ResourceBundle cannot contain only 7 keys?

Similar Questions

• I forgot my administrator password. How can I connect? I don't have my drive only product key.

  I forgot my administrator password. How can I connect? I don't have my drive only product key.

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• The specified account name is not valid, because account names cannot contain the following characters * {} [] +=? *

  Original title: can't do user account
  I can't do a different account on my windows vista computer.  When I try to make another account, it says this "the specified account name is not valid, because account names cannot contain the following characters * {} [] +=?" "*" even if I don't use any of those what should I do?

  the only account on my computer is a guest account, it's a story of administering it. This is - why it doesn't let me make a new account? had this problem for 2 years

  Hello

  Try these steps to create a new account:
  a. log on under an account that has administrator privileges.
  b. Click Start.
  c. type the three letters cmd in the search box.
  d. press Ctrl + Shift + Enter
  e. click "Run as Administrator".
  f. type the following commands and press ENTER after each one:
  net users
  NET user 'Jack' xxyyzz / add
  net localgroup administrators/add ' Jack'

  The first command displays all existing account names.
  The second command creates an account named 'Jack' with a password of "xxyyzz".
  The third command will make Jack administrator.
  
  Check the link for more help:
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• Please help - I don't understand this: because iPad can contain only the content of five Apple ID.

  I give my son my iPad.

  I try to download Apps on it and I get the message: some of the files in the iTunes Store iTunes library were not copied to the iPad because iPad can contain only the content of five Apple ID.

  As far as I know there are only 2 Apple ID involved - my own and the one we did for him as a minor.

  If someone has had this problem and can you help me to overcome.

  It is typical that this situation happens the day before her birthday - I wanted to give him tomorrow all loaded with his own stuff. It five of its apps accepted last month when I first came with the idea and now...

  Anyone?

  This means what it means: iTunes Store items are tagged with the Apple that was used to buy ID. Apparently in this case, for some reason, over 5 ID are involved. Which could include accounts that are no longer used.

  In general, it is best to follow these steps before giving your iPad to someone else: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• Satellite L505 - 10K - recovery disk contains only Windows 7 32-bit

  Hello, I have a question.

  I bought a Satellite L505 - 10 k a month ago. It came with Windows 7 x 64, 3 partitions (I don't know why, 3? seriously?). I tried to install Linux, delete the last partition, called 'Data' and I screw them completely. I used the recovery DVDs to bring the phone to default settings and I discovered the system recover is Windows 7 x 32.

  No idea why the systems are different?

  It's just a minor issue, I guess, the only bad thing is that the x 32 system recognizes not the 4 GB of RAM. I use now only 3 GB of RAM.

  Hi Cabo_Nobbdy,

  I think you should check your user manual and the specificaitions of your laptop first before starting a question. I founded the following information:
  + Operating system: Genuine Windows 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery) and Genuine Windows 7 Home Premium 32 - bit (Toshiba-Recovery DVD) +.

  This means that the recovery for Windows 7 64-bit disk, you need to create by * you *!
  The DVD that came with your laptop recovery contains only 32-bit Windows 7, and normally, you can create the recovery disk using the Toshiba recovery disc creator. I put t understand why you didn't do it because after the first start, you get this message:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

  But now it s too late for that and you have to order a new Toshiba recovery disc yourself:
  https://backupmedia.Toshiba.EU/landing.aspx

• Cannot modify only directory attributes of reading, all the readers all the directories.

  Original title: cannot modify only directory attributes of reading, all the readers all the direcotries.

  For some reason now all directories are read-only. I have a check only reading tab, it goes through the process of change in all files in the subdirectory (I put their scrolling), click ok. But when I go in the directory again that reading is only check again. It is on my C: dirve all directories and all the other readers, including empty directories. Any suggestion would be appreciated. Thank you
  Bit defender shows no problem.
  SdS49r

  Hi SdS49r,

  I would like to ask you a few questions to better understand:

  (a) you connected to the administrator account? because you do not have the \n(Assurez-vous if you are not in the administrator account

  (b) don't you make changes on the computer?

  (c) have you created the file read-only?

  (d) what message do you get while changing the read-only attribute?

  (e) have you been able to change the attributes previously in your computer?

  You can scan your computer, then follow the steps in the link: http://www.microsoft.com/Security_Essentials/

  Try the system restore, it restores the computer to its point earlier while it was working fine.

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  
  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Red of containment:-only cisco 7920 seems to be contained.

  I'm running a WLC on a series of 2800 NM with version 5.0 and a LWAPP AP 1131.

  I have a Netgear access point within range of my Cisco AP 1131.

  When I turn on red for this NetGear access point containment, it seems to work, but ONLY a phone Cisco 7921 associated with the NetGear AP conttains.

  The WLC detects all other customers that are associated with the AP (my Netgear) red.

