Restoration of the CARS (two nodes) DB DB to single node

Similar Questions

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• Restoration of RMAN of the CARS to single Instance on another node with dif NAME DB

  Hi all
  
  We intend to make RMAN RESTORE on the test server, taking the RMAN backup to disk of the production server.
  
  Production server configuration:
  ---------------------------------------------
  
  NAME: genprod
  CARS: 2 node RAC.
  OPERATING SYSTEM: IBM AIX 6.1
  DATABASE VERSION: 10.2.0.4
  
  
  Test server configuration:
  ---------------------------------------
  
  NAME: miguat
  CARS: 2 node RAC.
  OPERATING SYSTEM: IBM AIX 6.1
  DATABASE VERSION: 11.2.0.3
  
  How do RESTORE RMAN of the CARS to single Instance on another node with NAME DB different...
  
  My production database name was "GENPROD"... my test server database has been 'MIGUAT '.
  
  When I do the restoration, I get the following error:
  
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 06/08/2012 13:22:11
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore
  
  
  Please help me with this...
  
  
  Kind regards
  VAMSi...

  Hello

  You can take a look at http://taliphakanozturken.wordpress.com/2012/07/20/how-to-restore-10g-rman-backup-to-11g/

  You will need to change the name of db only after the database was opened after the upgrade and other steps.

  Anand

• I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages

  I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages:

  "Do not create C:\Users\User\AppData\Local\Temp; c:\arc\01Script\FormatUFD.SP' and the messsage "Fail to create.

  How to port HP_recovery in car to my flash drive?

  Windows 7 x 64, HP G62-144DX

  Hello:

  I can't help you with this specific issue, but if you can get it is resolved and you can read the product key 25 character Microsoft Windows on the bottom of your PC, do your own installation of W7 media to reinstall W7.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• SERVICE LISTENS is not on node 2 of the CARS

  I added a SERVICE, srvctl, cluster and it is posted as a RESOURCE and online both nodes

  --------------------------------------------------------------------------------

  Cluster resources

  --------------------------------------------------------------------------------

  ORA.db_name. SRV_NAME.svc

  1 Server1 online online

  2 server2 online online

  ... Unfortunately, the SERVICE appears in the LISTENER on node 1, but not from node2

  [server1] > lsnrctl SERVICES

  .

  .

  Service "SRV_NAME" has 1 instance (s).

  Instance "rac1" READY State, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0 status: ready

  LOCAL SERVER

  [server2] > lsnrctl SERVICES

  Do not display

  The command of the user: srvctl config database-d db_name - one

  .. the service is display and both nodes are displayed

  [server2] > srvctl config database-d wamuat - a

  Unique name of database: DB_NAME

  Name of the database:

  Oracle home: /u03/wamdb/11.2.0

  User Oracle: wamdb

  SPFile: +DG_FRA/DB_NAME1/PARAMETERFILE/spfile.1482.842535585

  Domain:

  Startup options: open

  Stop options: immediate

  Database role: PRIMARY

  Management policy: AUTOMATIC

  Server pools: DB_NAME

  Instances of the databases: Database1, Database2

  Of disk groups: DG_DATA, DG_FRA

  Paths of mount point:

  Services: SRV_NAME

  Type: CARS

  Database is enabled

  Database is managed administrator

  Why the SERVICE is not in the EARPIECE on the NŒUD 2?

  Here is the SYNTAX used; This update is for information about you and all the others who will be or will be able to test this:

  ALTER system set local_listener = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = db_hostname1 - vip)(PORT=1521)))' scope = the two SID = 'Database1';

  ALTER system set local_listener = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = db_hostname2-vip)(PORT=1521)))' scope = the two SID = 'Database2';

  This must be done so that added to the cluster service has been on the listener on both hosts of database server. Thus, this has created high availability expected.

  Best regards and thank you again!

• Need the XQuery function that compares two nodes.

