Requirement of sytem for curve tracer

Similar Questions

• Equium A200 - windows requires a driver for Microsoft ISATAP Adapter

  Hello

  I am a complete newbie at this forum and came looking for help. I recently bought an Equium A200 laptop computer with Vista preinstalled.

  Lately when I start the computer and log in to Windows, I get a message that windows requires a driver for an unknown device and ask for permission to connect to the internet to find the driver concerned. When I click on this option, I get a message saying that the computer has found the driver but has encountered an error trying to install "Microsoft ISA TAP adapter".

  What is it and why should we need for installation? I thought it was quite strange. Any ideas people?

  Any help will be much appreciated.
  J.Sutton

  Hello

  I searched a bit in the Microsoft Knowledge base and discovered that this symptom appears on computers running Windows Vista.

  http://support.Microsoft.com/kb/932520

  Microsoft recommends that ignore this error message. This error message does not indicate a problem with the adapter, computer or any other device. The adapter will continue to function correctly.

  Here are more details;
  + Microsoft ISATAP what inter Site Automatic Tunneling Address Protocol device is used to help the transition to an IPv6 infrastructure companies. Map ISATAP encapsulates IPv6 packets with an IPv4 header. This feature allows the customer to carry IPv6 traffic over an IPv4 infrastructure. This approach allows organizations to migrate slowly to an IPv6 infrastructure without having to spend too much time and financial resources to convert the new infrastructure. +

  Concerning

• Password blackBerry Smartphones does not satisfy the requirements of duration for this problem domain in the creation of BlackBerry ID

  I am developer form India. Im trying to create my BlackBerry ID of the past 5 days. Each time that its giving me same error

  Password does not meet the requirements of length for this field. I'm really frustrated.can anyone solve this problem?

  Thank you

  Ok. Let's start with: how many characters you use the password?

  I don't remember the minimum number of characters in the password, it might be six, but why not try using a password with 6, I know full well that work of 8 characters.

• The latest os for curve 8520 blackBerry Smartphones

  Hi can anyone tell me what the latest operating system is for curve 8520 I current have os 5.0.0.1036 I don't know if it's the last or I have to upgrade to a new version please help

  Hello!

  Unfortunately, the current version and the last for the BlackBerry Curve 8520 is OS 5.0.0.1036 bundle, which is currently installed on your device.

  Because the other 7 and OS6 is to rest the device series to date new Smartphone launched by BlackBerry.

  So for the USGA improved version, either you change your device or, wait if a new update is launched on the market.

  I hope that solves your problem!

  If your problem has been resolved then would you be asked to click 'Like' and accept as a 'Solution' that other advisors invest it times on this Message more.

  Thank you.

• Requirement of CA for EAP - TLS

  Hi all

  I know there is a requirement of Cisco for "User certificates" and "AAA certificates" used in EAP - TLS. Anyone know what are the requirements for the cetificates CA in EAP - TLS please?

  Thank you.

  Hello

  You must have 2 certificates on the client and your radius server.

  First certificate is the "root" Cert which is the same on both devices.

  The second certificate is the 'user' Cert that is unique for each client-server and aaa.

  Below are more details for EAP - TLS:

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_white_paper0918...

  Kind regards.

• ERRORS AFTER UNINSTALLING ALL of the cs5.5:Exit Code: 7 - Summary - 1 fatal Error (s), 3 (s), 6 warnings WARNING: DW065: display the requirements not met for {60E59A6C-7399 - 495 A - B8}

  Exit code: 7

  -------------------------------------- Summary --------------------------------------

  -1 fatal Error (s), 3 (s), 6 warnings

  WARNING: DW065: display the requirements not met for {60E59A6C-7399-495A-B85C-C829F4E59602}

  WARNING: DW065: display the requirements not met for {23767F5D-A80C-4264-B8EA-ED4085FC332A}

  WARNING: DW065: display the requirements not met for {DDBDE7B0-6FC4-40B1-B673-66EEE8CB60CF}

  WARNING: DW031: payload: Adobe XMP panels CS5 3.0.0.0 {2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} has been updated and has been selected for repair. The {42774483-D33C-46F7-8B20-FD0B1A3DAC25} patch Adobe XMP panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 are uninstalled now.

  WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The {A189C479-C7CD-4E08-8CCF-D999B68C0C71} patch camera profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 are uninstalled now.

