Resizing the Clips.

Similar Questions

• With the help of the volume envelope of the clip to amplify rather than mitigate them

  Hello world

  I tried to modify the envelope of volume of a clip in multitrack view, and I realized that the envelope volume really only allows of * mitigate * the volume of a clip throughout its duration, not * amplify * it. In other words, you can only add points on the envelope that are * sub * la + 0 dB line, which reduces the volume of so - many dB.

  Is there a way also vary the volume of a clip in the other direction, that is to amplify, in multitrack view?

  Thanks a lot for your suggestions!

  Probably because it's the limit defined by Adobe for this operation. If you need more than that, then probably you increase permanently the level of the file in the editing view.

  It seems, however, a workaround solution. If you have resized the clip to the maximum envelope, you right click and open the properties of the Clip, you will see that hearing has set the Volume of the Clip on the max of + 15dB. If you reset the fader on the 0 level, you can then go and resize the envelopes again. This can allow you to get the gain, you need. But, as mentioned above, if your levels are too low, in the first place, I would increase the level of the file permanently in the edit view.

• Is it possible to resize the image size for all clips at once?

  I have a video of music finished and when I export there is a black box around the video. I tried to put the exported file back in first and by resizing the area program, but when I exported the video became unstable. I could resize each item individually in the first original file, but it would obviously take a lot of time, so I was wondering if there is a way to select them all and resizing, or even another way to cut out the black bars (trying to size for youtube). Thanks for any help, it is much appreciated.

  -Josh

  Josh,

  Welcome to the forum.

  The best way to handle things is to choose a pre-defined sequence that matches your footage source of the layer at 100%.

  In light of the where you are now, you can go to your first Clip and adjust the fixed effect > Motion > adapted for her greatness. Then, Rt-click on it, choosing the copy. Now select all the other Clips (Lasso with the slider will work) and then Rt click, choose the attributes of the dough.

  CS5 offers a new tool to configure your sequence. Import your footage source of the layer, then select it in the project Panel, drag it to the new icon to get a corresponding sequence.

  Good luck

  Hunt

• To resize a clip using AS3 (in my game, it's the life bar)

  S O L V E D thanks.

  In addition to my document class I created classes for the objects in my game.

  One of them is a class of a rectangle that has to reduce during the execution of the timer of my document class.

  So far I managed to change the following (on the other mc) when the timer is in place: alpha value and the position of the clip.

  My code for this class so far:

  {

  import flash.display.MovieClip;

  SerializableAttribute public class TimerMiddle extends MovieClip

  {

  public void TimerMiddle()

  {

  x = 1242;

  y = 300;

  }

  }

  }

  I think that the next step in this class file would make a new public function to manipulate the scalebar timer called TimerMiddle. I want the width remains the same, but the height to decrease as the TimerEvent runs. I made sure that the referance point is at the bottom of the rectangle.

  How can I change the scale of the rectangle to indicate that the life of the player goes down as the time runs? I don't know if I change the height of the vertical bar, scale or it I use interpolation (and how to implement one of the three.)

  What should import into my document class once the best option is chosen?

  Thanks for the help

  Thanks it works now.

  This added to the code

  public function scaleLifeBar (): void

  {

  height = height - 10;

  }

  I think that my timer went to fast to see work before LOL. Coding brings out my stupid inside sometimes.

  Try all three and see which works best.  If something happens too fast, slow down either take smaller steps.

• resize the imovie 10.0.5 Viewer

  IMOVIE 10.0.5 How can I resize the screen "viewer" (the screen that shows the photo or clip I visit) which is on the right side of the screen above the timeline regarding the side left that has photos and clips from my iphoto library. ?

  My goal is to be able to reduce its size so that I can expand the portion of the screen that displays all the photos and clips from my iphoto library, which I use to select those that I want to place in the timeline.   This would make it easier for me to see more photos/videos so I can choose which ones I want to insert into the timeline panel.

