Requirement of band VDI Desktop network bandwidth

Similar Questions

• IEAK error when connect to VDI Desktop in vWorkspace 8

  Hello

  as a previous mistake of kerberos ticket post I do several tests in order to implement vWorkspace 8.

  When I connect to VDI desktop (without kerberos, or with the initial only, not SSO) pops up an error IEAK. Sorry for the attached screenshoot and some descriptions are in Spanish

  The guest operating system is company Win 7 SP1 with the latest patches, active RDP8 and Explorer 9. Guest operating system is Spanish localized.

  

  Detailed description:

  Firma con problemas:

  Number del problema evento: BEX

  Application number: rundll32.exe_iedkcs32.dll

  Application version: 6.1.7600.16385

  Marca of tiempo of the application: 4a5bc637

  Number del modulo con errores: PNMicSrv.dll_unloaded

  Version del modulo con errores: 0.0.0.0

  Tiempo del modulo Marca con errores: 513eb9a9

  Exception offset: 7502d6a1

  Exception code: c0000005

  Exception data: 00000008

  Led operating system version: 6.1.7601.2.1.0.256.4

  ID of regional config: 3082

  Additional information 1: 0a9e

  Additional information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  LEA nuestra declaracion privacy online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0C0A

  I have the same problem. I opened a folder with support and they are studying.

  Meanwhile, I have found a workaround. It seems that the problem is related to pnmicsrv.dll for vworkspace versions superior to 7,6 GA at least the question seemed to us after application of a patch for this version and it reappeared after upgrade to v8. In both cases I solved it replaces the pnmicsrv.dll file in our model with the dll version 7.6 of GA

• VMware Vsphere HA (problem of storage in common) and problem of band network bandwidth

  Hi all

  I am setting up VMware VSphere HA on ESXI 6.0

  I have 5 hosts running, each host has 2 management networks main network 1 vMotion and 1 network card for balancing with the management network. (each NIC 1Gbit uplink)

  I also attached to each card a FC (Fiber Channel) connected to HP 3PAR storage.

  each host have 1 TB or 2 TB Fiber Channel-attached storage.

  When I was setting up the AP he stated that he did not have any shared how storage can I allow other hosts to see each store data as a shared storage. NB: when I go vsphere client to web I see all the storage of each host.

  I also want to allow FT on a virtual machine, I have also a problem of bandwidth insuffisent or something. .

  also, I enabled fault tolerance on each NIC attached to the host.

  also another question: should I export volumes (LUNS) to all hosts in the AP? (in fact I exported each volume to each host separately) for example:

  Volume 1: HP3PAR_ESX1 exported to HOST ESX1

  Volume 2: HP3PAR_ESX2 exported to the ESX2 HOST

  Volume 3: HP3PAR_ESX3 exported to ESX3 HOST

  .. .etc

  can you me clear on this issue or guide me to where I can solve these problems please.

  When I try to activate the FT on the VM I the following warning attached

  This message was edited by: coolirc attached image FT problem

  There are memory FT requirements compatible VM is through two virtual, primary and secondary computers. so it will consume the same amount of resources of both ESXi hosts.

  VM with 10 GB of RAM allocation, turn on FT booking VM is now 10 GB RAM, so 10 GB + VMkernel consumption General host running primary VM and same amount of the host that is running with secondary VM. on top of this admission control in support of the failures of host we are going to tolerate so say primary VM host fails, then secondary VM becomes the new primary and triggers a new high school to be created and powered in one of the other host survivor in your HA cluster but which will be successful only when you have sufficient resources available to satisfy a reservation.

  your source host has 16 GB of RAM and one of the destination host also got 16 GB of RAM, so if you try to activate pi after disabling admission control on your cluster policy, I think that it should allow you to activate FT without errors. [if it still does not work so if possible, turn off all other virtual machines for free resources or to try to reduce their reservation manually if they are running with a reservation and try again.]

  with admission control, the necessary resources would be even higher.

  screenshot of Cluster summary reports that you have 4 guests in it and the memory resources available about 30 GB to 60 GB total memory. But isn't always the right figure, if you go to the monitor-> book resources, is where you will find actual "ready reserve", it's the right amount of reserve memory that you will be able to use across several virtual machines, you run in your cluster.

