"The specified procedure is not found."

Similar Questions

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  Hello

  you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

  check the reports on the problems and solutions

  You can do a support ticket, follow the link

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

  Microsoft product support has some tools that will be useful and can help to find a solution

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• Error on startup: "Error loading C;\windows\apakahubozerahe.dll the specified module is not found."

  Whenever I start my PC, you receive this error message; "Error loading C;\windows\apakahubozerahe.dll the specified module is not found.   How can I get rid of this? I can't find the file in c: Windows to remove and my registry cleaner does not clean it?

  He does not seem to cause any trouble and disappears when OK is hit.

  Hi Kevin!
  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Open or run"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  He helped?

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Desktop Windows Manager is disabled and the theme service is not running. Error 126: the specified module is not found. »

  I tried to install VistaOSX the theme of this site http://vista-os-x.en.softonic.com/. My current theme of vista disappeared and he turned to classic windows. I'm not able to activate Desktop Windows Manager. Error code I get everything by starting the service theme is "Windows could not start the service theme on the local computer. Error 126: the specified module is not found. »

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Error message: "error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found."

  I have an error message box that always appears at the start of my computer.  It says: "Error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found." I have a Dell Laptop Inspiron 1720 running Vista. I just 'X' it out and continue on but would like to get rid of it.  I don't know that it's touched something that needs correction.  Thank you

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• "I get this started" error loading winera32.rom the specified module is not found.

  When windows starts, this message appears "error when loading winera32.rom the specified module is not found". the rest of the windows works fine.

  It's a malware. It has been removed from your AntiVirus Scanner and registry entries are always present to start the malicious program at startup.

  Start regedit.exe and search (F3 or CTRL + F) for winera32.romand remove all the entries that you find.

  For more safety, perform a complete equipped with scanning AntiVirus as well as Microsoft Security Essentials scan your PC with Malwarebytes' Anti-Malware.

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

  I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

  No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

  Hello

  This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

  I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

  Reference:

  snapshot could not be created Details: the specified object was not found.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

  Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  See also:

  Back up and restore frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope this information helps. Response with status so that we can help you.

• causes VIX/vmrun.exe ' error: the specified version is not found "with WS 8.0.1

  vmrun.exe t ws start "Q:\VMware\REG\REG-XP3 (RC2).vmx"
  Unable to connect to the host.
  Error: The specified version is not found

  I installed in this order:

  
  Workstation 8.0.1

  VIX 1.11.0.18997

  On a Win7 x 64 SP1 box.

  There also the vSphere PowerCLI 5.0.0.3501 installed however this seems to need to ESX and vCenter, so it is useless for me.

  
  Long story short, I need vmrun maintenance tasks such as deleting snapshot which through GUI takes a.) ages, b.) pump lock your workstation / takes focus.

  
  How can I get this working again? I checked the vixwrapper - config.txt and it lists the following:

  # Workstation 8.0.0
  vmdb WS 14 8.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
  Player vmdb 14 4.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation 8.0.0 - 8.0.0 - and-vSphere - 5.0.0
  WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

  Thank you.

  I just found this same problem with Player 4.01 exaxt... VMware VIX who uses this configuration file and if the gift ' e versions EXACTLY match it flows without any usable information.

  Add this to your config file and it will work...

  # Workstation 8.0.1
  vmdb WS 14 8.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
  Player vmdb 14 4.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation 8.0.1 - 8.0.0 - and-vSphere - 5.0.0
  WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

• Unable to connect to the host.   Error: The specified version is not found

  vmrun-t esx h https://192.168.1.123/SDK u root Pei password list

  Unable to connect to the host.

  Error: The specified version is not found

  Any ideas why it does not work?  It is run on a Windows XP workstation.  The target server is on the local network and running ESXi 4.1.  The vmRun version is 7.1.2 and is installed with Workstation 7.1.2.

  I also tried Ubuntu 10.04 with vmRun from a Workstation 7.1.2 installation.  There, he also fails with the same error.

  Note that ESXi 4.1 is used to test installation is not allowed and is running in demo mode.  Management of the vSphere client works without any problem the same Windows XP workstation.

  Any help would be appreciated.  Thank you.

  You must install the full package of VIX by http://communities.vmware.com/community/developer/downloads. It contains only components to manage the workstation. Please note that I had to install in the VIX 1.10.1 order then Workstation 7.1.2 to get both to work on my Windows 7 computer.

• I get 'error loading '... C:\ProgramFiles\CommonFiles\ParetoLogic\UUS2\UUS.dll... The specified module is not found .___How can I fix it?

  I get 'error loading '... C:\ProgramFiles\CommonFiles\ParetoLogic\UUS2\UUS.dll... The specified module could not be found.

  How can I fix it?

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/ MS - MVP - Elephant Boy computers - don't panic!

• error starting buvoemd.dll: "the specified module is not found." (please help. some of my games have not worked since this error has been appearing after start)

  This error has been appearing after starting:

  "Error loading C:\WINDOWS\system32\buvoemd.dll".

  The specified module could be found.

  Can we fix this or send me a copy of the module or anything like that?

  (please help some of my games do not have given that this error has been appearing after start)

  Thank you

  There is no file with this name in Windows XP.  It was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Error: "error loading C:\Users\K***\cnmss"the specified module is not found.

  Original title: RunDLL
  I get "error loading C:\Users\K***\cnmss".

  The specified module could not be found

  What should I do to make it better?

  Hello
   
  
  1. when exactly you get this error message?
  2 have you made any changes to the computer before the show?
  Step 1:
  
  Check if the problem persists in safe mode.
  Reference:
  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  Step 2:
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• What does the message "error during loading, the specified module is not found means?

  The message I receive when I connect to my computer.

  (1) could not load or run C/Julia/App.Data/Local/Temp/Csrss.exe'Specifed in the registry.  Make sure that the file exists on your computer or remove the reference to it in the registry.

  (2) RunDLL - "error loading C:/users/Julia/AppData/Local/dsDEXPrt.dll - the specified module could not be found

  (3) then, I get the message asking me to buy a full version of Vista Internet Security 2012, and as a result, I was not able to set up the internet.

  What do you advise?

  Your computer is infected.  If you still have problems after following the instructions above, you can receive free help online to one of the following online forums that specialize in the removal of malware.

  Malware removal Forum
  Safer Networking Forum

  What is the Tech Forum