Resize raw Images? Need help!

Similar Questions

• RAW IMAGE EDITING - help required

  Please can someone help me with this.

  I look at my RAW images in the organizer and then I use the tap EDIT to go to the editing section of RAW IMAGE with the image that I want to change.

  After I edited the image - I propose to MODIFY the image by hand of the screen and then save as a Jpeg file in another folder.

  The problem I have is when I go back then to the Organizer, I can not open the unreleased original RAW image once again, don't know why this is?

  Although I see a little Touboul-nail image, it opens but continues to research.

  Can someone tell me what I am doing wrong?

  Thanks in advance

  DJ-that's what I don't understand. How can the photo was moved in all the other photos are still there? This happens only in the photos that I am editing and recording with a different name

  Original photos will always have the same original name with a. Extension of RAW and should remain in the same file. I use the option "Save as" to save as Jpeg extension.

  They do not have a question mark on them but rather the icon "Edit" the "duplex of a box with a brush' in there.

• Z Index, overlay images, need help (crazy!)

  Need help on overlay images. As you can see, the "polaroid" a band on it - I want this band to overlap the menu bar.

  

  The menu bar is a Graphic (there is a slight slope for her) and above it are the real menu graphics.  If I remove the menu graphics, photography rides very well.  But if I insert the menu chart, they are on top of the polaroid.  Thanks in advance for any help you can provide.

  Gary

  Here is the code for the page:

  SanDiegoHomegrown.com < h1 > < / h1 >

  < img src = "images/menuBar.gif" / > "

  < ul id = "menu bar" >
  < li = 'listen' id > < a href = "songs.html" > listen < /a > < /li > ""
  < id li = "submit" > < a href = "submit.html" > submit songs < /a > < /li > ""
  < li id = "seals" > < a href = "seals.html" > help < /a > < /li > seals ' "
  < li = 'about' id > < a href = "about.html" > Our Story? ' " < /a > < /li >
  < li = 'sponsors' id > < a href = "sponsors.html" > Sponsors < /a > < /li > ""
  < /ul >

  
  < div id = "polaroid" >
  < img src = "images/band2_polaroid.png" width = "280" height = "354" / > "
  < / div > <! - polaroid - >

  Here's the CSS:

  {#polaroid}
  height: 354px;
  Width: 280px;
  padding-left: 50px;
  margin-top:-40px;
  }
  {#menuBar}
  height: 30px;
  Width: 960px;
  padding: 0px;
  do-family: 'Courier New', Courier, monospace;
  list-style-type: none;
  position: absolute;
  display: block;
  background-repeat: no-repeat;
  margin-top:-30px;
  }

  #menuBar a {}
  Width: 175px;
  display: inline-block;
  color: #2F3032;
  text-align: left;
  vertical-align: 0%;
  margin: 0px;
  list-style-type: none;
  float: left;
  height: 35px;
  padding-top: 0px;
  padding-right: 0px;
  padding-bottom: 0px;
  padding-left: 10px;
  text-indent:-9999px;
  }

  {#menuBar #listen
  background-repeat: no-repeat;
  position: absolute;
  background-image: url(images/titles/listen_bar_orig.gif);
  }

  {#menuBar #submit}
  background-image: url(images/titles/submit_bar_orig.gif);
  background-repeat: no-repeat;
  position: absolute;
  margin left: 150px;
  Width: 200px;
  z-index: 1;
  }

  {#menuBar #seals}
  background-image: url(images/titles/seals_bar_orig.gif);
  background-repeat: no-repeat;
  position: absolute;
  margin left: 375px;
  Width: 225px;
  }

  {#menuBar #about}
  background-image: url(images/titles/about_bar_orig.gif);
  background-repeat: no-repeat;
  position: absolute;
  margin left: 625px;
  }

  {#menuBar #sponsors}
  background-image: url(images/titles/sponsor_bar_orig.gif);
  background-repeat: no-repeat;
  position: absolute;
  margin left: 800px;
  }

  Auggh, just figured it out.  Polaroid should be relative positioning!

• CS4: Resize raw images and maintain the aspect ratio

  I have a few images in full HD 1920 x 1088 or what it is, and I need to put it in a film where everything is in the resolution 1040 x 584, is it possible to reduce the resolution while keeping the proportions? All files are. MOV that I like to keep, but if it's the right size. AVI, that's fine too.

