Resources for implementation at a later date

Similar Questions

• My no intel Mac running OS10.5.6 but does not have Firefox 4.0, I'll be able to run it at a later date or my G5 is ready for the cemetery?

  Last update says it does not work on my Mac (see previous question) and the current latest compatible version (3.6.17) will now have a full technical support for only a limited time. Is there anything I can do to put my Mac to the spec. Is it really a dinosaur already? I'll be able to run FF4.0 (or later version) at a later date?

  All responses appreciated, thanks... B

  Ah you have PPC version. Either you can continue to use Firefox 3.6. * are trying a version of third part of Firefox 4.0. * to http://www.floodgap.com/software/tenfourfox/

  The Firefox 4.0 and newer downloads contains the version 32 bit and 64 bit Intel at the time.

• Search for a record at a later date

  Hello

  From this forum, I am able to solve little of my question but not always able to reach the conclusion.

  My requirement is to search the later date in the clob data type and then return records. Dates are available in the format YYYY DD Mon.

  In the example below, I just want these IDS when the variable 'text' contain later date that is available in the text date > current date

  Output must be ID 101, 102 because it contain date > current date

  ID 103 will not come as long as the date (November 19, 2014) < date current (November 20, 2014)

  with abc as

  (

  Select 101 as id, ' Prime Minister arrived in Melbourne for the last leg of his tour of four cities in Australia on March 1, 2014 and April 3, 2100 as the double data

  Union

  Select 102, "The 234/12 advance r1eading of Singapore December 1, 2012, for the third quarter on December 1, 2015, showing no response" of the double

  Union

  Select 103, ' there is no malaria symptom Minister after November 19, 2014 meaning vaccine properly work ' from dual

  )

  Select regexp_substr (data,'[(0123456789)] + [()] + ((Jan) |)) () Feb) | (Mar) | (APR) | (May). (Jun) | (Jul) | (August). (MS) | (Oct) | (Nov). (Dec)) [()] + [(0123456789)] +')

  ABC

  Suggestion:

  FUNCTION to CREATE or REPLACE makeDate (in_string in VARCHAR2
  in_format IN VARCHAR2: = "DD month YYYY")
  date of return
  IS
  BEGIN
  To_date (in_string, in_format) return;
  exception
  When others then return null;
  end;

  /

  WITH abc AS (SELECT 101 AS ID, 'Prime Minister arrived in Melbourne for the last leg of his tour of four cities in the Australia on March 1, 2014-3 April 2100' AS DATA FROM dual
  UNION
  SELECT 102, "The 234/12 advance r1eading of Singapore December 1, 2012, for the third quarter on December 1, 2015, showing no response" OF THE double
  UNION
  SELECT 103, ' there is no malaria symptom Minister after November 19, 2014 meaning vaccine properly work ' FROM DUAL
  UNION
  SELECT 104, ' there is no malaria symptom Minister after 19 Qur'an 2014 sense vaccine working properly ' FROM DUAL
  )
  , date (select id, regexp_substr (data, "([0-9] {1,2} [A-Z] {3} [0-9] {4})', 1, level, 'i'") datestring)
  ABC
  CONNECT PRIOR ID = ID
  AND PRIOR sys_guid() IS NOT NULL
  AND LEVEL<= regexp_count(data,'([0-9]{1,2}="" [a-z]{3}="">
  SELECT a.ID, a.data
  DATE d
  INNER JOIN abc A ON (A.ID = d.ID)
  where makeDate (d.datestring) > sysdate

  /

  Instead of having a WHEN and others-the function you * should * catch possible exceptions.

  I chose to build a to_date function to be able to continue in the case of a bad date.

  HTH

• Creating a second resource for messed up AD right to target AD system

  Hello

  I'm running on IOM 11gr2ps2.  I have a need to run that the announcement of trust reconciliation source and AD target reconciliation system pointing to the same instance of AD, on a daily basis.

  A team member creates a new resource IT (AD target recon system) and set the search so that the resource would be used for the reconciliation of the target system.  Although the idea was good, but the execution did not correctly because unit testing was not performed.  I later discovered that target reconciliation for a given user will no longer display payments (for ad groups).  Reconciliation data shows the ad groups reconciled.  The database displays the correct ad groups.  However, the right tab in the user record was empty.

