Resolution? Small screen for the Ant people. PLEs help.

Similar Questions

• HP Photosmart C4650 with the TouchSmart small screen on the left-side printer does not

  Original title: printer won't start

  I turn on my printer and it won't start. It turns on, but where you put the ink does not move and the scanner will not even move also. He always tells me to place the white paper, but there are already some paper in it. He also tells me that it is printing the alignment paper thing, but he never check or print. It keeps beeping too and continues to change the screen, it's like someone change but no it isn't even touching.

  my printer is a HP Photosmart C4650 with the TouchSmart small screen on the left side.
  Help me!!!

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, you are facing problems with the HP printer.

  1. What is the exact error message you get?
  2. did you last changes before the show?

  I suggest you try the methods provided below and check if it helps.

  Method 1:

  Solve printer problems

  http://Windows.Microsoft.com/is-is/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  How can I check my ink or toner levels?

  http://Windows.Microsoft.com/is-is/Windows7/how-do-I-change-my-ink-or-toner-levels

  Print a document or file
  http://Windows.Microsoft.com/en-us/Windows7/print-a-document-or-file

  Choose printing options
  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

  For more information:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

  Please follow these recommended steps and post if you still experience the problem. I will be happy to provide you with additional options

• YouTube load black screen for the first five seconds

  As of the beginning of January 2013 in Firefox, videos YouTube are responsible as empty black screens for the first five seconds. 0:06 mark, video begin to play normally. This isn't a problem in Chrome or IE. Tested with all plug-ins and Add-ons disabled (except Flash player). Plug-ins/add-ons custom updated. Tried to reinstall Firefox without solution. Help? Thank you!

  You can check the problems caused by the recent updates of Flash and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • disable the safe_mode in Flash 11.3 and later versions
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting

• 2 small screens in the taskbar next to the icon icon & start-up Volume no longer shows connectivity

  Used too point & click two small screens in the taskbar & he would show a pop-up of time I am connected to the Internet: Local & Internet or just local...; but now it does nothing when I click on 2 screens. Now I hav' your going to the center of network & share too to try & get a local connectivity & Internet...? Please HELP TROUBLE... ?

  Make sure you have your router password handy.

  Try to remove your network router and sharing (where it shows all routers in range) and establish a new connection. He asks a place to always check "use this connection first" or something in that sense... Make sure you do.

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  If you have problems with interference from other neighboring routers then change the channel on your passes. You will need to read the manual of your router to find out how (it's usually very easy) and choose a channel to the top of the band.

  Vista should carry, connect to your router with you having to do nothing whenever you start.

• Full screen for the entire work area (not 1 module)

  Hi guys,.

  Is it possible to activate the mode full-screen for the work in first Pro CC, as well as Shift + F area how for Lightroom? Tilde and ctrl + tilde does full-screen for the selected module. I want just the complete workspace in sight.

  CTRL + \.

• I'm trying to find the paint bucket tool in the new draw for the ipad. can someone help me?

  I'm trying to find the paint bucket tool in the new draw for the ipad. can someone help me?

  You are referring to the iOS app? Tap into a confined space with one of the tools of painting until it fills up.

• When I click on 'Options', the popup gives me a white screen for the latest updates of 4 or 5.

  Since 4 or 5 updates ago, I could not access the options on Firefox. It is for me an empty popup. It's strange to see just a screen empty and unable to do anything. All the other menus work. Addons option works, but I can't in my General options. I was desperate enough to try SeaMonkey, but I really want to Firefox (and Yes, the works of Seamonkey).

  Hello, this problem is usually caused by the ghostery addon - you could try to disable...
  https://getsatisfaction.com/Ghostery/topics/problem-with-Firefox-32-Firefox-option-is-not-displayed-when-Ghostery-is-active-in-Firefox-32

  Another solution would be to switch to the new interface of firefox preferences that will set the preferences menu in a tab:
  enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.preferences.inContent. Double-click it and change its value to true.

• I hope to find a solution to the problem of the video screen FOR the dell latitude 10 Tablet

  Hello

  I have the dell latitude 10 Tablet

  I have a problem in the video display device and especially if the video is HD with precision
  Video is very slow and "forced" terribly... I'm surprised this problem.
  Formate worked for the device is not not to solve the problem... Experience the same video on the w510 Acer Tablet and it works fine
  Fact the imbalance of the is the problem of my camera... or what specific problem... Help, please

  Hi ALI IBRAHEM,.

  If I understand you correctly, HD video playback problem has been resolved by installing the driver Pack for the user installing Intel.

  To control the imaging (Webcam) of Windows 8 machine does not need to install the camera application. Windows 8 operating system has 'Camera' app. You can access the application 'Camera' of the start screen. In case you are not able to see the application of the 'Camera' on the start screen, you can download it "Windows Store Apps".

  • In the start screen, click the tile 'Camera' to open the application
  • If the app invite you to use your camera and microphone, choose "allow".
  • Adjust the settings, if desired
  • To take a picture, click anywhere on the screen
  • The camera app saves all your loving photos and videos in a folder called "Camera Roll" in your photo library.

