Restart the node Manager and activate the dynamic record... HOW?

Similar Questions

• You can make a video of your desktop? I have to make a tutorial for my work, and I need to record how a program works

  You can make a video of your desktop? I have to make a tutorial for my work, and I need to record how a program works

  Thanks guys,.

  I have a PC, so I'll try Camstudio.

  Thank you!!!

• every time I have try and watch a pdf file I get this message - before displaying PDF documents in the browser, you must start Adobe Reader and accept the end user license agreement, and then quit and restart the browser.  How can I do this?

  Help, please

  I found the solution on a very old web site.  Start the application and press tab & enter.

  That's it.

• Steps to install and configure Node Manager on the local machine and remote

  Hello
  
  I'm using WLS 10.3 on Windows.
  I did the following till now.
  
  (1) installed WebLogic 10.3 on one machine (local computer, on which I created the field and my Server Admin is under execution. 1 managed server is also created on this machine).
  (2) installed WebLogic 10.3 on computer B (remote computer, which Managed Server 2 will be created).
  (3) on the machine, I used the Setup Wizard and create a domain. When creating the domain, I did the following:
  (i) created two managed servers.
  (II) create a cluster
  (III) the servers assigned to regroup.
  (IV) created two machines.
  (v) the servers assigned to machines (Admin Server and MS_1 to the machine and MS_2 machine B).
  
  (4) start Admin Server.
  (5) on the administration Console, I made some configurations for the node Manager on Machines-> Machine A-> Node Manager. The assigned values:
  (i) type (SSL)
  (II) Address (ip_address machine A) listen
  (III) listening port (5556)
  (6) in the same way it did for Machine B.
  
  So far, phsically the managed server (MS_2) directory and configuration is not there on the Machine B (its only configured on A computer because I created the field on computer A).
  
  I went through the documents on the Node Manager and found what to configure. But I have not found what is the sequence of configuration.
  
  Please let me know the sequence of steps I must follow to install and configure the Manager of nodes on the local and remote machine. I want to use Java Node Manager (not the Script node Manager).
  
  Thank you
  
  Sanjay

  Hello Sanjay

  Basically if I understand your question, you have A machine where you had installed ""(permet de supposer admin serveur) and "VAS_MS1_A VAS_ADM_A" (lets assume the managed server.» And on the second machine B you want to create a managed server 'VAS_MS2_B' which must be controlled by node manager, so that you can start console, auto restart the managed server and perform other activities such as the migration of servers using nodemanager. If this is correct, this is the sequence of steps.

  Since you say you are on windows, I start from the principle

  WebLogic version 10'3
  BEA_HOME:-c:\bea
  WL_HOME:-C:\bea\wlserver_10.3
  DOMAIN_DIR:-c:\VASDomains

  Machine has

  (1) install the BEA.
  Using 2 Setup Wizard) create the domain under "c:\VASDomains".
  (3) to start the Admin Server and connect to the console and create two machines "Machine_A" and "Machine_B". Select the types of machines as 'other '.
  (4) once machines are created go to each machine and go to the tab 'NodeManager' and enter the details nodemanager.
  (5) create server 'VAS_MS1_A' and 'VAS_MS2_B '. Enter the respective details. To "VAS_MS1_A", enter a machine name of host or ip and machine "Machine_A" and "VAS_MS2_B", enter the hostname of the machine B or ip and machine 'Machine_B '.

  Machine B

  (1) on this machine install BEA
  (2) then you have to register the machine with the Manager of nodes. So for this first set the environment go to "C:\bea\wlserver_10.3\server\bin" and run "setWLSEnv.cmd". Then type 'java weblogic. Enter the WLST", once you run this command at the next prompt Details ' connect ('', 'adminserverpassword','t3: / / adminserver:port" ")
  (3) then run this command.
  nmEnroll('c:/VASDomains','C:\bea\wlserver_10.3\common\nodemanager')

  Orders above fits machine with nodemanager. The first parameter is "domestic field", now if you see "c:\". ' directory 'VASDomains' will be created. Second parameter is nodemanager House, now if you go into nodemanager houses that some properties will be updated.
  (4) If this node Manager runs on this computer, kill that one and restart the node Manager again.
  (5) now if you go to "Adminconsole--> Machines--> Machine_B--> Monitoring" you can see the status as accessible.
  (6) now you can go "Servers--> VAS_MS2_B--> Control" and start the server. Newspapers to see how the server gets up the tail.

