Reset Windows 8.1 problem

Similar Questions

• There was a problem of reset your PC - new Windows laptop, 8 problem

  Hello

  I just bought a new laptop Windows 8, but it was the demo model so I want to reset to factory settings before using it, but I keep getting the message "there was a problem of reset your PC. The refresh option works well, it is just reset that I have problems with.
  Any ideas?
  Thank you!
  I had the same problem, my new laptop dv6 HP Envy series of reset, and nothing seemed to work... I've uninstalled and reinstalled the drivers, tried setting the registry and updates, and pretty much abandoned when I came across something that finally worked.  Your mileage may vary, as seems to be to use a HP tool, but other laptops probably have similar software.
  1. first of all, go in the menu settings of Windows 8 in the bar of charms
  2. Select "General" on the left, then select "Advanced Startup" down to restart
  3. now, after the laptop starts up to the blue options screen select "Troubleshooting" and then select 'Advanced Options', then 'settings of UEFI firmware.  Reset by selecting or refreshment of the options screen always gave me the error message and it was to square.
  4. now, I get a Start Menu ASCII with several choice of function keys, including "System Recovery", which is what I chose.
  5. now I'm prompted to my keyboard, and then I get another blue screen "Choose an option" a bit different from the one in step 3, and then select "Troubleshooting", but then "Recovery Manager", and "Windows 8".
  6. I get the recovery of HPs Manager menu, when one of the options is "Minimizes Image Recovery", which restores the operating system to a State of minimal factory.  Choose this one and wait for about 45 minutes, while the installation of HP software tool does its thing.  It seems to take a little more time to reset the system in this way does it in the usual way for a reason, but you do not get near the amount of bloatware.
  I don't quite understand why this works and is not the usual way of resetting of the operating system, but I guess that something is messed up in the registry or config file, preventing Windows 8 by using some of the Tools System.  By selecting the UEFI firmware settings, however, gives us a way to launch the system from the recovery partition tools.  I'd be curious to know if anyone else gets it works, or has any idea why it works.
  In any case, I think that it's major design flaw: the possibility of calling to zero/restore the operating system should not be heavily dependent on the OS installed, because usually people want to do that once the OS itself is messed up.  In addition, the fact that you have to plow through so many menus to find the good solution is also an indicator of poor design (this criticism applies to a large part of Windows 8).
  -b.

• Google Calendar becomes inactive in Firefox. Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.

  Google Calendar becomes inactive in Firefox. Can not navigate, cannot change the appointments, can only view an appointment, then freezes and nothing is more possible.
  Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.
  Firefox 28.0, Windows 7.
  Google Calendar is OK in Android and syncs with my PC OK.
  Works fine in Internet Explorer.
  Please notify.

  The extension Freeven pro is probably the problem. Only that disable and check again.

  If you have the same problem after having disabled the extension pro Freeven then, disable graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  In safe mode hardware, acceleration is disable by default.

  Thank you.

• Visa window has a problem that prevents me to update windows

  Impossible to verify the update for Windows Defender

  Cannot enable virus or spyware protection

  Hello
  (1) have you made changes on the computer?
  (2) you get error codes?

  Method 1: I recommend you perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  
  Method 2: Run the fixit available in the link below to reset windows update components.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
  Note valid also for Vista.

  Once the above steps are done, please try to update and check if it works.
  I hope this helps!

  (24/06/2012 07:40 am): Hi,.
  (1) did you do any chnages on the computer?
  (2) you get error codes?
  Method 1: I recommend you perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  Method 2: Run the fixit available in the link below to reset windows update components.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
  Note valid also for Vista.
  Once the above steps are done, please try to update and check if it works.
  For reference, you can click on the link below:

  http://support.Microsoft.com/kb/2509997
  I hope this helps!

• Message: Service dependecy or groups could not start "when you try to connect to the internet from a wired computer.". Is there a way to reset windows?

  My system can not go on the internet.  I get this message at the dependecy service or groups could start "is there a way to reset windows in vista with deleting all of my files?  I have a return to the top of vista on drive d.  How can reset these settings? The router and modem are fine.

  My system can not go on the internet.  I get this message at the dependecy service or groups could start "is there a way to reset windows in vista with deleting all of my files?  I have a return to the top of vista on drive d.  How can reset these settings? The router and modem are fine.

  Suggestions:
  1. temporarily disable your antivirus software. See if the problem has disappeared. If so, the time to consider a different security program.

