Reset the transformation point

Similar Questions

• I'm going through the first tutorial, and I can't take the transformation point on the leg of the Apple Board skateboard.

  I'm going through the first tutorial, and I can't take the transformation point on the leg of the Apple Board skateboard.

  Hello. The transformation point is visible and you are unable to drag and drop or if it shows any? Make sure that you have selected so eager to set the point to transform the free transform tool.

• How to reset the curve point selection

  I downloaded a free version of VSCO presets as a test. I'm trying to remove them from the LR CC.

  I got them removed from the presets area by following the instructions here:
  https://vscoVSCO-Film-for-Adobe-Lightroom-CC-6-5-4-How-do-I-delete-my-old-presets-.zendesk.com/hc/en-us/articles/200324840-

  However, how can I remove the curved Point selection menu (see screenshot)?

  I asked the question above to support VSCO and their eventual response was:

  I'm sorry to say, but I think that the best next step would be to contact Adobe to see how to reset this menu. If you would please join Adobe support, they would be more than happy to help and answer your questions

  Here is a link to their support page: https://helpx.Adobe.com/support.html

  Thanks in advance

  

  @johnrellis thanks for the reply. The information provided is not the correct way to reset the Point curve menu.

  However, your suggestion did point me in the right direction. For future readers, (in Windows 8 at least), go to the following location and delete the content in the folder:
  C:\Users\\AppData\Roaming\Adobe\CameraRaw\Curves

  HIH

• NFC: Is there a way to reset the reading pointer?

  When playing a NDEFTagConnection, read() reads the next message NDEF.

  Is it possible to return the 1 message to read it again?

  I want to:

  1. read a message NDEF

  2 - update and write the message NDEF back on map

  3 read the NDEF message to validate

  Is it possible to do without having to close / reopen the connection?

  No, it isn't.

  Is there a reason, you feel that you must validate after writing?

• to scale from the center point

  In photoshop, if you hold down alt + shift when you descale going from the center point... so that you won't lose the positioning of what it is, that you are scaling.  Is it possible to do with Flash as well?  If this is the case, it is not with the same shortcut keys.  It would be useful to be able to do in the design of some things.

  in the ide, you can click on the transform tool to move the transformation point as much as you like.

• Resets the pointer speed after start/sleep

  It's my first time having to do deal with this (I use a logitech g5 on my desktop which uses the set value), just got my t430 yesterday and I cannot get the 'pointer' speed to save. It keeps resetting default after that until he goes to sleep or restarts.

  I use the max sensitivity for the 'pointer' (i.e. in this case the trackpad), so it is VERY sensitive when it resets to 50%

  Not the exact solution, but after reviewing set points advanced settings I checked 'Settings Retain OS' and now he saves.

  No idea why it works that way, given the set points is just for my wireless m510, but he did lol

• Object > transform > reset the rectangle enclosing do not work.

  Hi, I make a biconical mark, I'm doing a square with M, turn 45 degrees and then I did "object > transform > reset Bounding Box" and nothing happens. How can I solve this problem? I have the latest version of Illustrator 19.2.0

  Thank you

  You must use object > shape > expand shape to develop the direct form before resetting the rectangle encompassing work. Yes, Illustrator must be smart enough to perform this intermediate step for you, but it doesn't.

• Vector glitch of anchor points with the transformation of the cs6 illustrator objects

  Vector anchor points glitch during the transformation of objects,

  It is if I create a square and turn it, let's say I have it increase by 200%, it creates additional anchor points in the square corners and also creates weird crenellated edges, when I hover over the square with the slider to show the edges, the line from the edge which shows blue is shifted in at the edge of the actual object reference (see attached img the orange object displays the quirky plan and the black object is supposed to be a) round square edged, but after that I turned (Shear 10 degrees) it apeared of curves in stairs)

  I already tried to launch updates and restart, but the issue continues to display.

  Thanks in advance for your help.

  Rob.

  

  Looks like it's related to 'snap to grid of pixels.

• Free transform: drag the reference point?

  So when you use the transform tool it has a button to change the reference point at 9 different locations. But I need set the reference point at a specific location in the image. Can't I put manually, by dragging or something?

  While you can do in the full version of photoshop elements

  does not seem to allow for this.

  MTSTUNER

• I work with Elements14.  I finished a project that is 04:00 long.  My CTI continues to operate beyond the end point of the video and music and transformed the project in 10 minutes long!

  Here's what I did: on the track of music, I ran the excessive music, no return at the end of the clip I used.  I also used the CTI scissors to cut the surplus, and I deleted it.  I have a click with the button straight on the ICT and found the add point final cmd and he added.  But, CTI continues to flow to the bottom of all tracks... Finally to 10 minutes more.  Apparently, there is something on one of the tracks that the CTI keep following, but it is not visible on the voice track, music or video tracks.  What have I done wrong?

  

• New update has changed the behavior of the anchor points on the ellipses - frustrating!

  The new update has changed how anchors work on ellipses (at least - maybe other forms, too). It was I had the area around the ellipse and with the selection tool, I could drag the 4 anchors around the ellipse for the shape I wanted. Now anchors on both sides are working this way, but the other two across the entire ellipse! Is there a way to recover the old anchors?

  I also get a lot of weird behavior when copying and the adjustment of the ellipses. Sometimes the bounding box is around the new ellipse in that I paste. I have to go back and forth between the select and direct selection tool, and finally he will come to the top. :-/

  Thank you!

  Matt

  Yes, I see that they make in an arc/ellipse tool where you got the opportunity to make a thing of pie-chart-in searching for Pacman.