  When I try to export a single clip on first, the aspect ratio is lost and I've tried several programs of video conversion in the last two days, none worked for various reasons, the resolution that I needed was not available, would not work the file after conversion, first does not recognize the file, the aspect ratio has been lost etc.

  Can someone help me out here please?

  Use the option to scale the motion effect.

• grid enabled on each image, need help to turn off please, uughhhh

  I have a few active how the function of the grid (Ctrl-h) on EACH image, I opened.  I need to disbale the grid manually for each photo by pressing control-H.  It is listed under 'extras' as well.  Please help me to disable this permanentely so I can't do every time!  Thanks in advance!

  Tracey

  See-> see the--> grid

• Upgrade to ESXi 6.0 U1 via provided of images, need help.

  Hello

  I want to improve my vSphere of 5.1 to 6.0, I'm at the point where I need to improve my ESXi hosts to 6.0.

  I have the possibility of using Dell released images ESXi or VMware official images. I read on a few blogs which they suggest that we use specific Dell because they may contain more updated drivers... Ok.

  What about when it comes to patch the ESXi hosts? Once I have installed Dell ESXi image, can I apply critical patches of host to the hypervisor, ESXi that appear in my Update Manager? Those who come from VMware... or what to do in this case?

  Thank you.

  Hello

  After you install ESXi 6 CD of Dell, you can apply patches critical and non-critical by using the Update Manager.

  Who will update your ESXi host for later.

  Thank you

  JAS

• Construction of several slides/images - need help!

  Hello, I have only recently started to learn AS3 and have been unable to accomplish what I consider one of the most simplest tasks, create multiple images/slides. In fact, I was unable to conclude to the existence of what I consider to be a core function.

  I want to set up multiple pages, with a 'go to the next page button. For example:

  Executives Dias/1
  Go to the next slide button

  Now, when the user clicks the next button slide reach I would like the following to appear...

  Slide/Frame2
  Go to the previous slide, the button

  Noting that I don't want the scripts of the first frame/slide or objects are present or active on the second picture/slide.

  Thanks for the help.

  on your first image place a next button and previous button (for example, next_btn and prev_btn).  expand the layer that contains both on the scenario you want to act as a slide show.

  Create a new layer actions and add the following script:

  Stop();

  next_btn.addEventListener (MouseEvent.Click, nextF);

  prev_btn.addEventListener (MouseEvent.Click, prevF);

  buttonVisF();

  function nextF(e:MouseEvent):void {}

  nextFrame();

  }

  function prevF(e:MouseEvent):void {}

  prevFrame();

  }

  function buttonVisF (): void {}

  next_btn.visible = prev_btn. Visible = false;

  {if(this.currentFrame>1)}

  prev_btn. Visible = true;

  }

  If (this.currentFrame<>

  next_btn. Visible = true;

  }

  }

• Cannot open RAW images in Photoshop

  I bought a new computer. It runs on 64-bit. I have CS4. Since the upload on my computer, I can not open RAW images. I downloaded the latest updates.

  I have been using the 32-bit photoshop because I couldn't get my NIK filters to work in 64-bit. But I can't open one of my RAW images.  I can not open them in either 32 or 64-bit.

  I have the version 5.0.0.178 of Camera Raw.  I only know this because I see sub "in regard to spin... Camera Raw.  I can't find any filter to camera raw in adobe/plug-ins in a photoshop version. I have a huge photoshoot tomorrow. I NEED to open RAW images.  Help!  Regular support is declining for the next few days.

  If you look at this list: http://kb2.adobe.com/cps/407/kb407111.html

  You can see you need Adobe Camera Raw 4.6 or later.

  As Chris says, update or the another maually from here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4681

  Or use the update of the help of the PS.

• Adobe Bridge CS6 does not recognize the Raw Images

  CS6 Adobe Bridge will not open raw Images from the Nikon D750? !! It will open JPEG, not Raw images. Help!

  Gretchen

  Hi Gretchen,

  Can you try to update on the last CC 2015 bridge and check updated media for Raw files.

  You can continue to have Bridge CS6 by updating to the CC 2015 bridge. Be sure to uncheck the option "Uninstall Previous version" under Advanced option during the installation of bridge CC 2015.

