Requirement of 12 CPU Oracle

Similar Questions

• CPU Oracle patch process for Oracle shared houses-Stand alone case

  Hello-

  I have a scenario where I apply CPU/Security Patch [CPUOCT2013] on Oracle 11.2.0.3.0 on Linux. I have 3 databases SID1, SID2 & SID3 all sharing the same $ORACLE_HOME and contain the init and spfiles files in the same directory of $ORACLE_HOME/dbs and other. Now, I need to apply the patch on a SINGLE instance of SID1 (for which I have approval for the stopping of the DB, which is a requirement for the processor). What is the method to be applied to the single SID and not others? I know that we apply patch to ORACLE_HOME, so I am confused, that way I can move forward. Please respond with your expertise and experience.

  Thank you

  Your process sounds good to me - the best way to check is to do this in a test environment that is closest (if not identical) to the production as possible. You will also need to update file/etc/oratab as necessary to reflect the new OH

  The environment variables that I refer above are at the OS level, not in the init.ora. See Oracle database administration. If there are any values in the init.ora that point to the old OH (I can't think at all), who will have to be changed too.

  HTH
  Srini

• ESX required 64-bit cpu capable of 64-bit operation

  Hi all

  Newbie trying to learn,

  I want to install esx vm on 7 workstation, and I get this message. My os is win7

  Thank you

  You will need to run Workstation on a 64 bit OS and the motherboard will have hardware virtualization. Check the BIOS to see if the hardware virtualization is supported and that it is enabled.

• Patch 4247037 required component missing oracle.sdo.locator, 11.2.0

  Hi Hussein & Srini,
  
  You need help again once. After installation 11.2.0.3 software x86_64 (files 1of7.zip and 2of7.zip of patch 10404530) & run the example setup...
  part of upgrading the version of database Vision of 11.1.0.7 to 11.2.0.3 EBS 12.1.1 according to [837570.1 ID] and MOS Doc 1058763.1 }
  
  I followed the steps mentioned in http://chavalis.blogspot.in/2012/10/upgrading-r12-11-vision-database.html#! /2012/10/upgrading-R12-11-vision-database.html
  
  When I try to apply it patch 4247037 get this error... Please advise..
  
  [oracle@ebs ~] $ echo $ORACLE_HOME
  /Oracle/vis/DB/tech_st/11.1.0
  
  
  [oracle@ebs ~] $ /oracle/VIS/db/tech_st/11.2.0.3/OPatch/opatch applies/home/oracle/4247037
  
  
  Patch 4247037 : Required or missing components: [oracle.sdo.locator, 11.2.0.3.0]
  [April 6, 2013 02:36:25] [Error during the prerequisite to apply phase] Detail: YES - 67074:ApplySession failed when prior checks: checking prerequisites 'CheckApplicable' failed.
  [April 6, 2013 02:36:25] YES - 67035:System intact, OPatch will not try to restore the system
  [Apr 6, 2013 2:36:25 AM] --------------------------------------------------------------------------------
  [April 6, 2013 02:36:25] The following warnings occurred during execution of OPatch:
  [April 6, 2013 02:36:25] 1) YES - 67620:Interim patch 4247037 is a superset of the patches [4247037] in the House of the Oracle
  [Apr 6, 2013 2:36:25 AM] --------------------------------------------------------------------------------
  [April 6, 2013 02:36:25] Finishing ApplySession on sat APR 06 02:36:25 GMT + 05:30 2013
  [April 6, 2013 02:36:25] Total time spent waiting for user input is 0 seconds. Finish at Sat Apr 06 02:36:25 GMT + 05:30 2013
  [April 6, 2013 02:36:25] Location of the log file: /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2013-04-06_02-36-18AM.log
  [April 6, 2013 02:36:25] Description of the battery: oracle.opatch.PrereqFailedException: Prerequisites check 'CheckApplicable' failed.
  [April 6, 2013 02:36:25] StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:4835)
  [April 6, 2013 02:36:25] StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3888)
  [April 6, 2013 02:36:25] StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5853)
  [April 6, 2013 02:36:25] StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1787)
  [April 6, 2013 02:36:25] StackTrace: oracle.opatch.OPatch.main(OPatch.java:651)
  
  
  
  Could not understand even after going the Readme in the patch... Do I need to set the Oracle_Home new Oracle_home to /oracle/VIS/db/tech_st/11.2.0.3 because it is not specifically mentioned
  in the Readme of the Patch or http://chavalis.blogspot.in/2012/10/upgrading-r12-11-vision-database.html#! 2012/10/upgrading-R12-11-vision-database.html...
  Or maybe I couldn't do... Please suggest
  
  
  Thank you
  Priya
  
  Published by: 971054 on April 5, 2013 14:39

  Patching component oracle.sdo.locator, 11.2.0.3.0...
  4247037 patch applied successfully
  Location of the log file: /oracle/VIS/db/tech_st/11.2.0.3/cfgtoollogs/opatch/opatch2013-04-06_03-07-37AM.log

  OPatch succeeded.

  This indicates that the hotfix has been applied with success - you can also confirm the same by issuing the command "opatch lsinventory.

  I don't know if it's the right way to do it. as a parameter the ORACLE_HOME to the new is not mentioned in the Readme of the Patch file
  Or certainly I could not understand... Please suggest

  As you have downloaded the patch for 11.2.0.3 you need to set your ORACLE_HOME to the 11.2.0.3 a. And the Readme of the fix for the 11.2.0.3 version clearly indicates (Product Version #: 11.2.0.3)-https://updates.oracle.com/Orion/Services/download?type=readme&aru=14211388

  Thank you
  Hussein

• Oracle database 11 g 2 fails to check pre-required for packages

  I try to install Oracle database 11 g 2 for IOM.
  
  But sine qua non, check fails to say some packages failed rpm.
  
  I tried to install these missed packets but not able to do because of dependencies between packages.
  
  Please help me find rpm packages required for the database.

  Check this link for the list of required packages rpm for Oracle database 11 g 2.

  http://www.Oracle-base.com/articles/11g/Oracle-DB-11gr2-installation-on-Oracle-Linux-6.php

  See this link for the Linux installation steps.
  http://kamranagayev.com/2011/03/21/step-by-step-installing-Oracle11g-on-Linux/

• Hardware and software configuration for Oracle EBS implementation

  Hello
  
  I'm new on implementations in Oracle.
  
  We must implement Oracle EBS with modules AR, AP, GL, INV, purchases, HRMS, payroll, and discoverer.
  There will be * users * of 50 to 100 using this system.
  We would create two instances(PROD and TEST).
  
  I saw tasked to obtain the following information: -.
  (* 1) procure.* servers
  (* 2) amount of RAM required.*
  (* 3) disk space required.*
  (* 4) CPU cores *.
  (* 5) best Option for OS.*
  
  Please can someone help.
  
  Thanks in advance

  PL see many previous discussions on this topic

  https://forums.Oracle.com/forums/search.jspa?threadID=&q=hardware+and+sizing&objid=C3&DateRange=all&userid=&NumResults=15

  Most major hardware vendors (Oracle/Sun, HP, IBM, etc.) provide a free service where they can size the material of your entries and your requirements

  HTH
  Srini

• installation of Oracle 11 g grid control

  Can I install base data, weblogic and repository grid control in a single server, right? Based on the doc for oracle grid control, it seems good. Please notify.
  Thank you
  
  S.

  Hello

  Which option is the best?