  I tried 2 vCPU vm FT in vSphere 6, works very well, but never tried with Hardware version 8, in your case, your virtual machine is hardware version 8, although I'm not sure if it is mandatory to have the hardware version 11 VM for FT so ideally it should work, but virtual hardware version if possible vm upgraded to 11.

• Confirm band needs network bandwidth

  Hello, I just want to confirm things im of understanding on what im reading under Performance/Networking

  We are counting on the creation of a disaster recovery Site, currently 5.5 Vsphere with 5 guests.  One of the things im trying to figure out is networking.  Our current environment runs on Cisco UCS so that the hosts are NIC there running to 20gbps.  This seems definitely exaggerated to the site of DR.  So the plan is to have just a few hosts in the recovery site and im trying to figure out what NIC or what speed I should use.  1 GB or 10 GB Ethernet.

  If I look at each host Vsphere and goto Performance and networking, I can see the use of network cards.  Using the highest for a week is 25Mmps and it is a short spur, the average for each host is between 600 Kbps and 1.1Mbps.

  So if I put 1 Gig Ethernet NIC in the host and nic by looking at this thinking im team I would be fine.  10 gig Ethernet seems certainly exaggerated and more expensive.

  IM I have analyzed this right or am, I missed something?

  Thank you

  Yes 1 GB should be fine and remember to design for redundancy-

• Performance of VDI desktop

  We strive to implement virtual desktops, but I'm having a problem trying to sell it to senior management because of performance issues.  We have about 8 virtual machine running in our infrastructure as well as all the servers and it seems that the VDI mahcines have problems with video and overall performance.  access time seems to be slow, screen redraw is choppy, etc..  Any idea on what could be the cause or how to fix?  I have two hosts and the resources, both look good.  Memory does not exceed 50% and the processor is less than 30%.  I have them in a resource pool that gets the highest priority and still no good.  They're just XP Pro POS systems with 2 GB of ram.  Any help is appreciated.  Thank you.

  Perry

  How to watch bandwidth?    Have you seen the XP deployment guide to see if there is something that can help you, http://www.vmware.com/files/pdf/XP_guide_vdi.pdf.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Lying VDI Desktop on Mac remote access

  original title: Remote Desktop VDI on Mac

  I just installed on my Mac OSX Lion of mountain and can no longer access the Remote Desktop VDI. Apple customer service told me to check with Microsoft, if they have an update for OSX Mountain Lion.

  Hi Renon,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Disable the requirement of password for the network disks

  I have a LAN with Windows XP Pro and Vista computers. With some effort, all computers can see, edit and manage files on other computers. There is also network disks (that is, directly connected to the network; no computer) used for backup and storage.

  None of the computers or readers in network has a login password or user name. I intend to keep it that way. (Think of the bucolic neighborhood where no one locks doors and there is no flights.)

  Since the Vista (Ultimate) computer, when I try to back up to a network drive, Vista insists on a user name and password. But there is not. So, I can't back up to a network drive (although in Windows Explorer and the command prompt, I can write and manage networked computers and disks without problem). I was not able to find a way around this obstacle.

  I put the Vista computer is not to require a password (network and sharing Center > sharing and discovery > sharing protected by password = Off). But that seems to focus on the incoming requests (from other computers to access the Vista computer) but no outgoing requests (Vista to get access to other computers and readers). Affecting the security of the files and folders on other computers and network disks to everyone = control total (in other words, anyone who can physically access the disc should be able to write to it) did not solve the problem.

  I assume that there is a simple solution. I would be grateful for help. (Remember that the parameter/allocation of passwords is not a solution).

  I don "t know precisely how to do what you ask for - there is no commands or settings I am sensitive to this address. It can probably be done with a registry fix, but I looked and could not find one.

