to scale from the center point
In photoshop, if you hold down alt + shift when you descale going from the center point... so that you won't lose the positioning of what it is, that you are scaling. Is it possible to do with Flash as well? If this is the case, it is not with the same shortcut keys. It would be useful to be able to do in the design of some things.
in the ide, you can click on the transform tool to move the transformation point as much as you like.
Tags: Adobe Animate
Similar Questions
-
It started after a message popped up on Adobe Reader and I deleted it. I tried to run applications without success.
Hello
Welcome to the Microsoft Community and forums thanks for posting the question. According to the description, you get messages from the center of the Action as McAfee and the Windows Firewall is disabled.
Please answer a few questions to refine the question.
1. you remember to make changes to the computer before this problem?2. you have more of a security software installed?Anti virus definitions update and check the statusMethod 1: I suggest you to enable and disable the Security Center
service in Windows 7:
a. click the Start button, type services.msc and pressenter.
b. in the list of Services, right click on Security Center, clickingProperties
and select disabled.
c. restart your computer.
d. once again, follow steps a and b, and then select Automatic (delayed start)
e. start the Service.Method 2: You can uninstall and reinstall the security software and check.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-programMethod 3:
Restore the system to an earlier point before installing this application.System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
More information on:
System Restore: frequently asked questionsHope this information helps. Please reply with the status so that we can help you. -
Cut a circle from the center of the image?
Hi all. I am a noob to photoshop but am learning fast. I'll have a little to hurt something I imagine most of you is quite straightforward. Help, please
Basically, I have a square image (3000px x 3000px) and I want to cut an exact circle from the center of the image. So I choose the Ellipitcal selection marquee tool and put my cursor around in the center of the image, hold down the SHIFT and ALT, and then drag to the size of the desired circle. Then I press V to bring up the alignment toolbar hoping I could Center the selection to the exact middle of the image, but I can't. PS won't let me select alignment buttons. Please can someone tell me where I'm wrong?
After that, I want to take the image of CUT and paste as a new picture, while I have just the circle and its content and no rectangular background. I don't know STICKING will do, but I can't get that much.
Help, please
Thanks in advance.
One option:
Elliptical selection tool
Select > transform selection - enter the coordinates of the Center reference point the median point of the canvas.
Make your cut or whatever.
I am appalled by these fields coordinated not allowing a percentage (of a size of canvas) or simple to provide arithmetic expression. This seems like a basic functionality of conviviality that should have been years ago. Am I missing something?
-
Scale of the Center Actonscript
Hi I have a very simple page with 12 invisible buttons, I applied actionscript to grow/shrink the movieclips below on rotation / deployment... only problem is that they are more and more the top left edge... not the center of the MC... How can I do the MC grow / shrink from the Center?
Thank you
MartinOK, so here is how I did it...
I went in each MC and pressed the button Edit several images, which is under the timeline. Then changed the position of all the frames in the MC at the same time, so that the alignment point was the Center.
-
My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.
I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.
I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.
I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n
I need step by step instructions on this Yes please treat me like a fool!
Thank you
Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)
After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!
-
How to change the width of the div CSS from the Center?
Very basic question here, but I'm relatively new to DW. Please use the following url for reference: www.pawnpawn.com.
Basically, I inherited the site of a previous Designer, who is no longer available. All I want to do is expand the container with our Services, how it works, etc so that contact us either on the same line with the rest. I know how to expand the container in CSS, but it grows to the right instead of from the Center. Here is the original code, without the new specification of width:
#nav {}
display: block;
text-align: center;
border-top: 1px solid #d3d3d3;
border-bottom: 1px solid #d3d3d3;
margin: auto 10px 0;
min-height: 35px;
Padding: 12px 0 0;
If I add "width: 1100px;" he broadens it properly, but not Center. I tried "align: center;" but it was just a guess, and it does not work.
Any help would be greatly appreciated, thanks in advance and sorry for this fundamental question!
MP
Line 24 of skeleton.css says
. Container {position: relative;} Width: 960px; margin: 0 auto; padding: 0; }
If you change the width, you will get what you want. The problem is that the entire page will be the new width. You then have the choice either redevelop available to suit or wrap the rest of the page in another container with the width of origin.
-
Within edge can extend an image from the Center on?
Ok. I have this picture fuzzy, placed on the edge and I want that it stretch it on the screen.
I have it. Very easy. However, it develops or extends from the left or right and not from the center outwards.
I want the image to animate as indicated by these < - image - > arrows (from the Center out).
I would like that to happen. Any ideas?
Thank you
mast
Here's a sample:
-
Tool to scale ~ how to change the center point by default?
How can I change the default center point? I want it to appear, for example, at the bottom of the objects, instead of the Center. Thank you!
Hi Francine
I think you can see that the alignment (in the Control Strip) point determines where the transformations begin to.
-
Hello
I have ColdFusion 9.0.1 (Enterprise edition) installed, with 4 fix Cumulative and Security Patch APSB13 & 27 applied to this subject. Details of current version is present as below:
Version: 9,0,1,274733
Update level: hf901 - 00010.jar
My question is, is an update of version 9.0.1 9.0.2 really necessary from a safety point of view? 'Truth' is not a problem for me, because I don't think that I use, and the presence of truth is not a problem either.
Are 9.0.1 with the above security updates and the version 9.0.2 with security updates the same from a security point of view, or to win greater security if I update to version 9.0.2?