  If you have a CMS and repository in different servers, you can have a more scalable configuration. More, you can also install several WHO (on multiple servers - 1 SGD per host) as shown in this overview:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e15838/overview.htm#CJAHHFEA

  Of course, this type of architecture is more powerful and allow you to give more resources (CPU, memory) to EM Grid control. If you have hundreds of targets to monitors and dozens of users who can connect and use EM grid control, it may be useful to use this feature ( load balancing, several WHO,...):

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/install_addln_oms_slnt.htm#BABBGGAH

  However, if you have just a few tens of targets and a few users who may connect occasionally to the EM grid control, you can also install all {repository + WHO} on the same server.

  Anyway, in all cases, you must take into account related Harware requirements:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e15838/appdx_hardware_reqs.htm#CACJBDGF

  And also, it is important to know the Port number used by any component to communicate with each other:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/firewalls.htm#i1005951

  Hope this helps.
  Best regards
  Jean Valentine

• Oracle 10g in VMware hangs intermittently

  ORACLE V10.2.0.4.0 - 64 bit
  Running on a Windows Server 2003 virtual server (VMware)
  2 GB of RAM is available for this virtual machine.
  
  I have two separate facilities in the configurations above. The two instances are blocking intermittently. I tried to play with memory and on the virtual machine and within the Oracle, but it's not helping.
  
  There are messages in the alert log file:
  
  Mon June 22 at 16:07:12 2009
  Errors in the c:\oracle\product\10.2.0\admin\psdmi\bdump\psdmi_s002_1216.trc file:
  [ORA-00600: internal error code, arguments: [17099] [] [], [], [], [], []]
  [ORA-00600: internal error code, arguments: [17099] [] [], [], [], [], []]
  
  Mon June 22 at 16:07:12 2009
  Errors in the c:\oracle\product\10.2.0\admin\psdmi\bdump\psdmi_s003_2984.trc file:
  
  Mon June 22 at 16:07:13 2009
  Errors in the c:\oracle\product\10.2.0\admin\psdmi\bdump\psdmi_s002_1216.trc file:
  [ORA-00600: internal error code, arguments: [17099] [] [], [], [], [], []]
  
  
  
  Info from psdmi_s002_1216.trc
  
  C:\oracle\product\10.2.0\admin\psdmi\bdump\psdmi_s002_1216.TRC dump file
  Mon June 22 at 16:07:12 2009
  ORACLE V10.2.0.4.0 - Production of 64-bit vsnsta = 0
  vsnsql = 14 vsnxtr = 3
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
  With partitioning, OLAP, Data Mining and Real Application Testing options
  Windows Server 2003 V5.2 Service Pack 2 Version
  CPU: 2 - type 8664, 2 physical cores
  Process affinity: 0 x 0000000000000000
  Memory (success/Total): Ph: 1142 M / 2047 M, Ph + FCP: 3067 M / 3964 M
  Instance name: psdmi
  
  Redo thread mounted by this instance: 1
  
  Oracle process number: 16
  
  Windows thread ID: 1216, image: ORACLE. EXE (S002)
  
  
  ACTION NAME :() 16:07:12.628 2009-06-22
  MODULE NAME: (java.exe) 2009-06-22 16:07:12.628
  SERVICE NAME: (PSDMI) 2009-06-22 16:07:12.628
  SESSION ID: (117.13) 2009-06-22 16:07:12.628
  16:07:12.628 2009-06-22
  ksedmp: internal or fatal error
  [ORA-00600: internal error code, arguments: [17099] [] [], [], [], [], []]
  [ORA-00600: internal error code, arguments: [17099] [] [], [], [], [], []]
  For this session current SQL statement:
  Start: 1: = JAVA_XA.xa_start_new(:2,:3,:4,:5,:6); end;
  -PL/SQL call stack-
  the line object
  serial number of handle
  Package body 8 000007FF9F32D728 SYS. JAVA_XA
  000007FF9F32F488 1 anonymous block
  check the file c:\oracle\product\10.2.0\db_1\rdbms\trace\psdmi_ora_0.trc trace for preloading the .sym file messages
  -Call trace stack memory-
  call call entered the argument values in hex
  location point type (? means dubious value)
  -------------------- -------- -------------------- ----------------------------
  ksedmp + 663 APPEAL? ksedst + 003C878B8 55 01185F7F8 000000000
  000000000
  ksfdmp + 19 CALL? + 000000003 663 00F08F650 011CE12F8 ksedmp
  003CACC80
  kgeriv + 184 APPEAL? ksfdmp + 19 000000000 000000000
  7FFA3E635C0 000000000
  kgesiv + 102 APPEAL? + 184 000000000 00001E658 011861690 kgeriv
  0009939D 3
  
  
  
  Anyone seen this before? I have googled and looked for the error, but I have not found anything useful. I have databases Oracle similar setup running in W3K on a physical box and that works very well and makes me think if it has something to do with running in VMware.
  
  Any pointers/suggestions will be greatly appreciated.

  Bad situation. You encounter internal errors, which generally require the help of Oracle support. Oracle VMware is not supported, so support will refuse to help him. They will ask to reproduce the problems in a supported environment, but here, everything is fine - as you say.

  It's always a risk to run Oracle software in an unsupported environment.

  Werner

• SSM-IPS40 new show 50% CPU without traffic

  We are poised to deploy 2 ASA 5585 s with SSM-IPS40 modules.  IDM reports 8 CPU 100% usage for a total of 50% of the CPU usage.  IDM it brings by mistake?  I'm not finding a way to check on the CLI.  There is no traffic through these devices at the moment.

  Thanks in advance for any help.

  Dennis

  From engine E3 updates, the IPS uses a different algorithm to manage his idle

  time and spend more time vote to reduce the latency of packets. Changes included E3, one

  Difficulty with a problem with a latency during low traffic loads. The fix was to have sensorApp

  Check buffers packets on the driver more often. So the package could be removed from the

  queue the fastest rider for analysis rather than wait for the pilot fill the queue

  before you pass it to sensorApp. This increased audit results in an increase in

  CPU usage.

  The measurement of the CPU usage can / will be high, due to the amendment to

  E3 engine, remote sensing interfaces for more polling data. It's OK like if/when the

  sensorApp process requires more time CPU, the amount that is using the mark is

  scaling dynamically to useful to determine the actual workload of sensor.

  So don't worry about the HIGH CPU but check the percentage of overhead on the IPS.

  Please report if there are still unanswered questions.

  ,

  Sachin

• Adding extension to Interface to 4235 4FE - requirements, warnings?

  I'm under version 4.1 (1) S48 on 4235 sensor.

  I want to monitor two separate subnets in the DMZ with a sensor. 4.1 supports several interfaces of promiscuity, it seems that the addition of the 4FE interface card support this well. Bandwidth is not really a concern, these connections are not heavily used T - 1 connections.

  My questions are related to the impact on the sensor. Will there be additional requirements of memory/CPU by adding more surveillance interfaces? I noticed that it also seem to be a new plug-in memory available for sensors, I was wondering if this is related?

  From a point of view of configuration, I assumed that, for the moment, the same signature settings will be applied to all virtual devices (virtual sensor is equivalent to a physical interface of remote sensing)? It is very good for the current application, but I wonder if it is will be supported for different signature by virtual sensor parameters in the future?

  Any reserves, traps, etc. that you can share on the displacement of several interfaces of remote sensing would be appreciated.