  When I opened the Application instance, I noticed there were 2 instances of the application to AD.  Instance of the reliable source AD app has a tab named 'Entitlement' with all the values.  However, the application system AD target, right tab instance showed no value.

  How can this be repaired?

  Thank you

  Khanh

  You want to fix the search that has ad groups.  You can clear the list, and then run the task of reconciliation of Group research.  In the scheduled task, use the resource your Recon target is configured for.  Once done, run the scheduled task from the eligibility list and that will also trigger the catalog synchronization task execution and until it is enabled for updates, which will correct.

  -Kevin

• How to send an email at a later date?

  I have e-mails, I want to send at a later date. How to configure Thunderbird to do?
  Wiljea32

  Go to the Add-ons page add and search for send later. This add on Let's schedule you delivery times.

• When you set the iPhone at a later date is it destroys your phone?

  I put my iPhone at a later date to see if I can skyrocket time in a game, he didn't, but a pop-up came on my phone saying something like iCloud didn't return for the weeks 27 and connect your device to a computer and save it. Just wondering if it would do no harm to my phone?

  No, in general there is no damage to the phone. Because you have changed the system date iCould think there has been many days or weeks since the last backup. But there is no saying what processes may be affected if you move the date back. It is best to avoid changing the date system.

• Media Center is planning a record but didn't and defer to a later date.

  Windows XP Media Center 2005 has been in place. 1st symptom was that it would block when calling my TV (usually just sitting on my TV).  Sometimes, he reached the following menu, but will not charge recorded TV or records on demand (just sitting with 'circle' symbol circling).  Discovered that sometimes if I end task through the Task Manager and restart and then not choose my TV but using the shortcut for Live TV I can sometimes get Live TV, sometimes it crashes with 'circle' symbol encircling.  Pointed out that memory almost full (indication AnVir Task Manager).

  After reboot, all usually (not always) is clear and that is running. with Media Center.  After reboot, I sometimes have a monitor that is not turn off as it is supposed to (hard drives are supposed to be off, but I haven't checked that)-requires a reset forever and at 10 min., working for the monitor, but still does not go on standby after 15 minutes.

  All the foregoing is symptomatic with Media Center (usually) works after the restart.  Media Center records sometimes and sometimes does not.  When it does not usually record it defers to a later date, if available, otherwise no recording until then is a guide and it as if by magic reappears, postponed.

  The second tuner (usually used for recording) records while TV Live is on but if scheduled recording is not as long as Media Center is running she sometimes record and this is sometimes not.

  Hello

  See the following article:

  Windows Media Center does not record a show of television as expected when you plan to record the TV program in Windows Vista

  http://support.Microsoft.com/kb/930101

   

  Note: The article above also applies to Windows Media Center on Windows XP.

• Should I switch from Vista to Windows 7 at this late date

  It would serve no purpose at this late date to upgrade my Vista (home &) to Windows 7?  My computer has a lot of capacity and meets all the requirements.  However, I don't know if it would be of no use.  I have to pay if I wanted to a higher Windows?  Thanks in advance. Luana

  It would serve no purpose at this late date to upgrade my Vista (home &) to Windows 7?  My computer has a lot of capacity and meets all the requirements.  However, I don't know if it would be of no use.  I have to pay if I wanted to a higher Windows?  Thanks in advance. Luana

  Hello

  Yes; you would have to buy 7.

  There is no free upgrade to Windows 7.

  There was a special offer to do that a few years back; but this offer has expired for a long time.

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• I have a problem with file compression and then not be able to extract their share at a later date

  original title: file compression

  I am running Vista Home Premium on my laptop. I have problems with file compression and then not be able to extract their share at a later date. For example, I sent a file compressed to my instructor and she pointed out that she had a .zipx extension and the fact that she was unable to extract the files of ranking. Can someone help me with this problem?

  Hello

  1. do you have a third party compression/extraction of software installed on your machine?
  2. do you get an error message when you try to extract the files?
  3. is the relevant question for the particular file type?
  4. don't you make changes to your computer before the problem?

  Follow the steps and check if they help.

  Step 1:

  Open zip files is to open the folder and drag the content to another folder.

  See article:
  Compress and uncompress files (zip files)

  Step 2:

  If you have a third party software to Compress/decompress, I'd Uninstall it employs the way Windows compression and decompression of files/folders and see if they help.