  WARNING: DW031: payload: Photoshop Camera Raw 6.0.0.0 {37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} has been updated and has been selected for repair. The {FD58D99B-9927-4226-8E00-959A4F76BD89} patch Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 are uninstalled now.

  ERROR: DW020: found payload conflicts and mistakes:

  ERROR: DW020:-Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX must be installed.

  ERROR: DW020:-Adobe Flash CS5.5 depends on Adobe Flash Player 10 Plugin must be installed.

  FATAL: DW020: conflicts were found in the selected payloads. Stop the installation.

  -------------------------------------------------------------------------------------

  What to do now?

  end of message.

  Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

• VMRC requires the license for use or free

  is that the VMware Remote Console tool requires the license for use or free? Thank you very much...

  In my view, it is covered by the vCenter license. As long as you have licensed vCenter (as far as I know on any edition), then you can use VMRC to any number of users.

• BlackBerry Smartphones Mac OS required for Curve 8530

  Does anyone know what Mac operating system is required to link Curve 8530 an i - Mac using OS 10.4.11?

  Thanks a lot for any intervention on this issue...

  Bob.

  Check the system requirements for BlackBerry Desktop Manager for Mac - below

  • Mac OS X 10.5.5 or higher (only 32-bit mode is supported on Mac OS X 10.6)
  • BlackBerry® Device Software v4.2 or higher
  • Tunes v7.7.1 or later version

• Position of legend for curves.

  Hello

  Please look at the picture below.

  I need to have the curve legend similar to it.

  

  Tiara provides a vertical, horizontal and automatic position.

  I am facing problem with position of the channel names.

  How to do this. ?

  I hope am clear about my requirement.

  Kind regards

  Leila

  Hi Julie,.

  Please take a look at the example: "tables 2D as legend and the legend for the axis system Labeling. There is an individual legend (based on a 2D array). To create such a legend, you need the command "CurveSnippet".

  Greetings

  Walter

• App Podcast of blackBerry for Curve Smartphones

  I got my curve for a month now and still does not know how to access the podcasts!

  Found this link to download the podcast app: http://ca.blackberry.com/apps/blackberry-apps/podcast.html#tab-1

  The page lists the system requirements (I have them all):

  Me again:

  I think I found the answer to my problem on this thread here in the forums:

  http://supportforums.BlackBerry.com/T5/device-software-for-BlackBerry/BlackBerry-podcasts-on-OS-7-1/...

  The good news is it seems to be a solution to this problem.  The bad news is that the problem has existed for several months and BB support doesn't seem to have a solution for this.

  Hope of workaround helps someone in the future.

• required video driver for the windows vista Director

  Re: video drivers that are required for the Director of windows vista please can someone tell me where I can download the file (s) to do so.

  Ian

  Hello

  That's where you get your video graphics drivers

  go to your computer or graphics card manufacturer site and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

• Disable the requirement of password for the network disks

  I have a LAN with Windows XP Pro and Vista computers. With some effort, all computers can see, edit and manage files on other computers. There is also network disks (that is, directly connected to the network; no computer) used for backup and storage.

  None of the computers or readers in network has a login password or user name. I intend to keep it that way. (Think of the bucolic neighborhood where no one locks doors and there is no flights.)

  Since the Vista (Ultimate) computer, when I try to back up to a network drive, Vista insists on a user name and password. But there is not. So, I can't back up to a network drive (although in Windows Explorer and the command prompt, I can write and manage networked computers and disks without problem). I was not able to find a way around this obstacle.

  I put the Vista computer is not to require a password (network and sharing Center > sharing and discovery > sharing protected by password = Off). But that seems to focus on the incoming requests (from other computers to access the Vista computer) but no outgoing requests (Vista to get access to other computers and readers). Affecting the security of the files and folders on other computers and network disks to everyone = control total (in other words, anyone who can physically access the disc should be able to write to it) did not solve the problem.

  I assume that there is a simple solution. I would be grateful for help. (Remember that the parameter/allocation of passwords is not a solution).

  I don "t know precisely how to do what you ask for - there is no commands or settings I am sensitive to this address. It can probably be done with a registry fix, but I looked and could not find one.

  I found the following solution suggested in another forum and it was the only one who seemed to avoid the need for name of user and password (or failed to mention this requirement and exists).  It may not be the same as your situation is a Win Server and so maybe a field rather than a working group, but it seems worth a try.  To be honest, I don't know yet if the command applies to your situation and can not test it with my system - but who will know soon enough. If it allows you to, maybe the location of the network password will give you tips on how to make various adjustments that will work in your situation.  I would be cautious about deleting all references without making a note of them so they can be restored if she doesn't and perhaps is still problematic.  I would also create a system restore point right before starting this process to be on the safe side.

