Required drivers
Just bought HP laptop 2124tu pc and installed windows 7 (32-bit).
Device Manager shows that the drivers for the following items are not available:
Ethernet controller
Network controller
PCI device
PCI Simple Communications controller
SM Bus controller
Help, please
Gerard
Dear Paul,
Thanks for your reply.
Today nothing material shows yellow icon in device manager which indicates that no other drivers are necessary.
I am facing another problem.
When I play the mkv file in VLC Player, the image is not clear (if I play the same file in another system, the picture is absolutely fine).
Can you guide me - what is the problem. I hope that my laptop has Visual map.
In addition, please suggest a suitable screen resolution, because it has a 15.6-inch wide screen. From now on, only three options are available: 1366 X 768, 1024 X 768, 800 X 600. The screen don't must not watched Chassis mounted.
Thank you for your cooperation, as always.
Concerning
Tags: Notebooks
Similar Questions
-
Greetings,
I am trying to install Windows XP Home edition on my old days by Satellite A200-1AX. Today, I tried to boot from the CD of Windows XP Home edition or after the copy of the system files, the laptop produces the error that Setup did not find any hard disk during the Installation of Windows XP. I looked on the internet and found the following page:
http://www.howtogeek.com/HOWTO/Windows/resolving-Setup-did-not-find-any-hard-disk-drives-during-Windows-XP-installation/
Explains how to resolve this problem. So I try to make my own installation CD of Windows XP Home edition with the necessary drivers. My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running? It is not necessary to install the drivers for all the A200-1AX since the first installation of XP, I can always go back and install those remaining of the XP; but I don't want the installation process interrupted due to a missing driver where I have to repeat the process of manufacturing more install of WXP CD custom. The list of drivers and devices provided by Toshiba is too long to write on a single installation with XP CD.
My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?
If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?
Thanks in advance for your answer.
Best regards, Ashraf.
> My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running
You will need to include only the Intel Matrix Storage Manger for the XP CD again. Without this iMSM XP will not see the HARD drive
This driver is important. Other drivers can be installed after the installation of XP!> My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?
There are 2 versions of BIOS; One for Vista and one for XP. Generally, the update of the BIOS must be made before the instillation of OS but you can also try to do after installing XP. In both cases, the update of the BIOS would be possible.
> If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?
Generally, Yes! Without the good BIOS features like the FN buttons could not work properly! -
Win 8 required drivers for Dynadock U10
I can't find the dynadock u 10 drivers for win8.
Hello
There are no special software for a Dynadock U10.
Only a display driver is necessary and if you are looking for the display driver to win 8 Dynadock U10 I recommend that you check the http://www.displaylink.com/support/downloads.php page -
Required drivers for the HP Pavilion TouchSmart 10-e004au laptop running windows 7 32-bit
Hello world!
I deleted windows 8 and installed windows 7 32 bit home premium edition, but a lot of drivers and adapters are missing.
My netbook is
Laptop HP Pavilion TouchSmart 10-e004au
namely, I need the drivers following for it:
1. Ethernet controller
2. network controller
3. PCI device
4 PCI Simple Communications Controller
5. SM Bus controller
6. some unknown device
7 USB Mass Storage Device (even if it's the Flash Player playback)
And 3 devices are a yellow highlighted and I will use hardware ID with them
-Network controller
PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C & REV_01
PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C
PCI\VEN_10EC & DEV_8179 & CC_028000
PCI\VEN_10EC & DEV_8179 & CC_0280-PCI device
PCI\VEN_10EC & DEV_5229 & SUBSYS_21A9103C & REV_01
PCI\VEN_10EC & DEV_5229 & SUBSYS_21A9103C
PCI\VEN_10EC & DEV_5229 & CC_FF0000
PCI\VEN_10EC & DEV_5229 & CC_FF00-Controller universal Serial Bus (USB)
PCI\VEN_1022 & DEV_7814 & SUBSYS_21A9103C & REV_01
PCI\VEN_1022 & DEV_7814 & SUBSYS_21A9103C
PCI\VEN_1022 & DEV_7814 & CC_0C0330
PCI\VEN_1022 & DEV_7814 & CC_0C03Your help is requested, and the response is awaited with impatience.