  Thank you

  Chad

  Traps to keep in mind:

  4FE card is attached to four 10/100 ports. The standard onboard sniffing port is a 10/100/1000. So be aware of the limit of 100 Mbps on FE 4 10/100 ports.

  Since you are dealing with only T1 lines that won't be a problem for you.

  The performance of the IDS-4235 is based on the total bandwidth of all interfaces combined.

  If I remember correctly the IDS-4235 performance rating is about 250 Mbps.

  So let's say that you plug in 3 interfaces of the 4FE, then 3 interfaces could send up to 300 Mbps of traffic and overwhelm the sensor performance.

  It could be worse if we consider the 1000 Mbps card on board. So, theoretically with all 4 plugged FEs and the edge sniffing plugged as well, you could theoretically send 1.4 Gbps of traffic to this sensor years 250Mbps seriously overwhelm.

  In you case to connect only 2 ports currency limit you the total maximum rate 200 Mbps (still more low whereas you have T1 connections) so it will not be a problem for you, with performances of the 4235 250 Mbit/s.

  With regard to the other CPU/memmory. There is no additional CPU or available for the 4235 memmory. The additional memmory was only for old models of 4210 and 4220.

  You do not need anyway. 250 Mbit/s performance is based on the provided memmory and cpu regardless of the number of interaces since it's overall performance and not by the performance of the interface.

  When version 4.1 is loaded with the 4FE each of the interfaces is usually attributed to "interface group 0" and default is off (stop). You should make sure that the interface you are using are indeed assigned to the "interface group 0" and then activate the interfaces that you want to use (no downtime).

  You are right to assume that version 4.1 supports a single virtual sensor (single set of configurations of signature) which is applied to all interfaces.

  Indeed the virtual sensor is applied to "interface group 0" and all interfaces are placed in group 0. The only group 0 is currently supported for a single virtual sensor is currently supported.

  Support for multiple virtual devices / groups is planned for a future release (could not begin to speculate when that can happen).

  Since a single virtual sensor is used, it is sometimes confusing determine on what interface things occurred.

  Each event lists on which interface the packet that triggered the alert has been detected. SO for example with a sweep of ping host first 4 pings can be seen on an interface but the 5th ping that triggers the alert can be seen on the second interface; This translates into the second interface in the alert.

  Marco

• Ask about Oracle certification for the Admin path

  Hi I have the underside of certifications under my belt:-1. Oracle Certified Associate of PL/SQL Developer 2. Oracle PL/SQL Developer certified professional that I would give Oracle Database 11 g administration Associate certification. I see that I need to give exams 1Z0-051 and 1Z0-052 for. So my question is whther I need to give Z051 review? Keeping in mind, I traced level OCP, authorized as a PL/SQL Developer. Thanks in advance...

  How can I get confirmation on this officially?

  See the FAQ:

  https://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=82

  Look for the "SQL Fundamentals".  One of the questions will be: "How long can I use an exam to earn a certification? "Exam results expire?"

  The answer is: "do not expire the results of exams, but certifications are retiring, and that affects your older test results will help you to get certified or not. "

  If a specific review meets a requirement in a current certification path, it does not matter if you have passed the exam. "For example, if you have taken SQL, # 1Z0-001 review in 1997, you can always use it meets the requirement of SQL for Oracle database current certification."

  If you do not trust that - the moderator of the forum, Brandye, can come in a day or two to confirm what I said.  However, there is no doubt.  The question comes up fairly often.  In fact, I wrote a blog on this subject for more than a year (although this would not even "official", of course):

  Preparation of Oracle Certification: Oracle SQL Fundamentals exams and database versions

• failure of the preliminary checks for Oracle Real Application Cluster 12 C.

  Hi all. Please, help to investigate and resolve. Thank you.

  [grid@orac1 grid] $./runcluvfy.sh stage pre - crsinst - orac1, orac2 n - correction-verbose

  Conducting due diligence to install cluster services

  Audit accessibility of node...

  Check: Accessibility of node of the node 'orac1 '.

  Accessible destination node?

  ------------------------------------  ------------------------

  orac1                                 yes

  orac2                                 yes

  Result: Check accessibility node from node 'orac1 '.

  Verify the equivalence of the user...

  Check: Equivalence for the user "grid."

  Status of node name

  ------------------------------------  ------------------------

  orac2 spent

  orac1 spent

  Result: Use CONTROL passed to user equivalence "grid."

  Verify node connectivity...

  Checking the configuration of the hosts file...

  Status of node name

  ------------------------------------  ------------------------

  orac1 spent

  orac2 spent

  The hosts config file verification successful

  Interface of the node information to "orac1".

  Name address IP subnet gateway Gateway bat HW address MTU

  ------ --------------- --------------- --------------- --------------- ----------------- ------

  eth0 10.154.137.101 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:28:D1:1F 1500

  eth1 10.154.138.101 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:51:E8:B9 1500

  eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:5 B: D7:29 1500

  Interface of the node information to "orac2".

  Name address IP subnet gateway Gateway bat HW address MTU

  ------ --------------- --------------- --------------- --------------- ----------------- ------

  eth0 10.154.137.102 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:7F:C8:70 1500

  eth1 10.154.138.102 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:9 D: 27:D8 1500

  eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:6E:92:43 1500

  Check: Subnet node connectivity "10.154.137.0."

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1 [10.154.137.101] orac2 [10.154.137.102] Yes

  Result: Connectivity node passed to subnet "10.154.137.0" with one or more nodes orac1, orac2

  Check: The subnet '10.154.137.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1:10.154.137.101 orac2:10.154.137.102 failed

  ERROR:

  PRVF-7617: node connectivity between "orac1: 10.154.137.101" and "orac2: 10.154.137.102" failed

  Result: Check failed for the '10.154.137.0' subnet TCP connectivity

  Check: Subnet node connectivity "10.154.138.0."

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1 [10.154.138.101] orac2 [10.154.138.102] Yes

  Result: Connectivity node passed to subnet "10.154.138.0" with one or more nodes orac1, orac2

  Check: The subnet '10.154.138.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1:10.154.138.101 orac2:10.154.138.102 failed

  ERROR:

  PRVF-7617: node connectivity between "orac1: 10.154.138.101" and "orac2: 10.154.138.102" failed

  Result: Check failed for the '10.154.138.0' subnet TCP connectivity

  Check: Subnet node connectivity "10.0.4.0."

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1 [10.0.4.15] orac2 [10.0.4.15] Yes

  Result: Connectivity node passed to subnet "10.0.4.0" with one or more nodes orac1, orac2

  Check: The subnet '10.0.4.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  orac1:10.0.4.15 orac2:10.0.4.15 failed

  ERROR:

  PRVF-7617: node connectivity between "orac1: 10.0.4.15" and "orac2: 10.0.4.15" failed

  Result: Check failed for the '10.0.4.0' subnet TCP connectivity

  Interfaces available on subnet "10.0.4.0" who are likely candidates for VIP are:

  orac1 eth2:10.0.4.15

  orac2 eth2:10.0.4.15

  CAUTION:

  Could not find an appropriate interface for the private interconnection range

  Checking consistency of subnet mask...

  Verification of consistency for the subnet mask for subnet "10.154.137.0."

  Verification of consistency for the subnet mask for subnet "10.154.138.0."

  Verification of consistency for the subnet mask for subnet "10.0.4.0."

  Verification of consistency for the last subnet mask.

