Required modules

Similar Questions

• ServerLockManager required modules?

  1. What are the minimum required modules to run an instance dedicated for your ServerLockManager?
  
  2 - is a dedicated ServerLockManager instance actually needs to be assembled and started with your custom modules? Even if you have custom repository changes, should the ServerLockManager these definitions of custom repository?
  
  I couldn't find any documentation explaining if the ServerLockManager actually communicates with the database of underscore for the referential elements, it is locked. It doesn't seem like it should communicate with the database of underscore. If this is the case, then it seems that you can configure your ServerLockManager dedicated with only the essential modules and features he has to run. By doing this it would simplify your deployment process. This means that if your ServerLockManager does not contain a custom module, then you never have to shoot during deployments. I'm far from base here?

  SLM does not require a custom module.
  Just ongoing DafEar.Admin of execution is sufficient.
  He speaks not of DB, but different servers on TCP.

  ATG recommends after SLM for better performance.

  Peace
  Shaik

• Portege R930 - 15G - lack of security of Toshiba Assist Module

  On my new Toshiba Portege R930 - 15G I can't call the "Toshiba Assist security" module and only get the message 'a required module is not installed.

  If a Toshiba support person is reading this forum, I would be very happy to get a hint of what source I was able to download the required installation files.

  Maybe someone else has an idea how to solve the problem.

  Andreas

  > I can't call the "Toshiba security Assist.
  Can you please tell us how do you do that? Are you using the original preinstalled OS or the clean version?

  On the Toshiba download page, you can find this tool, version 2.0.9. try to download and install it.

• pulse width modulation

  What modules or do I need to acquire signals from an LVDT? I have an analog output, but is there another required module?

  ABC for an external power supply. According to the specifications of the signal conditioner box you need a power supply very stable and clean.

  CD to your analog input (+-10V?) of the cRIO.

  If possible use cable separate power and sensor power (try to avoid sharing the GND (C)) and if possible use the cRIO input differential.

• The modules I need for LiveCycle Output?

  Hello

  We want to install ss4 LC for outputmanagement. No other modules are allowed.

  Which modules to choose at this point?

  

  Thx for the help...

  Regards Axel

  LCM would take care of the required modules, and won't let you go forward. It should be output + Content Repository

  Thank you

  Wasil

• Previous data of module are replaced with the charge of the latter

  Hi friends,
  
  Once the Planner data are loaded into the data warehouse and after that I see the data of the SCM module I have loaded before using the DAC in the BI dashboard in which he is visible in the BI dashboard before loading the module projects.
  
  And also after the data of the SCM module is loaded, I don't see Finance and HRMS data that are loaded before using the DAC in the BI dashboard.
  
  Im not sure this problem why load the recent module is superimposed on the previous module to download the data into the data warehouse.
  
  What is perhaps the reason for this problem. Dint always not the cause of this problem.
  
  Thank you
  
  Kind regards
  Saro

  Try to create a new EP with required modules do not check at full load.
  Once you build the new EP CAD tools use to reset the data warehouse and run the EP, the first charge would be assimilated at full load and followed loads are levels
  If you want to go full charge just reset the data warehouse and run EP

  Just in case if you want to add another existing module EP just add these respective fields and build the EP and start to run the EP. In this case, all the other modules are run as Incr Mode and the new module like the full Mode.

  It should work.

• Help please - why is noon suddenly registered double on the same track (instances on several tracks)?

  Hello everyone, I have been recording of MIDI tracks years on my MacBook with no problems. All of a sudden, MIDI tracks began to record notes duplicate (exact replica - even not, same speed, etc.). ... This has happened on most, but not all, tracks I recorded in the past day or so.

  I was working on a special project with a lot of MIDI tracks and a couple of audio tracks - what is shown in the YouTube video that I have included to illustrate the problem:

  https://youtu.be/AaNOxfwzsmg

  All MIDI tracks recorded in this project before the past 24 to 48 hours recorded normally without duplication. About 90% of the tracks I recorded recently have duplication. The first brief example in the video shows the bass track, that duplication of work and represents 90% of the securities. The next example short - track of cajon - has not been saved with the duplication (so far, it's the only track I checked and made record normally in the last 2 days. Pieces recorded both before and after that the cajon track was duplicated notes throughout.