  I see a thin vertical black line separating the "viewer" of photos/videos in the library that I use, but I can't 'slide' line one way or another to adjust the sizes between the viewer and the pictures/clips library

  I can adjust the relative size between the upper and lower parts of sunblock, but allows me to see more photos, since it keeps the relative size between the 'observer' and he pictures library.

  Help is appreciated

  You can't adjust the width of the pane showing clips of the event regardless of the observer, but you can do the smaller clips so you can see more of them by clicking the gear icon and moving the "Size of Clip" slider to the left.  Move the slider to zoom to the left can also reduce the length of video clips of long-term:

  

  Geoff.

• How to resize the external .swf files?

  Hello

  THA following the code is to resize the video Clips which are on stage. But how can I resize externally. SWF files? I am adding an external .swf file through Gallery_mc.addChild (loader);

  The following code works very well for resizing of video Clips on stage:

  var myStage:Stage = this.stage;

  myStage.scaleMode = StageScaleMode.NO_SCALE;

  myStage.align = StageAlign.TOP_LEFT;

  function initialDisplay(event:Event):void {}

  var swfWidth:int = myStage.stageWidth;

  var swfHeight:int = myStage.stageHeight;

  Gallery_mc. Width = swfWidth;

  Gallery_mc. Height = swfHeight ;}

  addEventListener (Event:ENTER_FRAME, initialDisplay);

  Help, please.

  Thank you.

  It is not supposed to resize an external swf, unless you load it.  If you load, use a complete listener to resize:

  var loader: Loader = new Loader();

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, f);

  Loader.Load (new URLRequest ("swf1.swf"));

  function f(e:Event):void {}

  addChild (loader);

  Loader.Width = Whatever;

  etc.

  }

• blur changes when I resize a Clip

  In Flash CS3, when I resize a movie clip symbol that has the blur filter applied to it, the amount of blur Exchange. Is there a way around this problem? Thanks much for any help.

  Remove the filter and re-apply after you resize the object.

• How to import the logo into the clip and display it during the full clip

  Hi all

  I use Adobe Premiere Pro CS4.

  I am now a different DVD project that I've done since the time.

  Now, I'll use these them in a commercial of things if I want to add a logo on the clips to keep my rights... etc.

  Here is the situation:-

  (1) the import of the item in Adobe Premiere Pro CS4.

  (2) import the logo image I want to use.

  (3) right click on the video file and click Insert.

  Now, I want to know how to import the image file into the video so it's being there during the full clip?

  I tried several times to import it, but found that it displays seperatey after or before the clip or in the environment I want to be displayed during the entire film.

  Also, it is great when I posted I want to resize it to be in the upper right of the clamp.

  Thank you very much

  Sorry for the bad English.

  has taken more time than I thought... and it's just basic examples... may be refined more...

  with more time and reflection... .but gives you the basic ideas of... read the caches of combat and transparency... etc...

  -----------

  samples
  white background... .with hide by approach
  becomes transparent... letters, Black opaque, translucent gray

  

  transparent background
  black and white letters are shown as is with no cache by approach

  

  transparent background with matte...
  now white letters serve as mask and allow the image through only the white letters

  

• How to resize the image to ImageSnapshot?

  Hey guys... so im taking a picture of a movie clip using ImageSnapshot.captureBitmapData (myClip);

  I need to resize the bitmap data that I'll be back, the size must be 720 X 486

  the code I have is...

  var myClip:MovieClip = event.target as MovieClip;
  
  var imageBitmapData:BitmapData = ImageSnapshot.captureBitmapData(myClip);
  var pngEncode:PNGEncoder = new PNGEncoder();
  var ba:ByteArray = pngEncode.encode(imageBitmapData);
  

  any ideas? I tried to use the matrix.scale, but I guess I did not understand how to use wisely...

  any help is greatly appretiated!

  Thank you

  Hello

  so why sleep going

  This function will just take your display object and return to what you want to spend the final width you need and it works the scaling for you, you could do more complex comparing say the width and the final height to calculate the "best fit" but well...