  ERROR:

  GLWB-1172: the IP "10.0.4.15" is on more than one interface 'eth2, eth2' nodes 'orac2, orac1 '.

  Result: Check the node has no connectivity

  Checking for multicast communication...

  Verification of the subnet "10.154.137.0" for multicast with "224.0.0.251. multicast group communication

  GLWB-11138: Interface '10.154.137.101' on 'orac1' node is not able to communicate with interface '10.154.137.101' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.137.101' on 'orac1' node is not able to communicate with interface '10.154.137.102' on 'orac2' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.137.102' on 'orac2' node is not able to communicate with interface '10.154.137.101' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.137.102' on 'orac2' node is not able to communicate with interface '10.154.137.102' on 'orac2' node to the multicast group "224.0.0.251.

  Verification of the subnet "10.154.138.0" for multicast with "224.0.0.251. multicast group communication

  GLWB-11138: Interface '10.154.138.101' on 'orac1' node is not able to communicate with interface '10.154.138.101' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.138.101' on 'orac1' node is not able to communicate with interface '10.154.138.102' on 'orac2' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.138.102' on 'orac2' node is not able to communicate with interface '10.154.138.101' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.154.138.102' on 'orac2' node is not able to communicate with interface '10.154.138.102' on 'orac2' node to the multicast group "224.0.0.251.

  Verification of the subnet "10.0.4.0" for multicast with "224.0.0.251. multicast group communication

  GLWB-11138: Interface '10.0.4.15' on 'orac1' node is not able to communicate with interface '10.0.4.15' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.0.4.15' on 'orac1' node is not able to communicate with interface '10.0.4.15' on 'orac2' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.0.4.15' on 'orac2' node is not able to communicate with interface '10.0.4.15' on 'orac1' node to the multicast group "224.0.0.251.

  GLWB-11138: Interface '10.0.4.15' on 'orac2' node is not able to communicate with interface '10.0.4.15' on 'orac2' node to the multicast group "224.0.0.251.

  Checking configuration ASMLib.

  Status of node name

  ------------------------------------  ------------------------

  orac1 spent

  orac2 spent

  Result: Check the configuration of ASMLib passed.

  Check: Total memory

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 GB 5,714 (5991520,0 KB) increased from 4 GB (4194304,0 KB)

  orac1 GB 5,714 (5991520,0 KB) increased from 4 GB (4194304,0 KB)

  Result: The total past memory check

  Check: Available memory

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  transmitted orac2 Go 5,2293 (5483324,0 KB) 50 MB (51200,0 KB)

  transmitted orac1 Go 5,1456 (5395600,0 KB) 50 MB (51200,0 KB)

  Result: Available past memory check

  Check: Swap space

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 GB 6,125 (6422520,0 KB) from GB 5,714 (5991520,0 KB)

  orac1 GB 6,125 (6422520,0 KB) from GB 5,714 (5991520,0 KB)

  Result: Check the Swap space past

  Check: Disk space for "orac2: / usr, orac2: / var, orac2: / etc, orac2: / sbin, orac2: / tmp '.

  Path node name Mount point available requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac2/usr / 37,8398 GB GB 1,0635 spent

  orac2/var / 37,8398 GB GB 1,0635 spent

  orac2/etc / 37,8398 GB GB 1,0635 spent

  orac2/sbin / 37,8398 GB GB 1,0635 spent

  orac2/tmp / 37,8398 GB GB 1,0635 spent

  Result: Free past to check the disk space ' orac2: / usr, orac2: / var, orac2: / etc, orac2: / sbin, orac2: / tmp '.

  Check: Disk space for "orac1: / usr, orac1: / var, orac1: / etc, orac1: / sbin, orac1: / tmp '.

  Path node name Mount point available requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac1/usr / 32,4382 GB GB 1,0635 spent

  orac1/var / 32,4382 GB GB 1,0635 spent

  orac1/etc / 32,4382 GB GB 1,0635 spent

  orac1/sbin / 32,4382 GB GB 1,0635 spent

  orac1/tmp / 32,4382 GB GB 1,0635 spent

  Result: Free past to check the disk space ' orac1: / usr, orac1: / var, orac1: / etc, orac1: / sbin, orac1: / tmp '.

  Check: Existence of user for "grid".

  Name of State comment node

  ------------  ------------------------  ------------------------

  orac2 past exists (1100)

  orac1 past exists (1100)

  Check for multiple users with the value of the UID 1100

  Result: Check for multiple users with the value of the UID 1100 spent

  Result: Use existence CONTROL passed to 'grid '.

  Check: Existence of group 'oinstall '.

  Name of State comment node

  ------------  ------------------------  ------------------------

  orac2 passed exists

  orac1 passed exists

  Result: Existence of group check passed for "oinstall".

  Check: Existence of group for "dba".

  Name of State comment node

  ------------  ------------------------  ------------------------

  orac2 passed exists

  orac1 passed exists

  Result: Existence of group check passed for "dba".

  Check: the members of the user 'grid' group 'oinstall' [primary]

  Name of node user is group is user group primary status

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac2 Yes Yes Yes Yes past

  orac1 Yes Yes Yes Yes past

  Result: Membership search for "grid" user in the group 'oinstall' [as Primary] spent

  Check: Membership of the user "grid" in a group 'dba '.

  Name of node user is group are users in a group situation

  ----------------  ------------  ------------  ------------  ----------------

  orac2 Yes Yes Yes past

  orac1 Yes Yes Yes past

  Result: Check for user "grid" in group membership 'dba' spent

  Tick: Run level

  Name of the node run status level required

  ------------  ------------------------  ------------------------  ----------

  orac2         5                         3,5                       passed

  orac1         5                         3,5                       passed

  Result: Run control the level of the past

  Check: Hard limits for "file descriptors open maximum".

  Node name Type requested State available

  ----------------  ------------  ------------  ------------  ----------------

  4096, 65536 failed hard orac2

  4096, 65536 failed hard orac1

  Result: Hard limits check failed for 'file descriptors open maximum.

  Check: Limits Soft for "file descriptors open maximum".

  Node name Type requested State available

  ----------------  ------------  ------------  ------------  ----------------

  1024 1024 soft orac2 spent

  sweet orac1 4096 1024 spent

  Result: Soft limits check passed for "file descriptors open maximum".

  Check: Hard limits for "maximum user processes.

  Node name Type requested State available

  ----------------  ------------  ------------  ------------  ----------------

  46654 16384 hard orac2 spent

  46654 16384 hard orac1 spent

  Result: Verification of limits hard to last for "maximum user process.

  Check: Limits Soft for "maximum user process.

  Node name Type requested State available

  ----------------  ------------  ------------  ------------  ----------------

  orac2 1024-2047 soft failed

  orac1 1024-2047 soft failed

  Result: Limits Soft check failed for 'maximum process of the user.

  Control: System Architecture

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 x86_64 x86_64 spent

  orac1 x86_64 x86_64 spent

  Result: Verification of the system architecture past

  Control: Kernel Version

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2-2.6.32 - 279.el6.x86_64 2.6.32 spent

  orac1-2.6.32 - 279.el6.x86_64 2.6.32 spent

  Result: Last kernel version control

  Check: Parameter of kernel for 'semmsl.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac1 250 250 250 spent

  orac2 250 250 250 spent

  Result: Check of kernel parameter passed to "semmsl.

  Check: Parameter of kernel for 'semmns.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  32000 32000 32000 orac1 spent

  32000 32000 32000 orac2 spent

  Result: Check kernel parameter passed to "semmns.

