Warning of the NAC certiicate

Similar Questions

• Disable the warning to the top bar "flash is dangerous and has been blocked.

  I find it very annoying that each site Web with flash content firefox displays a warning, in the form of an additional bar below the address bar. I already have flash plugin 'ask to activate '. I know flash security issues after the Hacking Team hack, and I absolutely want to keep it off unless I decide, I hope that the Web site. It's something that I already know (because I put firefox like this) however I don't see the need to bother with an additional bar, just to tell me that the flash is disabled. Is it possible to remove it, or should I file a bug report? I am not prepared to disable the blocklist plugin or anything by lowering the security.

  Hi paul, you could try this addon: https://addons.mozilla.org/firefox/addon/hide-plugin-notifications/

• I get a warning about the use of an older version, even after the installation of v24.

  Several sites (including Mozilla) Internet gives me a warning about the use of an older version. I am currently on v24 and when I take the advice to be updated simply re - installed v24 yet again, but the expired message does not disappear!

  Thanks report, deleting the file user.js wasn't the first step - please also resets the user agent parameters as described in https://support.mozilla.org/en-US/kb/websites-say-firefox-outdated-or-incompatible#w_firefox-is-showing-the-wrong-user-agent and restart the browser.

• Cannot delete 'alert warning' in the Safari iPad iOS 9.3.1 Air app

  I have a 'alert warning to the Virus' that I can't delete my Safari app. It seems to hang out in the list at the bottom of the cross-tab screen which we can access by clicking the several page icon at the top right of the Safari icon window.

  I tried all of the suggestions: removal of Web site data, blocking cookies, disable Javascript, display resetting, etc. I always put the question when I open Safari (screenshot attached), and two additional, seemingly legitimate pages on the list at the bottom also do not seem to want to leave. If I press them, they open a tab. They are not in my bookmarks, Favorites or history (which I also deleted). I'm at the end of my options, it seems, and I hope someone here can help you. The only thing I have yet to try is delete the app and re-install. Thanks for the tips!

  

  Have you tried double pressing the "home" button and make drag all Safari Windows? Safari then clear cache (settings - safari - clear history...) and back in Safari.

• Get a warning from the blue screen on my Satellite L300

  Lately, I've been making a warning of the blue screen on my system, and then it restarts automatically. I copied the info.
  Any help would be appreciated! I don't know what it all means. :))

  Product
  Windows

  Problem
  Stop unexpectedly

  Date
  25/10/2009 09:09

  Status
  Report sent

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 3081

  Files helping to describe the problem (some files may be is no longer available)
  Mini102409 - 01.dmp
  SysData. XML
  Version.txt

  Additional information about the problem
  BCCode: 9f
  BCP1: 00000003
  BCP2: 84683030
  BCP3: 86AA6030
  BCP4: 85B 15008
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: 46689d9f-cdf1-40e7-a52c-7380a7ec7727

  Try:

  (1) test the RAM. www.memtest.org (CD or Bootable floppy)
  (2) use a system restore to return to a previous state.

• Is this an official warning of the virus?

  Today, I think I was victim of a virus.

  I received the message "http :// apple." com - safetynotice [.] com'

  As I have never had this before: is it an official warning of the virus?

  

  No.; It's a scam. Choose force quit from the Apple menu, close Safari and then run it with the SHIFT key is pressed. If the message reappears, disconnect the computer from the Internet and close the tab Popup came.

  (137419)

• Has received a warning about the following: the file wmplayer.exe, version no. 11.0.5721.5145 where 12.0.7601.17514 was expected.

  Original title: received a warning about the following: the file wmplayer.exe, version no. 11.0.5721.5145 where 12.0.7601.17514 was expected. How to find and update the file, please.

  Has received a warning about the following: the file wmplayer.exe, version no. 11.0.5721.5145 where 12.0.7601.17514 was expected. How to find and update the file, please.

  You try to install Windows Media Player 11?