  The MIDI keyboard, I use as a controller as a Roland FP80. I used this keyboard for all MIDI tracks that don't require modulation or tar leaning over recent months. The MIDI keyboard transmit channel is set to 1, and to my knowledge, there very lunch limited functionality and cannot transmit multiple channels. (It's a good size weighted keys digital piano and this is why I use it.)

  If anyone can help identify the cause of this problem I would really appreciate it! The second part of the question is I would like a quick and easy way to delete ONLY the notes duplicate on all these tracks. I had already saved 7 or 8 in the project MIDI tracks until I discovered this problem when I started to delete some notes. I would like to be able to preserve what has been recorded.

  BTW, I looked for this problem and found a similar thread, but I think that the solution is that the used keyboard passed on several MIDI channels. As much as I know who does not apply in this case.

  Thanks in advance!

  SYSTEM SPECS:

  MacBook Pro (retina, 13 inches, end of 2013)

  Mac OSX Yosemite - version 10.10.5

  Processor: 2.4 GHz Intel Core i5

  Memory: 8 GB 1600 MHz DDR3

  Graphics card: Intel Iris 1536 MB

  Logic Pro X - version 10.2.0

  Working backwards... You can remove duplicate events by selecting all the events in a region (cmd-A) if in the roll of piano or selecting the region then go to menu edit - midi events Delete - reproduced.

  or (D).

  On why - there could be a number of reasons... First, open the list of events by pressing D and see if they are in fact identical... especially on the same channel environment.

  Also - if you could upload a screenshot of the low track to include both region and the railway inspector.

  

• TestStand training issues

  Hi all

  I have been using LabView for a couple of years now, and recently took a job where they use TestStand. I downloaded the TestStand 1 instructions for self-training and exercises, but I'm having some trouble.

  In the manual of the exercise, students it passes through implementation of the tests simulated CD. This setting simulates the physical characteristics (visuals) of the CD under test. This example uses the modules Vision of NOR, which my company does not currently have a license. As such, I met errors during execution because such files that the Init.vi IMAQ lack in my development environment. I downloaed the driver package NI VAS, assuming that these modules would be located inside her and I could use the trial period to get through the TestStand training. However, during the installation of the driver GO, I get a message that .NET framework 4.6.1 is required to install this product. When you select Yes to install the .NET framework, I encounter another problem where the installation is blocked because of a missing file of windows KB2919355 update. Following the links from Microsoft returns a page not found message, and I'm not sure if I would still be able to install this on my computer work anyway.

  Can someone help me get the trial version of going TO OR installed, or point me to some TestStand training exercises don't require modules OR autopsies?

  Thanks in advance!

  Hi StevoP80,

  We have actually updated the TestStand courses to remove this dependency, among many other improvements, which is probably what Daniella refers.  However, the registration process of the self to the rhythm of version for the new course is still ongoing.  Unfortunately, exercises for online courses depend on the vision and drivers of the IMAQ.  If you want to take the course again, you can register for a virtual course (online, but with a live instructor) to access the most recent.

• best practices for the evaluation of prerequisite logic GOLD

  Greetings,

  I think TS is not the basic features for the decision-making process (imp) for execution. All recommendations are welcomed and appreciated. Please find below the script.

  I would like to perform some configuration steps (custom step types) to a signal generator based on the selected user 'Test '.

  To make it simple for the signal generator Let's say, we have the following steps:

  The Freq value | Define PWR lvl | Set the Modulation Type. Set the Modulation ON / OFF. Setting the output RF ON / OFF

  For the selected user Tests say that we have Test (0) | B test (1) | C (2) to test (Test A & C requires Modulation, B does not work)

  Here's my question:

  I can't get the Freq VALUE | The VALUE PWR lvl | Value RF Power on / off to run installation of prerequisite for the evaluation of logic GOLD. (i.e. residents.) TestSelected == 0 | 1. 2)

  Ditto for the Type of Modulation Set | The value of Modulation on / off (ie the inhabitants. TestSelected == 0 | 2)

  Thanks in advance for any help provided.