  I found the following solution suggested in another forum and it was the only one who seemed to avoid the need for name of user and password (or failed to mention this requirement and exists).  It may not be the same as your situation is a Win Server and so maybe a field rather than a working group, but it seems worth a try.  To be honest, I don't know yet if the command applies to your situation and can not test it with my system - but who will know soon enough. If it allows you to, maybe the location of the network password will give you tips on how to make various adjustments that will work in your situation.  I would be cautious about deleting all references without making a note of them so they can be restored if she doesn't and perhaps is still problematic.  I would also create a system restore point right before starting this process to be on the safe side.

  With the a2x compliments of http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/ :

  For what it's worth, I had this works when you connect a Vista client to Win Server 2003 R2 SIN.  I had the same questions as everyone else here, but ultimately what worked for me was of typecontrol userpasswords2 in the command run on the Vista client and go into the Advanced tab, then on manage passwords.  I found references to the NAS (DNS names, ip addresses) and removed all.  Then I disonnected all drives mapped to the SIN of working.  Then I traced the drive that I was going to use for backup by using the network card function first and that worked (I used the mapping of IP).  Then I went into the backup and restore and it said it was on a network drive and typed in the path (once again using an IP instead of a server name) and he was able to see the drive and I would like to choose what to backup, etc. and it worked.

  I hope this works.  If this isn't the case, after return and I'll investigate more trying to find a solution (if any).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Laptop (windows 7) doesn't recognize computer (XP) desktop network, but connects to the wireless router

  I have two computers (desktop and laptop), a plug-and-play printer connected to the desktop computer and a wireless router.  My laptop was connected to the printer via a family group on the network connection.  I've recently upgraded the OS on my laptop from Vista to Windows 7 and now my phone does not even recognize the MSHOME network which was initially established.  I am able to connect to internet via wireless router (Verizon MIA 424 - WR... or something like that) but I can not connect to desktop files, devices on it and above all terribly printer.  What's weird, this is my office always recognizes my laptop and can even connect to my laptop from my desktop.  The network is established by the office which is running XP.  Not sure if this helps, but I remember when I set the laptop computer connection / original printer, I had to do a port mapping step funky.  Any help would be greatly appreciated!  FYI, I did everything suggested by microsoft windows help.

  NET

  Hello

  To access the XP of Windows 7 computer, you can:

  a. type the name of the XP computer in the Start > box Search in this format:

  \\computer

  b. press the Windows key + R and type the name of the XP computer in the same format.

  c. click Start > network , then click on the XP computer.

  For more information on the networking of computers running different versions of Windows, see this article:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• VixVM_LoginInGuest() requires the host to host networking?

  Functions as do VIX VixVM_LoginInGuest() below require networking from the host to the comments?

  http://www.VMware.com/support/developer/VIX-API/vix18_reference/lang/c/functions/VixVM_LoginInGuest.html

  Here you can only light networking so there is no networking between the host and the guest. Is this a problem for the VIX functions as above?

  I don't think it should be a problem given that communication is usually done through the backdoor available from VMware Tools installed in the comments.  VMware Tools must be running before calling this function, so you will need to use VixVM_WaitForToolsInGuest() to wait for VMware Tools to run first.

• Pavillion P6837C Desktop: Network slow replacement of card (10/100) in P6837C, internet

  I have comcast internet service which is supposed to be 150 MB declining. The max I can get is 95 mb down. I had comcast to watch my equipment and they say that everything is fine.
  
  I just realized that my network card is 10/100 and my 'connected to 100mpbs said lan connection. " Is this the reason why I can't get more than 95 MB?
  
  Then, what the card will solve this problem?

  Hello

  1. My best bet is: that slot is a wireless card but I don't know that that would work.
  2. My link is an example. Please check the back of your machine to see whether or not it uses the low profile. In my view, it uses ordinary height. You can ask a similar one with a regular height (to match the screw hole).
  3. Yes. You should check the dricer. Many suppliers now provide a CD, go to the provider's site to download the driver.

  Kind regards.

