resizing Panel prohibiting under minimum?

Similar Questions

• Why do I not option preserve under minimum filter?

  Why do I not option preserve under minimum filter?

  It's better, CS6 does not have this feature. He said in one of the CC versions. The only option you have is the square type, rather than the round type for this filter.

• Width of the resizable Panel boot

  Hello

  I have a CS Extension on CS5.5 Billboard. On new installations of InDesign, when the Panel is launched, it shows the Panel like a small box grey and must be resized to display the Panel entirely. I put the min width and height to the Panel. If I set the min width in the manifest, my slab is not resizable. I would like a resizable Panel, but must open with a width and height when you first launch. Right now, I have to resize the first time and once resized, the sticks of width and height in InDesign. The viscosity is good, but the sound is not intuitive for most users to resize the Panel for the first time. Is there another place where I have to change the settings? I tried to set the width and height after the creationComplete event too but that doesn't seem to help.

  Thank you

  Hello

  You must set 'Default height' and 'Default' in the manifest (the User Interface Section).  The width and height of the Flex Application should be registered.  This should open your Panel in the correct size and also still be resizable.

  concerning

  b.

• InDesign CC resize Panel transformation is not resize elements of mask

  Hi Guyz,

  I was faced with this issue of many versions of Indesign and don't know why it is not yet resolved.

  I have a box or a circle in which I have items that are hidden inside this circle or box. Then, when I try to resize by transform Panel (not by the transformation tool), it does not resize its hidden objects. I have tried different combinations of keys, also tried "transformations are total" and other options there, but nothing has worked.

  I really need because to resize the number of objects in a particular size, the transformation Panel is the fastest way to achieve perfection.

  Prospects for a quick solution.

  Thank you

  Here is another method that should work: use the fields scaling (width and height) in the control panel. Fields scaling ladder together both the framework and the content.

  By default, these two fields assumes that the values are entered as a percentage, but you can also enter the absolute dimensions if you include the units of measure (you can do this to enter numbers in different units in a number ID field).

• Panel went under the toolbar

  I was working on a website when I moved the Panel downwards, and it happened under the windows 8.1 toolbar. I can't drag it off the toolbar because it's al the way under (see screenshot). On the screen, at the bottom of the toolbar, the Panel is there. I need help trying to get him out or reset it somehow.

  Hello

  You can increase the resolution of the screen or hide the taskbar so that you can make signs appear again.

  On the taskbar > properties > Autohide > uncheck lock taskbar.

  Once the taskbar is hidden, you can click on the Panel.

  Thank you

  Sanjit

• How to resize panels (very) wide angle?

  Hi all!

  I have a problem in Photoshop CS5 (Windows version v12.1 x 64).

  My screen resolution is 1680 x 1080, but almost all of the 'extra' screen space is plagued by wide panels.  I can't adjust the width, it is locked for this extra wide look (see photo below). For example, my actions panel is two columns wide. It would give me a lot more space on the screen if I could have only one column.

  P. S.

  I understand that some panels are wider by default and therefore affects other panels if they are grouped together, but they cannot be resized even when separated.

  Best regards.

  

  I think it's just a case of something to do with the version of cs5 help.

  If the word in the language uses much longer than the English equivalent names.

  In any case, it's the only thing I can think of.

  Here is a picture of cs5 with screen resolution 1024 x 768 on my windows machine 8 value

  

• Resize a window under Boot Camp

  Using Boot Camp with 10 WINDOWS on an iMAC /El Capitan, I can't resize or minimize windows. The window is frozen full screen

  One advise? Thank you

  This happens for all Applications, or just a specific?

• With the help of vertical panels. installs under reserve, etc., all the way to the right pane may not recover the message pane?

  In vertical view, I wanted to broaden the scope of name of spammers, so I moved border right pane #2 all the way to the right, which fell part msg out of the screen. I can't click on the pane, I moved to the right to bring back the msg on the display pane. I've tried view extends all the way through my two monitors - still could not click on #2 border to bring back the msg pane. Tried to restart and reinstall TB nothing helps. Tried other options to display without help.

  Press F8.

• How to hide Control Panel tasks under vista Works spreadsheet

  How to hide the task pane on the vista works worksheet?