  Answer please if you have any other questions. I'd be happy to help you.

• Turn off the display on the screen for the next meetings

  I have several MX300s TC7.3.6 running.

  They are all registered to CUCM and TMS as the alternative directory server.

  Can you tell me how to disable the meetings to come, displayed on the screen?

  The MX800s have a field in CUCM for OSD - Todays booking power, but not the MX300s

  THX,

  Rob

  The command is there for the MX800 won't say he supports it, the TodaysBooking configuration is supported only on older codecs that perform TC software.  It isn't a way to disable the OSD indicator for future meetings, your only option is to use a custom wallpaper that will eliminate some parts of the OSD as the clock and the list of upcoming meetings.

• White screen for the jspx files

  Hello
  I'm trying to deploy a Hello World ADF Faces Rich Client base.
  All the .html files are served well, but all the files just jspx give me a blank screen in the browser. For example:
  
  http://Server1/TestApp/index.html - works fine.
  http://Server1/TestApp/faces/TestPage.JSPX - gives white screen.
  
  I'm sure I'm missing something ridiculous, but any assistance gratefully received.
  
  In JDeveloper 11.1.1.6 WLS 11.1.1.6 using inclusion WLS managed server or stand-alone.
  
  Thank you

  In addition, the memory consumption it takes longer time for a page. And as see you in your case it results in unpredictable behavior that you have to understand what how memory is used when the bean is visible what another application domain. See http://adfhowto.blogspot.de/2011/01/adf-faces-memory-scopes.html for more on that inside.
  As you can link an item to a bean later, when you really need, I see no reason to link all components to a bean automatically.

  Remove all links to your page and try again...

  Timo

• I'll buy a range wide screen for the right reason?

  I currently shoot Adobe RGB, correct color using XRite color passport (when I can), test in lightroom and print using a Canon Pixma pro 9500 mk2.

  I use photo munki color to match my two monitors to my printer and I have enough happy with my results. However both my monitors are sRGB, during proofing I often get warnings from the range of monitors.

  My plan is to keep a sRGB for the web and games and replace the other monitor with a range wide screen.

  I get a new monitor independently, so I was wondering if I should get the following screen:

  http://www.Amazon.co.UK/GP/product/B00B1QTZOE/ref=oh_details_o00_s00_i00?ie=UTF8 & PSC = 1

  for the following reasons:

  1. The only thing in my workflow that can not handle a wide range is my monitor
  2. It is seems the best value for a range wide screen
  3. I think I can use my existing hardware standard to create profiles to keep constant color, so if the monitor is calibrated in the factory is not relevant
  4. The calibrator built controversial material is not a big problem for me because I have my own equipment

  Am I missing something?

  Should I spend the extra money on a NEC or an Eizo?

  I'm not a professional; However I like to shoot and print. I want to print to be the best it can. I understand that I can get good results with sRGB workflow, but it really upset me when I want to print a photo that clearly my monitor struggles to make.

  I always recommend Spectraview 272 - if you have the money for it. The only one to compete with it is the Eizo CG 276.

  It is much more than the range, it's true colors, good tonal separation all the way from 0-255 and consistency from corner to corner. And hardware calibration ensures absolutely smooth gradients without color or tonal stripes.

  b1uedust wrote:

  I also want to overcome all the problems with how windows supports multiple mismanagement on lut on a single GFX card which has two setup screens

  There is no problem; It is a myth strangely long life. There was a little problem with pre - SP1 Vista, where the LUTE was put at the door when the monitor went to sleep or the UAC has been invoked. It has been corrected in SP1 and has never been seen since. The only other possible problem is a Stallion without support monitor multiple (as the Spyder4express), but you can't blame Microsoft for this.

• Screening for the Virus VMware environment?

  Hello fellow VMware users.

  I decided to set up an environment of virtual-screening machine of the virus.

  I wanted to ask if anyone had

  knowledge on how to prevent the host - interaction of the virtual machine. I'm going to

  most likely use a network bridge connection to my own computer and I

  you want to secure any possibility that a virus can infiltrate my host

  computer (such as a worm or something) or the network on which I am running (there are other computers in the same network in my house), if there is no chance

  This could happen. I'm just wanting to know if there is something that

  I can do to ensure the security of my computer (s) before going to follow and put

  This crazy idea?

  Thanks in advance.

  Other info: don't know if this is important: running an XP Home Edition SP3 - processor Pentium 4-3, 00 GHz - 1 GB RAM

  Under VMware Workstation version 6.5.3 of XP Home Edition

  I would try using NAT, which essentially lets you share the IP address of the workstation host and you can communicate with other systems and the Internet.  I have no advice for you on 'subjects' If you are referring to where you are going to get viruses for the test. The only one I know of we is the well-known Eicar test virus.  You can find it here: http://www.eicar.org/anti_virus_test_file.htm.

  I still think that the safest way to do this is to disable the NIC in total.  You can always transfer files to the virtual machine via shared folders option in the VMware tools and ensure the safety of your host system.  You can transfer new definitions of virus, infected files, and ensure the safety of your host system while having your completely isolated test bench.