Thanks in advance.
Best regards
ARC91
Hello:
Here are links to the drivers you need.
First, install the amd chipset drivers and restart. You want the first driver on the Web page.
Who will install the smbus controller.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032
Then, install the driver amd radeon beta from the link below and restart.
http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx
Audio: Accept the agreement. DL and install the driver first on the list.
Ethernet: DL and install the 4th driver on the list.
Wireless:
USB 3.0: Install both...
Card reader:
Some unknown device may be it. I need the hardware for him ID if the driver below does not work.
Webcam:
Simple PCI communication controller: I need the hardware for this also ID that I've never seen a laptop with an AMD chipset and processor present this description.
-
Required drivers for Windows 7 (64 bit) - for PC laptop Compaq CQ58-201SA
Please provide all the drivers for my computer. As soon as possible
Don't know what wireless card you have without name or material id since HP uses different models - but these pilots should help you get started. You probably have Ralink or Atheros?
First driver to install is AMD Chipset:
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Then, install the AMD Radeon Catalyst graphics driver.
http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx
If the AMD Chipset above does not install USB 3.0 drivers get these:
Realtek Audio > accept the agreement, download and install the second pilot:
Realtek Ethernet > install the 3rd driver on the list.
HP Driveguard:
http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66078.exe
View the name of the card wireless device manager. If you have already installed Windows 7 look for a network without driver controller. Right click and select Properties, go to the Details tab and use the drop-down list selector to choose the hardware ID. Post half less string - above it.
-
C9M37PA #ACJ: require drivers HDMI for HP Sleekbook 14-b104AU for Win - 7
I have a HP Sleekbook 14-b104AU and I want to connect to monitor and I bought a VGA to HDMI converter. But the display does not come and I updated all drivers also. Please help and make me the solution for this.
OS is Windows 7
Hello:
Have you tried the graphics driver directly from AMD?
http://support.AMD.com/en-us/download/mobile?OS=Windows%207%20-%2032
If that one doesn't work, try this one...
-
My Pentium III 1.0 GHz computer (394 MB of RAM, disk hard 500 GB) crapped out on me after that I loaded soft PicturePerfect of Nikon. For some reason, the Nikon software ruined my registry. Now, whenever I turn on my PC, I get the BSOD with error "Unpaginated IPF in space". I can't start my computer in safe mode or "start Windows normally" as I get the same error msg almost immediately without seeing the Windows logo and progress bar. I can start my PC using the "last good known Configuration" and he will be starting the Microsoft Windows logo with the progress small downstairs bar, so I know that the hard drive is fine. Then the screen goes black while WinXP is loading from the hard drive, and then the BSOD with error page comes up. I suspect that there is incorrect data in a critical area of the drive where Windows requires data start correctly. In the meantime, I can't boot into Windows at all because all Windows options lead to BSOD with the msg of error page.
I resigned myself to reloading Windows XP from scratch, but I can't seem to get my original installation CD to not work. I've reconfigured my BIOS to Boot CD, and then start the original Windows XP CD. He reads and load it all very well, and then it hangs at «Setup starts Windows...» "I thought he had to test the equipment, but it remained in this State for 3 hours! The "Welcome to Windows Setup" screen never came.
I thought to use FDISK to the new drive of 500 GB and formatting on the errors on the hard drive, but I can't do since I can't complete the installation process. I feel stuck in a bad situation where I can't enter BACK to FDISK and FORMAT my C: drive.
Pls help!
Thank you!
Here's what I did and learned:
1. I replaced my DVD burner with my CD - R original delivered with the machine and disconnected the 2nd CD - R.
2. I disconnected my 2nd hard drive, in part to minimize the current of the power supply, but also to keep clean and simple start between a (hard) C: and D: (CD - R) drives.