• black bands - the problem of bandwidth - Vision Builder HAVE

  Hello

  I have a problem with an app where I anime shows Vision Builder 4 on 1 computer. Everything seems to go well until after some time (sometimes minutes, sometimes half an hour) I get horizontal black stripes on my images.

  I searched this forum and found many posts on this problem. However, I tried the various solutions that have been proposed and this does not seem to make a difference.

  Information:

  * 4 camera (Allied Manta G201C)

  * camera is triggered (rising edge) separately, but almost simultaneously.

  * PC: quadcore, 64-bit, Windows 7 64 bit system

  * Run-time Vision Builder 2012 license.

  * Programmed with Vision Builder HAVE 2012.

  * Switch: 1000 MB

  * Interface programmed in c# (receives images of the relevant info 4 programs and displays on the screen).

  Proven methods:

  * Sets the size of the packets to 1500 (even tried low size of package without improvement).

  * Set desired maximum bandwidth to 250 no improvement (was initially set at 1000 - we put it to 250 because there are 4 camera - even the 150 configuration does not seem to improve the situation.)

  * cursed a lot - but which did not help either.

  * Can use us a switch that does not fit our goal?

  * Our switch is placed with several engines around it (the closest on a meter away) and just behind a cabin of electricity in which there are several transformers. That reach our data?

  * Other suggestions?

  * Please let me know if you need additional information about this problem.

  We expect our customers to visit us the week next to see if we will be able to start production and we are currently under enormous time pressure (and stress). So, any help would be greatly appreciated.

  With sincere friendships.
  Tom

  
  

• What version of windows is required to upgrade a desktop with Windows ME computer to use wireless internet?

  We have a 2000 Hp desktop computer? with windows ME and just recently had wireless internet access. The system is too obsolete to connect even with our router. Now, what version of Windows is necessary for us to spend to be able to connect?

  Unfortunately, a Windows ME operating system cannot be upgraded.  Its time to recycle that old computer and buy a new one with Windows 7 preinstalled.  Here are a few examples.

• Driver required for HP-15af024AU wireless network card

  I use the laptop above using Windows 7-32 bit.

  I need driver network card wireless with the hardware ID

  PCI\VEN_10EC & DEV_B723 & SUBSYS_804C103C.

  Experts, please give me the link to what precedes.

  Thank you.

  Hello

  Should be Realtek wlan driver on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72932.exe

  Kind regards

  DP - K

• Double configuration band EA6500 with network gateway

  I recently bought the EA6500 to replace an old router. I went through the Setup process and were able to connect all the currencies I wanted to-PC, printers, televisions, games, phones and tablets. They have all see and connect to the INternet through the router. My problem - they do not see each other. When I pull the network on my PC it sees only the router and the Internet. When I look at the list of devices on the Smart Wi - Fi, all devices are there. My ISP is Cox Cable, my laptops are a Lenovo on Windows 7 and an ASUS on Windows 10.

  Should what settings I change my PC sees the printer?

  Thanks for your help.

  By chance the guest network is enabled? If yes maybe printers connected to it. Disable the network of comments and see if printers turn off linr. Or look at the printers and see if they are on the same subnet. All on the same network should be with an ip of 192.168.1.x address only the last set of numbers must be different.

• Shortcuts occationaly desktop network locations stop working and after a few minutes start working again

  7 x 64 access a file from the Windows Server 2008 Server.

  We have records of project on the file server that access many people without any problem.  A user has shortcuts to these network folders saved on his desk.  Once a week or two, the user will receive the broken shortcut error message:

  "The item 'dossierprojet' that this shortcut refers to has been changed or moved, so this shortcut works correctly."

  Immediately, it can navigate to the folder by using a connected player or the UNC path with no problems.  After a few minutes the shortcut will start working again.  I created the shortcut by using a mapped drive and using the UNC path, but it continues to continue to occur.

  Hello

  Thanks for posting your question on the Forum of the Microsoft community.

  The question will be better adapted to the public of professionals on the forums TechNet as a computer is in a domain network.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you