  Try to run a scan of the file system to see if he can fix it: http://support.microsoft.com/kb/929833

  You can also try a system restore: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

• I get a warning at the bottom of the page that warns against programming cross-how can I turn off this label

  Original title: cross stitching
  I get a warning at the bottom of the page that warns of a volleyball how the hell this label

  montanacowgirl,

  Do you mean the scripts? If so, please see the following:

  http://Windows.Microsoft.com/en-us/Windows7/how-does-Internet-Explorer-help-protect-me-from-cross-site-scripting-attacks

• No warning when the volume level

  Hello

  I just bought my Xperia Z2 a week ago and I am completely satisfied with the phone. Just one thing that bothers me is that, until now, it will display the warning when rasining top music volume level using earphones, but today it suddenly stopped showing this warning. I'm still using the headphones supplied with the phone, and I have not changed any setting for her nor disabled somehow.

  Something might be wrong with my headphones? Like them being does not correctly detected or something. I don't know if it's my imagination or not, but since the warning stopped the sound quality seems to have gone down.

  In the end, I did the factory reset and that seems to have solved the problem.

• Version of the NAC

  Dear,

  Can what version of the NAC I install VMware?

  Can anyone help please with the above query.

  Thank you

  NAC is not supported on Vmware. Yet people have managed to install NAC4.1 on Vmware, but newer version do not work.

  There is a new product called Cisco ISE, which will eventually replace the NAC. Cisco ISE can be installed on Vmware.

• Ports of the NAC

  Hello Experts,

  Have some questions that came across while doing work of the NAC at one of our subsidiaries. If there is some user ports which are not selected for the profile of the NAC, is it possible (except physical control on the cell phone of the user by allowing all ports & audit) which can be used to track the paths of users without mail for NAC.

  Second, if the user of the NAC port is manually on the vlan user (rather than quarantine or vlan temporary), which is the correct order for that.

  the user on NAC field must be typed manually to vlan user or port profile should try not controlled followed by rebound port & update.

  Apprecite all help, thank you.

  Hello

  See online:

  If there is some user ports which are not selected for the profile of the NAC, is it possible (except physical control on the cell phone of the user by allowing all ports & audit) which can be used to track the paths of users without mail for NAC.

  [Tiago] On the graphical interface of CAM, you can check which controlled uncontrolled ports are. It is the only place where ports can be determined to be managed/no managed.

  Second, if the user of the NAC port is manually on the vlan user (rather than quarantine or vlan temporary), which is the correct order for that.

  the user on NAC field must be typed manually to vlan user or port profile should try not controlled followed by rebound port & update.

  [Tiago] When you perform the configuration of the switch, the switchports can be put on the vlan user or default access vlan. It depends on the port profile settings that you have configured. By default, when a port is managed on the basis, if a client connects, an SNMP trap is sent to the CAM. The CAM check whether the machine is certified or not (check the mac address). If the machine is not certified cam becomes the vlan the authenticated vlan configured on the port profile.

  So, whenever you connect a PC to a switchport, CAM evaluates what is the vlan correct the PC to start and change it accordingly.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Support of the NAC Profiler address & ip

  Hello

  I have a layer 3 OOB NAC Profiler deployment and I am trying Profiler some IP phones from a remote location by using the statement of helper-ip address on the interface on the remote router. The problem is that the remote router acts as a dhcp server for the vlan voice and fact not forword DHCP discover for Colectionneurs of the NAC, and I can't phone ip profile. Do you know a way (an order of configuration on the router) to forword the dhcp even though the router acts as a DHCP server for this vlan?

  Thank you

  Victor

  Hi Victor,

  To do this... You must add a SVI for the voice VLAN on the switch behind the router, and then add the IP helper on the new interface VLAN voice.

  -Hassan

• Actual gateway IP process to strip the NAC

  Hi all

  I did a lot of research, and I can not find good answers to some of my questions. All the big questions are answered for out-of-band configuration, but I find that it is assumed that this understanding in the Strip is taken for granted lol... I guess I'm slow = P

  1. How does the gateway IP In-band real?
  2. What is the point of the 30 subnets?
  3. Are there any access/auth pairs VLAN configurations in the band?
  4. How does quarantine work?
  5. I read that the NAC server cannot send traffic on untrusted port to a VIRTUAL LAN and that you are not allowed to trunk port. This means that there is no support for several VLAN reliable, mapped to a single server at the NAC?
  6. Can you do role with configurations mapping in the band?

  Assistance for all or part of these questions would be GREATLY appreciated!

  Thank you a lot =]

  ~ Xavier.

  Hi Xavier,.