  Is there a any function XQuery for the OSB 10 g which compares two nodes with a correct management of redundant namespaces?
  There is a function "" fn:deep - equality "that compares two nodes." But it fails when one node is to have redundant namespaces as an attribute.
  I need a XQuery function that compares two nodes for the same content, same child nodes and their content, the same attributes of the child nodes except the attribute xmlns for one of the node that has redundant namespaces (namespace that are already defined in the parent nodes or any unnecessary space of names).
  
  for example, it should treat following two equal nodes:
  
  < has t '1' = >
  < xmlns:ns1 b = "ns1" >
  2
  < /b >
  < /a >
  
  
  < has t '1' = >
  < b >
  2
  < /b >
  < /a >
  
  
  Above two nodes are the same attributes and content except 1st node attribute xmlns. Wise business scenario it is redundant but not bad, same case can occur and I need to take care of these scenarios.
  Please let me know about a feature or logic to treat this

  in fact the XMLs 2 you posted are different to a '2 '.

  I tried this:

  XQuery version "1.0" encoding "Cp1252";
  (: pragma type = "xs: anyType" ::))

  declare namespace xf = "http://tempuri.org/OSB%20Project%201/compare/";

  declare function:compare() xf
  {element (*)}

  Let $a: = (t = '3')(b xmlns:ns="ns") 2 (/ b) (/a)
  Let $b: = (a t = "3") (b) 2 / (b) (/a)

  return {fn:deep - equal ($a, $b)}
  };

  XF:Compare()

  and it does not work as expected, it is the additional xmlns:ns = 'ns' are ignored...
  I have real

• now my restoration of the work system - properties - show two drives C: and D: WHY? I want to only show him C: _

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  With all due respect, you are incorrect. You simply did not notice before D drive. D drive is a logical drive. To the best of my knowledge there is no way to prevent it from the show. However, simply disable the system for D drive restore.
  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• two nodes ASM has the same instance name

  Hello

  I created a grid of ASM of two nodes, when the grid facility (11.2.0.1) finish he created the + ASM1 as instance name for my two knots.

  I have install the ORACLE_SID in + ASM1 and + ASM2 node1 and node2, respectively prior to installation.

  What is wrong, I do it for the installation of the grid? Please suggest.

  Thank you

  To create a virtual environment of RAC in VirtualBox or to share devices in an environment of ASM, you should turn off the virtual machine and change devices in VirtualBox using the following command:

  $ VBoxManage modifyhd asmdisk1.vdi - shareable type

  Then you can add the same features and use the disgroups on different nodes of the DSO. BTW, this is rather a question of the use of VirtualBox for which there is a special forum.

• PIN dbms_cube.build jobs parallel to a specific node on the CARS

  Is it possible to Pin dbms_cube.build jobs parallel to a specific node on CARS. Currently, work with say parallelism of 10 bays on all nodes of the RAC.
  
  Is it possible to control for the jobs of the child works on the subset of nodes. Unable to see how we can link to categories of jobs and services with dbms_cube.build.
  
  Any suggestions will be much appreciated.

  JOB_CLASS was added in 11.2.0.2 precisely for this purpose. It is undocumented, because he missed the 11.2.0.1. Deadline for documentation, but it has exactly the same meaning as the job_class parameter in DBMS_SCHEDULER. CREATE_JOB.

• determine if the camera is a camera or two nodes

  Hello world

  is there a way to determine via scripts, if a camera is a camera of a node or a camera of two nodes?

  I tried to check if

  Camera.Property ("ADBE Transform Group"). Property ("Point of Interest")

  is defined, but it doesn't seem to exist also for the cameras of a node that is not a point of interest.

  Best,

  Mathias

  You must use a workaround to check if properties are active. It's the one I use generally:

  activeItem var = app.project.activeItem;

  var cam = activeItem.layer (1);

  var anchProp = cam.property("ADBE_Transform_Group").property ("ADBE Anchor Point");

  point of interest is the anchor.

  var propVisible = true;

  try {}

  anchProp.selected = true;

  } catch (e) {}

  propVisible = false;

  }

  If (propVisible) anchProp.selected = false;

  Alert ("visible property =" + propVisible);

• Color of text in af:tree with the definitions of two nodes

  Hi all
  
  I use JDev 11.1.1.5.0
  
  I have an af:tree component that got two definitions of nodes (two different iterators). I want to display the data in other colors with other icons etc. According to the definition of node.
  

