Resolution of problems starting SOA

Similar Questions

• a problem is preventing the resolution of problems starting

  My Lenovo P500 was working fine until yesterday morning.
  Since the opening of my pc yesterday morning, there is a problem. I could not connect to the network and audio system was also not working.
  'Network and sharing Center' in the Control Panel indicates "dependency service or group was able to start.
  I tried to solve the problems, but the problems said "a problem is preventing the troubleshooting tool to start.

  My system is Windows 8.1 64 - bit. Never formatted the system since I bought it in 2012

  razendra wrote:
  I remember the command, it does not work. Same mistake. "Error: 87.
  Cleaning-image option is unknown.
  I think it is a malware attack. The event log service is also unavailable.

  I suggested in post 4 on this subject and you answered that it is clean.

  For a quick solution, rather analyze what happens, try to back up your data and initiate the restore of the system through the key NOVO OKR. It should restore your unit to factory default. Note: after this, you will have to reinstall all the third-party program that you understand your data.

• Resolution / gambling problem please help me

  OK, I have vista 32 bit and when I get in any game at all and play... then get out of the wreck is fine... but then when I restart the Res changes again in the wreck the last game I played was set to and if the game does not have my native resolution it mess everything up on top of my desk and its starts to become annoying if someone could please help me because I really don't want to personalize then go to display settings and change every time that I log on... I tried to uninstall the latest software, tried to use the yahoo answers and they are not any help, MY RIG: AMD Athlon x 2 Dual Core 6000 + 3.1 Ghz, 8600 GT, 4 GB of ram, vista 32-bit , 22 inch monitor, native res: 1680 x 1050, Cyborg keyboard game... and I have IE8, any other information you need to know please ask me. Thanx

  Maniac of Vista,
  If you think that the problem started when you installed the Extreme 3D Pro stick, have you tried to uninstall it to see if the problem goes away?  Who will tell you for sure if that's the problem, you can access the web site of the manufacturer and see if they have a fix for this problem, or simply reinstall the software for the joystick could fix.

  You can also try to do a restore back before the problem occurred:
  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know if this helped, or if you need further assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Resolution of problem - unable to change to a lower resolution

  original title: resolution of problem, please help!

  The resolution on my monitor, I cannot go smaller. I can't move the resolution bar upwards or downwards

  and I am unable to change the screen type in the "display properties" under my control panel. Nothing I

  seems to fix the problem!

  Can anyone help?

  Thank you

  Hello

  • Create a restore http://support.microsoft.com/kb/948247 point
  • Start the PC in safe mode - F8 struck twice a second immediately after the ignition until you get a menu b & w, select Safe Mode from this menu. Don't worry strange messages or the appearance of the screen when he finally gets to the opening scene of session.
  • Log on as an administrative user - use admin if that is presented as a possibility
  • Click Start, click Run, type devmgmt.msc and press enter
  • Expand the display of the maps section by clicking on the +.
  • Right-click on any graphics contained therein and uninstall them
  • Restart the computer and wait that all devices to be detected again, select OK to all the prompts that appear, select automatic search if this option appears
  • Don't worry about the appearance of your screen immediately, once that all the material was again detected and installed, restart the PC again
  • Try to make the resolution changes after the second reboot

  If this messes up your PC use the restore point created in the first step to get things back the way they were http://support.microsoft.com/kb/306084

  After return if problems persist with details for further assitance.

  Tricky

• {I get the message: there was a problem starting C:\Users\jbondjbond\AppData\Local\Google\{F068CE0-714C-4 55F - 8A 56-F54EE47CB100} \qfjcfre.dll

  {I get the message: there was a problem starting C:\Users\jbondjbond\AppData\Local\Google\{F068CE0-714C-4 55F - 8A 56-F54EE47CB100} \qfjcfre.dll the specified module could not be found.

  This happens every time I restart the computer.  I tried to uninstall and reinstall Google Chrome which is the only Google on the computer.  It did not help, I still have the problem.