  Thank you

  Deepak Gupta

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• PS Newb needs help with resizing the image and print several sheet

  Hi, I am using PS CS3 to resize an image, I have so I can print to use as a map for a miniatures game.  I have no problem of scaling of the image to the appropriate size, but I can't understand how to print multiple image 8.5 x 11 sheets.  I thought I saw an option for such a procedure before, but maybe it was in another editing program.  If anyone has any ideas on how I could do this I would really appreciate hearing about them.  Thank you!

  Illustrator and InDesign are tiled printing, like CorelDraw. Photoshop, this title is not, but may be a few script for this. In your case, the simplest solution would be to save the file in PDF format and have Acrobat print a tiled (Page scaling of parameter in Acro print dialog box). You just need to make sure that your page corresponds to several pages. Unliek AI and ID, Acro chop only stuff based on standard paper sizes...

  Mylenium

• Need help with date EXIF for raw images

  I have a little more than 100 images (taken by 2nd shooter) EXIF (JPEG and raw) who have the wrong date.  They were taken with a 2nd camera which was extinguished by + 15hrs min 57.

  There are many programs that will easily edit the EXIF date/time on JPEGs, but they do not work with raw images.

  I read that Lightroom can compensate for incorrect dates on import, but after searching, I can't find any information on how to do it.  Can someone please?

  In library view, go to the section metadata/change the Capture time. You can pass the time by a number of hours, that would get you some 3 minutes anyway. Under Publishing/catalogue of the parameters in the metadata tab, you can choose to write the date and time changes raw int (check box below) files.

• Need help with a script customized for processing in Photoshop CS4 of images in batches. Really grateful for the help thereby.

  Hi people.

  So I have a boatload of pictures that I have to deal with as I'm moving off Ebay and open my own online store and the images that I have on Ebay, although excellent quality are not square, and unfortunately, the model that I use in Wordpress requires square photos.

  Basically, what I need is a script that I can use in batch mode, which will focus on the size of the image and change the canvas size to be square corresponding to the current long image side. Resize the image to 1600 square pixels and finally save for web in JPEG quality 60.

  Normally I would muddle my way through this trying to teach myself but I already do so much with this new project that I can't afford to pay developers for help that I would really appreciate if someone could help me with this script. I use Photoshop CS4 if it made a difference.

  Thanks much for any help you can offer.

  See you soon,.

  J

  A simple gesture can do that. What you need to do is that the action of lot.   With the help of Photoshop Image Processor script.  The Action is a two-step

  N ° 1). File menu > automate > fit Image.  In the dialog box Image Fit you assign Width and Height 1600 pixels.

  Step 2.) Menu Image > canvas size.  In the canvas size dialog box, you assign Width and Height 1600 Pixels.

  Record the action in some action with a name like 1600PxSquare

  Then use the file menu to Photoshop > Scripts > image processor. In the dialog to the Image Processor script. Select your image source folder. Set where you want your jpeg images. Set it to save jpeg files quality 6.  Set it to include your 1600PxSquare action.

  Step adjustment image resize your image to fit in a 1600 x 1600 pixels are while keeping image proportions of images. Portrait image will be high 1600px and landscape image will be 1600px wide.  The step size canvas will add the canvas to make the place of the image.  Portraits will have a border on the left and right images of landscape will be confined to the op and downs.

• I am a user of Photoshop CS5.  I have a whole new camera Panasonic DMC-ZS50.  Help Photoshop says that this camera RAW images are supported.  But my Photoshop CS5 can not open these RAW files.  What should I do?

  I am a user of Photoshop CS5.  I have a whole new camera Panasonic DMC-ZS50.  Help Photoshop says that this camera RAW images are taken in charge by Photoshop.  But I can't open these RAW images in CS5.  What should I do?

  This device requires Camera Raw 8.8/9.0, which only CS6 or PS CC can handle. With CS5, you need to use the free DNG Converter.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh

• Photoshop does not open Raw images with my new camera Canon 6 d help! I use Photoshop CS5 extended version.

  Hello

  I got a new camera and Photoshop and Lightroom will not open Raw images with my new camera Canon 6 d help! I use Photoshop CS5 extended version. and Lightroom 3

  Good and bad news:

  The bad news is you need CS6 or later version to open 6 d RAWs. (The 6 d did not support until Camera Raw 7.37.0 was created in CS6;) You can choose to upgrade (I recommend CS6 to jump and go straight to 2014 CC for $10 / month) * GOLD *...

  .. the good new is that the DNG Converter can help you convert your RAWs in DNG for CS5 and Lightroom 3.