  2. Do a system restore, if you can pick a date when he did not have this problem as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  3 do a file system check. See if the file check can find any corrupt fields and fix.

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to reset Windows 7 password with USB

  The first thing we often do when we * password lost Windows 7 * is to ask an it expert for help. However, it is only a moment for you * forget password Windows 7 * and it may take you several days to regain access to your system. Later, don't worry about anything when you forgot the password for windows 7. The article will give you some ideas for * reset password Windows 7 * with USB drive.

  * Chapter 1: Reset password reset Windows 7 password disk.*

  Most people know generally only how to create a new user with a password or change it. But they do not develop a habit to create a password reset disk to prevent the lost password. This is an excellent and free Microsoft gift. Click here to learn how to create the password reset disk in windows 7 If you loan have a reset disk, follow these steps:

  Step 1: Start or restart your computer, insert your USB key. In the home interface, press ctrl + alt + delete, enter the classic logon box. Then type the user name that you want to use and a wrong password or leave the field blank, and then press ENTER or click OK. It will show you logon has failed.

  Step 2: Click on * reset password *... it will show you the password reset Wizard. And it allows you to create a new password for your user account. In the password reset Wizard dialog box, click on * following *.

  Step 3: Select the disk that you insert, click on * following *. Type a new password in the Type a new password box, and then retype the password in the Type the password to confirm box. In the Type, a new indication of password box, type a hint for the password or no, and then click on * next * → * finished * and then try to open a Windows XP session again when to use the new password you just put.

  EC * USB password reset disk * use only in a certain account that you have created before, or it will not help. Therefore, it is best to create a password reset disk when you add a password to the account.

  * Section two: Reset Windows 7 password Windows password rescuer run from USB drive

  If you have not created a password reset disk for your account and unfortunately you lost or forgotten windows password, see below. I'll show you a guide step by step to do this task in minutes with USB, without reinstalling the system or loss of data.

  Step 1: Prepare a 2 GB USB flash drive and a computer that you can access.

  Step 2: Download Windows password of lifeguard and install it on a computer on which you have access.

  Step 3: Run the program and burn the ISO image to the USB Flash drive.
  * NOTE: * this action will make your formatted USB drive and all data in it will be lost. You would provide better with nothing in it.

  Step 4: Use the USB to reset the password of windows 7. Before this, you must set your start your computer by USB. Then start your computer and enjoy the process of resetting the password, it is easy and fast. Don't worry if you are struggling for the parameter, you can see more in the Windows bios password rescuer website.

  Posting of interest. Thanks for this detailed description and useful links.
  If you have more interesting things to share with us you are welcome.

• HP p209tx: reset Windows 10 drivers are deleted

  I have just reset windows 10 as couple of things was defective. What he did, it was that he erased all my drivers provided by installed with my PC.
  
  When I was using Windows 8.1, reset, that it didn't erase my drivers.

  but now all my drivers are deleted how can I get it back

  Drivers for Windows 10 are at the following ADDRESS of HP.

  http://support.HP.com/in-en/drivers/selfservice/HP-Pavilion-15-notebook-PC-series/7486459/model/7584268

• HP655 update for windows 8.1 problem with Realtek driver

  Need help with the problem addressed in another forum HP.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/HP-655-update-to-Windows-8-1-problem-...

  The last message point far on this forum to get help.

  -----------,

  Install the new Bios and the network works

  655 HP

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• You have given permission for am Act to Windows to resolve problems on the pc

  Original title: am

  You have given permission for am Act to Windows to resolve problems on the pc

  A quick Google for "Am" indicates that this is a scam.

  http://www.Google.com/#hl=en&source=HP&q=Comantra&AQ=f&AQI=&OQ=&FP=64df356c6a3f8304 MS - MVP - Elephant Boy computers - don't panic!

• My Windows XP has problems with shlwapi.dll

  My Windows XP has problems with shlwapi.dll and there are plenty of sites to download, but they all want money, why don't misrosoft not has an answer for this problem. When I try to update to internet explorer 6 to explore 8 then the error always pops up saying: you have a problem with shlawpi.dll and he can not continue... Very very frustrating.

  In general, it is not a good idea to download dll files.   See, for example, http://pcsupport.about.com/od/findtheproblem/qt/dll-download.htm

  If you explain more in detail what your problem is, including providing the full text of the error without paraphrase, it is likely that someone in the appropriate Microsoft Answers forum will be able to help.