  If you want more details on "nodemanager", dedicated to my 'vasweblogic.blogspot.com' blog, not a lot of messages but post nodemanager can help you.

  I hope that's what you're looking for, have a nice day.

  Naour Vijay.

• From server managed by using the Node Manager command line

  Hello
  
  I have configured the Node Manager and it is connected to the administrator of the server without problem. Now, I wanted to start the server managed through the console but it is a failure and my guess is that the syntax of the command line used is not correct.
  
  My question is, how do I change the command line used to start the Node Manager-managed server? I try to use the configuration tab start the server and it seems that does not. I also try to update the file .properties for the managed server.
  
  Whenever I look at the managed server logs, it gives me this line...
  
  NodeManager > < start WebLogic server with command line: <>...
  
  The command-line in newspapers aren't what I put in the .properties file or on the Server Start tab. She is from somewhere and I don't know where. I just want to set up the command line Node Manager uses to start a managed server.
  
  If all goes well, I'm clear with my problem and someone might be able to help. Thank you.

  You can try to follow the Option-2) mentioned in the link below: http://jaysensharma.wordpress.com/2010/03/26/nodemanager-based-managedservers-setting-mem_args/

• Windows media player burninhg music to a disk error "connect a burner and restart the player."

  I have music in the list pane (the pane on the right side of the Player library). The start of the burn button is grayed out. below it says connect a burner and restart the player. How can I burn a cd?

  Hello

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows/burn-CD-DVD-Media-Player#1TC=Windows-7

  ImgBurn is a free software

  http://ImgBurn.com/

  You will find here burning guides

  http://Forum.ImgBurn.com/index.php?/forum/4-guides/

• Can I run more than one Node Manager by machine?

  EIS,
  
  We have a situation in our project, where we need to run different areas on a Solaris machine in modes different from java.
  Domain1 say must be running in the 32-bit version of java while Domain2 should be run in 64-bit mode because of the nature of the tests currently underway in different areas.
  We could successfully get both running in different modes of java at the same time by changing the startup scripts to decide what data model South to start the servers based on some parameters. However, the pain here is with the node Manager.
  
  I believe that there should be a Node Manager running by the machine for all areas currently running on this computer. Whenever I have to run a different mode than what Node Manager domain runs on java, so I had to kill the node Manager and launch it in the same version that I want to start other servers in as Node Manager uses his departure parms internally to start managed servers (Note: there is no problem in running the administration server regardless of the node as expected Manager mode).
  
  Can someone tell me if there is a way around these problems?
  I want to know if we can run more than one Manager node by machine.
  
  Here are the details of my approx.
  
  WebLogic Server 10.3
  Solaris 10 SPARC 64 bit (SunOS 5.10 Generic_142900-14 sun4v sparc)
  Java version "1.6.0_20.
  
  Hope that all makes sense...
  
  See you soon,.
  Satish.
  
  Published by: apsnaidu on March 15, 2013 15:29

  Running multiple NodeManagers with different settings on the same box: -.

  http://Tim.blackamber.org.UK/?p=797

• Node Manager does not restart the WebLogic servers when the computer starts

  Hi all
  
  I'm testing the new WebLogic Server version as well as of new forms and reports. I don't have much experience with WebLogic (using the Internet Oracle 10g Application) bare with me for a moment.
  
  I'm using Node Manager to start admin server and all the other managed servers. I also installed nodes as a Windows service manager and configured the boot parameters to include Xrs-/-Xnohup, as stated in the documentation and everything seems to work fine until I restart the server. Node Manager service starts and according to his diary, he plays startup.properties of each server, but it does not start them. Am I missing something here? I found myself in an impression that Node Manager must restart the server in case of reboot system, if the server was running when the computer has been restarted.
  Even though I don't have much experience with WebLogic, I'm not a beginner. I managed to migrate (for testing only) all the business application (more than 1000 forms and reports) of iAS 10g to the new version in two days. Application works very well and I only have problems with servers to start when the computer starts using Node Manager.
  