  Answer: task selection pane on the drop-down "display".

• Delay in resizing of front panel

  Hello

  I develop GUI which needs to look nice and the user will have the option to resize. Since the ladder under the window property fails, I wanted to use the resize Panel event.

  But there is delay - controll is resized some time after I resize the front panel and that seems bad. When I look at the list of window or error of project it will resize instantly.

  Why I can't get this result in Labview?

  I could always sign size leash read say every 10ms and calculate the size of ontrolls on this basis, but is there best option by using this resize event Panel?

  It should be more or less obvious that this parameter means when used.  If you set a control to fit the pane and then resize this component, it does not wait for the mouse to start resizing it it will resize for each pixel the mouse movement.

• Resizeing standard panel using borders

  Hey all,.

  You do not take too literally of "Panel". I'm pretty new to flex. I hope it is something simple, I forgot.

  I would like to bring a left and right at my request. A tree on the left and various dynamic things on the right. I would like the user to be able to resize the separation between the left and the right in a standard way.

  Almost all the applications we users use allow you to enter a border or a space between the 2 separate panels and resize them. A Panel expands while the other shrinks. It is trivial in c# .NET as a border can be requested and all resizing is done for you. It is literally drag / move. I am trying to find this in Flex if it exists.

  Is there a container that supports automatic resizing of areas or even has a way to apply it in a standardized way? BorderContainer contains no property, I can see to allow resizing, or other containers. Should I expect to literally make a HRule or VRule and hand code to resize panels when you click them (if that's even possible)?

  I'm looking for the best way to contain panels with inner resizability.

  MX:HDividedBox

• Panel locked on screen

  Hello:

  I have a Pavilion laptop 6V6 who suddenly has a problem. On the display panel and under my user name, the word "locked" is now present. How can I get rid of him?

  Thanks in advance for your replies.

  Hello:

  After restarting the laptop this afternoon, the wording 'locked' under my user name is gone,

  I guess my problem is solved.

  Thanks for the quick response.

  

• PictureScrollField + 6.0 = > resizing of images

  Hi everyone, it's me again.

  I have a compiled application under 5.0 that great workd with touch device like storm (5.0), but which has some leaks when I start under 6.0

  I have a pictureScrollField that hold virtually all the screen, less than 5.0, when an image is smaller that the space has allowed the pictureScrollField, then it's a painting just like that, centered on the screen but not resized.

  Under device 6.0 or simulation (torch), the bitmap are resized every time.

  I checked the PictureScrollField 5.0 documentation which stated that "image not are NOT resized.

  Any clue?

  I have found no solution so I started to create new Bitmap from the one i dl.

  Like this:

  Bitmap resizedBitmap = new Bitmap(360,480);
  Graphics g = Graphics.create(resizedBitmap);
  g.setColor(Color.BLACK);
  g.fillRect(0, 0, 360, 480); bitmap.scaleInto(resizedBitmap, Bitmap.FILTER_BILINEAR, Bitmap.SCALE_TO_FIT);
  

• String question ScriptUI Panel resources

  I have created a small tool to use to keep my projects organized and want to create a drop down list that will contain the broad list of rendering templates I created. At the present time, for the trial (since I'm new on ExtendScript), I just trying to transmit a pre-created table of a function so that I can build in the code to display rendering models later.

  {

  function joshPipe (thisObj) {}

  function joshPipe_buildUI (thisObj) {}

  var pipePanel = (thisObj instanceof Panel)? thisObj: new window ("palette", "Josh Pipeline", undefined, {resizable: true} ");

  var rsdPath = "workspace has not loaded ';

  var presetList = ["make model 1', 'make model 2', 'make model 3'];

  GetExtension() {} function

  return 'project manager ';

  }

  function getPresets() {}

  List = ['make model 1', 'make model 2', 'make model 3'];

  back list;

  }

  queueTab = ' group {orientation: 'column', alignment: 'fill', alignChildren:------['fill ', ' fill'],} ".