    <tree IterBinding="OrganizacjeGlowneIterator" id="OrganizacjeGlowne">
        <nodeDefinition DefName="proby.model.views.ElorganizacjeView"
                        Name="OrganizacjeGlowne0"
                        TargetIterator="${bindings.OrganizacjeEditIterator}">
          <AttrNames>
            <Item Value="Kod"/>
            <Item Value="Nazwa"/>
            <Item Value="Typorganizacji"/>
          </AttrNames>
          <Accessors>
            <Item Value="ElorganizacjeView"
                  Label="strukturaOrganizacyjnaPageDef_OrganizacjeGlowne_proby.model.views.ElorganizacjeView_ElorganizacjeView"/>
            <Item Value="StanowiskaUsersView"
                  Label="strukturaOrganizacyjnaPageDef_OrganizacjeGlowne_proby.model.views.ElorganizacjeView_StanowiskaUsersView"/>
          </Accessors>
        </nodeDefinition>
        <nodeDefinition DefName="proby.model.views.StanowiskaUsersView"
                        Name="OrganizacjeGlowne1"
                        TargetIterator="${bindings.StanowiskaUsersEditIterator}">
          <AttrNames>
            <Item Value="NazwaStanowiska"/>
            <Item Value="ImieUsera"/>
            <Item Value="NazwiskoUsera"/>
            <Item Value="EmailUsera"/>
          </AttrNames>
          <Accessors>
            <Item Value="StanowiskaUsersView_2"/>
          </Accessors>
        </nodeDefinition>
      </tree> 

  I wanted to use EL in the Style section in the properties of the af Component Inspector: tree, but I don't know how to get the node current definition name.
  How to change color dynamically based on the current definition of node?
  
  Any help will be appreciated.
  
  Kind regards
  Wojtek.

  Hello

  This EL

  #{node.hierTypeBinding.structureDefName}
  

  Returns the name of the name of the View node and package object

  If you could do

  #{node.hierTypeBinding.structureDefName == "proby.model.views.ElorganizacjeView"? Red: white}

  for the nodes of color code

  Frank

• TreeView: Line white between the two nodes are not appear

  Hi all

  I added a treeview control in my dialog plugin for InDesign CS3 and CS4.

  In CS4, it works fine but in CS3, I get a strange question.

  Question: A blank line between two nodes may not appear. See the image below

  I am referring to the white line which we can see in the InDesign paragraph style palette / all indesign sample as the Board treeview as shown below

  I tried this problem but has not found a solution

  Please help me solve this problem.

  Kind regards

  Alam

  I had a similar problem, but in the end, I couldn't figure how to remove the white lines.

  I have given up trying to remove the white and just changed the color of the treeview and everything that was drawn on the top in white.

  It was the only way I managed to hide lines.

• Two questions regarding the restoration of the system.

  If you restore a computer to the factoy setting, it should get rid of any virus or spyware that is on this computer?

  Is it normal that the text and graphics to appear a bit odd during the restoration of the system, it seems that the resolution is not terrible.

  Thanks in advance.

  Hello

  There are some malicious programs that can survive even a format and a facility so if your restoration or
  Recovery has been infected certainly the malware might still be in the game. Did you use a Restore Point
  who she returned to a shortwhile ago, or do a restore to the new factory
  installation? A restoration is most likely still infected only once.

  The video driver may need to be updated.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================

  If you need to search for malware:

  No one program cannot be used to detect and remove any malware. Added that often easy to
  detect malware is often accompanied by a much more difficult to detect and remove the payload. If its
  better to be too full now than to pay the price much later. Check with these extreme
  Overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  It's here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Recover + restore and backup CARS

  Hello
  
  I tried in the last days RAC RMAN backups on disks!
  
  I have two node RAC - Systems Version 11.2.0.2 on Linux Redhat 5.4 X 86 - 64.
  