  Check: Parameter of kernel for 'semopm.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac1 100 100 100 spent

  orac2 100 100 100 spent

  Result: Check kernel parameter passed to "semopm.

  Check: Parameter of kernel for 'semmni.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac1 128 128 128 spent

  orac2 128 128 128 spent

  Result: Check of kernel parameter passed to "semmni.

  Check: "Package" kernel parameter

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  4398046511104 4398046511104 3067658240 orac1 spent

  4398046511104 4398046511104 3067658240 orac2 spent

  Result: Check of kernel parameter passed to 'package '.

  Check: Parameter of kernel for "shmmni(5)."

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  4096-4096-4096 orac1 spent

  4096-4096-4096 orac2 spent

  Result: Check of kernel parameter passed to 'shmmni(5) '.

  Check: "Shmall" kernel parameter

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  4294967296 4294967296 599152 orac1 spent

  4294967296 4294967296 599152 orac2 spent

  Result: Check kernel parameter passed to "shmall.

  Check: Parameter of kernel "file-max.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  6815744 6815744 6815744 orac1 spent

  6815744 6815744 6815744 orac2 spent

  Result: Check of kernel parameter passed to 'file-max.

  Check: "Ip_local_port_range" kernel parameter

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  orac1 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed

  orac2 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed

  Result: Check of kernel parameter passed to «ip_local_port_range»

  Check: Parameter of kernel for "rmem_default."

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  262144 262144 262144 orac1 spent

  262144 262144 262144 orac2 spent

  Result: Check of kernel parameter passed to 'rmem_default '.

  Check: "Rmem_max" kernel parameter

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  4194304 4194304 4194304 orac1 spent

  4194304 4194304 4194304 orac2 spent

  Result: Check of kernel parameter passed to «rmem_max»

  Check: Parameter of kernel for "wmem_default."

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  262144 262144 262144 orac1 spent

  262144 262144 262144 orac2 spent

  Result: Check of kernel parameter passed to 'wmem_default '.

  Check: "Wmem_max" kernel parameter

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  1048576 1048576 1048576 orac1 spent

  1048576 1048576 1048576 orac2 spent

  Result: Check kernel parameter passed to "wmem_max.

  Check: Parameter of kernel for "aio-max-nr.

  Current name configured node comment of the requested State

  ----------------  ------------  ------------  ------------  ------------  ------------

  1048576 1048576 1048576 orac1 spent

  1048576 1048576 1048576 orac2 spent

  Result: Check of kernel parameter passed to "aio-max-nr.

  Check: Existence of package for "binutils".

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  binutils - 2.20.51.0.2 - 5.34.el6 orac2 binutils - 2.20.51.0.2 spent

  binutils - 2.20.51.0.2 - 5.34.el6 orac1 binutils - 2.20.51.0.2 spent

  Result: Package of checking for "binutils".

  Check: Existence of package for "compat-libcap1.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 compat-libcap1 - 1.10 - 1 compat-libcap1 - 1.10 spent

  orac1 compat-libcap1 - 1.10 - 1 compat-libcap1 - 1.10 spent

  Result: Package of checking for "compat-libcap1.

  Control: Existence of package for "compat-libstdc ++-33 (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 compat-libstdc ++ - 33 (x86_64) - 3.2.3 - 69.el6 compat-libstdc ++ - 33 (x86_64) - 3.2.3 spent

  orac1 compat-libstdc ++ - 33 (x86_64) - 3.2.3 - 69.el6 compat-libstdc ++ - 33 (x86_64) - 3.2.3 spent

  Result: Package of checking for "compat-libstdc ++-33 (x86_64).

  Control: Existence of package for 'libgcc (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 libgcc (x86_64) - 4.4.7 - 11.el6 libgcc (x86_64) - 4.4.4 spent

  orac1 libgcc (x86_64) - 4.4.7 - 11.el6 libgcc (x86_64) - 4.4.4 spent

  Result: Package of checking for 'libgcc (x86_64).

  Control: Existence of package for 'libstdc ++ (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 libstdc ++ (x86_64) - 4.4.7 - 11.el6 libstdc ++ (x86_64) - 4.4.4 spent

  orac1 libstdc ++ (x86_64) - 4.4.7 - 11.el6 libstdc ++ (x86_64) - 4.4.4 spent

  Result: Package of checking for 'libstdc ++ (x86_64).

  Control: Existence of package for 'libstdc ++ - devel (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 libstdc ++ - devel (x86_64) - 4.4.7 - 11.el6 libstdc ++ - devel (x86_64) - 4.4.4 spent

  orac1 libstdc ++ - devel (x86_64) - 4.4.7 - 11.el6 libstdc ++ - devel (x86_64) - 4.4.4 spent

  Result: Package of checking for 'libstdc ++ - devel (x86_64).

  Check: Existence of package for "sysstat".

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  sysstat - 9.0.4 - sysstat - 9.0.4 spent 20.el6 orac2

  sysstat - 9.0.4 - sysstat - 9.0.4 spent 20.el6 orac1

  Result: Package of checking for "sysstat".

  Check: Existence of package for 'gcc '.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  4.4.7 - gcc - 11.el6 orac2 gcc - 4.4.4 spent

  4.4.7 - gcc - 11.el6 orac1 gcc - 4.4.4 spent

  Result: Package of checking for "gcc".

  Check: Package of existence 'gcc - c++.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 gcc - c++ - 4.4.7 - 11.el6 gcc - c++ - 4.4.4 spent

  orac1 gcc - c++ - 4.4.7 - 11.el6 gcc - c++ - 4.4.4 spent

  Result: Package of checking for "gcc - c++.

  Check: Existence of package for 'ksh '.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  ksh-20120801 - 21.el6.1 orac2 spent ksh...

  ksh-20120801 - 21.el6.1 orac1 spent ksh...

  Result: Package of checking for "ksh".

  Check: Existence of package to 'make it '.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  make orac2 make - 3.81 - 20.el6 - 3.81 spent

  make orac1 make - 3.81 - 20.el6 - 3.81 spent

  Result: Package of verification of existence moved to 'make it '.

  Control: Existence of package for 'glibc (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 glibc (x86_64)-2, 12 - 1.149.el6 glibc (x86_64)-2,12 spent

  orac1 glibc (x86_64)-2, 12 - 1.149.el6 glibc (x86_64)-2,12 spent

  Result: Package of checking for "glibc (x86_64).

  Control: Existence of package for 'glibc-devel (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 glibc-devel (x86_64)-2, 12 - 1.149.el6 glibc-devel (x86_64)-2,12 spent

  orac1 glibc-devel (x86_64)-2, 12 - 1.149.el6 glibc-devel (x86_64)-2,12 spent

  Result: Package of checking for "glibc-devel (x86_64).

  Control: Existence of package for "libaio (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 (x86_64) - 0.3.107 - 10.el6 libaio libaio (x86_64) - 0.3.107 spent

  orac1 (x86_64) - 0.3.107 - 10.el6 libaio libaio (x86_64) - 0.3.107 spent

  Result: Package of checking for "libaio (x86_64).

  Control: Existence of package for "libaio-devel (x86_64).

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 libaio-devel (x86_64) - 0.3.107 - 10.el6 libaio-devel (x86_64) - 0.3.107 spent

  orac1 libaio-devel (x86_64) - 0.3.107 - 10.el6 libaio-devel (x86_64) - 0.3.107 spent

  Result: Package of checking for "libaio-devel (x86_64).