  Chazzzmd78

  people of the country. TestSelected == 0 | 1. 2 would be at the local level. TestSelected is 3.  You're doing a bitwise operation GOLD on numeric values, then the comparison.

  You need

  (the inhabitants. TestSelected == 0) | (the inhabitants. TestSelected == 1) | (the inhabitants. TestSelected is 3)

• Not able to access the PV which are deployed in the RT using the EPICS IO Server

  Hi, we have NIPXIe 8133 and 1 windows vista (32-bit) PC and I installed LabVIEW 2012 (32 bit) and the required modules. I also have another PC (6.3 Santiago RHEL) based on RedHat Linux and all 3 PCs are connected to the same network. I want to develop an application in which I want to deploy some variables of process in RT and want to access this PVs in Red Hat Linux PC. In order to develop this application, I do RT as a server of EPICS and Red Hat Linux PC as a Client of EPICS. I have deployed some variables of process using Server EPICS in RT now I want to access the value of the PVs in Red hat Linux PC and in this EPIC PC base is already installed but I am not able access PVs that are deployed in RT if you please help me solve this problem. Best regards, Ishan

  I have not assigned by default in one of my system and bridge that was the only problem in my system. Once I have given Defaullt bridge in all systems, I can access all of the HP that are deployed in the RT other 2 machines connected in network.

• Security exception for EMAN keys, despite having installed in the sigtool.

  I am currently writing code to communicate with the Secure Embedded element on my phone Blackberry 9900. I received the NFCR and Eman signature keys that are needed for the same, and signed my application with the keys. However, while signing, in the list of required modules to be signed, I am not able to see the network module, and when I run the application signed on the device and try to access

  String conStr = "apdu:1;target=a0.00.00.00.03.00.00.00";
  connection = Connector.open (construction) (APDUConnection);

  I get the following exception:

  java.lang.SecurityException

  Error message: JSR 177 access is not allowed due to lack of class signature Eman

  Please advise on what my next step should be, and if there is another way in which I need to use the network.

  Hello

  You need Eman signed to perform on the INTEGRATED secure item, but there's a catch. The eJDE Eclipse cannot say that Eman is required because essentially the same API is used for EMBEDDED SIM vs. Therefore after building your cod file, you will need to sign manually by running the SignatureTool.jar tool of in:

  ------plugins\net.rim.ejde\vmTools

  The signing tool 'knows' what signatures to apply based on the content of the .csl file in your \deliverables\standard\7.x.x directory

  So before you sign, you must manually edit the file and add the following line:

  52455345 = NETWORK

  Then try to connect with the signature tool cod. Not to rebuild before and after the change of the csl csl is generated by the build process and thus your modification applied manually will be lost.

• Not be able to watch Netflix videos and play games

  When I watch a movie on netflix screen when I put the cursor over them to stop the subtitles go to black and white and image tweaks. What can I do to solve this problem?, also happens in some games.

  Hello Michael,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. open Netflix on Internet explorer?
  2. you receive an error message or code when using Netflix?
  3. What is the brand and model of your computer?

  Thank you for details on the issue.

  This behavior can occur if the required modules are not installed or if the graphics driver is not updated.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  If you are using Internet explorer to watch netflix videos and play games, Please make sure that the following modules are installed and enabled.

  -Adobe flash player.
  -Microsoft Silverlight.
  -Java.

  You can download flash player from this link:
  http://www.Adobe.com/downloads.html

  You can download silverlight from this link:
  http://www.Microsoft.com/getSilverlight

  You can also Download Java from this link:
  http://Java.com/en/download

  See also:
  Manage Add-ons in Internet Explorer
  http://Windows.Microsoft.com/en-us/Internet-Explorer/Manage-Add-ons

  If this does not help, use method 2.

  Method 2:
  Updated drivers from the website of the manufacturer of the computer's display adapter and check out them.
  Refer to this article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Having problems become waving Services start to work.