  + Node names stb, dwh
  + Name of the database: RAC
  +-The instance name 1: RAC1 on stb
  + Name of instance 2: RAC2 on dwh
  + Database catalog CATDB on stb
  + ASM-Volumm groups of DATA, FLASH
  
  RAC database has been configured with RMAN in CATDB:
  
  RMAN > set DBID 2329313036
  
  executing command: SET DBID
  his name is 'CARS' and DBID is 2329313036
  
  RMAN > show all.
  
  Database with RMAN db_unique_name configuration parameters are:
  CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; # by default
  CONFIGURE BACKUP OPTIMIZATION
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  SET UP THE DEVICE TYPE DISK PARALLELISM 2 TYPE OF BACKUP BACKUPSET.
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE CHANNEL DEVICE TYPE DISK CONNECT 1 ' * sys/psw@RAC1*';
  CHANNEL to CONFIGURE 2 DEVICE TYPE DISK CONNECT ' * sys/psw@RAC2*';
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
  
  RMAN > DATABASE INCREMENTAL LEVEL 0 BACKUP;
  
  RMAN > list backup;
  
  
  List of backup sets
  ===================
  
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  Incr 156 0 M DISK 00:01:10 408,46 January 26, 11
  BP key: 161 status: AVAILABLE Tablet: NO Tag: TAG20110126T151554
  Part name: +FLASH/rac/backupset/2011_01_26/nnndn0_tag20110126t151554_0.267.741453361
  List of defined backup data files 156
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  2 0 1164421 +DATA/rac/datafile/sysaux.257.741330851 incr 26 January 11
  3 0 incr 1164421 +DATA/rac/datafile/undotbs1.258.741330851 26 January 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  Incr 157 0 M DISK 00:01:17 668,51 26 January 11
  BP key: 162 situation: AVAILABLE Tablet: NO Tag: TAG20110126T151554
  Part name: +FLASH/rac/backupset/2011_01_26/nnndn0_tag20110126t151554_0.266.741453357
  List of defined backup data files 157
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  1 0 incr 1164414 +DATA/rac/datafile/system.256.741330849 26 January 11
  4 0 incr 1164414 +DATA/rac/datafile/users.259.741330851 26 January 11
  5 0 incr 1164414 +DATA/rac/datafile/example.264.741331067 26 January 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  158 full 17.70 M DISK 00:00:09 26 January 11
  BP key: 163 situation: AVAILABLE Tablet: NO Tag: TAG20110126T151723
  Part name: +FLASH/rac/autobackup/2011_01_26/s_741453443.268.741453451
  SPFILE included: Modification Date: January 26, 11
  SPFILE db_unique_name: CARS
  Control file included: cash SNA: 1164584 cash time: 26 January 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  159 full 17,70 M DISC 10:00:00 January 27, 11
  BP key: 164 Situation: AVAILABLE Tablet: NO Tag: TAG20110127T170842
  Part name: +FLASH/rac/autobackup/2011_01_27/s_741546522.260.741546531
  SPFILE included: Date modified: 27 January 11
  SPFILE db_unique_name: CARS
  Control file included: cash SNA: 1249721 cash time: 27 January 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  160 full 17.70 M DISK 00:00:10 January 28, 11
  BP key: 165 situation: AVAILABLE Tablet: NO Tag: TAG20110128T161437
  Part name: +FLASH/rac/autobackup/2011_01_28/s_741629677.282.741629687
  SPFILE included: Modification Date: 28 January 11
  SPFILE db_unique_name: CARS
  Control file included: cash SNA: 1325174 cash time: January 28, 11
  
  RMAN >
  
  The backup worked and looked good.
  
  After that, I removed all the subdirectories + DATA/PAP/in ASM with ASMCMD and I tried to rebuild the CARS database.
  