3. I re-tested my SDRAM using test mode full and deep. To my surprise, I found not 1 but 2 SDRAM bad! I replaced the original SDRAM 128 MB and re-directed tests of memory with the Diagnostocs memory of Windows and Memtest86 +. All the 512 MB of RAM is perfect now.
4. I started to new WinXP and have the msg «Setup starts Windows...» ». This time, I waited for about 15 minutes and to my surprise the configuration screen came! There is a long period of time between the msg «Setup starts Windows...» "at the start, and when the configuration menu actually comes to the screen. I was able to partition and format my hard drive.
Lessons learned:
-Maintain the number of devices to a minimum so that it keeps unknown hardware failures to confuse the troubleshooting questions.
-Test the RAM in deep test mode is important and test several times.
-It could be more than 1 Bank of RAM can be bad so carefully test RAM.
-Wait for the next Windows installation menu. It is not instantaneous, but it will come sooner or later.Thank you!!!
-
Required drivers for Hp 15 laptop computer r-033tx
Please provide drivers for Hp 15 r-033tx computer laptop for Windows 7 x 64 bit
Hello:
HP is aware of the drivers missing from the problem of support pages and is working to address.
It affects hundreds of laptop models.
Because I do not work for HP, I don't know when the sites will be operational again.
This happened once before, so I hope they have learned from the experience past how solve the problem.
With the feast of Thanksgiving in the United States, which has delayed things, I'm sure.
We are on the third day of this problem.
-
Requiring drivers xp for dv9643eg
I use win7, but due to some programs needed for my work can not run, I intend to use the dual OS with xp. The only problem is I don't think the drivers to my old lapt acceptable running (no sound, no network, then it do nothing, lol). I have tried many guides, but no one was exactly for mine, anh I don't know much about harware. So, I hope someone can help me solve this problem: -.
Have you tried Jonas guide? It's usaully the easier to follow:
-
INSPIRON N5110 require drivers for WINDOWS XP
Hi all...
I installed windows XP on my Inspiron N5110. Because my business run only on Windows XP or 98 software... So please I need all the driver for N5110.
Such as video, Audio, Wifi, Lan and all the others. Then please help me where from I can download drivers...
Concerning
Asif
You might try Windows 7 32 bit, some old software work on the 32 bit, which does not work on the 64-bit especially if you run it in compatibility mode.
Dell has a full set of Windows 7 32 bit drivers for this model but don't list them. I have listed the here.
-
P6L83PA #ACJ: HELP WITH THE REQUIRED DRIVERS
Hello Sir / Madam,.
I recently bought a HP 15-ac170TU, product # P6L83PA #ACJ. I registered the product on the Web site and then tried to download drivers for Win 7 Ultimate 64 bit. I can't find these drivers. Please help me please where can I download the drivers for the below links
Ethernet controller
Network controller
SM Bus controller
Display
Your first action in this area would be highly sought.
Ravi Dubey
You are the very welcome.
See if this card wireless driver works better...
You can take a look at the support page and see what other software you can.
Synaptics touchpad driver
CyberLink YouCam software
CyberLink PowerDVD
HP system event utility
HP CoolSense technology
-
Required drivers to open Adobe Premiere
I can't open Adobe first CC 2015 because it asks me to download the drivers.
But I don't know how to find them.
I have an Imac 3.1 GHz Intel Core i7 Mc
NVIDIA GeForce GT 750M 1024 MB
Steps to set the permissions:
Step 1:
(1) right-click on the icon in the Finder, then select 'Go - To' folder.
(2) you will get a text box, type in the following command, and then press the 'Return'. () Do not miss ~ symbol)~/Library
It will open the library user.
(3) then navigate to Application Support > Adobe
.
Right-click on the Adobe folder and select ""GetInfo ' option. "
Expand the sharing & permissions section.
Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator option,
Then indicate ""& read/write " permission currently logged in username and Administrator option."
Click the gear icon and select apply to closed. Close the dialog box information .
Step 2:
(1) right-click on the icon in the Finder, then select 'Go - To' folder.