  Also, under the Red clients, it seems detect some models of Intel and Apple customers (from neighbouring networks).

  Is this a limitation of how the WLC is red containment?

  Can it detect / contain only CCX the devices off MFP with?

  Are a lot of older laptops that use cards Intel immune to this kind of containment?

  Thank you

  It's really interesting. If you do a comparison of the side-by-side with the 7921 clients & Blackberry, what differences do you see? They casually operate at speeds that are not supported by the AP? If you have data rates B turned off, for example, which could prevent the AP to see clients B.

  Maybe you could bring more a couple of customers more and see if any of them deleted.

• Windows 8 Beta - cannot verify the product key

  Hi all

  After you have installed Windows 8 beta last year on my laptop, I bought the upgrade to the full version of Windows 8 and received a product key by e-mail as part of the purchase or download.  Now, I'm trying to use the same disk of Windows 8 Beta to install the OS on my desktop.  After you enter the product key, I get a message saying "cannot verify the product key - check your installation media."

  Can someone explain why the beta key does not work and if I get a new key?

  Thank you

  No, you can't, but what you can do is, use the following link to download and create the installation media that you can use to upgrade other computers.

  Please note, if other computers are running versions of 32-bit or 64-bit, you will need to create a respective installation media corresponding to the architecture of the facilities running on these computers (32 or 64-bit):

  If you must reinstall Windows 8 or you want to install it on one partition and you do not have installation media, you can create it using the installer of Windows 8. To create a support, you must use a PC running Windows 8.1, Windows 8, or Windows 7, and it must have the same architecture (32 or 64-bit) than the PC you want to install Windows 8.1 on. You will also need your product key of Windows 8.

  You can usually find your product key in your online order information, in the confirmation email of your purchase, or on the DVD packaging. The product key will look something like this: XXXXX - XXXXX-XXXXX-XXXXX-XXXXX.

  Once you have your product key and you are on a PC running Windows 7, Windows 8 or 8.1 of Windows, follow these steps:

  1. Run the program installation of Windows 8 .

  2. When you are prompted to run or save the file, choose run

  3. When you are prompted to enter a product key, enter the 25-character product key, that you received when you purchased Windows 8.1.

  4. When you are prompted to install Windows 8.1, select install by creating media and then click Next.

  Select the type of media you want to use: either a Flash DRIVE or a DVD.

  To create a USB flash drive

  1. Click on a USB flash drive.

  2. Plug the USB key into a USB port on your PC.

  3. When you are prompted, select the USB key that you want to use, and then click Next.

     If you have files on the USB flash drive, it will remove them.

  To create a DVD

  1. Click on the ISO file, and then select the location where to save the ISO file.

  2. Insert a blank recordable DVD into your DVD drive.

  3. Burn the ISO of the DVD file using Windows disc Image burner, or another program DVD burning.

  Please note that you will have a unique individual license (product key) for each computer you want to upgrade.

  You can buy additional product keys to:

  http://www.Windows.com/buy

• Another user has modified the line containing oracle.jbo.Key [186 primary key].

  

  as summer sees in this photo, when I click on the button to edit, it will invoke the code like this:

  BindingContext bcxt1 = BindingContext.getCurrent ();

  DCBindingContainer bc1 = (DCBindingContainer) bcxt1.getCurrentBindingsEntry ();

  DCIteratorBinding iterProj = bc1.findIteratorBinding("CuxProjects1Iterator");

  DC DCDataControl = iterProj.getDataControl ();

  ApplicationModule am = (ApplicationModule) dc.getDataProvider ();

  ViewObject projVO = am.findViewObject("CuxProjects1");

  projVO.clearCache ();

  projVO.setNamedWhereClauseParam ("project", currProjId);

  projVO.executeQuery ();

  got this page with changes on the name of the project:

  

  then click on 'done' button.invoke a procedure like this:

  State channel = null;

  DBTransaction connection BD = this.getDBTransaction ();

  CallableStatement st =

  BD connection.createCallableStatement ("start cux_projects_crud.update_proj(?,?,?,?,?,?,?); end; ", 0) ;

  try {}

  st.setInt (1, proId);

  st.setString (2, proName);

  st.setString (3, proSummary);

  st.setDate (4, null);

  st.setDate (5, endDate);

  st.setInt (6, userId);

  st.registerOutParameter (7, Types.CHAR);

  st.executeUpdate ();

  State = st.getString (7);

  Then return to the first page as the top image.

  My problem is not rested but redesigned data into DB. When I click on the button to edit again, I get ' javax.faces.el.EvaluationException: oracle.jbo.RowInconsistentException: Houston-25014: another user has modified the line containing oracle.jbo.Key [186 primary key].» This error. How to solve this problem?

  In addition, I see a problem that the changes you make in the procedure are not validated and will not be picked up by the query.