  SPFile restore failed with:
  
  
  RMAN > restore spfile to tag TAG20110128T161437;
  
  From restoration to February 20, 11
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 20/02/2011 13:44:57
  RMAN-12001: could not open the channel ORA_DISK_1
  RMAN-10008: could not create context channel
  RMAN-10003: unable to connect to the target database
  ORA-12514: TNS:listener is not currently of service requested in connect descriptor
  
  RMAN > quit
  
  
  Ist of reason:
  
  / Home/grid > lsnrctl status
  
  LSNRCTL for Linux: Version 11.2.0.2.0 - Production on February 20, 2011 14:40:49
  
  Copyright (c) 1991, 2010, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
  Start date February 20, 2011 10:16:52
  Uptime 0 days 4 h 23 min 57 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/11.2.0.2/grid/network/admin/listener.ora file
  The listener log file /U01/app/grid/diag/tnslsnr/STB/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.2.5) (PORT = 1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.2.15) (PORT = 1521)))
  Summary of services...
  Service '+ ASM' a 1 instance (s).
  Instance '+ ASM1' READY State, has 1 operation for this service...
  'CARS' service has 1 instance (s).
  Instance "RAC1", BLOCKED status, a 1 operation for this service...
  Service "STRM" has 1 instance (s).
  Instance "STRM1" READY State, has 1 operation for this service...
  Service 'STRMXDB' has 1 instance (s).
  Instance "STRM1" READY State, has 1 operation for this service...
  Service 'TESTDB' is 1 instance (s).
  Instance "TESTDB", State LOAN, has 1 operation for this service...
  Service 'TESTDBXDB' has 1 instance (s).
  Instance "TESTDB", State LOAN, has 1 operation for this service...
  Service 'catdb' has 1 instance (s).
  Instance "catdb' READY State, has 1 operation for this service...
  Service 'catdbXDB' has 1 instance (s).
  Instance "catdb' READY State, has 1 operation for this service...
  The command completed successfully
  
  
  RAC1 ist now blocked.
  
  TNSNAMES. ORA:
  
  /U01/app/Oracle/product/11.2.0.2/Db_1/network/admin > discovers tnsnames.ora
  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0.2/db_1/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  RAC =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = RAC)
  )
  )
  
  STRM =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = STRM)
  )
  )
  
  OLAP =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = OLAP)
  )
  )
  
  RAC2 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = RAC)
  )
  )
  
  RAC1 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = RAC)
  )
  )
  
  CATDB =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = stb) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = catdb)
  )
  )
  
  REPORT =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = REPORT)
  )
  )
  
  LISTENERS_SCAN =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.11)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.12)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.13)(PORT = 1521))
  )
  
  OLTP =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = scan.cluster.it.de) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = OLTP)
  )
  )
  
  
  
  
  What have I done wrong? Can any Expert help me find a solution?
  
  Thanks and greetings
  
  hqt200475

  Hello

  Please when post msg/log/error/scripts using '{code}' formatting options described in the FAQ.

  http://forums.Oracle.com/forums/help.jspa

  + Node names stb, dwh
  + Name of the database: RAC
  +-The instance name 1: RAC1 on stb
  + Name of instance 2: RAC2 on dwh
  + Database catalog CATDB on stb
  + ASM-Volumm groups of DATA, FLASH

  RAC database has been configured with RMAN in CATDB:

   RMAN> set DBID 2329313036
  
   executing command: SET DBID
   database name is "RAC" and DBID is 2329313036
  

   RMAN> BACKUP   INCREMENTAL LEVEL 0 DATABASE;
  
   RMAN> list backup;
  
   List of Backup Sets
   ===================
  
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
   ------- ---- -- ---------- ----------- ------------ ---------------
   158     Full    17.70M     DISK        00:00:09     26-JAN-11
           BP Key: 163   Status: AVAILABLE  Compressed: NO  Tag: TAG20110126T151723
           Piece Name: +FLASH/rac/autobackup/2011_01_26/s_741453443.268.741453451
     SPFILE Included: Modification time: 26-JAN-11
     SPFILE db_unique_name: RAC
     Control File Included: Ckp SCN: 1164584      Ckp time: 26-JAN-11
  
   BS Key  Type LV Size       Device Type Elapsed Time Completion Time
   ------- ---- -- ---------- ----------- ------------ ---------------
   159     Full    17.70M     DISK        00:00:10     27-JAN-11
           BP Key: 164   Status: AVAILABLE  Compressed: NO  Tag: TAG20110127T170842
           Piece Name: +FLASH/rac/autobackup/2011_01_27/s_741546522.260.741546531
     SPFILE Included: Modification time: 27-JAN-11
     SPFILE db_unique_name: RAC
     Control File Included: Ckp SCN: 1249721      Ckp time: 27-JAN-11
  