  Check: Existence of package for 'nfs-utils '.

  Requested State available node name

  ------------  ------------------------  ------------------------  ----------

  orac2 nfs-utils - 1.2.3 - 26.el6 nfs-utils - 1.2.3 - 15 past

  orac1 nfs-utils - 1.2.3 - 26.el6 nfs-utils - 1.2.3 - 15 past

  Result: Package of checking for 'nfs-utils '.

  Check the availability of the "6200,6100" ports required for the component 'Oracle Notification Service (ONS)'

  Name of the node Port number protocol status available

  ----------------  ------------  ------------  ------------  ----------------

  orac2 6200 TCP successful Yes

  orac1 6200 TCP successful Yes

  orac2 6100 TCP successful Yes

  orac1 6100 TCP successful Yes

  Result: Availability of Port Control passed to ports '6200,6100 '.

  Check for multiple users with the value of the UID 0

  Result: Check for multiple users with the value of the UID 0 past

  Check: The current group ID

  Result: Control of current past group ID

  Check the consistency of the main group of the root user from

  Status of node name

  ------------------------------------  ------------------------

  orac2 spent

  orac1 spent

  Check the consistency of the primary group of the user root past

  Starting synchronization check by using the Network Time Protocol (NTP)...

  Of NTP Configuration file check has started...

  The NTP configuration file "/ etc/ntp.conf" is available on all nodes

  Of NTP Configuration file check passed

  Checking delay of the devil...

  Check: Time for 'ntpd '.

  Node name race?

  ------------------------------------  ------------------------

  orac2                                 yes

  orac1                                 yes

  Result: Check time-out for 'ntpd '.

  Check for NTP daemon or service life spent on all nodes

  Check if NTP daemon or service using the 123 UDP port on all nodes

  Search the NTP daemon or service uses the port UDP 123

  Name of the node Port open?

  ------------------------------------  ------------------------

  orac2                                 yes

  orac1                                 yes

  Common NTP Time Server checks began...

  Time server NTP "193.27.209.1" is common to all nodes on which runs the NTP daemon

  Time server NTP "194.29.130.252" is common to all nodes on which runs the NTP daemon

  Registration of time server common NTP spent

  The clock offset record time server NTP began...

  Audit on the nodes '[orac2, orac1] "...

  Check: The Offset of the time clock to the time server NTP

  Time server: 193.27.209.1

  Time limit offset: 1000,0 ms

  Name of node time shift status

  ------------  ------------------------  ------------------------

  orac2 - 355.25 spent

  orac1 - 124.19 spent

  Time server "193.27.209.1" has time shifts that are within acceptable limits for the nodes "[orac2, orac1].

  Time server: 194.29.130.252

  Time limit offset: 1000,0 ms

  Name of node time shift status

  ------------  ------------------------  ------------------------

  orac2 - 358.87 spent

  orac1 - 109.63 spent

  Time server "194.29.130.252" has time shifts that are within acceptable limits for the nodes "[orac2, orac1].

  The clock offset check past

  Result: Control of synchronization using Network Time Protocol (NTP) spent

  Base file name consistency check model...

  Check the consistency of spent Core file name pattern.

  Check to make sure that the user "grid" is not in the group "root".

  Name of State comment node

  ------------  ------------------------  ------------------------

  There is no such thing as orac2 spent

  There is no such thing as orac1 spent

  Result: User "grid" is not part of the "root" group Check the past

  Audit default user file creation mask

  Name of node available comment required

  ------------  ------------------------  ------------------------  ----------

  0022-0022 orac2 spent

  0022-0022 orac1 spent

  Result: Mask by default user file creation passed Verification

  Checking the integrity of the file "/ /etc/resolv.conf ' overall of nodes

  Check the file "/ /etc/resolv.conf" to ensure that the only area and search for entries is defined

  CAUTION:

  PRVF-5640: both search and domain entries are present in the file ' / /etc/resolv.conf ' on the following nodes: orac1, orac2

  Checking if entry field in the file ' / /etc/resolv.conf ' is constant in knots...

  Check the file "/ /etc/resolv.conf ' to ensure that single domain entry is defined

  There is no more than a 'domain' entry in any ' / /etc/resolv.conf ' file

  All nodes have the same 'domain' entry defined in the file "/ /etc/resolv.conf.

  If control search entry in the file "/ /etc/resolv.conf ' is constant in knots...

  Check the file "/ /etc/resolv.conf ' to ensure that research that one entry is defined

  Several topics 'research' does not exist in any ' / /etc/resolv.conf ' file

  All nodes have the same order of 'search' defined in the file "/ /etc/resolv.conf.

  Checking the time of DNS response for an unreachable node

  Status of node name

  ------------------------------------  ------------------------

  orac1 spent

  orac2 spent

  The time of DNS response for an unreachable node is consistent with the acceptable limit on all nodes

  Check the integrity of the file "/ /etc/resolv.conf ' past

  Check: consistency of zone

  Result: the zone past consistency check

  Verifying the integrity of the name service switch configuration file ' / /etc/nsswitch.conf '...

  Check if "hosts" entry in the file "/ /etc/nsswitch.conf" is consistent in all nodes...

  Check the file "/ /etc/nsswitch.conf" to ensure that the single entry "hosts" is set

  More of an entry "hosts" does not none "/ /etc/nsswitch.conf ' file

  All nodes have even entered 'hosts' defined in the file "/ /etc/nsswitch.conf.

  Check the integrity of the name service switch configuration file ' / /etc/nsswitch.conf ' past

  Control the demon "avahi-daemon" is not configured and running

  Check: Daemon "avahi-daemon' not configured

  Name of the configured node status

  ------------  ------------------------  ------------------------

  orac2 Yes failed

  orac1 Yes failed

  Demon not configured has no process "avahi-daemon."

  Check: Daemon "avahi-daemon" does not

  Node name race?                  Status

  ------------  ------------------------  ------------------------

  orac2 Yes failed

  orac1 Yes failed

  Demon of the control does not have to process "avahi-daemon" works not

  From check for/dev/SHM mounted as a temporary file system...

  Check for/dev/shm mounted as a temporary last file system

  ******************************************************************************************

  Here is a list of pre-requisites fixable chose to fix at this session

  ******************************************************************************************

  --------------                ---------------     ----------------

  Check has failed.                 Failed on nodes of reboot needed?

  --------------                ---------------     ----------------

  Limit: maximum orac2 opened, orac1 not

  file descriptors

  The soft limit: maximum user orac2, orac1 not

  process

  Demon 'avahi-daemon' not orac2, orac1 not

  configured and running

  Run "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" as root user on the nodes 'orac1, orac2' to perform correcting operations manually

  Press the ENTER key to continue after execution of ' / tmp/CVU_12.1.0.1.0_grid/runfixup.sh ' has finished on the nodes 'orac1, orac2 '.

  FIX: Strict limit: file descriptors open maximum

  Status of node name

  ------------------------------------  ------------------------

  orac2 failed

  orac1 failed

  ERROR:

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.

  Result: "strict limit: file descriptors open maximum" could be fixed on nodes 'orac2, orac1 '.

  FIX: Soft limit: maximum user process

  Status of node name

  ------------------------------------  ------------------------

  orac2 failed

  orac1 failed

  ERROR:

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.

  Result: "soft limit: maximum user process" could be fixed on nodes 'orac2, orac1 '.