  Because it seems that your problem is related to Internet Explorer, you are more likely to receive help if you post in the forum Internet Explorer, where there are already many threads dealing with issues of shlwapi.dll on IE: http://answers.microsoft.com/en-us/Search/Search?SearchTerm=shlwapi&CurrentScope.ForumName=ie&CurrentScope.Filter=&askingquestion=false

  If you look through some of these threads, you can find the answer to your question without further delay.  If not (or if you just want to watch), do not forget to include not only the text of the error message, but also the version of Windows XP, you have (Home, Pro, Media Center) and its service pack (start > run > winver > OK).

  And, based on this thread - with what seems to be your exact problem - also include responses to the following questions (there no answer, certainly because the OP has NOT provided to the request for information):

  1. what application or anti-virus security suite is installed and is your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  3 is installed WinXP SP3?

• Windows XP Backup problem, cannot find the backup utility

  original title: windows xp backup problem

  I have a system with windows xp, I tried to backup the drive c: to the top, when I click on start, all programs, accessories, System tool, I see how to do anything else but up... i back cant find utility backup click on... then save my c: drive?

  Hello

  I suggest you follow the steps mentioned in the article given below to install windows on the system backup.

  How to install backup from the CD-ROM in Windows XP Home Edition

  http://support.Microsoft.com/kb/302894

  Also, I suggest you return the article mentioned below to learn how to use the backup utility.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

• Windows 7 installation problem Pavilion dv6-6c45eg

  Since I have a free license for windows 7 Professional at home, I decided to install it on my new Pavilion dv6-6c45eg that came with Windows 7 Home Premium.

  The problem is that the installation process stops at the beginning and said something like: "A required CD/DVD drive driver is missing... ", then he gives me the choice to load a driver. I googled a lot since yesterday and there seems to be something related to the SATA driver, however even load the SATA driver installation is not moving forward, after loading the driver it say that no new units have been detected.

  What I tried:

  * Install Windows 7 x 32 and x 64
  * Install from a USB flash drive

  * Install Windows 8 (same problem in Windows 7)

  * Check the SATA in the BIOS (not possible to see or modify on the BIOS F.19)

  * Search for the shortcomings of HD (even changed the HD)

  I'm sure it's something related to a driver, because I also installed Linux (OpenSuse, Fedora and Ubuntu) operating systems and they work fine.
  So, I would appreciate help to solve this problem.
  Thank you very much.

  Marcio

  Hi B Mista, thanks much for your reply, but I finally solved the problem, as described in this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

  Kind regards

  Marcio

• Printer problems due to software on my windows vista desktop problems

  They told me that I have a software problem on my windows vista desktop, because - my printer print test page, but seems to have a communication problem with some of the jobs I want to print. I can't right click and print. Someone at - he heard of this problem and might be able to give me some advice?

  Hello

  1. What is the exact error message?

  2. What is the brand and model of the printer?

  3 have there been recent changes made on the computer before the show?

  Please follow the steps below and get back to us with the results.

  Method 1: Run the Microsoft fixit and check if it helps.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2: R the print service spooler and verify.

  You must be logged on as administrator to perform these steps.

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Update the printer drivers and check.

  Find and install printer drivers in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  For more information, see the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps!

• Windows Services has problems and get the error code 80246008 when I try to update windows

  I have 64 bit Vista Home Premium.  I have disabled UAC for short time (just to stop and restart).  Immediately, Windows Services has problems and my services files seem to suffer (fixit would not fixit).  He could have a latent virus that only suspended in no time I had disabled UAC?  I run the computer as an administrator, which I now realize is a problem.  I have a firewall and protection ESET and had all updates until two days ago, if that's any help.

  Also note: BITS of problems that seem to be linked to the system events to COM + service problem - she won't start - error 230: the pipe state is invalid.

  1. http://support.microsoft.com/kb/956706

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

  2. http://support.microsoft.com/kb/910337
  If the fixit does not work in the article, read the article to other troubleshooting suggestions.

  PS - repair tool: http://www.microsoft.com/en-au/download/details.aspx?id=7997 (64-bit)

• Windows dvd maker problem: I hear but not image using windows DVD maker.

  I can hear but not image using windows DVD maker. A few obvious reasons? It's strange because it used to work and now a few months later it does not. The image is there in the start menu of the main menu, just before you press play it starts to play sound with no photos after I press play. Please help, steve gratefully.

  original title:
  Windows dvd maker problem

  Maybe the part "What to do if you have questions" of the following
  article would offer some ideas.

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker