.microsoft.com/Forums/windows/en-US/6a892abf-4d22-4610-889e-6c2788e8cc58/checksur-log-missing-payload-files-nowhere-to-be-found?forum=w7itproinstall#8ddf7192-b833-462a-a085-cc484bf21e0f

• Read Device Simulator jad properties programmatically

  Hello.

  I know there are ways to read properties in an RIMlet JAD file, but we face a problem when you use the Simulator devices:

  The common way to do this is more sample extract to:

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/programmatically-read-the-attributes-o...

  And it's working pretty well on the device.

  However this code snippet does not work when you use the device Simulator (we use 9000 Simulator included in JDE components). It seems that he is not capable of matching the CodeModuleGroup of the application.

  The project is compiled with API 4.6.1 and we use ant + bb - ant - tools for the generation.  Pourrait - what the problem may be because on a simulator, we do not install the app?

  So the question is: is there a trick to be able to read the file properties on the simulator device as jad?

  THX in advance,

  Why not install the application via the jad, rather than compile directly in the Simulator?

  If the MDS Simulator, start it up the Simulator you want to test with, put your jad/cod on a web site accessible and load from there.

  Just a thought.

• iOS Simulator launch, id: point of entry (start) undefined error

  I'm still not able to launch the iOS Simulator after update to AIR 16.0.0.245. I see the following on the execution of a debugging error message run:

  Create iOS package

  ID: undefined (early) entry point. Usually in crt1.o for architecture i386

  Compilation failed during execution: id64

  My adt settings look good, and path to the SDK (iOS 8.1) is good. Debugging on unit works very well. This occurs in a pure ActionScript project that makes heavy use of Stage3D/Starling/feathers.

  Can anyone point to some troubleshooting on this topic?

  This issue is fixed in the latest beta (16.0.0.250), please try with the same and let us know if you face any problem.