  Group0: group {orientation: 'column', alignChildren: 'fill'------}

  loadPipeButton: button {text: 'Installation work space'}, \

  },\

  Group1: Panel {orientation: 'row', text: 'Render Settings', alignChildren: ["fill", "fill"],------}

  group1_1: group {orientation: 'column', alignChildren: 'left',------}

  fullRadioButton: RadioButton {text: 'Full (delivery)'}, \

  halfRadioButton: RadioButton {text: "half (review)"},

  },\

  group1_2: group {orientation: 'column', alignment: 'just'------}

  renderTemplateDD: DropDownList {properties: {items: ['model 1', '2 ', 'model 3']}}, \

  },\

  },\

  Group 2: group {orientation: 'column', alignChildren: 'fill'------}

  rsdString: StaticText {multiline: 'true', text: ' "+ rsdPath +" "},

  renderButton: button {text: "Making Setup",},

  },\

  }}";

  pipePanel.grp = pipePanel.add (queueTab);

  var loadPipeCtrl = pipePanel.grp.group0.loadPipeButton;

  var fullRenderSelCtrl = pipePanel.grp.group1.group1_1.fullRadioButton;

  var halfRenderSelCtrl = pipePanel.grp.group1.group1_1.halfRadioButton;

  var renderTemplateDDCtrl = pipePanel.grp.group1.group1_2.renderTemplateDD;

  var rsdStringCtrl = pipePanel.grp.group2.rsdString;

  var renderButtonCtrl = pipePanel.grp.group2.renderButton;

  loadPipeCtrl.onClick = function() {}

  rsdPath = GetExtension();

  rsdStringCtrl.text = rsdPath;

  renderTemplateDDCtrl.item [0] = 'yo momma';

  }

  renderButtonCtrl.onClick = function() {}

  rsdStringCtrl.text = 'unloaded project. "

  }

  Default values

  pipePanel.grp.group1.group1_2.renderTemplateDD.selection = 0;

  size of the window

  pipePanel.layout.layout (true);

  pipePanel.grp.minimumSize = pipePanel.grp.size;

  resize panels

  pipePanel.layout.resize ();

  pipePanel.onResizing = pipePanel.onResize = function() {this.layout.resize ()};

  Return pipePanel;     Returns the final result of pipePanel

  }

  var pipeScriptPal = joshPipe_buildUI (thisObj);

  If ((pipeScriptPal! = null) & & (pipeScriptPal instanceof window)) {}

  pipeScriptPal.center ();

  pipeScriptPal.show ();

  }

  }

  joshPipe (this);

  }

  The problem is that want this tool to be a sign that I can anchor. Near as I can tell (using the Extendscript of David Torno series as my guide) I have to read in the user interface and its options initially as a string resource, and I cannot understand how to operate. Any suggestions?

  It dawned on me that I needed to actually get a string with a different function, rather than a table.

  var presetList = ["make model 1', 'make model 2", "make model 3", "make model 4"];

  var presetString = getPresets();

  function getPresets() {}

  list = presetList;

  tempString = "["; ".

  for (var i = 0; i)< list.length;="">

  tempString = tempString.concat("'",list[i],"'");

  If (i<>

  tempString = tempString.concat(",");

  }

  }

  tempString = tempString.concat("]");

  Return tempString;

  }

  ...

  group1_2: group {orientation: 'column', alignment: 'just'------}

  renderTemplateDD: DropDownList {properties: {elements: "+ presetString +"}},

• How resize in batches and still maintain the ratio of picture?

  Hey all,.

  I'm working on a project about 6000 photos. And much more

  
  

  in the future. I need to be able to SIZE in LOT these since

  
  

  There is so much, but ALSO keep a ratio from 4:3 to the size

  
  

  800 x 600. I know I can batch change these but he smushes them

  
  

  up to 800 x 600. I need cut and, if necessary, then cut the

  
  

  real photo quality is not compromised, but retains all the

  
  

  of shapes and sizes.

  HELP!!!!!!!!!!!!!!!!
  Thank you very much!!!

  AFTER a PHOTO WORRIED LOADER !

  In the file menu in Photoshop Elements is a tool called processing of multiple files.

  On the resizing Panel, set the width or height and keep the proportions force locked.

  You can set this tool to the process and the entire folder of photos in a few clicks. You can even set to save your photos resized to a new folder so that you maintain the full definition of original photos.