  Timo

• Contains only contains one and not - how PLSQL

  Hi all

  I'm writing a plsql code I need some advice.

  How can I optimize contains only - all - contains contains not in PLSQL.

  For Ex:

  If l_string1 ContainsOnly "ABCDEFGHIJKL" (a set of values)

  If l_string2 ContainsAny ' + -/'

  If l_string3 ContainsNot "1234567890"

  Thank you

  Aman

  Hello

  If you are really determined to do not post sample data, and then publish an issue involving sample data of people who want to help you already, or readily available, such as the tables in the scott schema or HR.

  For example, consider the ename column of the table scott.emp, which has these values:

  ENAME

  ----------

  ADAMS

  ALLEN

  BLAKE

  CLARK

  FORD

  JAMES

  JONES

  KING

  MARTIN

  MILLER

  SCOTT

  SMITH

  TURNER

  WARD

  Say you're interested in finding the enames which consist exclusively of letters from the 'A' series of 'n', i.e.:

  ENAME

  ----------

  ALLEN

  BLAKE

  KING

  Here are 3 ways to do it.  (I produce these results

  ENAME NR L R

  ---------- -- -- --

  ADAMS

  ALLEN OK OK OK

  BLAKE OK OK OK

  CLARK

  FORD

  JAMES

  JONES

  OK OK OK KING

  MARTIN

  MILLER

  SCOTT

  SMITH

  TURNER

  WARD

  just to test 3-way at the same time and to ensure that they are equivalent.  You might what to use conditions in a WHERE clause, and not a CASE expression.)

  This is the query that produced the above results:

  SELECT ename

  CASE

  WHEN NOT REGEXP_LIKE (ename

  , '[^A-N]'

  )

  AND THEN 'OK '.

  END AS nr

  CASE

  WHEN LTRIM (ename

  , "ABCDEFGHIJKLMN".

  ) IS NULL

  AND THEN 'OK '.

  END as l

  CASE

  WHEN REGEXP_LIKE (ename

  , '^[A-N]+$'

  )

  AND THEN 'OK '.

  END AS r

  FROM scott.emp

  ORDER BY ename

  ;

  In reply #5, you have shown that you already know how to find what lines that contain all the letters

  OTHER THAN « A » ' n '.  To find the containing enames

  ONLY ' ' 'N', you can simply use the NOT operator.  In other words, an ename contains ONLY A - N if (and only if) it does not any letter ANOTHER THAT A - N.  This is the approach used in the column above nr.  However, I think that the other ways (column l and r) are better; l is more effective.

• Another user has modified the line containing oracle.jbo.Key primary key

  Hello

  In jdev 12 c

  I have a jsf page in a BTF, and there is a display of master(A:readonly table)-detail(B1:readonly table)-detail(B2:editable form) this page

  The (readonly table) B1 and B2 (editable form) are created on the same data control. There is no other layout compicated or functions on this page.

  The B2 (editable form) was based on a VO whose id is a type of DBSequence, and the new value has been created by a database trigger.

  I put

  All the columns that are updated by a database trigger or a PL/SQL call, are enabled for "Refersh on Insert" (for the case of the insertion) or "Refresh update" (for the case of update) or both in the entity object xml file.

  But when I submit/validate the page (form B2), the error msg 'another user has changed the line containing oracle.jbo.Key primary key' was always held randonly.

  And after the error msg, I can commit the data successfully by press the button validate again.

  How can I solve this problem?

  Thank you.

  The problem is that you use the pl/sql code. It is run out of the box. When a change is made in a row in this way, the framework removes upward, neither knowing that the change was done rightly and throws an error message.

  The code (which I copied from the other thread for reference) intercepts the error and re executs the lock in the case of the specific error.

  /*** customizing locking management:

  * Because attribute values can change 'outside' ADF standard life cycle,

  * when optimistic locking executes, the exception "Another User Changed the Row" is thrown.

  * In this case, we execute locking again, ignoring the exception

  */

  public void lock()

  {

  try

  {

    super.lock();

  } catch (oracle.jbo.RowInconsistentException e)

  {

    if (e.getErrorCode().equals("25014"))

    {

    super.lock();

    }

    else throw e;

  }

  }

  


  Timo

• What is this error represents "another user has changed the line containing oracle.jbo.Key [21 primary key]."

  Mr President.

  What is this error represents "another user has changed the line containing oracle.jbo.Key [21 primary key]."

  Concerning

  You get this exception quite often when you have a business in PL SQL layer, but you can safely ignore (suppress) it by substituting the lock() method in all implementation of your entity classes.