  If you end up using this to create a new virus and causing pain for IT administrators around the world, do me a favor and forget I gave him advice.

• What is the best way to keep the high resolution when recording "for the web".

  the files that I save to the web so I can get them in jpg (or gif) are coming very pixelated.  That's when I print the image.

  What is the best way to save for the web, an image and keep the good resolution.

  using a business card template.  template Avery will allow me to attach images I want to project.  to do this...  I 'get file computer' and it deletes the image in but real little... then you are supposed to expand on your work as you want.  Well, when I enlarge this image file, it gets pixelated bad.  I think it's the way that I am saving it.  I do not adjust anything when I save.  Maybe I should.  This is where I need advice.

  That's what avery model notes on the images, I am allowed to use - when downloading the image, the maximum allowed size is 4 MB.  You can download the JPG and PNG RGB or CMYK images.  so when you recommend things, can you please take this into account

  Thanks for oyur times.

  Aida,.

  When you register with the default template using save for web, it's usually a setting very low.

  While in the registration window, you can set the size in pixels of the image you want with the quality and the resolution too.

  Refer to video tv.adobe.com save for web or Adobe Help file for detailed instructions.

  Florian

• Several uses for the final product, need help with Render & output parameters

  Aloha, this is my 1st time in this forum... posted this question in Premier Pro and has been mentioned here.

  I created an effect straight project. I want to make four 4 very specific uses.  Unfortunately, I don't know anything about these formats to be given options in AE - CS4.  One of the many 'rendering settings' and 'output module' settings 'make model '.  This seems the best option for me given my future use: 1) for the DVD; (2) for electronic mail; (3) for YouTube. (4) my web site.  I read and reread the rendering and export options in the manual of use-AE CS4 without success in understanding what each option should be used for.  I need help in the translation of pixelpicker-talk.

  Can someone help me about these accurate "rendering settings" and "output module" parameters listed in AE in the option "make and model"?

  Thanks a lot... come visit the watrer is warm and clear as always.

  KonaDon

  I understand - I think the article using After Effects is a very complete resource, explaining the various features and their purposes. But the real world is full of special cases that are very difficult to address in a manual. In addition, it is a moving target. Different best options today probably the best choice, next year.

  Let's see if we can help here:

  1-. DVD: on the technical side, it is always MPEG-2. A very specific taste of MPEG-2. But while After Effects will let you export a file of this type (choosing the MPEG - 2 DVD is predefined in the output Module), it is also true that most of the applications (such as Adobe Encore DVD) DVD authoring are very friendly in terms of letting you wear one (ideally, uncompressed) Quicktime or AVI (which in no way is compatible DVD) and do the encoding in MPEG-2 for you. So it is up to you: you can encode EI using the preset DVD MPEG-2, or you can use an application of coding specialized (such as Adobe Media Encoder in stand-alone mode) or simply let the DVD authoring application do the encoding for you. This should be very simple and in this case, you can simply render a Quicktime or AVI file without loss (there is a model of output Module called "Lossless" who will take care of everything. You can use the default value, the 'best' model to make settings in most cases).

  2-. E-mail: on the one hand, you need something that is really light and as good quality as possible. In the other, you want something universal compatibility, which can be read in all or almost all computers. H264 (advanced version of MPEG-4) format is really good in terms of efficiency, but its ' adoption is perhaps not as widespread yet. Flash Video (FLV) is really good in this regard. In this case, you could choose Adobe Flash Video (FLV) as the format in the output Module and then choose preset FLV 'Flash 8 web small' for this purpose.

  3 YouTube: it's not that simple. The ideal format for YouTube is not quite exist, they insist on the re-encoding each file that you download, even if your file is technically identical in every way to their versions. So what you want here is something that looks good and it isn't huge to download. This all spells 'H264', in my opinion. The details depend on the question of if your Composition is HD or SD, 4:3 or 16:9, etc. Strange as it may seem, the big "iPod" preset for the format H264 is a good starting point. You can customize it to increase the speed of transmission a little (maybe 2 or 2.5 Mbps, against 1.5 Mbps).

  4 website: even once, you need something that most people already have in their computers. Flash Video is an excellent choice, since about 98 percent of users have the Flash plugin. But in this case, you can have more great heights and flow rates, so you can use the "Flash 8 big' defined by default as a starting point. Once the Flash 10 plugin (which now supports the H264 in addition FLV) spreads in the future, you could standardize on H264 in a delivery format, with different settings for each type of destination.

  I hope this helps.

• TreeSize Professional - using this tool for the first time - need help to run the report

  Using TreeSize Professional for the first time and I need search records to analyze documents containing invalid characters and path names that are too long.  We are moving the content in SharePoiint and SharePoint will not accept path names that are more than 250 characters and invalid characters.

  Does anyone know how to do this research?

  [Moved from the community centre of Participation]

  What is a TreeSize question or a question of SharePoint?

  Try SharePoint forums on the left side of

  https://social.technet.Microsoft.com/forums/en-us/home?category=SharePoint&filter=AllTypes&sort=lastpostdesc

  Don