Responsible for specific campaign of Score model
It's been a few days I took the class of drive rating...
Can someone verify that I can create a scoring model to drive only a specific campaign scores?
Thanks to all who help falling from rust in my mind.
Hi Shane,
There are several ways to do it, but a simple would be to create a contact at the contact level field, use as a criterion in the lead score model to add a contact to be part of the lead score.
Thank you
Amit
Tags: Marketers
Similar Questions
-
Hello
Is it possible to easily view the status of the approval process for a specific campaign without having to open it?
Thank you
Hello
Yes. Campaigns launch area, select open an existing campaign.
Thank you
-
can we create specific diagrams of logic model for the relational model?
Hi-
I created several diagrams of relational model. I want to create the logical data model diagram for each of the relational model.
Is it possible to do?
Currently, it is always associated with a logical data model diagram. When I create LD for the 2nd, it is always update the same diagram.
Please let me know.Hello
Yes you can have the diagram in the logic model. Check there titled "Subview as" at the top right of dialogue engineering - select it and subview will be created in the logic model corresponding to the main schema to your relational model.
Philippe
-
just has got rid of the virus and responsible for all the disks but given the wifi does not work
WiFi doesn't work do not
just has got rid of the virus and responsible for all the disks but given the wifi does not work
Hello
Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
for problems known.Actually, try updating your driver:
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
In bulk API - how to get all contacts that when, in a specific campaign
Hello
I am trying to retrieve all contacts only when a specific campaign ID.
I looked in most activities of the api and it seems that I can not filter the results according to the type of activity: entry campaign.
Basically what I tried and succeeded is to get all the contacts that are in a specific activity as "EmailOpen" type and a specific campaignid.
but I need to extract the results of entry of campaign activity.
is there a way to do this using the API as a whole?
If this isn't the case, I can do it using a different api? or by creating a segment / list based on the entrance to the campaign activity?
10 x,
Eliram
In bulk API will give you feature dataset and data activity (ver 2). Entry into a campaign is not an activity that the contact is made, but it is rather something that you do everything for them - so therefore, that is not a valid activity to expect from the bulk API.
This information is available through REST:
It is used in the operational report "Entry campaign report" under the active campaign options menu. Like all OTHER calls, number of max is 1000. That would be 1 call of the API by campaign, by 1000 responses. Slots are at the time Unix.
-
Is it possible, in messages, the rotation of notifications for specific people or groups of discussion, without disabling notifications for all incoming messages? I sometimes have a lot of messages from my daughter and my phone buzzes away all the time which can be annoying. I don't want to disable notifications entirely or do it on the silence on the other I miss important messages form other people.
You can enable do not disturb on an individual message, but which will shut down the entire conversation if it's a group. This is not the same as activation do not disturb for the phone, which disables all notifications. Open messages, select the message in question, in the upper right, click details and then scroll to the bottom, you should find the switch to do not disturb.
-
Apple is responsible for the content published by the members of this community?
Hello world!
I was wondering if Apple is responsible for the content shared by members of this community? IM asking just out of curiosity, does not intend to prosecute anyone who
Thanks in advance!
Read the terms of use that you agreed to when registering.
-
Original title: copy function
The copy function blocks computer after an item is selected, and the computer is responsible for copy. It does not matter what size is the copy area. It usually requires a reboot hard to use the system.
I tried to follow some of the instructions in a full Clipboard and unfortunately that is not the forms of the English spoken by them.
Any help would be greatly appreciated.
Denver
d2n1cart@hotmail'com
Hello
We are pleased to know that the problem is solved. Let us know if face you any problem with Windows in the future.
-
Original title: usatoday crossword print
Using Vista and an HP C7280 printer a message saying wait while data and graphics are responsible for printing, but it prints ever.
Hello
You are able to print all of the other files stored on the computer?
See the bottom of the articles that might help you resolve this problem.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows -
Disable alerts for specific volume?
