processor that supports the hp dc 5100 sff

Similar Questions

• Can I upgrade my laptop of HP ENVY 17-j092nr a wireless card that supports the 802.11ac?

  I have a HP ENVY 17-j092nr Notebook PC with the wireless stock card.  Is it possible to upgrade the card to one that supports the 802.11ac?

  Mikeeeyy wrote:
  

  I have a HP ENVY 17-j092nr Notebook PC with the wireless stock card.  Is it possible to upgrade the card to one that supports the 802.11ac?

  Hello

  This model series is not the whitelist and you can use virtually any desired wireless card. Intel 7260AC for example...

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification.

  I've seen other posts on this topic. Nothing seems to work, so I thought I would explain my situation.

  The machine is new. Win7 64 bit company. The problem I see is that I try to load some versions of Visual Studio on the new machine. However, none of the discs auto-run using my local internal DVD drive. They all have a Readme file with the message "this disc contains a"UDF"file system and requires an operating system that supports the ISO-13346"UDF"file system specification."

  I know that the discs are good, I used the on my old machine, and I can always use them on other machines I tested.

  The real kicker here is that I can plug an external USB DVD drive... and then the local drive starts to read the installation discs! It's like making this action allows something else in the machine.

  Also, I even restarted the machine mode of diagnosis (without external DVD drive attached)... and restart, the drive would read the installation discs. BUT when I do a full stop and then turn on the machine upward, the local drive gives me the same readme file. Again, it is as if something gets activated, and then reset to a complete stop.

  I am at a loss of what to check then. Real head-scratcher, because I know the drive works and the machine can recognize the drive and even read installation discs.

  I do not have the applications installed on the machine of DVD burning, so I don't think there is a conflict.

  Any suggestions are welcome.

  Thanks in advance!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums so the problems occurring on Windows 7 Enterprise.

  Forum TechNet Windows 7

  Hope this information helps.

• I bought 13 PS elements and did not know that the Windows Vista operating system is not supported by this version.  How can I exchange the PS13 bought for a version of Photoshop that supports the Windows Vista operating system.

  I bought Photoshop elements 13 and did not know that the Windows Vista operating system is not supported.  How to exchange the 13 elements of Photoshop for a version of Photoshop that supports the Windows Vista operating system?

  Adobe does not sell older versions of their software, the best you could expect if the software will not work on Vista is to get a refund.

  Please see return, cancel or Exchange an order - Adobe

  http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

• What is the maximum size of the image (in pixels) a height that supports the Muse? I noticed that if the photo is too high, reduce the Muses. Thank you

  What is the maximum size of the image (in pixels) a height that supports the Muse? I noticed that if the photo is too high, reduce the Muses.

  Thank you

  If you place an image with a height or width greater than 2048 pixels - in Muse - Muse will scale the image down proportionately, limiting the larger size to 2048.

  However, if you want to use the picture to its original size, you can move the image to the desired size by dragging handles to resize, or by entering values for height and width in the strip control on top. After that, go to the active panel and locate the image, then right-click on this image in the active panel and choose "import of large size. Which would bring the image lost the original image information.

  Hope that gives you clarity on what you wanted to know.

  See you soon,.

  Vikas

• Error "could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  How do I solve this problem

  "Could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  It turns out that a Windows computer has been infected by a virus that worked its way to the server. We zapped the virus and restore the backup files.

• That supports the Z3v? How to submit bug reports?

  I love my Z3v, but I met some important bugs with the firmware and software. What is the best way to apply a report and/or characteristic bug?

  Besides, which officially supports the phone?  I tried to report a software bug to Verizon and they directed me to the manufacturer of the phone (Sony).  I then tried to get assistance through Sony and the alleged support rep, because the Z3v is a model specific to Verizon, Verizon could only support me.

  Jean-Claude is correct since the Z3v is one inflated to Z2 made exclusively for Verizon. That comes with all the bloatware of Verizon. Updates the phone yo stand out Verizon, if you need to contact them

• VConverter, version of Linux that supports the convercion.

  Is, me paso en un client, that the Version of Linux Debian, no fue soportada in el proceso of conversion.

  Tendrãn ahi the matriz of compatibility?

  Gracias

  Christian

  Las Paso of free you converter led 4 release notes.

  http://www.VMware.com/support/converter/doc/releasenotes_conv40.html#guestos

  If a part of sistemas soportados esta information operating as your need.

  Guest operating systems supported

  Converter Standalone 4.0 supports the following operating systems:

  • Windows 2000 SP4
  • Windows XP Professional (32-bit and 64-bit)
  • Windows 2003 (32-bit and 64-bit)
  • Windows Vista (32-bit and 64-bit)
  • Windows Server 2008 (32-bit and 64-bit)
  • Red Hat Enterprise Linux 2.1 (32-bit)
  • Red Hat Enterprise Linux 3.0 (32-bit and 64-bit)
  • Red Hat Enterprise Linux 4.0 (32-bit and 64-bit)
  • Red Hat Enterprise Linux 5.0 (32-bit and 64-bit)
  • Red Hat Linux Advanced Server 2.1 (32-bit)
  • SUSE Linux Enterprise Server 8
  • SUSE Linux Enterprise Server 9 (32-bit and 64-bit)
  • SUSE Linux Enterprise Server 10 (32-bit and 64-bit)
  • Ubuntu 5.x
  • Ubuntu 6.x
  • Ubuntu 7.x (32-bit and 64-bit)

  Warning: When cloning a Linux machines powered, stand-alone Converter 4.0 preserves following the source to the target file systems: ext2, ext3, reiserfs and vfat. Other systems of source files are converted to filesystem ext3 on the computer virtual target.