  Test environment:
  Windows 2008 Standard 32-bit
  RAM: 2 GB
  HARD DRIVE: THE 140 GB
  CPU: 2xXeon

  # nodemanager.properties
  ...
  CrashRecoveryEnabled = true
  ...

• Activate the Debugging Node Manager using WLST

  Hello
  
  I would like to turn on debugging for Manager node using WLST to instead of using the administration console - by selecting the checkbox for "Debugging enabled" property under environment > Machines > Configuration > Node Manager in the administration console.
  
  I could find the name of the MBean 'NodeManagerMBean' and 'DebugEnabled' property, but I don't know how to add script.
  
  Anyone can guide me please?
  
  Thanks in advance
  
  Published by: vikascv on April 29, 2009 09:23

  Here you go
  Activate the Debugging Node Manager using WLST
  http://www.togotutor.com (Learn the programming and Administration for free at the Togotutor)
  ****************************************************

  def connection_to_Admin():
  Try:
  Connect (username, password, URL)
  except wlst. WLSTException, ex:
  print ' an exception during the connection: %s ' % ex
  Another thing:
  Print "-connected successfully! ---------"

  connection_to_Admin() #Calling the function of connection

  Edit()
  startEdit()

  CD('/machines/MS1/nodemanager/Machine_1')
  cmo.setDebugEnabled (true)

  Activate()

  Thank you
  Togotutor
  http://www.togotutor.com (Learn programming and free Administration)

• DCOM98 UPDATE AND RESTART THE OFFICE MANAGER

  PLEASE INSTALL DCOM98 UPDATE, RESTART THE DESKTOP MANAGER

  You have disconnected your Blackberry to your computer, then install the DCOM98 update and restarted your computer yet?

• I downloaded a trial version of Adobe DC but don't want I want just the free reader. I can't remove it as he advises Adobe application Manager and outlook use the files. I closed, restarted and set it up again, but it does not work. How can I delete

  I downloaded a trial version of Adobe DC but don't want I want just the free reader. I can't remove it as he advises Adobe application Manager and outlook use the files. I closed, restarted and set it up again, but it does not work. How can I remove the program

  Use of the Adobe Creative Cloud cleaning tool to solve installation problems can help

• Stop and restart the cssd on all cluster nodes

  Hello
  
  Release our system to operate under linux Red Hat Enterprise Linux Server 5.3 (Tikanga) 2.6.18 - 128.1.1.el5
  Our ASM is 11.1.0.7.0 block of POWER 2
  Only ASM is clustered. Databases are not.
  2 cluster nodes (Clusterware 11.1.0.7.0)
  
  I have two questions:
  1. we need to stop and start the cssd (crsctl stop crs, crsctl start crs) on both our 2 nodes of clusters.
  In our test group, I stopped first the ASM and dbs all running on 2 nodes
  Then I got arrested and restarded the cssd on the first node, and then on the second node. What is the good order or procedure?
  I noticed after the cssd (crsctl stop crs) stopped the process "/ bin/sh /etc/init.d/init.cssd fatal" was always present. I waited for 30 seconds, but he was always there. Then I restarted the cssd (crsctl start crs) in any case. Why was the fatal process always there? It happened on both nodes. After you restart the cssd, I killed the "/ bin/sh /etc/init.d/init.cssd fatal" on both nodes. He was evidently reappear.
  
  in the event that we want to restart both nodes of the cluster, should 2 - I start by disabling the crs before restart the cluster of 2 knots (crsctl disable crs), and then turn it back on after that 2 linux servers are back (crsctl enable crs)?
  
  Thank you, man

  Hello

  So, for the closure of this thread, which is the appropriate procedure - for them stopping and restarting the cssd on the two cluster 2 node - among the two below:

  1 - do a "crsctl stop Sir' and then 'crsct start crs' on the first node. Then do the same thing on the second node
  2. make a "Sir crsctl stop" on both nodes. Then do 'crsct start crs' on both nodes

  I want to avoid is the two nodes start to restart because of the cssd.

  You can run 'crsctl stop/start' at the same time on both nodes or so as you want (1 or 2), no problem.

  If you start the clusterware on a first node and later the second node, just make sure that all services who were on the first node the second node have been properly resettled on the second node.

  Kind regards
  Levi Pereira

• I use the vista sp2.the Task Manager and the registry editor has mysteriously disabled. How can I activate them?

