Reset the resolution for the multimedia Dock

Similar Questions

• Need to reset the external monitor resolution in Windows Vista

  Stupidly, I changed the resolution of my new external monitor on my laptop to a not available (single mode external monitor) and received a message on the screen: "out of range" + white screen. No matter how hard I tried, I can't use one external monitor mode and must live with double display (which is a waste of energy on my tiny laptop screen). Could someone tell me please how to reset the resolution setting in Vista for the external monitor?

  Hello

  Welcome to the Microsoft Vista answers Forum!

  You can try the steps below and check if the problem is resolved.

  You can go to the control panel of the screen and reset it to factory settings.

  And if you face the same problems, then, you must contact your system provider who will be in a better position to help you reset the external screen to its default state.

  As a workaround, so check you have function keys on your portable computer, which can go from a monitor to your laptop and external monitor.

  If Yes, then try to return to the screen of the laptop and turn off the external monitor.

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I think I have to reset the SMC on my MacBook Pro, but I need MUCH more information on my MacBook Pro. For example, is the battery removable?

  I think I have to reset the SMC on my MacBook Pro, but I need MUCH more information on my MacBook Pro. For example, is the battery removable?

  Depends on what year it is.

• I don't remember the password for my TC. How can I reset the password?

  Hi all! I was not using my TC for awhile and I've totally forgotten the password. I was wondering how to reset the password.

  AirPort Utility 6.x - if you forgot your station base, airport Time Capsule or network password

  Reset a base station AirPort FAQ on resetting the base station AirPort, AirPort Express, AirPort Extreme, and Time Capsule from the airport.

• HP Deskjet 3545: How to reset the password of admin for HP Deskjet 3545. Cannot connect to the administrator settings page.

  I put a password for the printer. And whenever I try to open a session with him, he keeps asking the user name and password. So I want to reset the password or leave the field empty. Please help urgently.

  Hi @flame_ardor,

  Welcome to the Forums of HP Support! I understand you want to reset the password for your HP Deskjet Ink Advantage 3545.

  You should be able to do this by restoring the default network settings in the front panel of the DJ 3545:

  On the printer control panel, press the Wireless button. Wireless menu.

• How to reset the password forgotten for the Airport express

  I hid says on my airport express and I don't remember the password for it. How to reset the password

  If you have the version 2 ports of the AirPort Express, connect your computer directly to the LAN <>- Express port to see if you can access this way AirPort Utility.

  AirPort utility is as follows on your Mac: Finder > Applications > utilities > AirPort Utility.

  If you can 'see' the AirPort Express in this way... click on the image of the AirPort Express

  Click Edit in the window that appears

  Click on the menu on the Basic Station ... to the top of the screen, where you see the icon Apple, file menu, edit the menu, Menu Help window menu, etc.

  Click Show passwords and you will see your forgotten password

  

  If you are unable to access the AirPort Express Terminal using wired Ethernet, you can reset the password using one of the methods described in this excellent forum Tesserax an expert user tip.

  Airport - access to forgotten passwords

• HP Pavilion Notebook - 15-p233: need help to reset the password for notebook 15 "pavilion

  I need to reset the password for pavilion notebook 15 "15 p 233

  could you please help

  The error code generated after that 3 test is 687 47 264

  Thanks for your help!

  @simpleuser001

  Enter: 77625860

  Kind regards

  DP - K

• How to reset the password for BIOS on Satellite A15-S127

  What is the best way to reset the password for boot/BIOS/CMOS on a Satellite A15-S127? I saw notes on the creation of a parallel loop, but I can't find the technical notes on how to make one. Even if I can make one, it will work on this model?

  I don't remember seeing "Clear CMOS" riders on the map and I heard that remove the CMOS battery does not reset the password if you need access to the BIOS later.

  Can anyone help?

  Hello

  I'm not sure of the A15, but as it is the American version of the A10, the BIOS password reset method should be the same. You need a special adapter PCMCIA. And the bad news: only Toshiba service people have this adapter. He must therefore go to a service partner.

  Good bye

• How can I reset the password of admin for HP Deskjet Ink Advantage 2545

  I lost the password to unlock the settings of the printer. Is it possible for me to put this?

  Welcome @jaraneta,

  Thanks to their participation in Forums of HP! I see by your post that you need to reset the password of the printer. I will definitely do my best to help you.

  I can send you this information in a private message.
  In the forum next to your name to handle just click on the envelope
  to see it.
  
  Feel free to click on the button "Accept as Solution" and the
  'Thumbs Up' for my help. Please let me know the results
  and if there is anything else I can help you. Thank you!

• HP Officejet 6700 Premium e-a: how to reset the password for the admin on my officejet 6700?

  Lost my password to admin for web-server software...

  Hello bsquirrel,

  Welcome to the HP Forums.

  I see you want to reset the password on your printer.

  From the main screen on the printer, use the arrow key to the right and select the Setup Menu.  Use the right arrow key again and navigate to and select the network menu.  Scroll down the page until you see the default network and select Yes to restore.

  Once that finished, scroll to the top network Menu and run the Wireless Setup Wizard.  You will be asked a new network password.

  I hope this is the information you're looking for.

  Thanks for your time.

  See you soon,.

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• How to reset the password for iomega storecentre ix2 without losing my data

  Im having a problem accessing the iomega storecentre ix2. I can not connect on the nas server. How can I reset the password without losing my data on it. It is avisable to reset using the reset button without losing my data?

  Thank you!

  AJ

  Hi altagumasi,

  The reset button of the pinhole on the rear panel of the unit resets user and network settings. It will not delete your data. Press on the reset button for 15 seconds and the device should restart. After the reboot, you will go through the initial setup process.

• I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

  You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

  copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

• Create a table in a loop 'for' (reset the number of loops)

  Hello

  I try to incorporate a signal of acceleration from an analog input CRIO to get speed and then further integrate to get the moving of a vibration system.

  I understand that to achieve integration, a table must be fed in. My problem is that I could not buffer the signal in a buffer block, as I couldn't find buffer blocks. so I decided to create my data table by using a loop "for". The nests of the loop 'for' inside a timed loop. The problem that I'm stuck on is how to reset the loop 'for' in order to fill the buffer with each iteration of the outer loop timed.

  I enclose the code if that helps. Note that I use labview in 2013.

  If anyone who has encountered a similar problem before can help me, I would be gratefull.

  Concerning

  Ali

  You can use a shift register initialized as inputs to your curls, to build your table of one. However, you realize, don't you, that the execution of your program as written loops as soon as the computer can spit out responses, then the output array may contain several points that took place before the entry has updated? Assuming that your thing cRIO (I've not worked with these) has integrated into its routine acquisition of calendar data, I suggest you put that inside the loop to get a data point by reading.

  And do you really want your graph to distance for update only every thousand points (points of acceleration million) speed?

  Cameron

• Dns resolution for a sub.domain with some ISP DNS external in the management of the DNS (win20008 r2) service?

  Hello

  We have a domain.   www.mydomain.be.

  It is a public domain managed by our office.

  It is also the same for internal network active directory domain mydomain.be

  Of course, we have internal DNS in our active directory.

  the Registrar has created a subdomain.  www.Sub.mydomain.be

  My question is: how to solve (for my network internal only) sub.mydomain.be by the DNS of the ISP.

  --> How to work around the internal our DNS resolution for the sub.mydomain.be ONLY for the 'DNS ISP or registrar "?

  our internal DNS (r2 win20008 in active directory) must continue to resolve all applications except the sub.mydomain.be.

  Create forwarders? or another technique?

  Thank you

  Hassan,

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.