(2) you will get a text box, type in the following command, and then press the 'Enter'./ Library
It will open the library system.
(3) then navigate to Application Support > Adobe
.
Right-click on the Adobe folder and select ""GetInfo ' option. "
Expand the sharing & permissions section.
Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator option,
Then indicate ""& read/write " permission currently logged in username and Administrator option."
Click the gear icon and select apply to closed. Close the dialog box information .
Step 3)
(1) right-click on the icon in the Finder, then select 'Go - To' folder.
(2) you will get a text box, type in the following command, and then press the 'Return'. () Do not miss ~ symbol)~/Library
If you look under library user folder for the folder named Preferences .
Right-click on the Preferences folder, and then select ""GetInfo ' option. "
Expand the sharing & permissions section.
Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator option,
Then indicate ""& read/write " permission currently logged in username and Administrator option."
Click the gear icon and select apply to closed. Close the dialog box information .
After you complete the 3 steps, try to launch Premiere Pro and check.
-
Windows 7 x 64 required for HP Envy 17 laptop drivers
Hi all
I have problems with some drivers for this machine to original-Windows 8
Specifically, I need win x 64 drivers for the touchpad and USB 3.0
The model number, I can find is in the BIOS that tells me that it is an EOK85UAR #ABA
I tried win7 drivers for other models without success - a USB 3.0 thugs BSOD driver had on me and I had to use system restore to put the right thing!
Any help appreciated
Peter
Hi, Peter:
Your laptop is not supported by HP for Windows 8. There is no W7 driver for it.
This isn't my first rodeo... I have helped many people install W7 on models with the same hardware as yours, and nobody has reported problems using the drivers provided by the Probook s 4540, except the card reader driver.
Install the drivers, it is like building a House. You must start with the Foundation and accumulate. You don't just go about willy-nilly drivers installing or can do crazy things.
The first driver to be installed is the utility Intel Chipset Installation and reboot.
Next is the Intel HD graphics driver, reboot.
Next is the audio driver, restart.
Next is the Realtek Lan driver wired.
Your model uses the Intel wireless driver.
You can use this model card reader driver:
If the driver of the touchpad of the 4540 s does not work for a reason use that directly from Synaptics.
http://www.Synaptics.com/resources/drivers
For any other device requiring drivers yet, click on it and post the hardware ID's and I'll post the links to the drivers you need.
Use this guide to find the ID of the hardware for a device.
-
Drivers Vista 32-bit works on XP 32 bit?
I got this HP model a6544f since a few months now and find that much too much my older hardware (scanner, etc.) and 16-bit software (which I use daily) simply does not work with Vista or a 64-bit OS. I prefer to use XP 32-bit where all happy lives on my old machine. But the driver for this system only specifies Vista 32 - bit or 64 - bit. I already added a "real" video card to get digital and put output at power level to manage this card. If necessary, I suppose I could live with the 32-bit version of Vista, but would really prefer to use XP. (I think of all the "improvements" in Vista as nothing else that candies for the eyes, and you have disabled as many of them as possible anyway.)
Does anyone know if Vista drivers 32 - bt for different systems of motherboard will install on XP 32 bit? It will make you life easier if they do!
Thank you
Greg
HP a6544f, currently with Vista Home Premium 64-bit,
nVidia GeForce 8600 GT has added and PC Power & Cooling Silencer 610W parts provide (to power video card)GregPH wrote:
Hmmm... all the drivers I need are components of the motherboard . I was under the impression that HP (Compaq) plus their own Board of Directors. This would imply that it won't be manufactured by 'component', all the drivers no?
Motherboards are circuit boards, which don't require drivers. Components (i.e. the device IC) soldered to the circuit require drivers. They are made by the respective device providers. for example peripheral chips done Intel Intel, NVIDIA is peripheral chips NVIDIA, Realtek is peripheral chips Realtek, so on and so immediately.
And no, HP does not motherboards. Even if it did, nothing would change, he wouldn't have the IC device used on the motherboard. HP gets the device drivers to the sellers of the device, as everyone (including the motherboard manufacturers).