• FAT32, exFAT, NTFS, which is the best for the recovery of deleted data?

  I have a usb 3.0 port (Kingston 100 3 16 GB) to store my important data. I read the article on this site: http://www.ntfs.com/ntfs_vs_fat.htm

  and they say recoverablitity of exFAT is "Yes if FAT active." I don't know what FAT and how to activate it, and what type of file system should I use (FAT, exFAT, NTFS) for the highest ability of data recovery if they are deleted?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of problem, you're ready to recover the deleted data and would like to know some information about the FAT.

  A transaction-safe FAT (FAT) file system is a file system designed specifically to ensure the security of transactions for data stored on a disk. FAT requires a driver of specific hardware designed for the type of media on which the volume of FAT will exist. Assuming that there is a driver of material-specific secure transaction block, and that the driver provides interfaces to standard FAT file system, the FAT may work on removable media such as Compact Flash cards and digital cards secured, as well as media not removable, such as hard drives and NAND Flash memories.

  By design, the FAT file system is not a secured file transaction system. FATF may be corrupted if a write operation is interrupted in the middle of a transaction. Interruptions to occur due to loss of power or the suppression of the media. Fat is corrupted when the content of the FAT table does not have directory sections or data on the volume.

  I suggest you to return the article mentioned below and see if it helps you to recover lost or deleted data on your computer.

  Recover lost or deleted files

  As you disposed him to know FAT and his work, then here are some articles that might help you to learn more about FAT and its function.

  With the help of FAT (Windows CE 5.0)

  How to set up a system of FAT (Windows Embedded CE 6.0) file

  Transaction-Safe FAT File System (Windows IT 5.0)

  Implementation of FAT (Windows IT 5.0)

  Additional information:

  You can see the article mentioned below to learn more about NTFS and FAT32.

  Comparing the NTFS and FAT32 file systems

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• The best location for vcenter VM and placeholder data warehouses

  Hello

  I have an SRM installation with 2 sites.  The sites are separated by metro trunk of layer 2 ethernet between the sites.

  Site has

  1 EqualLogic PS6100

  2 ESX servers configured as cluster

  There is a single data store volume over the San with all virtual machines in this cluster

  There is one instance of vCenter to this place located in the same data as the other virtual machines store

  There are also a few other volumes on the SAN used for the RDM disks in virtual machines

  I also created a small volume of 1 GB as a VMFS data store and have it mapped in SRM to use as a placeholder for a data store

  What are your thoughts on that?  Is this the best way?  I could use the local storage on the ESX servers?  Main VM can be used for fictional settings or my data store?

  SRM is installed on the same VM as vCenter

  MRS. uses SQL Express on the local vCenter VM

  vCenter also uses SQL Express

  Site B

  1 EqualLogic PS4100

  1 ESX Server, so no clustering

  There is a single data store volume over the San with all virtual machines running on ESX Server

  According to the requirements of the SRM, there is a separate instance of vCenter operating as a virtual machine, and it is not in bound mode.  Should it be? / Should it be?

  The number of volumes on the SAN and their goals is the same Site A, the only difference is the size of the volume is smaller because less machines virtual running on this site.

  Replication has been implemented and verified the bi-directional working.

  We use replication on Bay

  OK, here's the problem... When I do a recovery expected, the process stops all the virtual machines on this site that includes the server vCenter/SRM.  I guess that to happen because it's on the same database as my other virtual machines?

  If I run the recovery in emergency mode, vCenter is then moved to the other site and power.  Because the sites are layer 2 and on the same vlan, MRS. watch sites are connected by 2 instances SRM can meet eventhough they are now running on the same site.  This does not seem right to me.

  Can someone suggest a better configuration?

  Thank you

  Brian

  Hello

  There is one instance of vCenter to this place located in the same data as the other virtual machines store

  What are your thoughts on that?  Is this the best way?

  In addition to vCenter VMS residing on the store of data replicated, it's OK.

  I could use the local storage on the ESX servers?

  I think that you can, but it is not recommended, because it creates dependency on the availability of the single ESX host.

  Main VM can be used for fictional settings or my data store?

  I would not recommend this. This will create a mess on the data store. Continue to 1 GB placeholder data store you created and do not replicate.