   BS Key  Type LV Size       Device Type Elapsed Time Completion Time
   ------- ---- -- ---------- ----------- ------------ ---------------
   160     Full    17.70M     DISK        00:00:10     28-JAN-11
           BP Key: 165   Status: AVAILABLE  Compressed: NO  Tag: TAG20110128T161437
           Piece Name: +FLASH/rac/autobackup/2011_01_28/s_741629677.282.741629687
     SPFILE Included: Modification time: 28-JAN-11
     SPFILE db_unique_name: RAC
     Control File Included: Ckp SCN: 1325174      Ckp time: 28-JAN-11
  
   RMAN>
  

  The backup worked and looked good.

  After that, I removed all the subdirectories + DATA/PAP/in ASM with ASMCMD and I tried to rebuild the CARS database.

  SPFile restore failed with:

   RMAN> restore spfile from tag TAG20110128T161437;
  
   Starting restore at 20-FEB-11
   RMAN-00571: ===========================================================
   RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
   RMAN-00571: ===========================================================
   RMAN-03002: failure of restore command at 02/20/2011 13:44:57
   RMAN-12001: could not open channel ORA_DISK_1
   RMAN-10008: could not create channel context
   RMAN-10003: unable to connect to target database
   ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
  
   RMAN> quit
    
  

  What have I done wrong? Can any Expert help me find a solution?

  Everything you need is available as because you are restoring on site. That is, rman target / catalog xxx@xxxx

  Follow these steps:

  START a dummy Instance to run restore SPFILE with RMAN. This is necessary because rman are not running restore without instance.

  for example

  cd $ORACLE_HOME/dbs
  
  Just make a backup of current INIT.
  
  cp initRAC1.ora initRAC1.ora_curr
  

  export ORACLE_SID=RAC1
  
  rman target / catalog xxxx@xxxx/xxxx
  
  RMAN>  set DBID 2329313036; # This identifies in the catalog which database is used.
  
  # Now startup a dummy instance and perfom you restore.
  
  RMAN >  run{
   startup nomount;
  # Use one of the three options:
   restore spfile from tag "TAG20110128T161437";
  # or
   restore spfile from autobackup;
  # or
   restore spfile from '+FLASH/rac/autobackup/2011_01_28/s_741629677.282.741629687';
  shutdown immediate;
  
  startup nomount;
  
  restore controlfile from autobackup;
  
  startup mount;
  
  restore database;
  
  recover database;
  
  alter database open resetlogs;
  
  }
  

  Your spfile will be restored to $ORACLE_HOME/dbs, you should move it to before ASM.

  Kind regards
  Levi Pereira

• Error ORA-17503 at the start of the instance data in the CARS

  Hello!

  I installed Oracle 11 g SE (11.2.0.4) with CARS with 2 nodes on RedHat 7.1 with separation of roles (grid and oracle db run under different users)

  Just after installation it worked, I was able to connect to the database, create a table and see it on the two nodes of the RAC.

  But after restarting the servers, I can not make it works again

  Maybe someone could help me understand what I am doing wrong?

  When I'm trying to start a database on the vm-ora-05 node instance, I get this:

  sqlplus/nolog

  01:35:22 @: > connect / as sysdba

  Connect to an instance is idle.

  01:35:28 SYS @ racdba1: > start

  ORA-01078: failure in the treatment of system settings

  ORA-01565: error in the identification of file "+ DATA/racdba/spfileracdba.ora".

  ORA-17503: ksfdopn:2 could not open the file +DATA/racdba/spfileracdba.ora

  ORA-12547: TNS: lost contact

  01:35:32 SYS @ racdba1: >

  **********************************

  Environment variables for GRID

  ORACLE_HOME=/U01/app/11.2.0.4/grid

  ORACLE_SID = + ASM1

  Environment variables for Oracle DB

  ORACLE_HOME=/U01/app/Oracle/11.2.0.4/rachome1

  ORACLE_SID = racdba1

  **********************************

  If I check the status of the disk groups and +DATA/racdba/spfileracdba.ora asmcmd file it seems to be Ok (for me at least)

  [grid of grid@+ASM1] $asmcmd

  ORACLE_SID = [+ ASM1]?

  The Oracle base remains unchanged with the value/u01/app/oracle

  [+] ASMCMD > lsdg

  State Type sector Rebal to Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files name of the block

  EXTERN MOUNTED N 512 4096 1048576 5121 4725 0 4725 0 SRC /.

  EXTERN MOUNTED N 512 4096 4194304 153596 151240 0 151240 0 N DATA.

  EXTERN MOUNTED N 512 4096 4194304 153596 153020 0 153020 0 N FRA.

  ASMCMD [+] > ls-l +DATA/racdba/spfileracdba.ora

  Name of type Redund time scratched Sys

  N spfileracdba.ora = > +DATA/RACDBA/PARAMETERFILE/spfile.267.894291829

  ASMCMD [+] > ls-l +DATA/RACDBA/PARAMETERFILE/spfile.267.894291829

  Name of type Redund time scratched Sys

  Fichier_parametres UNPROT COARSE NOV 03 01:00 Y spfile.267.894291829

  **********************************

  At the same time, do not know why oracleasm scandisks/listdisks appear not all discs...

  [root@vm-ora-05 Diba] # / usr/sbin/oracleasm scandisks

  Reload from disk partitions: fact

  Cleaning up stale ASM disks...

  ASM disks scanning system...

  [root@vm-ora-05 Diba] # / usr/sbin/oracleasm listdisks

  [root@vm-ora-05 Diba] #.

  **********************************

  Here is the result of the res stat-[NULL] crsctl you and crsctl check cluster

  [grid@+ASM1 grid] $crsctl res stat - you

  --------------------------------------------------------------------------------

  TARGET STATE SERVER STATE_DETAILS NAME

  --------------------------------------------------------------------------------

  Local resources

  --------------------------------------------------------------------------------

  ORA. CRS.dg

  Vm-ora-05 online

  ORA. DATA.dg

  Vm-ora-05 online

  ORA. FRA.dg

  Vm-ora-05 online

  ORA. LISTENER.lsnr

  Vm-ora-05 online

  ORA.asm

  LINE Started vm-ora-05 online

  ORA. GSD

  In offline mode offline vm-ora-05

  ORA.net1.Network

  Vm-ora-05 online

  ORA.ons

  Vm-ora-05 online

  --------------------------------------------------------------------------------

  Cluster resources

  --------------------------------------------------------------------------------

  ORA. LISTENER_SCAN1. LSNR

  1 vm-ora-05 online

  ORA. CVU

  1 vm-ora-05 online

  ORA. OC4J

  1 vm-ora-05 online

  ORA.racdba.db

  1 stop an Instance offline online

  Terminating the Instance offline in LINE 2

  ORA.scan1.VIP

  1 vm-ora-05 online

  Ora - ora. VM - 05.vip

  1 vm-ora-05 online

  Ora - ora. VM - 06.vip

  1 in LINE THROUGH MORE out of vm-ora-05

  [grid@+ASM1 grid] $crsctl check cluster

  CRS-4537: Cluster Ready Services is online

  CRS-4529: Cluster Synchronization Services is online

  CRS-4533: Event Manager is online

  [grid@+ASM1 grid] $

  Please help, this problem makes me crazy)

  -rwxr-x---x 1 grid 209854149 28 Oct 02:10 /u01/app/11.2.0.4/grid/bin/oracle oinstall

  ^ ^ This x must do for setuid/setguid not x for execute

  Check the docs on setuid/setguid and this note:

  ASM login fails with ORA-12547: TNS: lost contact (Doc ID 1942740.1)
  https://docs.Oracle.com/CD/E19683-01/816-4883/secfile-69/index.html

  This should solve the problem:

  /U01/app/11.2.0.4/grid/bin/Oracle chmod 6751

  Concerning

  Thomas