  I get the following message if displayed in a window BACK:

  node.js:205
  throw e; error process.nextTick, or "error" event on the first tick
  ^
  Error: Cannot find module 'delayed stream.
  at Function._resolveFilename (module.js:318:11)
  at Function._load (module.js:263:25)
  at Module.require (module.js:341:17)
  to the demand (module.js:352:17)
  to the object. (C:\Users\Chuck\AppData\Local\Google\Chrome\User Data\
  Default\Extensions\cnijnnaimeaacneklcndcafbnkeicckh\0.9.15_0\services\node\node_
  modules\ripple-emulator\node_modules\request\node_modules\form-data\node_modules
  \combined-stream\lib\combined_stream.js:3:21)
  at Module._compile (module.js:416:26)
  to object... js (module.js:434:10)
  at Module.load (module.js:335:31)
  at Function._load (module.js:294:12)
  at Module.require (module.js:341:17)

  Anyone know what is causing this error message and how to fix it?  Thank you.

  Find the solution/work around in another thread:

  https://github.com/BlackBerry/ripple-UI/issues/750#issuecomment-16137118

  Looks like the package delayed stream is missing from the installation drive for some reason any.

  Basically the need to go into your folder of ripple under Chrome extension and install the package of back flow.  Do in a command prompt:

  CD C:\Users\\AppData\Local\Google\Chrome\User Data\ Default\Extensions\cnijnnaimeaacneklcndcafbnkeicckh\0.9.15_0\services\node

  install NPM delayed stream

  Worked fine for me after that.

  Well if you use a profile of Chrome as the default value, change the value by default with ' profile #

• Cannot start the Ripple Services

  I downloaded the last ripple_ui.crx, then open browser Google Chrome and went to tools > Extensions, and then ripple_ui.crx in the Google Chrome Extensions window and added the extension.

  When I clicked on the "start waving Services":

  node.js:205
  throw e; error process.nextTick, or "error" event on the first tick
  ^
  Error: Cannot find module 'delayed stream.
  at Function._resolveFilename (module.js:318:11)
  at Function._load (module.js:263:25)
  at Module.require (module.js:341:17)
  to the demand (module.js:352:17)
  to the object. (C:\Users\myComputer\AppData\Local\Google\Chrome\User Data\D
  efault\Extensions\cnijnnaimeaacneklcndcafbnkeicckh\0.9.15_0\services\node\node_m
  odules\ripple-emulator\node_modules\request\node_modules\form-data\node_modules\
  Combined-stream\lib\combined_stream.js:3:21)
  at Module._compile (module.js:416:26)
  to object... js (module.js:434:10)
  at Module.load (module.js:335:31)
  at Function._load (module.js:294:12)
  at Module.require (module.js:341:17)

  It is a known issue that our dev teams are actively working today on set as soon as POSSIBLE.

  https://github.com/BlackBerry/ripple-UI/issues/750

• "The specified procedure is not found."

  I'm following you try to run an application using oracledb.

  C:\src\stash\calculations-viewer>node server/index.js
  C:\src\stash\calculations-viewer\node_modules\oracledb\lib\oracledb.js:28
      throw err;
      ^
  
  
  Error: The specified procedure could not be found.
  \\?\C:\src\stash\calculations-viewer\node_modules\oracledb\build\Release\oracledb.node
      at Error (native)
      at Object.Module._extensions..node (module.js:450:18)
      at Module.load (module.js:356:32)
      at Function.Module._load (module.js:313:12)
      at Module.require (module.js:366:17)
      at require (module.js:385:17)
      at Object.<anonymous> (C:\src\stash\calculations-viewer\node_modules\oracledb\lib\oracledb.js:23:15)
      at Module._compile (module.js:425:26)
      at Object.Module._extensions..js (module.js:432:10)
      at Module.load (module.js:356:32)
  

  "oracledb.node" exist at the location mentioned in the error message.  The module relies very well and includes the paths to the OIC and libs seem to as well. 

  
  

  This is my journey, I triple-checked that they exist.
  

  
  

  OCI_INC_DIR=C:\oracle\instantclient_12_1\sdk\include
  OCI_LIB_DIR=C:\oracle\instantclient_12_1\sdk\lib\msvc
  

  
  

  I must be missing something, but I can't see what.

  
  

  Any ideas?

  
  

  Thank you

  
  

  Glenn
  

  
  

  
  

  Oh dear.  I cleaned my WAY last week and must have inadvertently removed the oci.dll her.

  [head of fringe on the desktop]