  MRS. uses SQL Express on the local vCenter VM

  vCenter also uses SQL Express

  Consider that SQL express is adapted to the environment of very small size (don't remember the numbers now). Make sure that you do not exceed the limits.

  1 ESX Server, so no clustering

  There is a single data store volume over the San with all virtual machines running on ESX Server

  This host has sufficient capacity to run all the virtual machines together (Site A and Site B)?

  I recommend having two hosts for prallele and accelerate the recovery process (multiple virtual machines can be powered on simultaneously).

  According to the requirements of the SRM, there is a separate instance of vCenter operating as a virtual machine, and it is not in bound mode.  Should it be? / Should it be?

  You don't have to configure them in bound Mode. This is for ease of management only (license, roles and inventory)

  OK, here's the problem... When I do a recovery expected, the process stops all the virtual machines on this site that includes the server vCenter/SRM.  I guess that to happen because it's on the same database as my other virtual machines?

  Yep, do not put vCenter VM on the VMS data store and reproduce at all.

  If I run the recovery in emergency mode, vCenter is then moved to the other site and power.  Because the sites are layer 2 and on the same vlan, MRS. watch sites are connected by 2 instances SRM can meet eventhough they are now running on the same site.  This does not seem right to me.

  Do not replicate vCenter / SRM VM and that will not happen.

  Michael.

• New cluster or new pool of resources for tier 1 applications?

  Hello

  I have an existing cluster 5 node blade Esxi HP that I put in place for resource pools containing loads of pre-production and production work.  Now, we want to welcome applications from level 1 (Oracle DBs, Weblogic and middleware VMs servers).  Is there a best practice in the establishment of tier 1 workloads?  Should I add additional nodes to the cluster (until 8) and create a separate pool of resources for tier 1 applications, or should I implement a cluster 3 separate node (and generation) devoted entirely to the only level 1 workloads?  What are the advantages/disadvantages of each method?

  Thanks for your comments.

  M

  It depends on.

  (1) that you're going to develop this group even more tomorrow, or after you have added the hosts you have in mind who will be the end of the work?

  (2) how the negative risk is your boss or your client?

  (3) do you run your environment oversubscribed?

  (4) you understand the fundamentals of Resource Pools?

  Since I'm pretty risk adverse, I am tempted to create a new cluster with 4 nodes, where each node spans at least 2 or 4 chassis. Resource pools can resolve the problem of conflict of resources, but adds an extra layer of complexity to an environment that is not always welcome, and can make the diagnosis of difficult performance.

  Since you mention that you run ESXi on blades, please see the following article. I found it very informative regarding the problems of redundant N + 1 with blade configurations;

  http://longwhiteclouds.com/2012/05/13/when-should-N1-not-equal-1-host-with-VMware-HA/

  Kind regards

  Paul

• «Server error [2009]: failure of resource allocation to results «error IR»» data

  Hello

  We recently moved form 9.3.3. to 11.1.2.3 and we run only IR and QAS reports. When we run a few IR reports we get the below error.

  «Script (x): eception exception: Server error [2009]: failure of allocation of resources for outcome data.»

  Any thoughts on what could be the cause. I changed the DSA definition, HTTP settings for timeouts. I followed an oracle knowledge base document to make sure that I put the correct settings, it still does not.

  Any advice will be appreciated.

  Thank you.

  Hello

  Can you please try to increase the parameters of time-out for the workspace and check the issue.

  You can refer the KM article for more information:

  Hyperion Interactive Reporting (IR) during treatment a BQY in the Web Client and iHTML error: "Server Error [2009] Failed To Allocate resources to outcomes data" [1089121.1 ID]

  Try in 11.1.2.x check these settings in the workspace:

  -----------------------------------------------------------------------------

  Please go to navigate-> administer-> Reporting and analysis-> Web Applications-> right click on RA_FRAMEWORK_LWA and select Properties. A
  Window opens. In this, go to the Applications tab and then go to data access Servlet. There are two values it
  (i) Hyperion Intelligence Client to mark Time (seconds) => to zero
  (II) time of response DAS => set this to 3600
  Restart the R & A and WebApp services after this change.

  Hope this information helps.

  Kind regards

  Harish.

• Later date

  You can enter a later date on an e-mail

  Ask yourself if you can prepare an e-mail and then sent her on a date or a time in the future? If that's what you ask, the mail doesn't have this ability.

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)