One of my servers monitored with Foglight SQL has a volume that is only used for TempDB. The size configured for TempDB use about 97% of the storage on the volume. Thus the agent host continuously generates an alert.
My question is what is the best approach to prevent any warning of this host for that particular volume while impeding is not the agent of database to continue to monitor the TempDB?
Thank you.
Hi NewUser
Please take a look at en.community.dell.com/.../19558825 and en.community.dell.com/.../19558825 that detail how you can use the registry to change alerts for specific volumes.
Brian
-
Simple disk alert for specific servers
Hi all
Can someone tell me how to alert of simple disk for specific virtual machines please? That is to say if Server X drive E:\ hits 20 GB free, send an e-mail.
I tried to change the rule VMW Virtual Machine, use of logical disk , but I can't limit the scope to specific servers I want to follow. Very confusing.
VFoglight v6.6.2 using.
Thanks in advance.
You can change the call to the scope to include only the specific virtual machines.
You can test this concept in the Script Console, using the query line. Don't forget that everything is case-sensitive.
First, enter VMWVirtualMachine , and then select query. You should see all your virtual machines
Then, enter VMWVirtualMachine where name like '% ServerX' and you should get only back the corresponding VMs. You can extend this to help where and not built. for example VMWVirtualMachine where (name like name like '% ServerY' or 'ServerX %') once you're comfortable with that, we can take the step 2. The '%' is a wildcard character, corresponding to a number any character.
Now, let's take a look on your particular case, which is a little more complicated, because the name of the virtual machine is not directly part of the object VMWVirtualMachineLogicalDisk .
We need to start with VMWVirtualMachineLogicalDisk as our base and then extend it.
Still in Script Editor, enter VMWVirtualMachineLogicalDisk in the query line and select query. You should see a large number of records of logical drive. By selecting one of them and selecting the tab panel object below will show you some of the properties of this object.
Then, enter VMWVirtualMachineLogicalDisk where name like '% C:' and select query. You should see a small list, showing only C: drives.
That's nice, but as the name property of the VMWVirtualMachineLogicalDisk object is the drive letter, not the name of the virtual machine, it does not help your case.
The trick is to remember that these are objects, not rows in a table SQL. And there's a handy article on the object called parentsmodel. You can see by scrolling down through the selected properties of VMWVirtualMachineLogicalDisk , until you see relatives. It is a link to the top of the object tree and can be used to select what need you.
Enter VMWVirtualMachineLogicalDisk, where parents.name like "ServerX %", and you should see just logical drives for the selected virtual machine. Again, you can build more complex criteria. In addition, you should be aware that in certain types of objects, parents is not one, but a list of items (e.g. warehouses under the ESX hosts, where a data store can be a child of many ESX host.) The query in this case would be built in a different way, to deal with several possible outcomes.
OK, so now we are ready to make your new rule. You NEVER want to change a standard rule, you should always copy rule, if necessary, the deactivation of the original.
Copy rule VMW Virtual Machine, use of logical drive to a new rule and go to the tab of the rule definition.
Under scope rule, you will see VMWVirtualMachineLogicalDisk in the largest area. This can be entered in the menu dropdown just above him, but it can also be added to by typing directly into the larger area.
Change the biggest box of VMWVirtualMachineLogicalDisk to VMWVirtualMachineLogicalDisk, where parents.name like '% ServerX' and test the scope of the rule with the little green check mark on the side.
In green text, you shuold see that your scope has been changed to the desired list of virtual machines.
Don't forget to press on save, very important
-
Looking for specific files of the .bkf. Is this possible?
I have an external drive on which I had saved the entire desktop. Desktop is dead (without power on/off switch) and now have a new laptop. Looking for specific files of the .bkf. Is this possible? If this is not the case, how can I 'restore' old office files to new pc? XP on desktop and laptop.
What are the Windows Vista forums. Please repost your questions in the forum XP here: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp.
-
Who is responsible for the background - Polska Nature photographer
Who is responsible for the screen - POLSKA NATURA backbround photographer
Hi Frank,.