  I am running vista sp2 and my task manager has been disabled by the administrator. I checked help and he said that I had to enable it via the registry. When I tried to open the registry editor, he said it has been disabled by the administrator. Well, I am the administrator and I've never disabled anything and I don't know how. Can anyone help.thanks

  I also discovered that I can not use the command either line. It is also disabled.

  Hi Mark,
  I know that you said you have linked the virus scanners, but this looks like an attack on your registry... or at least the dll that open your registry database.
  Did you go back with the restore points?
  Sounds like it might be time for a complete wipe and load (format).
  B Eddie

• Hard drive partitioned using its missing data after restarting the system, sharing and management of the computer

  Hello

  I have a Toshiba Satellite with Vista and since my laptop came with only a single 250 GB, i.e. C:\ partition I tried to partition more than I did the following, I had about 90 GB of data to start with which I transferred to a portable hard drive then:

  Panel--> Admin Tools--> computer management--> management disk storage--> right click C:\ Drive and reduce volume--> it showed only 50 GB of space heat shrink and I created a new volume with this space (F:\ 50 GB)--> transferred all the files to the new 50 GB portable HD space F:\ and remaining 40 GB on the drive C:\

  When I started my computer after a few hours, the new partition F:\ was missing! In addition, there was only the C:\ drive of origin with 40 GB data that I had transferred + 45 GB of data I think it was there previously because the installed files.

  C:\ was so now 40 + 45 = 85 GB without a trace of the 50 GB of data on the new partition I created!

  I had recovered my system to a day before before I did it, it could be the reason? Now, when I try to go to System Recovery it does me not an option for a restoration of watch system.

  To be sure, I now have a backup of the 40 GB of data from the C: drive, but I lost the data of 50 GB of the new partition, and since I have not written new data on the drive is possible that it's still there?

  When I try to search for some files I know research shows me the name of the file, but the file does not open, and the location of the file shows that it is not accessible.

  Kindly advise me on what can be done given that 50 GB of data is really important.

  Thank you

  Go to disk management and open it in full screen and then press the PrtScr button.  Go to start / all programs / Accessories / Paint and open the program.  Go to Edition and click on paste.  Then go to file and click on save as and select a .jpg file type and call the disk management and save it to your desktop.

  Then go to http://skydrive.live.com/ (you will have to perhaps sign up and maybe download some programs, but this will give you a free online place where you can store files for others.  Once the page to the top, click on add files and navigate to the file you just save it on your desktop and add it to one of the folders (I suggest the Public folder).  Once it clicked, and information about it will appear at the bottom right, including where exactly the file.  Copy this URL and include it in your next post.  I would like to see what looks like disk management without asking a thousand questions to describe everythhing for me.

  If you did a restore of the system already on the previous day, there is probably no new restore points created since then, so there is no option to do a system restore.  In addition, a system restore would not solve this problem - this is way beyond its capabiliities.

  Download the free EASUS Partition Manager: http://www.partition-tool.com/ and run it to scan your drive and see if it finds anything Disk Manager can not - it "s possible he can pick up our lost F:\ partition or unidentified space which could be this partition but not correctly identified.  In a same, t I would like to see if it detects anything useful (and it can also be useful the fixing of the problem if we can find it).  Moreover, the total space of the C:\ drive is now is what it was before you have shrunk or it it showing the size reduction that you can expect if the new volume had actually been created?  Let me know what you find if anything.

  Right-click on your CD-ROM drive, and then click on change drive letter and paths.  Click on edit and then right click on the drop box for the available letters.  F shows as available or is missing in the list?  Leave it (don't change anything in reality - I just wanted to see if F has shown as available since if it was assigned (such as C: is assigned) should not be shown at the top on the list.)  I would like to know if he was there.

  I hope this helps or at least gives us some clues on how to solve the problem (whatever it is).   Keep me informed.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• You have to restart the computer to activate the keyboard.

  Original title: keyboard problems

  I have to start my computer and then restart it to activate the keyboard. my keyboard is plugged. It has benn going on for 2-3 months. I disconnected and then reconnected everthing.

  Hi David,

  1. what type of keyboard you use? What is a PS2 or USB?

  Step 1:

  You can try to use the keyboard on another computer and check if the problem occurs. You can also use a different keyboard on your computer and check for the issue.

  Step 2:

  If you are using a usb keyboard, you can try to reinstall the usb controllers and check for the issue.

  Step 2: Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc in start search, and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  Hope this information is useful.