  Hello
   
  It seems that you receive an error message at startup 'there was a problem starting.
  C:\Users\jbondjbond\AppData\Local\Google\[F068CFE0-714C-455F-8=A56-F54EE47CB100]\qfjcfre.dll. The specified module could not be found. ».
   
  -What operating system is installed on your computer?
  -Do you have Google products installed on your computer? (Picasa, in car)
  -Did you do changes on the computer before this problem?
   
  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• SE error message: "Run"DLL"there is a problem starting. C:\Users/John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll

  Get the below error message every time I start my computer:

  Run DLLS
  There was a problem starting
  C:\users\John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll
  The specified module could not be found.

  Hello cuefox, thank you very much to judge me.
  We're here to help.
  Continue to browse the web with Firefox, thanks once more.

• Printing in 2 programs problem started 2 days ago, only firefox works fine with Internet Explorer?

  Services Bank web site has a "Print - Friendly View" text, on the top right of the page that displays the account information in a different format if you click on the text. Printing all other functions work ok. The problem isn't when you use them Internet Explorer. The other program is on the Aflacs website, and the problem is very similar. When I click on the text stating "Print copy of invoice", nothing happens, as the text of the Bank. Both work perfectly with Internet Explorer. The problem started about 2 days ago. When it works well, a window will open and show you what it will print and you click on the text "print", and it prints. Any help on this problem will be greatly appreciated.
  Thank you
  Joe Anderson

  You have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  When in Safe Mode...

  • The State of plugins is not affected.
  • Custom preferences are not affected.
  • All extensions are disabled.
  • The default theme is used, without a character.
  • userChrome.css and userContent.css are ignored.
  • The layout of the default toolbar is used.
  • The JIT Javascript compiler is disabled.
  • Hardware acceleration is disabled.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• Satellite C670 problems start after upgrade of Windows 10

  Hi all

  I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

  Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
  Impossible to do a spanking Granny restore F8 or F12 nothing to do
  If someone gives you the solution I'm interested
  Thank you, CDT

  
  Validation has been translated by Google Translator

• My iPad has been slow and unstable. What can I do if this is caused by a virus from the Internet because that is what I suspect. The problem started after a message like "scripts to run.

  My iPad has been slow and unstable - it actually seems to be hung when I use it. Once I put it, a blue line with four faces (which forms a rectangle or square) appears on the display and moves as he tries to anticipate my next actions or touch on the scree. All started about four days ago while I was downloading of articles in google scholar. A message that reflects something as "run scripts" or "scripts to run" appeared just before the problem started. Please advise on what I can do.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Qosmio F60 - hibernation of freezing and problems starting

  Hello...

  The problems started when my computer goes into hibernation mode and when I press the power button to launch once again, it remains frozen.
  I then press the switch to turn on it works again.
  Option just to start normally or in safe mode.
  Either way comp freezes in the middle of loading and I must push the switch down to the Tower model

  Then the new restart msg saying there is a problem in the start menu and asks me if I want to solve the problem
  I click Yes and a number of things have happened several times:
  (1) computer sets and loads normally
  (2) computer says he can not solve the problem and continues to load correctly
  (3) the computer freezes in the middle of loading or during the process of setting
  (4) computer sets and restarts but crashes in the middle of reloading

  I often have to go through this time half a dozen before I can load normally

  either way my norton antivirus has been come with messages saying I need to reactivate (my subscription is not exhausted) or an error has occurred
  have done a full virus scan - none found

  is this a virus problem? I do a system restore? any other advice?
  help much appreciated

  Hi kkle4,

  You use the preinstalled version of Windows 7 in Toshiba? I can t find any information in your posting on OS :(

  Otherwise I agree with Akuma and you should check the BIOS version and probably an update would be useful. Before you begin to update of the BIOS here are some useful tips:
  -Close all running programs (also, antivirus, firewall, etc.)
  -Make sure that you are logged on as an administrator
  -Unzip all files from zip archive
  -Connect the AC adapter before you can update the BIOS and make sure the battery is fully charged

• Problem starting Equium L40

  Hello

  I use F1 to start my Equium L40 every time I tun turn it on. It will then start ok but he forgot the time and date, as soon as I update time / date, the computer works perfectly I can access all my email etc accounts without having to put anything.