  /*** customizing locking management: 
  * Because attribute values can change 'outside' ADF standard life cycle, 
  * when optimistic locking executes, the exception "Another User Changed the Row" is thrown. 
  * In this case, we execute locking again, ignoring the exception 
  */ 
  public void lock() 
  { 
   try 
   { 
    super.lock(); 
   } catch (oracle.jbo.RowInconsistentException e) 
   { 
    if (e.getErrorCode().equals("25014")) 
    { 
    super.lock(); 
    } 
    else throw e; 
   } 
  }
  

• ADF: addition of the JSF error message: another user has modified the line containing oracle.jbo.Key [185 primary key].

  When you call the function DB. The function performs its operation, but shows an exception. In JDev 11.1.2.3

  And there is not another user. I'm testing alone.

  ADF: addition of the JSF error message: another user has modified the line containing oracle.jbo.Key [185 primary key].

  oracle.jbo.RowInconsistentException: Houston-25014: another user has modified the line containing oracle.jbo.Key [185 primary key].

  The problem is that the function db has a commit and my code also. However the db function called once in a case.

  Thanks a lot for your help.

• Battle of external table: files that contain only a picture

  Hello

  Does anyone know if this is possible: use an external table to load files that each contain only one photo (photo) in a BLOB column?

  So: just a photo, not other columns and not many lines.

  I tried, in the sense of this article: ORACLE-DATABASE external Tables containing LOB -

  I'm starting to believe it is not possible due to the "delimited records by ' and 'fields terminated by' clauses, which are not really applicable given files (just a picture), but maybe (hopefully), I'm wrong.

  Any pointer is more than welcome!

  BANNER

  ----------------------------------------------------------------

  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi

  PL/SQL Release 10.2.0.4.0 - Production

  CORE 10.2.0.4.0 Production

  AMT for HP - UX: release 10.2.0.4.0 - Production

  NLSRTL Version 10.2.0.4.0 - Production

  5 selected lines.

  SQL > drop table photo_ext is serving;

  Deleted table.

  SQL > create table photo_ext

  2 (blob_content blob

  3   )

  4 external organization

  5 (type oracle_loader

  6 default directory tmp

  7 access settings

  8 (records delimited by newline

  9 nobadfile

  10 nologfile

  11 fields completed by «,»

  12 field missing values are null

  (13)

  14 blob_filename tank (100)

  15)

  16 transformations column (lobfile (blob_filename) of the blob (tmp) blob_content)

  17)

  18 rental

  19 ("54618645837_vp3.jpg",

  20 "54618645837_vp4.jpg."

  21 "54618645837_vp2.jpg."

  22 "54618645837_vp1.jpg."

  23 "54618645837.jpg."

  24 "54618636860_vp6.jpg."

  25 "54618636860_vp5.jpg."

  26 "54618636860_vp4.jpg."

  27 "54618636860_vp3.jpg."

  28 '54618636860_vp2.jpg '.

  29       )

  30)

  31 reject limit unlimited;

  Table created.

  SQL > select DBMS_LOB.getlength (blob_content) AS blob_length of photo_ext;

  Select DBMS_LOB.getlength (blob_content) AS photo_ext blob_length

  *

  ERROR on line 1:

  ORA-29913: error in executing ODCIEXTTABLEFETCH legend

  ORA-29400: data cartridge error

  KUP-04001: doing bij openen van bestand/tmp /.

  ORA-06512: at "SYS." ORACLE_LOADER', line 52

  You need for your names to jpg files in a text file, the name of one file per line in the list, then use the name of the text file as your location in your outer table.  In the example below, I've listed just a jpg file bridge.jpg in text file test.dat.

  Scott@orcl12c > host type test.dat

  Bridge.jpg

  Scott@orcl12c > create or replace directory tmp as 'c:\my_oracle_files '.

  2.

  Created directory.

  Scott@orcl12c > create table photo_ext

  2 (blob_content blob)

  3 the external organization

  4 (type oracle_loader

  5 by default directory tmp

  6 access settings

  7 (records delimited by newline

  8 nobadfile

  9 nologfile

  10 fields completed by «,»

  11 lack of field values are null

  12 (blob_filename tank (100))

  13 column transformations

  14 (lobfile (blob_filename) of the blob (tmp) blob_content))

  15 rental ("test.dat"))

  release limit 16 unlimited

  17.

  Table created.

  Scott@orcl12c > select DBMS_LOB.getlength (blob_content) AS photo_ext blob_length

  2.

  BLOB_LENGTH

  -----------

  511500

  1 selected line.

• I bought a version student Adobe 3 years... my computer has recently had to be reconfigured, I want to save my copy again, but cannot locate the registration key! How can I get a key please.

  I bought a version student Adobe 3 years... my computer has recently had to be reconfigured, I want to save my copy again, but cannot locate the registration key! How can I get a key please.

  Please refer to find the serial number of your product Adobe quickly

  Hope this will help you.

  Kind regards

  Hervé Khare