  André Paris

  [email protected]

  Skype: andre.paris

• Where to get the authentec fingerprint drivers for various computers laptops hp that supports the functionality of the biometric device in windows 7?

  Hello

  We build a Windows 7 SOE for a large company that takes care of many models of computers laptops hp. Each of these laptops comes with a fingerprint reader, and we would like to use the built in support of fingerprint (biometric devices) reader that is running windows 7. The models that we support are as follows:

  • HP 6910P
  • HP 6930p
  • HP 8510w
  • HP 8530w

  We tried using the drivers of fingerprint Authentec (aes2501a) on the hp website, but after the installation, the biometric device option is not in windows 7. We contacted HP about this and they said that we must use the driver coming from windows update before this option appears. After installing the driver from windows update, the option of the biometric device seemed that hp said. Therefore, because of the way that our SOE is built, we demand that the executable that is identical to that on windows update. Anyone know where we can find packages both x 64 and x 86 for this device driver, which are the same as those found when you go to update windows on these machines running windows 7? Let me know if you need any clarification.

  Thank you

  Hi Mustapha ETS.

  Step 1: Locate the stand-alone file by inserting the device model number
  a. visit http://catalog.update.microsoft.com/v7/site/Home.aspx
  in the search box, enter the model number of the perimeter search of the driver.
  c. download the right driver for your windows and install it successfully on all computers.

  Note: If there is no available stand-alone file, I'm afraid you'll have to visit update of Windows on all computers and the installation of the update done or contact the device manufacturer to obtain the driver.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Camera Raw that supports the two Nikon D800 AND D750?

  Hello! I have a Nikon D800 and I recently borrowed a D750 to test it. The problem is that I can't open the files of the D750

  because my Camera Raw does not support D750. But there is also no Camera Raw updated to support BOTH cameras at the same time.

  All solutions? I would really appreciate it! Thank you

  You need Camera raw 8.7 or higher for the D750. Which will also open files between the D800. You would need PS CS6 or higher for this, so if you do not have CS6, you have to use the free dng converter.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh

• Where to download OEL 5.6 with kernel Red Hat that supports the ACFS RAC?

  People,
  
  Hello. I want to install Oracle 11 g RAC 2 with 2 Virtual Machines whose BONES are Oracle Linux 5.6 in VMPlayer.
  
  I downloaded Oracle Linux 5.6 Media Pack for x86_64 (name of file V24479-01) of https://edelivery.oracle.com/linux.
  
  But when I install Oracle 11 g RAC 2 and run the root.sh script, it displays "ACFS is not supported on oracle-linux-version-5 - 6.0.1.
  
  Some people said that 5.6 OEL comes with 2 nuclei: the original Red Hat and Oracle UEK.
  We can choose not not to use the UEK. This means media Original Red Hat that ACFS RAC UEK and GR 11, 2 does not work.
  
  My questions are:
  
  First of all, where download OEL 5.6 with the original kernel Red Hat takes supported ACFS of GR 11, 2 CARS?
  
  Second, how to recognize the 2 nuclei (Red Hat and UEK) comes from the file V24479-01 of https://edelivery.oracle.com/?
  
  
  Thank you.

  the steps are:

  1. install the operating system, it will use the default UEK
  2 - Edit/etc/grub.conf, as described above
  3 - reboot
  4 - Check the kernel version in a terminal:

  uname -r
  

  If you did it right, IIT should be something like:

  2.6.18-238.el5
  

  but certainly not something like this:

  2.6.32-200.13.1.el5uek
  

  5 install the grid Infrastructure, then the database

  According to what you say, steps 1 to 3 are already done, all you have to do is to check the version of the kernel running and continue with the installation

• Docking station that supports the portable and desktop connection to devices

  Is there such a beast?

  In a perfect world, I could work on my desktop that is set up for my non-business related applications and using the same screens, keyboard, mouse, camera etc. that serve my cell phone when it is docked. In this way, decide to do some work work-from-home would be as simple as the Dell laptop (already equipped for docking station that I use in the office) to burst in my dock at home and poof! The monitor, etc. now serves the laptop.

  You must purchase the same base you have to work for your laptop at home. You need to disconnect you monitor, mouse, etc. and plug it into a usb cable dongle that needs to be plugged in your dock.

• Spectrum 13-4000 x 360 Convertib: why spectrum x 360 does not support the connection of facial recognition?

  This link lists the computers that support the connection of facial recognition Hello in Windows 10: http://www.windowscentral.com/here-are-all-pcs-support-windows-hello-facial-recognition-windows-10

  The spectrum of x 360 is not among them.  Is it because the camera in this laptop isn't a RealSense camera, or is it because the socket driver is missing for this machine?

  Any chance of accompanied by an upgrade of the driver of HP?

  Thank you

  Hi there @jwg,

  Thank you for visiting the Forums HP's Support and welcome! I read your message on the HP Support Forums and see that you are having problems with the connection of facial recognition on your laptop with Windows 10.

  I suggest you roll back to Windows 8.1 if you can for the moment because not all of the driver are available yet for Windows 10.

  I'm not aware of updates at the moment of the connection of facial recognition. However, the updated Windows 10 drivers will become available on your HP drivers and Downloads Page specific products as they are released and become available for HP.

  If you are unable to back up, here's a link to the HP Support Assistant if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  You could also try Windows updates. They are coming with new resolutions for these issues every day.

  Have a great day!

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas