Restart or read courses at first and not last page
We have a course with a questionnaire which must be passed.
If the user does not pass must relaunch the course in order to randomize the quiz questions. We noticed that the course is the reopening last police page.
\is there a way to force a project to open ONLY on the first page anywhere - off left? I realize that this would be unnecessary if the user also left having to start
I think this is a job for a table of contents page, but can't think how
help appreciated
It is a SCORM file to load on an LMS, you must check the 'Never resume data' option under the Advanced button in the reports dialog box:
If it is not transferred to an LMS, and you use the table of contents and biscuits or local storage for bookmarking, you will need to uncheck learning self-paced option in the parameters of the table of contents. But this option is cancelled by the LMS functionality if you publish a LMS.
Tags: Adobe Captivate
Similar Questions
-
Original title: Question of impression
It is a new problem; I printed documents several pages in the past without problem. When you print multiple pages on my Office Jet 8000, first & last pages are not bad, but the Middle pages are too weak to read. I initially set for last page of print jobs. Test pages are fine. I am using genuine HP 940 X cartridges. I print only 'black '.
M.
You should contact HP since it is certainly a printer problem. We support the MS software & hardware here.
-
It is possible to select more than one layer by selecting the first and the last layers?
I frequently get Illustrator files which are individual objects such as the paths on separate layers that can be grouped together to make the shorter layers. I find that I have to change click on each individual layer to select it to finally bring together them. Sometimes, I have 25 or so layers that I need to select. Is there a way to select the first and the last layer in the layers palette and have Illustrator select all the layers in the meantime?
Don't know about the selection of layers of first/last, but to select several consecutive layers in the layers palette...
Option-click on (Mac) on a layer to select it and, with the option always pressed key, drag to the bottom of the list - DO NOT slip on as logical target icons you like. When you drag to the bottom of the list of layers, the icons of the target will become selected.
Shift + Option-click allows you to ignore the layers and continue to select consecutive additional layers on the bottom of the palette.
Note: Drag slowly or some layers would not choose.
Strange, I know. It took me years to come across this.
-
Grep - between the first and the last tab
My data is in the following format:
Sku. . . . . . . . Description.... $xxx.xx ea.
I have a paragraph style that puts in the tab stops and makes the text bold. I need "BOLD" to apply only to the reference and the price. I need items description and leader to be regular.
If I put a grep style to apply a style to regular characters to tabs, it almost works. Leader points are regular, but the description still in bold.
How can I set up a grep style to find between the legs of the first and the last, all the up to the first tab and also after the last tab?
Notes:
The Sku can be of variable length and can include alpha and numeric characters.
The price may or may not begin with the character $, may or may not have shown cents, may or may not be followed by text for the unit of measure (i.e. ea = each, PR. pair =, etc., or can be empty)
\t.+\t is everything between the legs of the first and the last.
Peter
-
Date of the first and the last of the week
I have a date that is
dates week_no
---------------- -----------------
1 JULY 09 ' 26
I want to take the first and the last date of the week in which my date (1 July 09 ') exists, this means
I want to catch the first date of the 26th week and the last date of the 26th week.Not sure what is your first day of the week, but in any case, you can change
SQL> select dt, trunc(dt,'iw') monday, trunc(dt,'iw') + 6 sunday from ( select date '2009-07-01' dt from dual ) / DT MONDAY SUNDAY ---------- ---------- ---------- 01.07 2009 29.06 2009 05.07 2009
-
Hide the first and the last Division in the WPF chart axis
I want to hide the default marker of the first and the last major division in an axis of a chart of WPF. I tried to extend RangeDivisionsMode and define my own class object to the MajorDivisions.Mode property on the axis. But even when I returns a list empty in RangeDivisionsMode.GetDivisions
(...) , the first and the last marker is drawn.Thanks in advance, Jonas
The minimum and maximum labels are transmitted separately when displaying a scale (even if technical
RangeDivisionsMode
custom can be used for the minor divisions).There is no direct configuration option to hide extreme labels, but you can achieve this effect by initializing the
LabelPresenter
property onMajorDivisions
by a custom implementation:class CustomFormatter : GeneralValueFormatter {
protected override UIElement VisualizeCore
( TData value, ValuePresenterArgs args, UIElement existingVisual ) {
UIElement element = base.VisualizeCore
( value, args, existingVisual ); var axis = (Axis
)args.Context;
Range
range = axis.Range;
var comparer = range.Comparer;
bool isExtreme =
comparer.Compare( range.Minimum, value ) == 0
|| comparer.Compare( range.Maximum, value ) == 0;
element.Opacity = isExtreme ? 0.0 : 1.0;
return element;
}
}
-
How to recover/find only the FIRST and the LAST members in a Dimension using Maxl
Hi all
I have a requirement where in I need to retrieve only the FIRST and the LAST members of the Dimension of the year.
For example my year round Sun having EF07, AFA 08 FY09, FY10 as members so I need to get the first (EF07) & the last members (FY10) using maxl.
Is it possible in Essbase Maxl accehieving meanings.I have a custom cdf to find members of the first and the last, if you are interested.
See you soon
John
http://John-Goodwin.blogspot.com/ -
itshow msg
Insert the disc pls
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html===============================================================
Check with Toshiba support, their drivers online (update or reinstall) and their forums.
Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Why my message a confirmation of reading on a device and not the other?
I use my iMessage on my iPhone 5 and my Macbook Air, however, sometimes when I send a message from a device it shows a read receipt to the other person on my mac, but not on my iPhone. The message on my iPhone remains as "delivered" much later and then seems to be read (I'm done yet receive confirmations of reading on my phone), but my mac delivers the message, and it seems that the message has been read afterwards, but it shows the path of the read receipt before my iPhone don't. I don't know if it's just one little problem and they have not actually read the message, or if my mac book is somehow showing the first read receipts?
Hello
It has to do with which ID is used to send the iMessages and what devices are then synced to see this info.
Device sending roughly see the pronouncement to feedback.
If it's the Mac using the Apple ID it will 'see' the 'read' first response.
However, if the Mac uses the iPhone number to send, then some info can run on the iPhone first it's the device the number belongs to.
The Mac is only then light "Copies" of the synchronization version.
Add to that the fact that some people will have a device set to join read receipts and not another.
It is basically not a precise answer that there are many factors that can influence it.
20:45 Thursday. 26 May 2016
iMac 2.5 Ghz i5 2011 (El Capitan)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
iPhone and iPad (2) -
How to print first page first, not last page first? HP Office jet 6700 Permium
I have this "HP Officejet 6700 Premium and I want to know I can get it to print the first page first instead of print last page first or even to print two pages on a short note paragraph only.?"
Hi Majeski,
Thank you for your answer!
On your desktop, you will have an icon HP. Must say HP solutions Center, or it could be the name of the printer. Double-click on it, then select Preferences defined, make sure you are on the tab layout, you can change the order of Page from front to back or back to the front. Please see the pictures below as examples:
Hope this clears things up for you and have a great day!
-
I have a Photosmart D110 all-in-one and you just bought an Asus Transformer tablet. I downloaded the eprint application and whenever I share a page of a Web site by email to my email address printers that it prints only the URL not the current Web page. Also when I click on the share option it gives me the opportunity to share with the eprint application, but when I do it says it can not read or supports the file due to the size of the paper is not selected.
Hello
The HP ePrint does not support pages web impression
Printing Web pages through email is currently not supported. HP is in the process of developing solutions to support Web page printing for mobile devices.
http://support.HP.com/us-en/document/c03721293
You can print web pages using the HP ePrint home & Biz using his web browser integrated application:
http://support.HP.com/us-en/document/c01616126
Kind regards
Shlomi
-
Select records of first and the last in the Group results - Oracle 11 g
I have the following information in the Oracle 11 g table:
Qty. Production order Date and time 20 00000000000000001 12 JANUARY 14 00:02 20 00000000000000001 12 JANUARY 14 00:05 20 00000000000000001 12 JANUARY 14 00:07 20 00000000000000001 JANUARY 13, 14 00:09 30 00000000000000002 12 JANUARY 14 00:11 30 00000000000000002 JANUARY 12/14 00:15 30 00000000000000002 12 JANUARY 14 00:20 30 00000000000000002 14 JANUARY 14 00:29 I here to write a query that returns the following:
Qty. Production order First Last 80 00000000000000001 12 JANUARY 14 00:02 JANUARY 13, 14 00:09 120 00000000000000002 12 JANUARY 14 00:11 14 JANUARY 14 00:29 Is the sum of the Qty. grouping column by Production order and the time of the first and last records for each Production order .
I came up with a query that gave this result:
Qty. Production order First Last 80 00000000000000001 12 JANUARY 14 00:02 14 JANUARY 14 00:29 120 00000000000000002 12 JANUARY 14 00:02 14 JANUARY 14 00:29 Wwhich means that the and last columns show the first and last date / time the whole table. Please note that there is a shadow table. Sorry, I am now allowed to write the actual query
, I came with given work policies don't allow me to share. Also, I tried with windowing functions such as rank()and row_number() but my user has not enough privileges to do so.
Help or advice will be greatly appreciated.
Due to the fact that Oracle does not have the lines in a particular order, it would be wrong that the first 'date' would be the first line to be processed by the query.
So, you will need to provide another column if you do not want to look at the table as ordered by date.
Any analytic function must also allows you to provide the 'to' and if that's the date, then just a simple query:
SQL > WITH Tab1 (quantity, Production_Order, patch)
2 ALSO (SELECT 20, '00000000000000001', TO_DATE (12 JANUARY 14 00:02 ', 'DD-MON-YY HH24') FROM DUAL UNION ALL)
20. SELECT 3, '00000000000000001', TO_DATE (12 JANUARY 14 00:05 ', 'DD-MON-YY HH24') FROM DUAL UNION ALL
4. SELECT 20, '00000000000000001', TO_DATE (12 JANUARY 14 00:07 ', 'DD-MON-YY HH24') FROM DUAL UNION ALL
20. SELECT 5, '00000000000000001', TO_DATE (13 JANUARY 14 00:09 ', 'DD-MON-YY HH24') FROM DUAL UNION ALL
6. SELECT 30, '00000000000000002', TO_DATE (12 JANUARY 14 00:11 ', 'DD-MON-YY HH24') FROM DUAL UNION ALL
30 SELECT 7, '00000000000000002', TO_DATE (12 JANUARY 14 00:15 ', 'HH24 LUN-JJ-AA') OF ANY UNION DOUBLE
8. SELECT 30, '00000000000000002', TO_DATE (12 JANUARY 14 00:20 ', 'DD-MON-YY HH24') FROM DUAL UNION ALL
9 SELECT 30, '00000000000000002', TO_DATE (14 JANUARY 14 00:29 ', 'DD-MON-YY HH24') FROM DUAL)
10. SELECT SUM (Qty), Production_Order, MIN (update), MAX (updated)
11 OF Tab1
GROUP of 12 BY Production_Order
13 * ORDER BY Production_Order
SQL > /.
SUM (QTY) PRODUCTION_ORDER (PDATE) MIN MAX (PDATE)
---------- -------------------- ----------------------------- -----------------------------
80 00000000000000001 12 January 2014 00:02:00 January 13, 2014 00:09:00
120 00000000000000002 12 January 2014 00:11:00 January 14, 2014 00:29:00
-
Get the first and the last day of the month...
Hi friends,
I'm trying to get the first and last day of a month and wants to implement that in the following code:
SELECT COALESCE (Date_A, Date_B, Date_C)
OF the double
Here Date A and B are in Format DD MM YYYY (March 14, 2008)
and Date like MM YYYY (March 2008)
How can I get the Date_C as of March 1, 2008, OR March 31, 2008 if Date A and B are NULL?