  David.

  private function scale (content: DisplayObject, width: int): BitmapData

  {

  var scale:Number = width/content.width;

  var BD: BitmapData = new BitmapData(content.width*scale,content.height*scale);

  var mt:Matrix new matrix());

  Mt.Scale (Scale, Scale);

  EDI Draw(Content,MT);

  Return to comics;

  }

• Resize the object

  Hello
  
  I had the problem when resiz video clip. This some info hope someone can help me.
  On the screen of the clip I put the name as "DisplayResult', width = 200, height = 50, x = 100 and y = 1000.
  
  When some button click, DisplayResult having to resize in width = 400, height = 100, he succcess... but the x and y he run of I can already try use script for fixed x and y... it always works. I want the clip on the same position.
  
  Each button I click the size will be 2 of the original x. This my code, is the x, y?
  
  _root. DisplayResult.width = _root. DisplayResult.width * 2
  _root. DisplayResult.height = _root. DisplayResult.Height * 2
  _root. DisplayResult._x = 100
  _root. DisplayResult._y = 1000
  
  can someone tell me what problem happen?
  
  Thank you speding time on my problem.
  
  Kind regards
  MC

  Hi all

  Thank you for spending time on my problem, the problem I already fix. The x, y on screen different when the script.

  Kind regards
  MC

• How can I add a transition without eating in the length of the clip.

  I have a newer iMac with iMovie 10.1.2 and OS 10.11.6.  I would like to add transitions, but they eat in the length of each side of the transition of 2.0 seconds.  Is it possible to add transitions without eating in the length of the clip.  In old iMac with the internal CD, before Apple "upgraded" iMovie, you could add transitions without affecting the duration of the clip.  When a large part of my project, composed of clips 6-8 seconds of time, waive the duration of the clip to make a presentation more chic does not seem an option.

  For a transition to build to use incoming and outgoing clip media. We call these handles. It has always been like that. Most people leave a few seconds out of their clips when adding to the timeline. With clips you just save a second at each end, and you can create a second 1 transition or the precision Editor to set the duration of the transition. A point to note is that this does not apply to photos that they automatically of the handles. Your transition that uses 2 seconds of your clips is a second transition 2. If you use the full clip in the timeline and add a transition, iMovie will warn you that it would take the clips to make the transition.

• iMovie 10.1.2 adjust the size of the clip in the timeline

  When I move a clip in the timeline, the size is reduced to a point where I can't move titles correctly.  I tried the setting of the slider, but it does not affect the components of the package.

  Hi, David,.

  You use the scroll bar that you get when you click the gear in the top middle of your screen.  This bar only works on clips in the clips pane, not in the time line.

  The slider beside the button settings in the middle right side of your screen expands the time line so that the clips in it are spread out more.

  Also, if you click on the settings button, a dialog box appears that contains a scroll bar to adjust the size of the clip in the timeline.

  Hope this helps,

  -Rich

• Firefox cannot resize the files of gmail download dialog

  When you use Gmail and I click on the attachment link to see the file download dialog box, it is always displayed full screen and I cannot resize. the small < < thing in the lower right corner does nothing and there is no resizing does not control in the upper right where X is. execution of Gmail using Chrome does not exhibit this problem. I recently did a Firefox "refresh" and it has not changed this behavior. It is a new problem that must be linked to a recent change somewhere that I saw this problem over the years of a prior use of Firefox and Gmail. He just did the same thing when you click Browse on this Mozilla support page - is not a specific problem of Gmail.

  Can you open the system menu via Alt + space and use Restore or resize?

• resize the address bar

  Is it possible to resize the address bar or the search box more icons will appear?

  While you can't resize the address bar, you can display as many icons as you like (until the search bar is totally inadequate). To do this, go to settings > customize and drag as many icons in your taskbar as you want.

  Have a great day!

  -Jon

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