That said, you should have no problem getting the current XP drivers. All devices in this system are suppliers that make drivers available to the public. There are some sellers who don't release drivers for the public, like Atheros, Analog Devices, Broadcom (only for wireless cards), Sigmatel (IDT) and a few others, but your system does not all devices from these suppliers.
Here are the devices that require drivers of your system:
Intel G33 + ICH9R chipset INF Installer
http://downloadmirror.Intel.com/16023/A08/INFINST_AUTOL.exeIntel Matrix Storage Manager for RAID or AHCI ICH9R
http://downloadmirror.Intel.com/17059/eng/iata86enu.exeCreator of F6 disk prompt to provide the third-party storage driver when installing XP (required only for RAID or AHCI mode)
http://downloadmirror.Intel.com/17061/Eng/f6flpy3286.zipNVIDIA GeForce 8600GT
http://www.nvidia.com/object/winxp_178.24_whql.htmlMicrosoft High Definition Audio Bus - install before the Realtek audio drivers
http://s89934018.Onlinehome.us/Driver/kb888111xpsp2.exe (XP SP2 required)High definition audio Realtek ALC888S
FTP://66.104.77.130/PC/audio/WDM_R209.exe
ftp://202.65.194.212/PC/audio/WDM_R209.exe (alternate server)Realtek RTL8111C Gigabit LAN
FTP://202.65.194.212/CN/NIC/PCIE_Install_5708_1119.zip
FTP://66.104.77.130/CN/NIC/PCIE_Install_5708_1119.zip (alternate server)Conexant 56 K PCI soft modem (VEN_14F1 & DEV_2F20 & SUBSYS_200C14F1)
FTP://ftp.HP.com/pub/softlib/Software7/COL16029/PV-42541-1/sp26804.exeAgere LFW3227 Firewire (provided by the seller of BONE)
You are using a PCI-E graphics card so the drivers are not necessary for the graphics card Intel integrated, which is automatically disabled when you use the PCI-E x 16 graphics card. FireWire and USB controller drivers are now provided by Microsoft for OS later to Windows XP SP1, make sure you get those through the operating system, service packs or Windows Update.
To answer your original question, some driver packages can support Vista and Windows XP. For example, I downloaded a driver Atheros WiFi Dell's who did the support for Windows Vista. But when I extracted the driver files, it contained drivers, and other files required for both Vista and XP, but the real drivers for Vista are not compatible with Windows XP.
-
Satellite Pro M10: Need drivers for PS630E-G206D
No, model PS630E G206D EN
Please point me in the right direction so that I can get all the required drivers for my system.
I looked on this site, but still miss me several drivers, IR, wireless etc.
Sincerely, Jackie
Have you already checked Toshiba download under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp page?
Infrared driver is listed there (version 5.1.25.00). Regarding WLAN driver check it please your other display.
Maybe you are looking for
-
HP Pavilion a6750f: problem dual monitor (Second monitor not detected in DVI input)
Hello everyone, I'm going to by a problem of not being able to setp toward the top of my second monitor. I own a HP Pavilion a6750f with an ATI Radeon HD 3200 card on board running on Windows 7 Ultimate 64 bit operating system. In the back, I have t
-
Hello I have the task of making the program to configure the settings of the machine. It will be approximately 256 parameters. Parameters are digital and next to each must be the text name. The settings must be saved in the file and load from there b
-
Media player automatically close once a file stops playing
Original title: Windows Media Player Is it possible to close the Media Player automatically when a file is finished playing?
-
"messagecheck.exe has stopped working" message any time when I started my windows 7
Following is the display window: ---------------------------------------------------------------------------------------------------------- MessageCheck.exe has stopped working Windows can check online for a solution to the problem. --> Online and ar
-
How to keep metadata in Photoshop editing?
When I edit a raw photo in Photoshop from Lightroom, the photo loses its metadata? How can I keep the metadata created in Lightroom after editing in Photoshop?