  With the a2x compliments of http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/ :

  For what it's worth, I had this works when you connect a Vista client to Win Server 2003 R2 SIN.  I had the same questions as everyone else here, but ultimately what worked for me was of typecontrol userpasswords2 in the command run on the Vista client and go into the Advanced tab, then on manage passwords.  I found references to the NAS (DNS names, ip addresses) and removed all.  Then I disonnected all drives mapped to the SIN of working.  Then I traced the drive that I was going to use for backup by using the network card function first and that worked (I used the mapping of IP).  Then I went into the backup and restore and it said it was on a network drive and typed in the path (once again using an IP instead of a server name) and he was able to see the drive and I would like to choose what to backup, etc. and it worked.

  I hope this works.  If this isn't the case, after return and I'll investigate more trying to find a solution (if any).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Reference Dell m2 / NVME specifications and requirements to upgrade for Optiplex, Latitude, XPS and Precision Mobile

  Good daycommunityof Dell.

  Because of your issues, I am pleased to present the information, specifications and requirements for m2 on various models of Dell below.

  Precision 7710:

  Internal dives supported: 3

  Lead taken configurations supported (max): 3 x m2 or m2 2 x and 1 x 2.5 in SATA.

  7710 PCIE lanes:

  2 m2 slots available are wired in 4 X

  The Bay of 2.5 inch is wired as 2 X

  Parts needed to install an m2 in the Bay of 2.5 inches of 7710 7510:

  1 x 745TM 2.5 inches metal support - most of the units will have this already included

  1 x Y1WJX Support of m2 (goes inside the 745TM)

  4 x 2864 D Screw M3x3. Most systems will have these already included. These screws hold support unit of Y1WJX m2, or a record of 2.5 inches in 745TM.

  1 x WPTND Infill of the m2. This installs in the support of Y1WJX m2.

  5 x 4270E M2.0 * screw 3 L

  1 x HR8P8 Cover thermal m2

  Find instructions here on the Dell Community.

  Precision 7510:
                                                                                                                  
  Internal dives supported: 2
                                                                        
  Drive the supported configurations: 1xM.2, 1x2.5 SATA, 2xM.2, 1xM.2 and 1x2.5 SATA

  PCIE lanes:

  M.2 housing supports 4 x

  The Bay of 2.5 inch is wired as 2 X

  Parts needed to install an m2 in the Bay of 2.5 inches are the same as the 7710 above.

  5510 precision and XPS 9550:

  Internal dives supported: 2

  Drive the supported configurations: 1 x m2, 1 x 2.5 SATA, 1xM.2 and 1 X 2.5 SATA

  PCIE lanes:

  M.2 housing supports 4 x

  The Bay of 2.5 inch is wired like SATA

  Parts needed to install a m2:

  1 x 88DJK thermal pad (no plate required)

  1 x 4270E  Screw M2X3

  Parts needed in order to add a 2.5-inch disk:

  1 x XDYGX cable

  insulator side 2 x 3XYT5 rubber

  HARD drive 1 x 3FDY3 metal support (some units may already have this even if a disk 2.5 inch was not originally ordered from Dell)

  Discussed here on the Dell Community.

  Precision 3510:

  Internal dives supported: 1

  Drive the supported configurations: 1 x 1 x 2.5-inch SATA or m2.

  PCIE lanes:

  M.2 housing supports 4 x

  2.5-inch Bay is wired like SATA

  Parts required for the upgrade of disk 2.5 inch drive m2:
  

  1 x X3YR8  Support for end of m2

  1 x 1X2MT thermal cover

  2 x 4270E  Screw M2X3

  Discussed here on SpiceWorks.

  Latitude E5270, E5470, E5570:

  Internal dives supported: 1

  Drive the supported configurations: 1 x 1 x 2.5-inch SATA or m2.

  PCIE lanes:

  E5270 supports 2 x
  

  E5570 with CPU: supports 4 X

  E5570 with processor U supports 2 X
  

  E5470 with CPU: supports 2 x
  

  E5470 with processor U supports 2 X
  

  2.5-inch Bay is wired like SATA

  Parts required for the upgrade of disk 2.5 inch drive m2 is the same as above 3510.
  