  The problem started after the replacement of the battery because of that being almost completely dead. I noticed that the computer will not work on AC only without mounted battey but is still charging the battery ok. (if the adapter is ok)

  I love the computer and do not really want to buy a new, but it is very frustrating and tedious when I turn it on.

  Maybe there is a battery backup I can change to fix the problem?

  Any help would be appreciated?

  Hello

  Laptop should also work without battery but connected to the power adapter
  So I guess that your motherboard is affected in some way.

  If the RTC battery (bios) is empty, the time and date in the BIOS menu would be reset to the default value. But in my opinion, this shouldn't be a problem to use the laptop with AC adapter.

  However, the RTC battery can be charged to do that you need to connect the main battery and power adapter and the laptop must be turned on for a longer period of time (18-20 hours).

  Check it out!

• HP27-k350xt:. On each startup, I get this message. "There was a problem starting C:\Users\bulldog2u\AppData.

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  BULLDOG2U wrote:
  

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  You don't want in this file.  Ads by Call Builder is malware that opens the ads on your computer.  If you encounter this error, then it is likely that you have an antivirus/antimalware program which was removed from your computer, but left the startup item.  More information on Call Builder, and how to remove can be found here.

  To remove this item from your startup list, follow these steps:

  System (Windows 7) Configuration utility

  1. In the start search box, type MSCONFIG and press ENTER.
  2. Click the Startup tab.
  3. Uncheck the items you want to run at startup.
  4. When you have finished your selections, click OK.
  5. In the box that appears, click on restart to restart your computer.

• Re: Problem starting L300

  Hello. I'm having a problem starting my L300 - it works very well up until now and has suddenly developed this problem.

  When turned on it, - very slowly - boots for the logo toshiba with the message "F2 for the Setup utility, F12 for Boot Manager" standard, but does not spent there - if left for a while it's just back to the blank black screen, the cursor in the upper corner of flasher for turn a little and then out. F2 or F12 do anything.

  Anyone got any ideas, what could go wrong? :(

  Hello

  Sorry, if I do not understand you correctly. You have a message like, Manager of boot is damaged?

• HP all-in-one 4620: uninstalled 4620 printer but getting 'problem starting HPStatusBl.dll' notice at startup.

  I uninstalled the printer software HP 4620 on my HP computer running Windows 8.1. When you start the computer, I get the message "error loading c:\programfiles\hp\hpofficejet4620series\bin\hpstatusbl.dll" window message

  Hey @SteveJG,

  I would like to help you today to solve the 'problem starting HPStatusBL.dll' message that you get on your computer Windows 8.1. I understand that the uninstall your HP Officejet 4620 e-all-in-one printer has not made a difference. Just so you know, this error message is for a 'service' that Windows is trying to start it's related to the HP device. I just go and delete this file manually. Please follow the steps below.

  1. Open the Start screen by selecting the Windows button in the bottom left of your computer screen, or by clicking the Windows button in the bottom left of the keyboard, to the right of the Ctrl key.
  2. When the splash screen opens, type computer (can show that This PC)
  3. Click on the computer (or PC) to start the window
  4. When the computer window opens, click on the Drive C
  5. Click on users
  6. Click on your user name
  7. Select AppData
  8. Select roaming
  9. Select Microsoft
  10. Select Windows
  11. Select the Start Menu
  12. Select programs
  13. Finally, click Start
  14. You will see a shortcut here to monitor alerts - ink HP xxxxx. Right click on this and 'Remove' it.

  Once the file monitor ink Alters has been removed, restart your computer to verify that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Lenovo X 230, CustomEventMonitor.dll 'there is a problem starting'

  Dear Sirs,

  Just after the connection of Win10, I begin to get this error message. How to solve this problem?

  'There is a problem starting'

  and right under "is not a valid Win32 application".

  Here's what it looks like - error

  The answers will go,

  Thank you