Thank you!
Published by: user11095386 on April 23, 2009 10:45Hello
In my previous message, I thought that you were starting with strings like ' 03 12 2009"and you want to display in the form of" 12 March 2009'.» If what you have is just the opposite, then simply reverse strings format in my first message. Add a comma, if you want, in the format string.
I think that's what you want:COALESCE ( TO_CHAR ( TO_DATE ( Date_A, 'fmMonth DD YYYY'), 'MM DD YYYY') , TO_CHAR ( TO_DATE ( Date_B, 'fmMonth DD YYYY'), 'MM DD YYYY') , TO_CHAR ( TO_DATE ( Date_C, 'fmMonth YYYY'), 'MM DD YYYY') )
Notice how, on the 3rd line, TO_DATE is called without DD in the format string:
TO_DATE ( Date_C, 'fmMonth YYYY')
When you do so, by default the day the 1st of the month, so that's all you need to do to convert the VARCHAR2 'March 2009' at the DATE of March 1, 2009.
If you would like the last day of the month, not the first, when Date_C is selected, then use LAST_DAY:
COALESCE ( TO_CHAR ( TO_DATE ( Date_A, 'fmMonth DD YYYY'), 'MM DD YYYY') , TO_CHAR ( TO_DATE ( Date_B, 'fmMonth DD YYYY'), 'MM DD YYYY') , TO_CHAR ( LAST_DAY ( TO_DATE ( Date_C , 'fmMonth YYYY' ) ) , 'MM DD YYYY' ) )
-
Drive function and the values of the first and the last line in a group game
Hello
I have a data as below, where I need to take the start_date line first and last row End_date a group in an order.
Actual data:
SU_KEY ORG_TYPE SAL_TYPE START_DATE END_DATE
28033 UN UNITED NATIONS 29/08/2003-07/11/2003
28033 UN UNITED NATIONS 08/11/2003 05/12/2003
28033 UN UN 06/12/2003-10/12/2003
TE TE 28033 11/12/2003 03/03/2004
TE TE 28033 04/03/2004 08/03/2004
TE TE 28033 09/03/2004 11/03/2004
TE TE 28033 12/03/2004 16/07/2010
28033 UN UNITED NATIONS 17/07/2010-17/11/2011
28033 UN UN 18/11/2011-15/07/2013
28033 UN UNITED NATIONS 16/07/2013-05/08/2014
28033 UN UN 06/08/2014 12/31/9999
Result:
SU_KEY ORG_TYPE SAL_TYPE START_DATE END_DATE
28033 UN UNITED NATIONS 29/08/2003-10/12/2003
TE TE 28033 11/12/2003 16/07/2010
28033 UN UNITED NATIONS 17/07/2010-31/12/9999
So far, I could do the following:
SELECT A.START_DATE,
A.end_date
, LEAD (A.end_date) OVER (PARTITION BY A.su_key order of A.start_date) ACTIVE_TO
, LAST_VALUE (A.END_DATE) OVER (PARTITION BY A.END_DATE ORDER A.SU_KEY) B1
A.ORG_TYPE
A.SALARY_TYPE
TABLE. XXXXX HAS
Any help is really appreciated. Thanks in advance.