Thank you for visiting Microsoft Community and we provide a detailed description of the issue.
According to the description, I understand that you want to know who is the responsible substantive photographer of POLSKA NATURA screen on the system.
Certainly, I understand your concern and will try my best to help you.
In order to understand the issue more clearly, I would ask that kindly provide me with the following information.
What exactly is the problem you are having on the system?
Do you receive an error message? If Yes, what is the exact error message and the error code?
You did changes to the computer before this problem?
In order to have a better understanding about the issue, I suggest you to provide us with the photos screen if possible. Please see the article below.
How to include a screenshot in your message
Please provide the above information for assistance.
We will be happy to help you.
Thank you.
-
Firefox is responsible for the liaison between eBay and Paypal failure?
It's the third time recently that the link between eBay and Paypal failed. On each point, I tried to buy it, the "Pay now" button is, I click on it... and I'm 'time Out' ed. Over and over again. No matter if I click on the page of the article, MY EBay or "purchase history". The previous two points got finally adjusted and eBay implied that sellers had forgotten to complete a sequence to an end, I don't think. I have no trouble paying with Paypal on other sites and there is money in the account that you use to pay for. On the pages of 'Time Out' going up, it is suggested that Firefox may be responsible for somehow, so in desperation to this third moment of the break, I thought I'd ask, if I can hardly believe that it has nothing to do with you. If you can help, please do?
Hi, just a guess here, but try to disable McAfee WebAdvisor in your extensions (Ctrl + Shift + A).
If it is not, remove any reference to eBay and Paypal, as described under the heading "How to remove a single website to my story?" in this article - delete navigation, search and download history on Firefox, then try again (not related to an old favorite). Note: It may take a few minutes to complete the removal.
If your question is resolved by this or another answer, please take a minute to let us know. Thank you!
-
How to give Admin rights for specific applications in windows 7 Stater
How to give Admin rights for specific applications in windows 7 Stater
I have a problem in Windows 7 Stater PackI do not know where to place the issue or create the question
My problem is that I can give admin access to application specific to Windows 7 stater
in fact I use photon AUNTIE I want to be accessed by a Local user Standard user is not an admin user
Once I click on the icon of Photon to connect it always ask for admin password.
I want to work on a local user without admin password
Please help about this.
Thank you.
Hello
Note: To be logged in as an administrator or enter creditionals administrator account to make changes
Method 1:
The prompt that you get is the setting on your computer user account control. You can change the setting and use them according to your requirements and run programs in the standard account. See the below links for more details-
http://Windows.Microsoft.com/en-us/Windows7/what-is-user-account-control
http://Windows.Microsoft.com/en-us/Windows7/what-are-user-account-control-settings
WARNING: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.
Method 2:
You can even use the steps below and check-
1. right click on the program file , click on Properties.
2. now click on compatibility and select run the program as administrator.
3. now click on change settings for all users and click ok. Now, check to see if the problem resolves.
I hope this helps. Let us know the results
It may be useful
Maybe you are looking for
-
Laptop stopped working a week ago. Beep code (3 blinks) indicates the memory. Can't turn it off, have to remove the battery, as starting goes into cycle of three attempts, then a click and noise from drive HARD winding down and then tries to start ag
-
Used Thinkpad T520 - should I buy?
Hello I intend to buy a used laptop (since I can't really afford a new, at least not a good). I found a good deal on ebay on a used Thinkpad T520, that is still under warranty by Lenovo. I want to buy it, but when I google a bit on this model, I came
-
BearShare does not... BearShare is stopped correctly.
My operating system is Windows Vista - Home Premium... Problem event name: AppHangB1... BearShare has stopped properly... BearShare does not.
-
Dear friends, I am struggling to dial any phone number. When I press on the symbol of the dial, it immediately returns the error message 'arrested contacts' - ' o is parou - in Portuguese.I already tried to clean the cache and the data of all the app
-
Windows stop function on some time and also gel? My window library stop functioning? Windows is running so slow. so, what should I do? can someone help what to do?