Thank you
Arun
Hi Arun,
There is no mandate to go to CF 9.0.2. As ColdFusion 9.0.2 update is a sum of ColdFusion ColdFusion 9.0.1 fixes cumulative 1 and 2 9.0.1,, all 9.0.1, without truth ColdFusion security patches so you get the same security updates in version 9.0.2 which exist in version 9.0.1 but without truth but there is a JVM update
You can check the changes mentioned in the CF 9.0.2 release notes: http://helpx.adobe.com/coldfusion/release-note/coldfusion-9-0-update-2.html
There was a fix for CF 9.0.2 version can be found here: http://helpx.adobe.com/coldfusion/kb/cumulative-hotfix-1-coldfusion-902.html
The last update for CF 9.0.1 is http://helpx.adobe.com/coldfusion/kb/coldfusion-security-hotfix-apsb13-27.html
Check this article as well: http://www.carehart.org/blog/client/index.cfm/2013/8/19/understanding_ColdFusion_9.0.2_a_F QA you will find this article very useful
HTH
Thank you
VJ
-
How to create a circle from the Center?
Hello. I'm using PS CS3 and I want to create a perfect circle around the Center. How do you do that?
I know not pressing SHIFT while dragging makes it perfectly round. I also read that pressing alt at the same time he draws in the Center, but it does not work, it just all just with the eyedropper tool. Am I missing something or is there another way to do it?
Thank you.
Hello
If you click and hold the mouse pointer and press the Alt key and drag, it should work.
In addition, once you start dragging, add the SHIFT key to constrain to a circle.
-
Move the center point to the triangles.
I'm trying to get a triangle to turn in place,
but the central point of the coast is not centered!
I can move it? Other solutions?
The triangle in the Center IS lining up vertically. When you align Flash-shaped, it calculates the position relative to the rectangle enclosing.
If you want to center around what is mathematically one of the centres of the triangle, you need to adjust that manually. Are there any tools for this.
If you want to create equilateral triangles, you can consider a circle (shift + click & drag), then a triangle in the same Center, which become a symbol, then remove circle encompassing.
-
How can I get my name from the access point?
Since I bought a modem Arris 228 G and spent my 2 wireless, printers Canon WIFI unable to connect at Optimum!
Canon said to contact my router creator (Apple Airport Extreme) for the name of the access point get return wireless, WI - FI printers.
Help, please.
W.W.
(Mac Pro 10.6.8)
The name of the access point is simply the name of the wireless network that provides AirPort Extreme.
You can see the name of your wireless network by clicking on the WiFi icon at the top of the screen of your Mac and by checking that the name appears.
There will be a check mark next to your wireless network name.. which is also known as a wireless access point.
It would be the same name that you had before... unless you have changed some settings on the AirPort Extreme.
-
Why my cd s divided from the center of the thenthey are not playable?
CDS split since the middle of the ward, and then they don't work it's been on 5 CD diff now so I think go a diff consloe
Hi darrensyer,
From the sounds of it, I think you can refer to your Xbox and Xbox games?
If so, please transfer your question into the Xbox forums.
Thank you!
-
More iPhone 6s and Adobe Illustrator drawing
When establishing, too much pressure removes the gesture and replaces it by a straight line connecting the initial start of the drawing just under the pressure point. This makes delicate drawing impossible. This affects all types of brushes and occurs when you use your finger or the stylus. Deleting the app, reboot the iPhone and reinstalling does not remedy the problem.
As long as we don't have contact with the screen and varies the pressure beyond a certain point, the gesture will be constantly removed and replaced by a straight line. This issue was present in the previous version, and in the course of December 3 update.
Carlos,
Thank you for reporting this issue. We have a fix for this issue will be released soon. Are you interested in helping us test the fix?
If so, please join the preliminary program of the draw the fate by filling out this short questionnaire.
https://www.SurveyMonkey.com/r/FTDMDX3
Sorry for the inconvenience.
-Draw Will, product manager, Adobe
-
How to create an effect of selection of text to individual character from the Center.
I created text with characters selectors, but they always start with the left. I have a link to a file that shows the text forming the Center with a rebound of disintegration which moves to the left and the right. Is there an easy way to do this? The text in question is called 'Danny Winokur' in the video.
Thank you
IRAhttp://www.mediafire.com/watch/x6exk3aqa9qtaoe/danny_winokur.MP4
You would use just two selectors / facilitators.
Mylenium
Maybe you are looking for
-
I need to access older versions of FireFox and checksum for these files.
For each version below, I need to download installation file and checksum md5/shaXXX of Mozilla for each download. WindowsOS: Firefox v3.5, v3.6 Solaris 10 x 86: Firefox v3.5, v3.6 Solaris sparc: v3.6.17 Firefox filename: firefox-3.6.17.en-US.solaris
-
Help! Get pop-ups with CODE of ERROR: sec_error_X1X510_A
I have an iMAC end of 2012, 3.4 GHz Intel Core i7, 16 GB 1600 MHz DDR3. NVIDIA GeForce GTX 680MX 2048 MB, El Capitan iOS When you use Safari, Google home page, I type a domain and it goes to what I believe is a pop-up fake Apple Support with CODE of
-
Stack memory to the HP Photosmart m417 camera
My chip memory SD for the M417 camera went wrong. Can I replace a Micro SD chip in an adapter instead of the SD chip?
-
the easiest way to copy entire disc of C, new drive system
Have the new computer, want to copy existing info drive c to the new computer. Also have the new eternal hard drive to use. An old simple copy and paste again Dr. external would work better? Or y at - it an easier way to do and lose any data?
-
A DesignJet 1055 CM (model A, c6075a) would work OK with Mac OS 10.7 (Lion) or 10.8 superior? I don't have a Mac; I plead for a potential buyer of my 1055CM. The 1055CM currently has 96 MB of RAM; I could put 128 MB in. I would get "out of memory" p