with
actual_data as
(select 28033 su_key, a 'org_type, a' sal_type, to_date start_date (' 29/08/2003 ',' dd/mm/yyyy'), to_date('07/11/2003','dd/mm/yyyy') end_date Union double all the)
Select 28033, 'ONE', 'ONE', to_date (' 08/11/2003 ',' dd/mm/yyyy'), to_date (' 05/12/2003 ',' dd/mm/yyyy') in all the double union
Select 28033, 'ONE', 'ONE', to_date (' 06/12/2003 ',' dd/mm/yyyy'), to_date (' 10/12/2003 ',' dd/mm/yyyy') in all the double union
Select 28033, 'YOU', 'TE', to_date (' 11/12/2003 ',' dd/mm/yyyy'), to_date (' 03/03/2004 ',' dd/mm/yyyy') in all the double union
Select 28033, 'YOU', 'TE', to_date (' 04/03/2004 ',' dd/mm/yyyy'), to_date (' 08/03/2004 ',' dd/mm/yyyy') in all the double union
Select 28033, 'YOU', 'TE', to_date (' 09/03/2004 ',' dd/mm/yyyy'), to_date (' 11/03/2004 ',' dd/mm/yyyy') in all the double union
Select 28033, 'YOU', 'TE', to_date (' 03/12/2004 ',' dd/mm/yyyy'), to_date (' 16/07/2010 ',' dd/mm/yyyy') in all the double union
Select 28033, 'ONE', 'ONE', to_date ('2010-07-17', ' dd/mm/yyyy'), to_date (' 17/11/2011 ',' dd/mm/yyyy') in all the double union
Select 28033, 'ONE', 'ONE', to_date (' 18/11/2011 ',' dd/mm/yyyy'), to_date (' 15/07/2013 ',' dd/mm/yyyy') in all the double union
Select 28033, 'ONE', 'ONE', to_date (' 16/07/2013 ',' dd/mm/yyyy'), to_date (' 05/08/2014 ',' dd/mm/yyyy') in all the double union
Select 28033, 'ONE', 'ONE', to_date (' 06/08/2014 ',' dd/mm/yyyy'), to_date (' 31/12/9999 ',' dd/mm/yyyy') of double
)
Select su_key, org_type, sal_type, min (start_date) start_date, max (end_date) end_date
from (select su_key, org_type, sal_type, start_date, end_date,
ROW_NUMBER() over (partition of su_key order of start_date)-
ROW_NUMBER() over grp (partition su_key, org_type, sal_type order of start_date)
of actual_data
)
Group of su_key, org_type, sal_type, grp
order of start_date
SU_KEY ORG_TYPE SAL_TYPE START_DATE END_DATE 28033 UNITED NATIONS UNITED NATIONS 29/08/2003 10/12/2003 28033 YOU YOU 11/12/2003 16/07/2010 28033 UNITED NATIONS UNITED NATIONS 17/07/2010 12/31/9999 Concerning
Etbin
-
Extract the first and the last Date of the previous month
This seems to be a delicate but again it is perhaps easy for some of you people.
Here is how I find the previous month
Any ideas on how to get the first and last date of the previous month?
Thanks in advance.Hello!
SQL> SQL> select last_day(add_months(sysdate,-1)) from dual; LAST_DAY -------- 28.02.10 SQL> select trunc(add_months(sysdate,-1),'MM') from dual TRUNC(AD -------- 01.02.10 SQL>
T
Maybe you are looking for
-
When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please
-
Time capsule - remove 1 of 3 backup sparsebundle files
I have a Time Capsule with backup sparsebundle 'files' from 3 different computers. Only 2 of these computers are still in use and I want to remove the other we need more free space on the Time Capsule. Any guidance?
-
How can I find a version of fire FTP running on 3.6
I upgraded to FF4 and it is locked up on my Vista desktop. Unfortunately, fire FTP also had upgraded to the version that is compatible with 4, and now I can't find the fire FTP version which is compatible with 3.6 which I returned to. I need this uti
-
TosOBEX.exe eats my memory
HelloI am currently using the Toshiba bluetooth stack, which came with the billionton Dongle BT to manage my BT connections. The BT manager works fine, but I have noticed that TosOBEX.exe eat my memory causing my PC to run slowly. I thought that this
-
CD / dvd drives will not read / write to any disk
Hi, can someone help (first timer) I have two cd/dvd drives will read / write to disk get them all is a window pops up asking me to insert the disc. all my drivers are up to date, my Device Manager shows two active drives and works correctly, I use s