  Latitude E7270, E7470:

  Internal dives supported: 1

  Drive the supported configurations: 1 x m2

  PCIE lanes:

  M.2 housing supports 2 X

  Parts needed to upgrade to IS:

  1 x DJ69P thermal cover

  2 4270E x screw M2X3 (most systems will have at least one of them already included)

  Discussed here on SpiceWorks.

  13 9350 XPS:

  Internal dives supported: 1

  Drive the supported configurations: 1 x m2

  PCIE lanes:

  The available m2 slot supports up to 4 X

  Parts needed:

  1 x 4270E screw M2X3

  OptiPlex 5040, 7040 (Mini Tower):

  Internal dives supported: 2

  Drive configurations supported: 1xM.2, 2xM.2, 1xM.2 and 1x2.5, 2x2.5, 1x3.5

  PCIE lanes:

  The single on board the M.2 slot supports up to 4 X

  The m2 drive installed in 2.5-inch Bay: 2 x

  Necessary parts for the m2:

  Bay of m2 on motherboard:

  1 x thermal Pad J0N94 (installs on the motherboard in the drive of m2)
  1 x YYJF8 live M2X3.5
   
  2.5 inch Bay with m2:

  1 x Cable SATA 6J3FV
  1 x X9FV3 M.2/2.5 inch adapter Bay/caddy
  On the card mother m2 installation instructions found here.

  OS install notes:

  There is a storage updated driver to include PCIE support. (One that you have to install Windows see the drive during installation):

  Intel's most recent

  Dell package

  Driver Samsung

  See also: installing Windows 7 on a SKYLAKE system using MDT: http://www.dell.com/support/article/us/en/19/HOW11493/en

  Obtaining an ISO image:

  For some systems, you can get Dell operating system through Dell hosted image images

  Note: not all systems and service tags will have a picture available.

  Note: Although Dell hosted Images have USB3, they cannot understand the pilot of TSRI currently. (some may know this the pilot to F6). You will need to install the driver of TSRI manually during the installation process of Windows.

  Dell is currently working to add the driver to the TSRI Dell hosted images. No ETA on when this will happen right now.

  Discussed here on SpiceWorks.

  Other works in m2:

  Solid State Drives m2 in chipset Intel Skylake systems Imaging

  Only 1 Solid State Drive (SSD) seen on map stand

  SSD not detected at the start or restart on new precision 15 5000 (5510) or XPS 15 9550

  A PXE with M.2 Solid State Drives boot

  How to distinguish the differences between the m2 cards

  Greetings Ypyap,

  Thank you for your question.

  Yes, the Vostro 14 5468 does support M.2, according to my literature.

  You will need:

  1 x 3P44J m2 stand

  

  x 2 7CJG4 M2 * 2 live (I'm still confirming if cela good reference number)

  

• I have a WIndows 7 Ultimate operating system failure and required a drive for a clean install. I have the product key, but Microsoft offers no English option.

  I have a Windows 7 Ultimate active computer that was swarming (STRONGLY) of malware/virus/junk files/adware...

  I think I have cleaned out, but want to do a clean to be sure install, but I have no partition recovery (may be erased by a virus?) and no recovery dick.

  I went to the Microsoft website and entered my product key.  He has been recognized as Windows 7 Ultimate, but when I had to choose a language, English was not available.

  Any solution, or should I continue to use the computer and all hope is clean?

  EDIT - I installed the windows 10 (using an ISO image) on Windows 7.  I do not enter the product key when asked (the program said I could jump at this stage of the installation).  Installation went well.

  I then checked to activate Windows 10 - it activated without any difficulty.

  I will now try a clean install...

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• Development for Curve 8520

  I installed the BlackBerry Java plug-in for Eclipse (version: 1.3.0) and I have applied for my BlackBerry Curve 8520 (with OS 5.0.0). I am able to test the application on the Simulator, but I can not compile for my cell phone because the eclipse uses a JRE Version 6.0.0 and it generates a java incompatible file. I think I have to install the JRE 5.0.0 but I am not able to do that.

  How can I install the JRE 5.0.0 in Eclipse? Where can I find the JRE 5.0.0?

  You must use JRE 5.0 to compile the application.
  You can install additional JRE using the eclipse Update site at
  http://www.BlackBerry.com/go/eclipseUpdate/3.6/Java

  See http://us.blackberry.com/developers/javaappdev/javaupdate.jsp