  I'll try to answer your questions

  1. How does the Strip Real-IP Gateway?

  The CASE works in routed mode, if you have different IP addresses (on different subnets) on interfaces approved and unapproved. Because the CASE does not support routing protocols, routing must be configured through static routes

  2. What is the point of the 30 subnets?

  The idea is to have small subnets for your customers so that with this config IP customers in authentication VLAN should through the CASE even to talk to other clients on the same subnet L2.

  Click here for an explanation:

  http://www.Cisco.com/en/us/docs/security/NAC/appliance/configuration_guide/47/CAs/s_dhcp.html#wp1057889

  3 is there access/auth pairs VLAN configurations in the band?

  If you ask if there is mapping VLAN, then the answer is NO, as the purpose of the VLAN mapping must * bridge * traffic between approved and unapproved mapped VLAN, but in real-IP the L3 routing traffic CASES.

  4. How does quarantine work?

  When a client is quarantined, it works the same way as OOB, as in this phase, the client is always online to the CAs.

  So the concept is assigned to the CASE by the temporary user or the role of midlife and he applies a traffic policy you've set up temporary or the role of midlife.

  5. I have read that the NAC server cannot send traffic on untrusted port to a VIRTUAL LAN and that you are not allowed to trunk port. This means that there is no support for several VLAN reliable, mapped to a single server at the NAC?

  The restriction of VLAN "single" for Real - IP CASE applies only to the * trust * side. The CASE may be the default gateway for several subnets VLAN / IP on the * rogue * side.

  Configuring addresses VLAN / additional IP on the unreliable side by using the configuration "managed subnet.

  This is mentioned here:

  http://www.Cisco.com/en/us/docs/security/NAC/appliance/configuration_guide/45/CAs/s_deploy.html#wp1050938

  The clean access server can manage one or more subnets, with its untrusted interface, acting as a gateway for managed subnets. For more information on the setup of managed subnets, see Configuring managed subnets or static routes page 5-26.

  6. can you do role with configurations mapping in the band?

  Yes, you can do it! However, you cannot assign a VLAN as you do in OOB, but you can assign the different level of access based on IP traffic strategies and bandwidth restrictions that you assign the specific role.

  For example, check here for more details:

  http://www.Cisco.com/en/us/docs/security/NAC/appliance/configuration_guide/45/cam/m_users.html#wp1040231

  In a Word, regardless of the use of the band vs OutOfBand:

  -customers are InBand before CAs in CASE detection, authentication, the phases of assessment and remediation of posture.

  The main difference occurs when the user is allowed to access the network and that you run the IB role assignment and OOB but... :

  -in customer traffic keeps on inline flowing to the IB CAs, so you can apply different access policies (ACL) and control of bandwidth depending on the role policies (but you cannot assign a VLAN);

  -in OOB, customer traffic bypasses the CASE once it is authorized: in this case, you can apply different VLAN but (given that the CASE is no longer along the way) you cannot apply ACL and/or ensuring the policy in this case.

  I hope that answers your questions.

  Kind regards

  Federico

  --
  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• Fight against exclusion the NAC mac

  Experts, assuming that few users are now authenticate & viz cisco NAC network access, they be filtered from the NAC to exclude the posture of NAC will be they be disconnected from the network & reconnected since they were connected & now are going to be ignorant of the NAC.

  How it works in this case. users will be disconnected for that to be effective, or will they be disconnected by force before it takes effect.

  Thanks to you all.

  Hello

  There is a port bouncing feature Cisco NAC that accomplishes this task for you. But it depends on your deployment mode, it is not required for each of them. Please see this link:

  http://www.Cisco.com/en/us/docs/security/NAC/appliance/configuration_guide/48/cam/m_oob.html

  Please indicate if you will find the entrance helpul. Thank you

  Farrukh

• Activation of the NAC HA puts several hosts and ASA with processor clocked at 100%

  I installed a NAC Manager and a NAC server in OOB without any problems, but when I configured the AP (high availability) with another server, my ASA and several guests in my network started work ant 100% of the cpu.

  I tried to configure each interface of the NAC on a single DMZ and the problem stops there.

  -That someone had this problem (NAC version 4.7)

  TKX

  Miguel Amaral

  Hello Miguel.

  When I started a NAC InBand HA solution I had a similar problem that I solved the heart rate HA configuration to use ETH0 just instead use ETH0 and ETH1.

  Best regards

  Luciano Carvalho