  In addition, reset the rectangle enclosing do not work on this thing.

  The answer is, they are slowly but surely adding more robust features for 'shape' elements in Illustrator. The difference between a 'form' and just a path in the shape of form, it's that a 'form' is made with a tool of shape as the Ellipse tool or a Rectangle, polygon, etc.

  Or a form can be made to take a path that meets the criteria: for example, a rectangle of any rotation that has 4 points at all the right angles. You can experiment by drawing your own rectangular path and lining up all the points so that your angles and lines are perfectly straight and using the object > shape > convert to the form menu item. However, if you add even one point back to the sides of the rectangle, the form will automatically extend to return to the regular way - which will be exactly the same in terms of the look you see on the screen.

  The difference between paths and shapes is that forms give you additional properties, which you can change using the area at the bottom of the transformation Panel. For rectangles, it's just the corners and the width/height, but for ellipses, it's now this pie thing.

  Anyway, even if I can't find any options to create shapes already developed using the shape tools, you can scale your ellipse using the transform tool manual (E) which dimensionnera the horizontal ellipse, or you can use the object > shape > menu item to expand whenever you make an ellipse. This could be done more quickly by recording an action and assigning a shortcut key, so you can convert out of any shape in a simple path.

• Difficult question, why the transformation Panel said 'no shape properties' when I select a path?

  Hey, Zuko here (no, really I'm Erik)

  I have a bone to pick with the AdobeIllustrator CC race Committee.  Before, I thought I knew everything there was to know about this Panel.  But now, I hit a road block, it seems that no one else in the internet faces.  My question has to do with how the traces of the pen are treated by the race Committee and (I guess) if they are recognized as "smart shapes.

  Here's the problem: normally when I create a path with the pen tool, I can immediately afterwards, select it and transform it using the Panel forms (especially the transformation Panel).  This means that I can choose the width of profiles, create dashed lines, etc.  However, something happened to illustrator between yesterday and today (I don't know what) and now when I create a path with the pen tool and select it, the transformation panel reads: "no available shape properties." Or something between these lines.

  I am currently using Adobe Illustrator CC as I already said, my operating system is Windows 10, and the only thing that has changed in the way that I use work is connect with the intuos pen tablet.  (Not plugged in now, I'll perform an exorcism on her.)

  That's all for now, I don't have screenshots, but once I get off work in 8 hours, I'd be happy to give them.

  This is my desperate hour... Help Adobe creative community, you're my only hope. * static *.

  -Erik

  Erik,

  If not more specific/bright suggestions appear, you can try the list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• For 2 days were not able to access the App Store and regular a few adds on my iPad, but can be downloaded on my iPhone. I have reset the router, iPads, etc... No change. Help, please

  I can't access AppStore and some other operations ordinary adds on my iPad. Have reset and all routers. All updates current. I can do on iPhone. Is it me or Apple or what? Help, please

  Hello there jacquelinefrombburg,

  Welcome to the communities of Apple Support! It is a great place to get help with connection problems to the App Store and access other applications on your iPad. I know that there are some applications that I rely on every day, so I'll do my utmost to help find a solution.

  As point of departure, we will you force him to close all open applications on your iPad. Once you've done that, go ahead and reboot your iPad. Once it is up and running, test on the App Store to see if you are able to access. Here are some useful resources to guide you through the process described above:

  Force a nearby application on your iPhone, iPad or iPod touch

  Restart your iPhone, iPad or iPod touch

  If you still have questions, see the steps in this article. Even though the title says iTunes Store, the recommendations would still apply to the App Store.

  If you cannot connect to the iTunes Store

  As a step in isolation, it would be wise to check if you have problems with the App Store and other applications while using a Wi - Fi connection and cell phone. If the problem persists with the two types of connection, try resetting the network settings on your iPad. Please note that you erase all the stored passwords and Wi - Fi networks. To complete this step, go to settings > general > reset > reset network settings. After you restart your iPad, test the apps again.

  Take care!

• I need to reset the password. Can't do Internet Igbo connecton

  I need to reset the password. Can't reset without the Internet. Cannot connect Internet cause without password to start macbook

  Reset password

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• reset the clock on HP Officepro 8600

  Clock on 8600 is slow about 14 minutes. How to reset the clock on the printer?

  Bussaad,

  Welcome to the HP Forum.

  You can set the internal clock of your HP 8600 printer using the Web integrated (Embedded Web Server) server.

  The built-in Web Server provides a web server access point to the IP address of your printer - go you to the Page "" through your browser.

  Your printer user's guide , page 232:

  To open the built-in web server
  NOTE: The printer must be on a network and must have an IP address. IP address and
  host name of the printer are listed in the status report. For more information, see understanding
  the Network Setup page.

  In a web browser that is supported on your computer, type the IP address or host name assigned to the
  printer.

  For example, if the IP 123.123.123.123, type the following address on the web
  browser: http://123.123.123.123

  TIP: After you open the built-in web server, you can bookmark it so that you can return to
  It quickly.

  TIP: If you use Safari on Mac OS X browser, you can also use the Hello
  bookmark to open the integrated Web server without having to type the IP address. Use the bookmark of Hello,
  Open Safari and then in the Safari menu, click Preferences. On the Bookmarks tab, in
  the bookmarks bar section, select include Hello and then close the window. Click on the
  Favorite Hello and select your network printer to open the integrated Web server.

  ===========================================================================

  Open the support page of SAP for your printer > settings > Preferences >

  If you have assigned the EWS security access, enter "Admin" and the password you have assigned to be your EWS page >

  Date and time >

  Next to the current device time > update time as you want

  Apply

   

   

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.