  FIX: Daemon "avahi-daemon' not configured and running

  Status of node name

  ------------------------------------  ------------------------

  orac2 failed

  orac1 failed

  ERROR:

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.

  GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.

  Result: "Demon"avahi-daemon' not configured and running"could not set on the nodes 'orac2, orac1 '.

  Difficult operations for some prerequisites fixable failed nodes 'orac2, orac1 '.

  Check prior to the installation of cluster service failed on all nodes.

  SOLVED!

  The root cause was in iptables service works.

  Just forgot to arrest him and take off chkconfig!

  Issue can be closed.

• Link from Oracle to MySQL database select only one line

  Hello

  I created a connection to the batabase Oracle 11.2 to a MySQL database via a database link. The following statement shows that 35 lines are in the mySQL table:

  SQL > select count (*) from 'main_pages"@MOREWEB;

  COUNT (*)

  ----------

  35

  But a normal select statement only return 1 row.

  SQL > select 'subject' of 'main_pages"@MOREWEB;

  Object

  ------------------------------------------------

  Übersicht: references

  I use the mysql-connector-odbc driver - 3.51.30 - winx64. One is the newer version be installed because on Windows Server 2008 R2, I get an error with a missing dll file. The DataDirect ODBC driver is not possible, because we like to use the MySQL-database free one only support for DataDirect enterprise edition.

  I have also tried to limit the HS_OPEN_CURSORS or do not limit the HS_FDS_FETCH_ROWS, but there is no difference in the result. I always get only one line.

  HS Init.ora
  # This is an example of initialization file of the agent that contains the HS settings # necessary for the database to ODBC gateway # # HS init parameters # HS_FDS_CONNECT_INFO = moreweb HS_FDS_TRACE_LEVEL = WE HS_FDS_FETCH_ROWS = 1 # # Required for the non-Oracle system environment variables # #set < varenv > = < value >

  HS trace file

  Oracle Corporation - MITTWOCH 5 November 2014 13:56:22.066 Heterogeneous Agent release 11.2.0.1.0 Oracle Corporation - MITTWOCH 5 November 2014 13:56:22.066 Version 11.2.0.1.0 HOSGIP to 'HS_FDS_TRACE_LEVEL' returned 'ON '. HOSGIP to 'HS_OPEN_CURSORS' returned '50 '. HOSGIP to 'HS_FDS_FETCH_ROWS' returned '1 '. HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536". HOSGIP to 'HS_NLS_NUMERIC_CHARACTER' returned '. " HOSGIP to 'HS_KEEP_REMOTE_COLUMN_SIZE' returned 'OFF '. HOSGIP for "HS_FDS_DELAYED_OPEN" returns 'TRUE '. HOSGIP to 'HS_FDS_WORKAROUNDS' returned '0 '. HOSGIP to 'HS_FDS_MBCS_TO_GRAPHIC' returned 'FALSE '. HOSGIP to 'HS_FDS_GRAPHIC_TO_MBCS' returned 'FALSE '. HOSGIP to 'HS_FDS_RECOVERY_ACCOUNT' returned 'RECOVER '. HOSGIP for "HS_FDS_TRANSACTION_LOG" returns "HS_TRANSACTION_LOG". HOSGIP to 'HS_FDS_TIMESTAMP_MAPPING' returned 'DATE '. HOSGIP to 'HS_FDS_DATE_MAPPING' returned 'DATE '. HOSGIP to 'HS_FDS_CHARACTER_SEMANTICS' returned 'FALSE '. HOSGIP for "HS_FDS_MAP_NCHAR" returns 'TRUE '. HOSGIP to 'HS_FDS_RESULTSET_SUPPORT' returned 'FALSE '. HOSGIP to 'HS_FDS_RSET_RETURN_ROWCOUNT' returned 'FALSE '. HOSGIP to 'HS_FDS_PROC_IS_FUNC' returned 'FALSE '.

  HOSGIP to 'HS_FDS_REPORT_REAL_AS_DOUBLE' returned 'FALSE '.

  using mpgw as the default value to "HS_FDS_DEFAULT_OWNER".

  HOSGIP to 'HS_SQL_HANDLE_STMT_REUSE' returned 'FALSE '.

  SQL text of hgopars, id = 1, len = 36...

  45 00: 53454 C 43542043 4F554E54 282 HAS 2920 [COUNT (*) SELECT]

  10: 46524F4D 20606D 61 696E5F70 61676573 [FROM ' main_pages]

  20: 60204131 [' A1]

  Delayed open until the first fetch.

  Deferred execution open.

  SQL text of hgopars, id = 1, len = 40...

  45 00: 53454 C 43542041 312E6073 75626 has 65 [SELECT A1.' subje(1)]

  10: 63746020 46524F4D 20606D 61 696E5F70 [ct' FROM ' main_p]

  20: 61676573 60204131 [ages A1]

  Delayed open until the first fetch.

  Deferred execution open.

  Please can someone help me.

  Thank you.

  Bianca

  Bianca,

  Everything I've read on this point to a need to install/reinstall the Microsoft Visual C++ Redistributable Package for windows OS 2008.

  You will need to download the appropriate version for your microsoft form system.  There is a lot of information on this topic.  Just

  search on the web, and it should help you in the right direction.

  Thank you!
  Matt

• Link to MySql Error [Microsoft] [ODBC Driver Manager] Oracle database

  Hi all:

  I need your help, I want to access mysql oracle 11g R2 database. When I try to connect oracle database mysql database, I get the error below, kindly help your help will be appreciated, thanks in advance

  
  

  When I run:

  
  

  Select * from test1@mysqltest;

  [ERROR]
  

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] Data source name not found and no driver by default specified {IM002}

  ORA-02063: preceding 2 lines of THAONT1. MYSQL

  28500 00000 - "connection between ORACLE and a non-Oracle system has sent this message:

  * Cause: The cause is explained in the forwarded message.

  * Action: See the documentation for the non-Oracle of the message system.

  My config

  Enterprise Edition of Oracle db:11.2.0.3

  OS: Win 7 64 bit

  bit ODBC: 64 for the MySQL Connector

  MySQL db:5.1.19

  ODBC configuration

  

  LISTENING PORT. ORA:

  =============
  

  listener.ora # Network Configuration file: D:\app\THAONTSE90151\product\11.2.0\dbhome_3\NETWORK\ADMIN\listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = D:\app\THAONTSE90151\product\11.2.0\dbhome_3)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:D:\app\THAONTSE90151\product\11.2.0\dbhome_3\bin\oraclr11.dll")

  )

  (SID_DESC =

  (SID_NAME = tst)

  (ORACLE_HOME = D:\app\THAONTSE90151\product\11.2.0\dbhome_3)

  (PROGRAM = dg4odbc)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.12.1.58)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = D:\app\THAONTSE90151

  TNSNAMES. ORA:

  ================

  TSTLINK =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.12.1.58)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SID = tst)

  )

  (HS = OK)

  )

  inittst.ora($ORACLE_HOME/HS/admin)

  ========================
  

  # This is an example of initialization file of the agent that contains the HS settings

  # necessary for the database to ODBC gateway

  # HS init parameters

  #

  HS_FDS_CONNECT_INFO = testmysql

  HS_FDS_TRACE_LEVEL = off

  # Required for the non-Oracle system environment variables

  ODBCINI value #= D:\ODBC. INI

  
  

  the dblink is created between oracle and mysql:

  ==========================
  

  SQL > create database public link mysqltest

  connect to thaont identified by abc123 using 'TSTLINK ';

  SQL > select * from test1@mysqltest;

  [ERROR]
  

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] Data source name not found and no driver by default specified {IM002}

  ORA-02063: preceding 2 lines of THAONT1. MYSQL

  28500 00000 - "connection between ORACLE and a non-Oracle system has sent this message:

  * Cause: The cause is explained in the forwarded message.

  * Action: See the documentation for the non-Oracle of the message system.

  kindly help.

  Thank you and best regards.

  The error message '[Microsoft] [ODBC Driver Manager] data source name not found and no pilot by specified default {IM002}' explainind auto - DG4ODBC is not able to find the ODBC DSN you created.

  In your file init of gateway, you have set up the DSN: HS_FDS_CONNECT_INFO = testmysql

  And according to the administrator of ODBC in Windows screenshot, you have created a DSN called testmysql - unfortunately you created as a USER DSN. But DG4ODBC needs a SYSTEM DSN. The reasin why he needs a system DSN is that, by default the Oracle listener is running in the local system account. Therefore, when create you a USER DSN ODBC it can be access by the user who created it, but no one else can use it - and also not the local system account which serves as the Oracle listener. If you need to create a system DSN that each user on this computer can use the DSN (including the local system account).

  -Klaus

• Services Oracle heterogeneous unixODBC DG4ODBC

  Morning

  I have a challenge please help if you have lived and it is solved. I am trying to connect to SQL server from Oracle to help

  1 UnixODBC

  2 Microsoft ODBC Driver for SQL Server 11.0.2270.0 11

  3.DBversion:11.2.0.3.0

  4.LSN:11.2.0.3.0

  5.[Oracle@XXXXX]:/Oracle > odbcinst - q d

  [11 for SQL Server ODBC driver]

  6.[Oracle@xxx]:/Oracle > odbcinst - q s

  [SQLEXPRESS]

  7.[Oracle@XXXX]:/Oracle > odbcinst-j

  unixODBC 2.3.0

  DRIVERS...: /etc/odbcinst.ini

  SYSTEM DATA SOURCES: /etc/odbc.ini

  FILE DATA SOURCES... : / etc/ODBCDataSources

  USER DATA SOURCES.. : /etc/odbc.ini

  SQLULEN size...: 8

  SQLLEN size...: 8

  Size SQLSETPOSIROW. : 8

  8.[Oracle@XXXX]:/Oracle > cat /etc/odbcinst.ini

  [11 for SQL Server ODBC driver]

  Description = 11 of the Microsoft SQL Server ODBC driver

  Driver=/opt/Microsoft/msodbcsql/lib64/libmsodbcsql-11.0.so.2270.0

  = 1 thread

  UsageCount = 1

  9.[Oracle@XXXX]:/Oracle > cat /etc/odbc.ini

  [SQLEXPRESS]

  Driver=/opt/Microsoft/msodbcsql/lib64/libmsodbcsql-11.0.so.2270.0

  Server = 10.201.239.39, 1433

  Database = ARsystem

  User = nmcmonitor

  Password=M@puto4321

  = 1 thread

  UsageCount = 1

  10.[Oracle@XXXXX]:/etc/ODBCDataSources > isql - v SQLEXPRESS xxxxx xxxxxxxx

  +---------------------------------------+

  | Connected!                            |

  |                                       |

  | SQL query |

  | help [tablename] |

  | quit                                  |

  |                                       |

  +---------------------------------------+

  11.[Oracle@XXXXX]:/Oracle/app/product/11.2.0.3/HS/Admin > ls

  extproc.ora initdg4odbc.ora inithsmssql.ora.sample listener.ora.sample tnsnames.ora.sample

  12.[Oracle@xxxxxx]:/Oracle/app/product/11.2.0.3/HS/Admin > cat initdg4odbc.ora

  # This is an example of initialization file of the agent that contains the HS settings

  # necessary for the database to ODBC gateway

  #

  # HS init parameters

  #

  HS_FDS_CONNECT_INFO = SQLEXPRESS

  # < odbc data_source_name >

  HS_FDS_TRACE_LEVEL = off

  # < trace_level >

  HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so

  # < name of the full path to the driver or the odbc driver manager >

  HS_FDS_FETCH_ROWS = 1

  HS_DB_NAME = ARsystem

  HS_FDS_SUPPORT_STATISTICS = FALSE

  #

  # ODBC specific environment variables

  #

  Set ODBCINI=/etc/odbc.ini

  # < name of the full path to the odbc initialization file of the >

  #

  # Required for the non-Oracle system environment variables

  #

  #set < varenv > = < value >

  ===================================================================================================

  [oracle@xxxx]:/oracle/app/product/11.2.0.3/network/admin > ls]

  Listener.ora samples shrept.lst tnsnames.ora

  [oracle@xxxxx]:/oracle/app/product/11.2.0.3/network/admin > cat listener.ora]

  listener.ora # Network Configuration file: /oracle/app/product/11.2.0.3/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = optimadb) (PORT = 1521)))

  )

  ADR_BASE_LISTENER = / oracle/app

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = DG4ODBC)

  (ORACLE_HOME = oracle/app/product/11.2.0/dbhome_1)

  (PROGRAM = / oracle/app/product/11.2.0/dbhome_1/bin/dg4odbc)

  (ENVS=LD_LIBRARY_PATH=/usr/lib64:/usr/local/lib:/oracle/app/product/11.2.0/dbhome_1/lib/)

  )

  )

  [oracle@xxxxxx]:/oracle/app/product/11.2.0.3/network/admin > lsnrctl status]

  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 6 October 2014 10:45:41

  Copyright (c) 1991, 2011, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=optimadb) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production

  Start date October 5, 2014 13:18:35

  Uptime 0 days 21 h 27 min 5 s

  Draw level off

  Security ON: OS Local Authentication

  SNMP ON

  Parameter Listener of the /oracle/app/product/11.2.0.3/network/admin/listener.ora file

  The listener log file /Oracle/app/diag/tnslsnr/optimadb/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=optimadb) (PORT = 1521)))

  Summary of services...

  Service "DG4ODBC" has 1 instance (s).

  "DG4ODBC" instance, status UNKNOWN, has 1 operation for this service...

  Service 'OPTPROD' has 1 instance (s).

  'OPTPROD' instance, State LOAN, has 1 operation for this service...

  The command completed successfully

  [oracle@xxxxx]:/oracle/app/product/11.2.0.3/network/admin > tnsping DG4ODBC]

  AMT Ping utility for Linux: Version 11.2.0.3.0 - Production on 6 October 2014 10:46:22

  Copyright (c) 1997, 2011, Oracle.  All rights reserved.

  Use settings files:

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.201.239.39) (PORT = 1433)) (CONNECT_DATA = (SID = DG4ODBC)) (HS = OK))

  AMT-12537: TNS:connection closed

  How can I solved this problem TNS-12537: TNS:connection closed

  Thank you

  Hello

  It looks like on line 7 is -.

  HS_DB_NAME = ARsystem

  What happens if you comment on this point?

  If you still have problems then just include these lines and all the rest - comment

  HS_FDS_CONNECT_INFO = SQLEXPRESS

  HS_FDS_TRACE_LEVEL = off

  HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so

  Set ODBCINI=/etc/odbc.ini

  and try again a new SQLPLUS session.

  Kind regards

  Mike